mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 00:21:59 +00:00
412a05d6a9
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>: The first part of the series (patches 1 to 7) is an introduction of a new helper followed by the user conversion. This consolidates the same code and also makes patch 8 (last one) be localised to the SPI core part. The last patch is the main rework to get rid of a recently introduced hack with a dummy SG list and move to the transfer-based DMA mapped flag. That said, the patches 1 to 7 may be applied right away since they have no functional change intended, while the last one needs more testing and reviewing.
1676 lines
43 KiB
C
1676 lines
43 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* OMAP2 McSPI controller driver
|
|
*
|
|
* Copyright (C) 2005, 2006 Nokia Corporation
|
|
* Author: Samuel Ortiz <samuel.ortiz@nokia.com> and
|
|
* Juha Yrjola <juha.yrjola@nokia.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/gcd.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include "internals.h"
|
|
|
|
#include <linux/platform_data/spi-omap2-mcspi.h>
|
|
|
|
#define OMAP2_MCSPI_MAX_FREQ 48000000
|
|
#define OMAP2_MCSPI_MAX_DIVIDER 4096
|
|
#define OMAP2_MCSPI_MAX_FIFODEPTH 64
|
|
#define OMAP2_MCSPI_MAX_FIFOWCNT 0xFFFF
|
|
#define SPI_AUTOSUSPEND_TIMEOUT 2000
|
|
|
|
#define OMAP2_MCSPI_REVISION 0x00
|
|
#define OMAP2_MCSPI_SYSSTATUS 0x14
|
|
#define OMAP2_MCSPI_IRQSTATUS 0x18
|
|
#define OMAP2_MCSPI_IRQENABLE 0x1c
|
|
#define OMAP2_MCSPI_WAKEUPENABLE 0x20
|
|
#define OMAP2_MCSPI_SYST 0x24
|
|
#define OMAP2_MCSPI_MODULCTRL 0x28
|
|
#define OMAP2_MCSPI_XFERLEVEL 0x7c
|
|
|
|
/* per-channel banks, 0x14 bytes each, first is: */
|
|
#define OMAP2_MCSPI_CHCONF0 0x2c
|
|
#define OMAP2_MCSPI_CHSTAT0 0x30
|
|
#define OMAP2_MCSPI_CHCTRL0 0x34
|
|
#define OMAP2_MCSPI_TX0 0x38
|
|
#define OMAP2_MCSPI_RX0 0x3c
|
|
|
|
/* per-register bitmasks: */
|
|
#define OMAP2_MCSPI_IRQSTATUS_EOW BIT(17)
|
|
|
|
#define OMAP2_MCSPI_MODULCTRL_SINGLE BIT(0)
|
|
#define OMAP2_MCSPI_MODULCTRL_MS BIT(2)
|
|
#define OMAP2_MCSPI_MODULCTRL_STEST BIT(3)
|
|
|
|
#define OMAP2_MCSPI_CHCONF_PHA BIT(0)
|
|
#define OMAP2_MCSPI_CHCONF_POL BIT(1)
|
|
#define OMAP2_MCSPI_CHCONF_CLKD_MASK (0x0f << 2)
|
|
#define OMAP2_MCSPI_CHCONF_EPOL BIT(6)
|
|
#define OMAP2_MCSPI_CHCONF_WL_MASK (0x1f << 7)
|
|
#define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY BIT(12)
|
|
#define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY BIT(13)
|
|
#define OMAP2_MCSPI_CHCONF_TRM_MASK (0x03 << 12)
|
|
#define OMAP2_MCSPI_CHCONF_DMAW BIT(14)
|
|
#define OMAP2_MCSPI_CHCONF_DMAR BIT(15)
|
|
#define OMAP2_MCSPI_CHCONF_DPE0 BIT(16)
|
|
#define OMAP2_MCSPI_CHCONF_DPE1 BIT(17)
|
|
#define OMAP2_MCSPI_CHCONF_IS BIT(18)
|
|
#define OMAP2_MCSPI_CHCONF_TURBO BIT(19)
|
|
#define OMAP2_MCSPI_CHCONF_FORCE BIT(20)
|
|
#define OMAP2_MCSPI_CHCONF_FFET BIT(27)
|
|
#define OMAP2_MCSPI_CHCONF_FFER BIT(28)
|
|
#define OMAP2_MCSPI_CHCONF_CLKG BIT(29)
|
|
|
|
#define OMAP2_MCSPI_CHSTAT_RXS BIT(0)
|
|
#define OMAP2_MCSPI_CHSTAT_TXS BIT(1)
|
|
#define OMAP2_MCSPI_CHSTAT_EOT BIT(2)
|
|
#define OMAP2_MCSPI_CHSTAT_TXFFE BIT(3)
|
|
|
|
#define OMAP2_MCSPI_CHCTRL_EN BIT(0)
|
|
#define OMAP2_MCSPI_CHCTRL_EXTCLK_MASK (0xff << 8)
|
|
|
|
#define OMAP2_MCSPI_WAKEUPENABLE_WKEN BIT(0)
|
|
|
|
/* We have 2 DMA channels per CS, one for RX and one for TX */
|
|
struct omap2_mcspi_dma {
|
|
struct dma_chan *dma_tx;
|
|
struct dma_chan *dma_rx;
|
|
|
|
struct completion dma_tx_completion;
|
|
struct completion dma_rx_completion;
|
|
|
|
char dma_rx_ch_name[14];
|
|
char dma_tx_ch_name[14];
|
|
};
|
|
|
|
/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
|
|
* cache operations; better heuristics consider wordsize and bitrate.
