linux/arch/arm/mach-sa1100/generic.h
Linus Walleij efdfeb079c
regulator: fixed: Convert to use GPIO descriptor only
As we augmented the regulator core to accept a GPIO descriptor instead
of a GPIO number, we can augment the fixed GPIO regulator to look up
and pass that descriptor directly from device tree or board GPIO
descriptor look up tables.

Some boards just auto-enumerate their fixed regulator platform devices
and I have assumed they get names like "fixed-regulator.0" but it's
pretty hard to guess this. I need some testing from board maintainers to
be sure. Other boards are straight forward, using just plain
"fixed-regulator" (ID -1) or "fixed-regulator.1" hammering down the
device ID.

It seems the da9055 and da9211 has never got around to actually passing
any enable gpio into its platform data (not the in-tree code anyway) so we
can just decide to simply pass a descriptor instead.

The fixed GPIO-controlled regulator in mach-pxa/ezx.c was confusingly named
"*_dummy_supply_device" while it is a very real device backed by a GPIO
line. There is nothing dummy about it at all, so I renamed it with the
infix *_regulator_* as part of this patch set.

Intel MID portions tested by Andy.

Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Check the x86 BCM stuff
Acked-by: Tony Lindgren <tony@atomide.com> # OMAP1,2,3 maintainer
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-17 14:32:22 -07:00

59 lines
1.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* linux/arch/arm/mach-sa1100/generic.h
*
* Author: Nicolas Pitre
*/
#include <linux/cpufreq.h>
#include <linux/reboot.h>
extern void sa1100_timer_init(void);
extern void __init sa1100_map_io(void);
extern void __init sa1100_init_irq(void);
extern void __init sa1100_init_gpio(void);
extern void sa11x0_restart(enum reboot_mode, const char *);
extern void sa11x0_init_late(void);
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
mi->bank[__nr].size = (__size)
extern void sa1110_mb_enable(void);
extern void sa1110_mb_disable(void);
extern struct cpufreq_frequency_table sa11x0_freq_table[];
extern unsigned int sa11x0_getspeed(unsigned int cpu);
struct flash_platform_data;
struct resource;
void sa11x0_register_mtd(struct flash_platform_data *flash,
struct resource *res, int nr);
struct irda_platform_data;
void sa11x0_register_irda(struct irda_platform_data *irda);
struct mcp_plat_data;
void sa11x0_ppc_configure_mcp(void);
void sa11x0_register_mcp(struct mcp_plat_data *data);
struct sa1100fb_mach_info;
void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
#ifdef CONFIG_PM
int sa11x0_pm_init(void);
#else
static inline int sa11x0_pm_init(void) { return 0; }
#endif
int sa11xx_clk_init(void);
struct gpiod_lookup_table;
void sa11x0_register_pcmcia(int socket, struct gpiod_lookup_table *);
struct fixed_voltage_config;
struct regulator_consumer_supply;
int sa11x0_register_fixed_regulator(int n, struct fixed_voltage_config *cfg,
struct regulator_consumer_supply *supplies, unsigned num_supplies,
bool uses_gpio);