linux/drivers/i2c
Michael Trimarchi dc1972d027 i2c: Fix stuck transaction on cpm-i2c driver
When a process tries to read/write a disconnected i2c device, it receives a signal (e.g. ctrl-c) and the kernel gets stuck.

BUG: soft lockup - CPU#0 stuck for 61s! [I2CEEpromTest:392]
NIP: c01628f8 LR: c01628f0 CTR: c00177cc
REGS: c39abd70 TRAP: 0901   Not tainted  (2.6.25.7-alcore)
MSR: 00009032 <EE,ME,IR,DR>  CR: 42042048  XER: 20000000
TASK = c3889bd0[392] 'I2CEEpromTest' THREAD: c39aa000
GPR00: 00009000 c39abe20 c3889bd0 c39075c8 c39abe28 00000001 00000000 00000001
GPR08: c3889bd0 c39075c8 00009032 c39abe34 00002437
NIP [c01628f8] cpm_i2c_xfer+0x5fc/0x6d0
LR [c01628f0] cpm_i2c_xfer+0x5f4/0x6d0
Call Trace:
[c39abe20] [c0162924] cpm_i2c_xfer+0x628/0x6d0 (unreliable)
[c39abe90] [c015f6a0] i2c_transfer+0x88/0xb4
[c39abeb0] [c0160164] i2c_master_recv+0x48/0x6c
[c39abed0] [c01618dc] i2cdev_read+0x50/0xe4
[c39abef0] [c0068b24] vfs_read+0xc4/0x108
[c39abf10] [c0068f4c] sys_read+0x4c/0x90
[c39abf40] [c000d348] ret_from_syscall+0x0/0x38
Instruction dump:
3bc00064 92610010 3bf201c8 92810014 3b61

This happen because though the wait_event_interruptible_timeout takes the
signals into account, the driver does not handle them.
We propose to change the wait_event_interruptible_timeout with
wait_event_timeout, leaving the signals to be handled in other points
on the upper layers.

Signed-off-by: Bruno Morelli <bruno@evidence.eu.com>
Signed-off-by: Michael Trimarchi <michael@evidence.eu.com>
Acked-by: Jochen Friedrich <jochen@scram.de>
[ben-linux@fluff.org: fix title for patch]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22 01:43:32 +01:00
..
algos i2c-algo-pca: Let PCA9564 recover from unacked data byte (state 0x30) 2009-05-05 08:39:25 +02:00
busses i2c: Fix stuck transaction on cpm-i2c driver 2009-06-22 01:43:32 +01:00
chips i2c/chips: Move max6875 to drivers/misc/eeprom 2009-06-15 18:01:49 +02:00
i2c-boardinfo.c i2c: Use rwsem instead of mutex for board info 2009-06-19 16:58:20 +02:00
i2c-core.c i2c: Use rwsem instead of mutex for board info 2009-06-19 16:58:20 +02:00
i2c-core.h i2c: Use rwsem instead of mutex for board info 2009-06-19 16:58:20 +02:00
i2c-dev.c i2c-dev: Clarify the unit of ioctl I2C_TIMEOUT 2009-02-24 19:19:49 +01:00
Kconfig i2c: Let users select algorithm drivers manually again 2008-08-10 22:56:15 +02:00
Makefile i2c: Add i2c_board_info and i2c_new_device() 2007-05-01 23:26:31 +02:00