|
|
*/
|
|
#define DMA_MIN_BYTES 160
|
|
|
|
|
|
/*
|
|
* Used for context save and restore, structure members to be updated whenever
|
|
* corresponding registers are modified.
|
|
*/
|
|
struct omap2_mcspi_regs {
|
|
u32 modulctrl;
|
|
u32 wakeupenable;
|
|
struct list_head cs;
|
|
};
|
|
|
|
struct omap2_mcspi {
|
|
struct completion txdone;
|
|
struct spi_controller *ctlr;
|
|
/* Virtual base address of the controller */
|
|
void __iomem *base;
|
|
unsigned long phys;
|
|
/* SPI1 has 4 channels, while SPI2 has 2 */
|
|
struct omap2_mcspi_dma *dma_channels;
|
|
struct device *dev;
|
|
struct omap2_mcspi_regs ctx;
|
|
struct clk *ref_clk;
|
|
int fifo_depth;
|
|
bool target_aborted;
|
|
unsigned int pin_dir:1;
|
|
size_t max_xfer_len;
|
|
u32 ref_clk_hz;
|
|
bool use_multi_mode;
|
|
};
|
|
|
|
struct omap2_mcspi_cs {
|
|
void __iomem *base;
|
|
unsigned long phys;
|
|
int word_len;
|
|
u16 mode;
|
|
struct list_head node;
|
|
/* Context save and restore shadow register */
|
|
u32 chconf0, chctrl0;
|
|
};
|
|
|
|
static inline void mcspi_write_reg(struct spi_controller *ctlr,
|
|
int idx, u32 val)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
|
|
writel_relaxed(val, mcspi->base + idx);
|
|
}
|
|
|
|
static inline u32 mcspi_read_reg(struct spi_controller *ctlr, int idx)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
|
|
return readl_relaxed(mcspi->base + idx);
|
|
}
|
|
|
|
static inline void mcspi_write_cs_reg(const struct spi_device *spi,
|
|
int idx, u32 val)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
|
|
writel_relaxed(val, cs->base + idx);
|
|
}
|
|
|
|
static inline u32 mcspi_read_cs_reg(const struct spi_device *spi, int idx)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
|
|
return readl_relaxed(cs->base + idx);
|
|
}
|
|
|
|
static inline u32 mcspi_cached_chconf0(const struct spi_device *spi)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
|
|
return cs->chconf0;
|
|
}
|
|
|
|
static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
|
|
cs->chconf0 = val;
|
|
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val);
|
|
mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
|
|
}
|
|
|
|
static inline int mcspi_bytes_per_word(int word_len)
|
|
{
|
|
if (word_len <= 8)
|
|
return 1;
|
|
else if (word_len <= 16)
|
|
return 2;
|
|
else /* word_len <= 32 */
|
|
return 4;
|
|
}
|
|
|
|
static void omap2_mcspi_set_dma_req(const struct spi_device *spi,
|
|
int is_read, int enable)
|
|
{
|
|
u32 l, rw;
|
|
|
|
l = mcspi_cached_chconf0(spi);
|
|
|
|
if (is_read) /* 1 is read, 0 write */
|
|
rw = OMAP2_MCSPI_CHCONF_DMAR;
|
|
else
|
|
rw = OMAP2_MCSPI_CHCONF_DMAW;
|
|
|
|
if (enable)
|
|
l |= rw;
|
|
else
|
|
l &= ~rw;
|
|
|
|
mcspi_write_chconf0(spi, l);
|
|
}
|
|
|
|
static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
u32 l;
|
|
|
|
l = cs->chctrl0;
|
|
if (enable)
|
|
l |= OMAP2_MCSPI_CHCTRL_EN;
|
|
else
|
|
l &= ~OMAP2_MCSPI_CHCTRL_EN;
|
|
cs->chctrl0 = l;
|
|
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, cs->chctrl0);
|
|
/* Flash post-writes */
|
|
mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCTRL0);
|
|
}
|
|
|
|
static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
u32 l;
|
|
|
|
/* The controller handles the inverted chip selects
|
|
* using the OMAP2_MCSPI_CHCONF_EPOL bit so revert
|
|
* the inversion from the core spi_set_cs function.
