linux/drivers/clocksource/time-orion.c
Ezequiel Garcia 0a54a06958 clocksource: orion: Use atomic access for shared registers
Replace the driver-specific thread-safe shared register API
by the recently introduced atomic_io_clear_set().

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-11 23:05:02 +01:00

143 lines
3.9 KiB
C

/*
* Marvell Orion SoC timer handling.
*
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* Timer 0 is used as free-running clocksource, while timer 1 is
* used as clock_event_device.
*/
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/spinlock.h>
#include <linux/sched_clock.h>
#define TIMER_CTRL 0x00
#define TIMER0_EN BIT(0)
#define TIMER0_RELOAD_EN BIT(1)
#define TIMER1_EN BIT(2)
#define TIMER1_RELOAD_EN BIT(3)
#define TIMER0_RELOAD 0x10
#define TIMER0_VAL 0x14
#define TIMER1_RELOAD 0x18
#define TIMER1_VAL 0x1c
#define ORION_ONESHOT_MIN 1
#define ORION_ONESHOT_MAX 0xfffffffe
static void __iomem *timer_base;
/*
* Free-running clocksource handling.
*/
static u64 notrace orion_read_sched_clock(void)
{
return ~readl(timer_base + TIMER0_VAL);
}
/*
* Clockevent handling.
*/
static u32 ticks_per_jiffy;
static int orion_clkevt_next_event(unsigned long delta,
struct clock_event_device *dev)
{
/* setup and enable one-shot timer */
writel(delta, timer_base + TIMER1_VAL);
atomic_io_modify(timer_base + TIMER_CTRL,
TIMER1_RELOAD_EN | TIMER1_EN, TIMER1_EN);
return 0;
}
static void orion_clkevt_mode(enum clock_event_mode mode,
struct clock_event_device *dev)
{
if (mode == CLOCK_EVT_MODE_PERIODIC) {
/* setup and enable periodic timer at 1/HZ intervals */
writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD);
writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL);
atomic_io_modify(timer_base + TIMER_CTRL,
TIMER1_RELOAD_EN | TIMER1_EN,
TIMER1_RELOAD_EN | TIMER1_EN);
} else {
/* disable timer */
atomic_io_modify(timer_base + TIMER_CTRL,
TIMER1_RELOAD_EN | TIMER1_EN, 0);
}
}
static struct clock_event_device orion_clkevt = {
.name = "orion_event",
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
.shift = 32,
.rating = 300,
.set_next_event = orion_clkevt_next_event,
.set_mode = orion_clkevt_mode,
};
static irqreturn_t orion_clkevt_irq_handler(int irq, void *dev_id)
{
orion_clkevt.event_handler(&orion_clkevt);
return IRQ_HANDLED;
}
static struct irqaction orion_clkevt_irq = {
.name = "orion_event",
.flags = IRQF_TIMER,
.handler = orion_clkevt_irq_handler,
};
static void __init orion_timer_init(struct device_node *np)
{
struct clk *clk;
int irq;
/* timer registers are shared with watchdog timer */
timer_base = of_iomap(np, 0);
if (!timer_base)
panic("%s: unable to map resource\n", np->name);
clk = of_clk_get(np, 0);
if (IS_ERR(clk))
panic("%s: unable to get clk\n", np->name);
clk_prepare_enable(clk);
/* we are only interested in timer1 irq */
irq = irq_of_parse_and_map(np, 1);
if (irq <= 0)
panic("%s: unable to parse timer1 irq\n", np->name);
/* setup timer0 as free-running clocksource */
writel(~0, timer_base + TIMER0_VAL);
writel(~0, timer_base + TIMER0_RELOAD);
atomic_io_modify(timer_base + TIMER_CTRL,
TIMER0_RELOAD_EN | TIMER0_EN,
TIMER0_RELOAD_EN | TIMER0_EN);
clocksource_mmio_init(timer_base + TIMER0_VAL, "orion_clocksource",
clk_get_rate(clk), 300, 32,
clocksource_mmio_readl_down);
sched_clock_register(orion_read_sched_clock, 32, clk_get_rate(clk));
/* setup timer1 as clockevent timer */
if (setup_irq(irq, &orion_clkevt_irq))
panic("%s: unable to setup irq\n", np->name);
ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ;
orion_clkevt.cpumask = cpumask_of(0);
orion_clkevt.irq = irq;
clockevents_config_and_register(&orion_clkevt, clk_get_rate(clk),
ORION_ONESHOT_MIN, ORION_ONESHOT_MAX);
}
CLOCKSOURCE_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);