|
|
*/
|
|
if (spi->mode & SPI_CS_HIGH)
|
|
enable = !enable;
|
|
|
|
if (spi->controller_state) {
|
|
int err = pm_runtime_resume_and_get(mcspi->dev);
|
|
if (err < 0) {
|
|
dev_err(mcspi->dev, "failed to get sync: %d\n", err);
|
|
return;
|
|
}
|
|
|
|
l = mcspi_cached_chconf0(spi);
|
|
|
|
/* Only enable chip select manually if single mode is used */
|
|
if (mcspi->use_multi_mode) {
|
|
l &= ~OMAP2_MCSPI_CHCONF_FORCE;
|
|
} else {
|
|
if (enable)
|
|
l &= ~OMAP2_MCSPI_CHCONF_FORCE;
|
|
else
|
|
l |= OMAP2_MCSPI_CHCONF_FORCE;
|
|
}
|
|
|
|
mcspi_write_chconf0(spi, l);
|
|
|
|
pm_runtime_mark_last_busy(mcspi->dev);
|
|
pm_runtime_put_autosuspend(mcspi->dev);
|
|
}
|
|
}
|
|
|
|
static void omap2_mcspi_set_mode(struct spi_controller *ctlr)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
|
u32 l;
|
|
|
|
/*
|
|
* Choose host or target mode
|
|
*/
|
|
l = mcspi_read_reg(ctlr, OMAP2_MCSPI_MODULCTRL);
|
|
l &= ~(OMAP2_MCSPI_MODULCTRL_STEST);
|
|
if (spi_controller_is_target(ctlr)) {
|
|
l |= (OMAP2_MCSPI_MODULCTRL_MS);
|
|
} else {
|
|
l &= ~(OMAP2_MCSPI_MODULCTRL_MS);
|
|
|
|
/* Enable single mode if needed */
|
|
if (mcspi->use_multi_mode)
|
|
l &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
|
|
else
|
|
l |= OMAP2_MCSPI_MODULCTRL_SINGLE;
|
|
}
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_MODULCTRL, l);
|
|
|
|
ctx->modulctrl = l;
|
|
}
|
|
|
|
static void omap2_mcspi_set_fifo(const struct spi_device *spi,
|
|
struct spi_transfer *t, int enable)
|
|
{
|
|
struct spi_controller *ctlr = spi->controller;
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
struct omap2_mcspi *mcspi;
|
|
unsigned int wcnt;
|
|
int max_fifo_depth, bytes_per_word;
|
|
u32 chconf, xferlevel;
|
|
|
|
mcspi = spi_controller_get_devdata(ctlr);
|
|
|
|
chconf = mcspi_cached_chconf0(spi);
|
|
if (enable) {
|
|
bytes_per_word = mcspi_bytes_per_word(cs->word_len);
|
|
if (t->len % bytes_per_word != 0)
|
|
goto disable_fifo;
|
|
|
|
if (t->rx_buf != NULL && t->tx_buf != NULL)
|
|
max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH / 2;
|
|
else
|
|
max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
|
|
|
|
wcnt = t->len / bytes_per_word;
|
|
if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
|
|
goto disable_fifo;
|
|
|
|
xferlevel = wcnt << 16;
|
|
if (t->rx_buf != NULL) {
|
|
chconf |= OMAP2_MCSPI_CHCONF_FFER;
|
|
xferlevel |= (bytes_per_word - 1) << 8;
|
|
}
|
|
|
|
if (t->tx_buf != NULL) {
|
|
chconf |= OMAP2_MCSPI_CHCONF_FFET;
|
|
xferlevel |= bytes_per_word - 1;
|
|
}
|
|
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_XFERLEVEL, xferlevel);
|
|
mcspi_write_chconf0(spi, chconf);
|
|
mcspi->fifo_depth = max_fifo_depth;
|
|
|
|
return;
|
|
}
|
|
|
|
disable_fifo:
|
|
if (t->rx_buf != NULL)
|
|
chconf &= ~OMAP2_MCSPI_CHCONF_FFER;
|
|
|
|
if (t->tx_buf != NULL)
|
|
chconf &= ~OMAP2_MCSPI_CHCONF_FFET;
|
|
|
|
mcspi_write_chconf0(spi, chconf);
|
|
mcspi->fifo_depth = 0;
|
|
}
|
|
|
|
static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
|
|
{
|
|
unsigned long timeout;
|
|
|
|
timeout = jiffies + msecs_to_jiffies(1000);
|
|
while (!(readl_relaxed(reg) & bit)) {
|
|
if (time_after(jiffies, timeout)) {
|
|
if (!(readl_relaxed(reg) & bit))
|
|
return -ETIMEDOUT;
|
|
else
|
|
return 0;
|
|
}
|
|
cpu_relax();
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mcspi_wait_for_completion(struct omap2_mcspi *mcspi,
|
|
struct completion *x)
|
|
{
|
|
if (spi_controller_is_target(mcspi->ctlr)) {
|
|
if (wait_for_completion_interruptible(x) ||
|
|
mcspi->target_aborted)
|
|
return -EINTR;
|
|
} else {
|
|
wait_for_completion(x);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void omap2_mcspi_rx_callback(void *data)
|
|
{
|
|
struct spi_device *spi = data;
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
/* We must disable the DMA RX request */
|
|
omap2_mcspi_set_dma_req(spi, 1, 0);
|
|
|
|
complete(&mcspi_dma->dma_rx_completion);
|
|
}
|
|
|
|
static void omap2_mcspi_tx_callback(void *data)
|
|
{
|
|
struct spi_device *spi = data;
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
/* We must disable the DMA TX request */
|
|
omap2_mcspi_set_dma_req(spi, 0, 0);
|
|
|
|
complete(&mcspi_dma->dma_tx_completion);
|
|
}
|
|
|
|
static void omap2_mcspi_tx_dma(struct spi_device *spi,
|
|
struct spi_transfer *xfer,
|
|
struct dma_slave_config cfg)
|
|
{
|
|
struct omap2_mcspi *mcspi;
|
|
struct omap2_mcspi_dma *mcspi_dma;
|
|
struct dma_async_tx_descriptor *tx;
|
|
|
|
mcspi = spi_controller_get_devdata(spi->controller);
|
|
mcspi_dma = &mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
dmaengine_slave_config(mcspi_dma->dma_tx, &cfg);
|
|
|
|
tx = dmaengine_prep_slave_sg(mcspi_dma->dma_tx, xfer->tx_sg.sgl,
|
|
xfer->tx_sg.nents,
|
|
DMA_MEM_TO_DEV,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (tx) {
|
|
tx->callback = omap2_mcspi_tx_callback;
|
|
tx->callback_param = spi;
|
|
dmaengine_submit(tx);
|
|
} else {
|
|
/* FIXME: fall back to PIO? */
|
|
}
|
|
dma_async_issue_pending(mcspi_dma->dma_tx);
|
|
omap2_mcspi_set_dma_req(spi, 0, 1);
|
|
}
|
|
|
|
static unsigned
|
|
omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
|
|
struct dma_slave_config cfg,
|
|
unsigned es)
|
|
{
|
|
struct omap2_mcspi *mcspi;
|
|
struct omap2_mcspi_dma *mcspi_dma;
|
|
unsigned int count, transfer_reduction = 0;
|
|
struct scatterlist *sg_out[2];
|
|
int nb_sizes = 0, out_mapped_nents[2], ret, x;
|
|
size_t sizes[2];
|
|
u32 l;
|
|
int elements = 0;
|
|
int word_len, element_count;
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
void __iomem *chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
|
|
struct dma_async_tx_descriptor *tx;
|
|
|
|
mcspi = spi_controller_get_devdata(spi->controller);
|
|
mcspi_dma = &mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
count = xfer->len;
|
|
|
|
/*
|
|
* In the "End-of-Transfer Procedure" section for DMA RX in OMAP35x TRM
|
|
* it mentions reducing DMA transfer length by one element in host
|
|
* normal mode.
|
|
*/
|
|
if (mcspi->fifo_depth == 0)
|
|
transfer_reduction = es;
|
|
|
|
word_len = cs->word_len;
|
|
l = mcspi_cached_chconf0(spi);
|
|
|
|
if (word_len <= 8)
|
|
element_count = count;
|
|
else if (word_len <= 16)
|
|
element_count = count >> 1;
|
|
else /* word_len <= 32 */
|
|
element_count = count >> 2;
|
|
|
|
|
|
dmaengine_slave_config(mcspi_dma->dma_rx, &cfg);
|
|
|
|
/*
|
|
* Reduce DMA transfer length by one more if McSPI is
|
|
* configured in turbo mode.
|
|
*/
|
|
if ((l & OMAP2_MCSPI_CHCONF_TURBO) && mcspi->fifo_depth == 0)
|
|
transfer_reduction += es;
|
|
|
|
if (transfer_reduction) {
|
|
/* Split sgl into two. The second sgl won't be used. */
|
|
sizes[0] = count - transfer_reduction;
|
|
sizes[1] = transfer_reduction;
|
|
nb_sizes = 2;
|
|
} else {
|
|
/*
|
|
* Don't bother splitting the sgl. This essentially
|
|
* clones the original sgl.
|
|
*/
|
|
sizes[0] = count;
|
|
nb_sizes = 1;
|
|
}
|
|
|
|
ret = sg_split(xfer->rx_sg.sgl, xfer->rx_sg.nents, 0, nb_sizes,
|
|
sizes, sg_out, out_mapped_nents, GFP_KERNEL);
|
|
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "sg_split failed\n");
|
|
return 0;
|
|
}
|
|
|
|
tx = dmaengine_prep_slave_sg(mcspi_dma->dma_rx, sg_out[0],
|
|
out_mapped_nents[0], DMA_DEV_TO_MEM,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (tx) {
|
|
tx->callback = omap2_mcspi_rx_callback;
|
|
tx->callback_param = spi;
|
|
dmaengine_submit(tx);
|
|
} else {
|
|
/* FIXME: fall back to PIO? */
|
|
}
|
|
|
|
dma_async_issue_pending(mcspi_dma->dma_rx);
|
|
omap2_mcspi_set_dma_req(spi, 1, 1);
|
|
|
|
ret = mcspi_wait_for_completion(mcspi, &mcspi_dma->dma_rx_completion);
|
|
if (ret || mcspi->target_aborted) {
|
|
dmaengine_terminate_sync(mcspi_dma->dma_rx);
|
|
omap2_mcspi_set_dma_req(spi, 1, 0);
|
|
return 0;
|
|
}
|
|
|
|
for (x = 0; x < nb_sizes; x++)
|
|
kfree(sg_out[x]);
|
|
|
|
if (mcspi->fifo_depth > 0)
|
|
return count;
|
|
|
|
/*
|
|
* Due to the DMA transfer length reduction the missing bytes must
|
|
* be read manually to receive all of the expected data.
|
|
*/
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
|
|
elements = element_count - 1;
|
|
|
|
if (l & OMAP2_MCSPI_CHCONF_TURBO) {
|
|
elements--;
|
|
|
|
if (!mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS)) {
|
|
u32 w;
|
|
|
|
w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
|
|
if (word_len <= 8)
|
|
((u8 *)xfer->rx_buf)[elements++] = w;
|
|
else if (word_len <= 16)
|
|
((u16 *)xfer->rx_buf)[elements++] = w;
|
|
else /* word_len <= 32 */
|
|
((u32 *)xfer->rx_buf)[elements++] = w;
|
|
} else {
|
|
int bytes_per_word = mcspi_bytes_per_word(word_len);
|
|
dev_err(&spi->dev, "DMA RX penultimate word empty\n");
|
|
count -= (bytes_per_word << 1);
|
|
omap2_mcspi_set_enable(spi, 1);
|
|
return count;
|
|
}
|
|
}
|
|
if (!mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS)) {
|
|
u32 w;
|
|
|
|
w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
|
|
if (word_len <= 8)
|
|
((u8 *)xfer->rx_buf)[elements] = w;
|
|
else if (word_len <= 16)
|
|
((u16 *)xfer->rx_buf)[elements] = w;
|
|
else /* word_len <= 32 */
|
|
((u32 *)xfer->rx_buf)[elements] = w;
|
|
} else {
|
|
dev_err(&spi->dev, "DMA RX last word empty\n");
|
|
count -= mcspi_bytes_per_word(word_len);
|
|
}
|
|
omap2_mcspi_set_enable(spi, 1);
|
|
return count;
|
|
}
|
|
|
|
static unsigned
|
|
omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
|
|
{
|
|
struct omap2_mcspi *mcspi;
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
struct omap2_mcspi_dma *mcspi_dma;
|
|
unsigned int count;
|
|
u8 *rx;
|
|
const u8 *tx;
|
|
struct dma_slave_config cfg;
|
|
enum dma_slave_buswidth width;
|
|
unsigned es;
|
|
void __iomem *chstat_reg;
|
|
void __iomem *irqstat_reg;
|
|
int wait_res;
|
|
|
|
mcspi = spi_controller_get_devdata(spi->controller);
|
|
mcspi_dma = &mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
if (cs->word_len <= 8) {
|
|
width = DMA_SLAVE_BUSWIDTH_1_BYTE;
|
|
es = 1;
|
|
} else if (cs->word_len <= 16) {
|
|
width = DMA_SLAVE_BUSWIDTH_2_BYTES;
|
|
es = 2;
|
|
} else {
|
|
width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
es = 4;
|
|
}
|
|
|
|
count = xfer->len;
|
|
|
|
memset(&cfg, 0, sizeof(cfg));
|
|
cfg.src_addr = cs->phys + OMAP2_MCSPI_RX0;
|
|
cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
|
|
cfg.src_addr_width = width;
|
|
cfg.dst_addr_width = width;
|
|
cfg.src_maxburst = 1;
|
|
cfg.dst_maxburst = 1;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
|
|
mcspi->target_aborted = false;
|
|
reinit_completion(&mcspi_dma->dma_tx_completion);
|
|
reinit_completion(&mcspi_dma->dma_rx_completion);
|
|
reinit_completion(&mcspi->txdone);
|
|
if (tx) {
|
|
/* Enable EOW IRQ to know end of tx in target mode */
|
|
if (spi_controller_is_target(spi->controller))
|
|
mcspi_write_reg(spi->controller,
|
|
OMAP2_MCSPI_IRQENABLE,
|
|
OMAP2_MCSPI_IRQSTATUS_EOW);
|
|
omap2_mcspi_tx_dma(spi, xfer, cfg);
|
|
}
|
|
|
|
if (rx != NULL)
|
|
count = omap2_mcspi_rx_dma(spi, xfer, cfg, es);
|
|
|
|
if (tx != NULL) {
|
|
int ret;
|
|
|
|
ret = mcspi_wait_for_completion(mcspi, &mcspi_dma->dma_tx_completion);
|
|
if (ret || mcspi->target_aborted) {
|
|
dmaengine_terminate_sync(mcspi_dma->dma_tx);
|
|
omap2_mcspi_set_dma_req(spi, 0, 0);
|
|
return 0;
|
|
}
|
|
|
|
if (spi_controller_is_target(mcspi->ctlr)) {
|
|
ret = mcspi_wait_for_completion(mcspi, &mcspi->txdone);
|
|
if (ret || mcspi->target_aborted)
|
|
return 0;
|
|
}
|
|
|
|
if (mcspi->fifo_depth > 0) {
|
|
irqstat_reg = mcspi->base + OMAP2_MCSPI_IRQSTATUS;
|
|
|
|
if (mcspi_wait_for_reg_bit(irqstat_reg,
|
|
OMAP2_MCSPI_IRQSTATUS_EOW) < 0)
|
|
dev_err(&spi->dev, "EOW timed out\n");
|
|
|
|
mcspi_write_reg(mcspi->ctlr, OMAP2_MCSPI_IRQSTATUS,
|
|
OMAP2_MCSPI_IRQSTATUS_EOW);
|
|
}
|
|
|
|
/* for TX_ONLY mode, be sure all words have shifted out */
|
|
if (rx == NULL) {
|
|
chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
|
|
if (mcspi->fifo_depth > 0) {
|
|
wait_res = mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXFFE);
|
|
if (wait_res < 0)
|
|
dev_err(&spi->dev, "TXFFE timed out\n");
|
|
} else {
|
|
wait_res = mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXS);
|
|
if (wait_res < 0)
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
}
|
|
if (wait_res >= 0 &&
|
|
(mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_EOT) < 0))
|
|
dev_err(&spi->dev, "EOT timed out\n");
|
|
}
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static unsigned
|
|
omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
unsigned int count, c;
|
|
u32 l;
|
|
void __iomem *base = cs->base;
|
|
void __iomem *tx_reg;
|
|
void __iomem *rx_reg;
|
|
void __iomem *chstat_reg;
|
|
int word_len;
|
|
|
|
count = xfer->len;
|
|
c = count;
|
|
word_len = cs->word_len;
|
|
|
|
l = mcspi_cached_chconf0(spi);
|
|
|
|
/* We store the pre-calculated register addresses on stack to speed
|
|
* up the transfer loop. */
|
|
tx_reg = base + OMAP2_MCSPI_TX0;
|
|
rx_reg = base + OMAP2_MCSPI_RX0;
|
|
chstat_reg = base + OMAP2_MCSPI_CHSTAT0;
|
|
|
|
if (c < (word_len>>3))
|
|
return 0;
|
|
|
|
if (word_len <= 8) {
|
|
u8 *rx;
|
|
const u8 *tx;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
|
|
do {
|
|
c -= 1;
|
|
if (tx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
goto out;
|
|
}
|
|
dev_vdbg(&spi->dev, "write-%d %02x\n",
|
|
word_len, *tx);
|
|
writel_relaxed(*tx++, tx_reg);
|
|
}
|
|
if (rx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev, "RXS timed out\n");
|
|
goto out;
|
|
}
|
|
|
|
if (c == 1 && tx == NULL &&
|
|
(l & OMAP2_MCSPI_CHCONF_TURBO)) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %02x\n",
|
|
word_len, *(rx - 1));
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev,
|
|
"RXS timed out\n");
|
|
goto out;
|
|
}
|
|
c = 0;
|
|
} else if (c == 0 && tx == NULL) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
}
|
|
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %02x\n",
|
|
word_len, *(rx - 1));
|
|
}
|
|
/* Add word delay between each word */
|
|
spi_delay_exec(&xfer->word_delay, xfer);
|
|
} while (c);
|
|
} else if (word_len <= 16) {
|
|
u16 *rx;
|
|
const u16 *tx;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
do {
|
|
c -= 2;
|
|
if (tx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
goto out;
|
|
}
|
|
dev_vdbg(&spi->dev, "write-%d %04x\n",
|
|
word_len, *tx);
|
|
writel_relaxed(*tx++, tx_reg);
|
|
}
|
|
if (rx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev, "RXS timed out\n");
|
|
goto out;
|
|
}
|
|
|
|
if (c == 2 && tx == NULL &&
|
|
(l & OMAP2_MCSPI_CHCONF_TURBO)) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %04x\n",
|
|
word_len, *(rx - 1));
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev,
|
|
"RXS timed out\n");
|
|
goto out;
|
|
}
|
|
c = 0;
|
|
} else if (c == 0 && tx == NULL) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
}
|
|
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %04x\n",
|
|
word_len, *(rx - 1));
|
|
}
|
|
/* Add word delay between each word */
|
|
spi_delay_exec(&xfer->word_delay, xfer);
|
|
} while (c >= 2);
|
|
} else if (word_len <= 32) {
|
|
u32 *rx;
|
|
const u32 *tx;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
do {
|
|
c -= 4;
|
|
if (tx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
goto out;
|
|
}
|
|
dev_vdbg(&spi->dev, "write-%d %08x\n",
|
|
word_len, *tx);
|
|
writel_relaxed(*tx++, tx_reg);
|
|
}
|
|
if (rx != NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev, "RXS timed out\n");
|
|
goto out;
|
|
}
|
|
|
|
if (c == 4 && tx == NULL &&
|
|
(l & OMAP2_MCSPI_CHCONF_TURBO)) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %08x\n",
|
|
word_len, *(rx - 1));
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
|
dev_err(&spi->dev,
|
|
"RXS timed out\n");
|
|
goto out;
|
|
}
|
|
c = 0;
|
|
} else if (c == 0 && tx == NULL) {
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
}
|
|
|
|
*rx++ = readl_relaxed(rx_reg);
|
|
dev_vdbg(&spi->dev, "read-%d %08x\n",
|
|
word_len, *(rx - 1));
|
|
}
|
|
/* Add word delay between each word */
|
|
spi_delay_exec(&xfer->word_delay, xfer);
|
|
} while (c >= 4);
|
|
}
|
|
|
|
/* for TX_ONLY mode, be sure all words have shifted out */
|
|
if (xfer->rx_buf == NULL) {
|
|
if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
} else if (mcspi_wait_for_reg_bit(chstat_reg,
|
|
OMAP2_MCSPI_CHSTAT_EOT) < 0)
|
|
dev_err(&spi->dev, "EOT timed out\n");
|
|
|
|
/* disable chan to purge rx datas received in TX_ONLY transfer,
|
|
* otherwise these rx datas will affect the direct following
|
|
* RX_ONLY transfer.
|
|
*/
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
}
|
|
out:
|
|
omap2_mcspi_set_enable(spi, 1);
|
|
return count - c;
|
|
}
|
|
|
|
static u32 omap2_mcspi_calc_divisor(u32 speed_hz, u32 ref_clk_hz)
|
|
{
|
|
u32 div;
|
|
|
|
for (div = 0; div < 15; div++)
|
|
if (speed_hz >= (ref_clk_hz >> div))
|
|
return div;
|
|
|
|
return 15;
|
|
}
|
|
|
|
/* called only when no transfer is active to this device */
|
|
static int omap2_mcspi_setup_transfer(struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
struct omap2_mcspi *mcspi;
|
|
u32 ref_clk_hz, l = 0, clkd = 0, div, extclk = 0, clkg = 0;
|
|
u8 word_len = spi->bits_per_word;
|
|
u32 speed_hz = spi->max_speed_hz;
|
|
|
|
mcspi = spi_controller_get_devdata(spi->controller);
|
|
|
|
if (t != NULL && t->bits_per_word)
|
|
word_len = t->bits_per_word;
|
|
|
|
cs->word_len = word_len;
|
|
|
|
if (t && t->speed_hz)
|
|
speed_hz = t->speed_hz;
|
|
|
|
ref_clk_hz = mcspi->ref_clk_hz;
|
|
speed_hz = min_t(u32, speed_hz, ref_clk_hz);
|
|
if (speed_hz < (ref_clk_hz / OMAP2_MCSPI_MAX_DIVIDER)) {
|
|
clkd = omap2_mcspi_calc_divisor(speed_hz, ref_clk_hz);
|
|
speed_hz = ref_clk_hz >> clkd;
|
|
clkg = 0;
|
|
} else {
|
|
div = (ref_clk_hz + speed_hz - 1) / speed_hz;
|
|
speed_hz = ref_clk_hz / div;
|
|
clkd = (div - 1) & 0xf;
|
|
extclk = (div - 1) >> 4;
|
|
clkg = OMAP2_MCSPI_CHCONF_CLKG;
|
|
}
|
|
|
|
l = mcspi_cached_chconf0(spi);
|
|
|
|
/* standard 4-wire host mode: SCK, MOSI/out, MISO/in, nCS
|
|
* REVISIT: this controller could support SPI_3WIRE mode.
|
|
*/
|
|
if (mcspi->pin_dir == MCSPI_PINDIR_D0_IN_D1_OUT) {
|
|
l &= ~OMAP2_MCSPI_CHCONF_IS;
|
|
l &= ~OMAP2_MCSPI_CHCONF_DPE1;
|
|
l |= OMAP2_MCSPI_CHCONF_DPE0;
|
|
} else {
|
|
l |= OMAP2_MCSPI_CHCONF_IS;
|
|
l |= OMAP2_MCSPI_CHCONF_DPE1;
|
|
l &= ~OMAP2_MCSPI_CHCONF_DPE0;
|
|
}
|
|
|
|
/* wordlength */
|
|
l &= ~OMAP2_MCSPI_CHCONF_WL_MASK;
|
|
l |= (word_len - 1) << 7;
|
|
|
|
/* set chipselect polarity; manage with FORCE */
|
|
if (!(spi->mode & SPI_CS_HIGH))
|
|
l |= OMAP2_MCSPI_CHCONF_EPOL; /* active-low; normal */
|
|
else
|
|
l &= ~OMAP2_MCSPI_CHCONF_EPOL;
|
|
|
|
/* set clock divisor */
|
|
l &= ~OMAP2_MCSPI_CHCONF_CLKD_MASK;
|
|
l |= clkd << 2;
|
|
|
|
/* set clock granularity */
|
|
l &= ~OMAP2_MCSPI_CHCONF_CLKG;
|
|
l |= clkg;
|
|
if (clkg) {
|
|
cs->chctrl0 &= ~OMAP2_MCSPI_CHCTRL_EXTCLK_MASK;
|
|
cs->chctrl0 |= extclk << 8;
|
|
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, cs->chctrl0);
|
|
}
|
|
|
|
/* set SPI mode 0..3 */
|
|
if (spi->mode & SPI_CPOL)
|
|
l |= OMAP2_MCSPI_CHCONF_POL;
|
|
else
|
|
l &= ~OMAP2_MCSPI_CHCONF_POL;
|
|
if (spi->mode & SPI_CPHA)
|
|
l |= OMAP2_MCSPI_CHCONF_PHA;
|
|
else
|
|
l &= ~OMAP2_MCSPI_CHCONF_PHA;
|
|
|
|
mcspi_write_chconf0(spi, l);
|
|
|
|
cs->mode = spi->mode;
|
|
|
|
dev_dbg(&spi->dev, "setup: speed %d, sample %s edge, clk %s\n",
|
|
speed_hz,
|
|
(spi->mode & SPI_CPHA) ? "trailing" : "leading",
|
|
(spi->mode & SPI_CPOL) ? "inverted" : "normal");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Note that we currently allow DMA only if we get a channel
|
|
* for both rx and tx. Otherwise we'll do PIO for both rx and tx.
|
|
*/
|
|
static int omap2_mcspi_request_dma(struct omap2_mcspi *mcspi,
|
|
struct omap2_mcspi_dma *mcspi_dma)
|
|
{
|
|
int ret = 0;
|
|
|
|
mcspi_dma->dma_rx = dma_request_chan(mcspi->dev,
|
|
mcspi_dma->dma_rx_ch_name);
|
|
if (IS_ERR(mcspi_dma->dma_rx)) {
|
|
ret = PTR_ERR(mcspi_dma->dma_rx);
|
|
mcspi_dma->dma_rx = NULL;
|
|
goto no_dma;
|
|
}
|
|
|
|
mcspi_dma->dma_tx = dma_request_chan(mcspi->dev,
|
|
mcspi_dma->dma_tx_ch_name);
|
|
if (IS_ERR(mcspi_dma->dma_tx)) {
|
|
ret = PTR_ERR(mcspi_dma->dma_tx);
|
|
mcspi_dma->dma_tx = NULL;
|
|
dma_release_channel(mcspi_dma->dma_rx);
|
|
mcspi_dma->dma_rx = NULL;
|
|
}
|
|
|
|
init_completion(&mcspi_dma->dma_rx_completion);
|
|
init_completion(&mcspi_dma->dma_tx_completion);
|
|
|
|
no_dma:
|
|
return ret;
|
|
}
|
|
|
|
static void omap2_mcspi_release_dma(struct spi_controller *ctlr)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
struct omap2_mcspi_dma *mcspi_dma;
|
|
int i;
|
|
|
|
for (i = 0; i < ctlr->num_chipselect; i++) {
|
|
mcspi_dma = &mcspi->dma_channels[i];
|
|
|
|
if (mcspi_dma->dma_rx) {
|
|
dma_release_channel(mcspi_dma->dma_rx);
|
|
mcspi_dma->dma_rx = NULL;
|
|
}
|
|
if (mcspi_dma->dma_tx) {
|
|
dma_release_channel(mcspi_dma->dma_tx);
|
|
mcspi_dma->dma_tx = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void omap2_mcspi_cleanup(struct spi_device *spi)
|
|
{
|
|
struct omap2_mcspi_cs *cs;
|
|
|
|
if (spi->controller_state) {
|
|
/* Unlink controller state from context save list */
|
|
cs = spi->controller_state;
|
|
list_del(&cs->node);
|
|
|
|
kfree(cs);
|
|
}
|
|
}
|
|
|
|
static int omap2_mcspi_setup(struct spi_device *spi)
|
|
{
|
|
bool initial_setup = false;
|
|
int ret;
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
|
struct omap2_mcspi_cs *cs = spi->controller_state;
|
|
|
|
if (!cs) {
|
|
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
|
|
if (!cs)
|
|
return -ENOMEM;
|
|
cs->base = mcspi->base + spi_get_chipselect(spi, 0) * 0x14;
|
|
cs->phys = mcspi->phys + spi_get_chipselect(spi, 0) * 0x14;
|
|
cs->mode = 0;
|
|
cs->chconf0 = 0;
|
|
cs->chctrl0 = 0;
|
|
spi->controller_state = cs;
|
|
/* Link this to context save list */
|
|
list_add_tail(&cs->node, &ctx->cs);
|
|
initial_setup = true;
|
|
}
|
|
|
|
ret = pm_runtime_resume_and_get(mcspi->dev);
|
|
if (ret < 0) {
|
|
if (initial_setup)
|
|
omap2_mcspi_cleanup(spi);
|
|
|
|
return ret;
|
|
}
|
|
|
|
ret = omap2_mcspi_setup_transfer(spi, NULL);
|
|
if (ret && initial_setup)
|
|
omap2_mcspi_cleanup(spi);
|
|
|
|
pm_runtime_mark_last_busy(mcspi->dev);
|
|
pm_runtime_put_autosuspend(mcspi->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t omap2_mcspi_irq_handler(int irq, void *data)
|
|
{
|
|
struct omap2_mcspi *mcspi = data;
|
|
u32 irqstat;
|
|
|
|
irqstat = mcspi_read_reg(mcspi->ctlr, OMAP2_MCSPI_IRQSTATUS);
|
|
if (!irqstat)
|
|
return IRQ_NONE;
|
|
|
|
/* Disable IRQ and wakeup target xfer task */
|
|
mcspi_write_reg(mcspi->ctlr, OMAP2_MCSPI_IRQENABLE, 0);
|
|
if (irqstat & OMAP2_MCSPI_IRQSTATUS_EOW)
|
|
complete(&mcspi->txdone);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int omap2_mcspi_target_abort(struct spi_controller *ctlr)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
struct omap2_mcspi_dma *mcspi_dma = mcspi->dma_channels;
|
|
|
|
mcspi->target_aborted = true;
|
|
complete(&mcspi_dma->dma_rx_completion);
|
|
complete(&mcspi_dma->dma_tx_completion);
|
|
complete(&mcspi->txdone);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
|
|
/* We only enable one channel at a time -- the one whose message is
|
|
* -- although this controller would gladly
|
|
* arbitrate among multiple channels. This corresponds to "single
|
|
* channel" host mode. As a side effect, we need to manage the
|
|
* chipselect with the FORCE bit ... CS != channel enable.
|
|
*/
|
|
|
|
struct omap2_mcspi *mcspi;
|
|
struct omap2_mcspi_dma *mcspi_dma;
|
|
struct omap2_mcspi_cs *cs;
|
|
struct omap2_mcspi_device_config *cd;
|
|
int par_override = 0;
|
|
int status = 0;
|
|
u32 chconf;
|
|
|
|
mcspi = spi_controller_get_devdata(ctlr);
|
|
mcspi_dma = mcspi->dma_channels + spi_get_chipselect(spi, 0);
|
|
cs = spi->controller_state;
|
|
cd = spi->controller_data;
|
|
|
|
/*
|
|
* The target driver could have changed spi->mode in which case
|
|
* it will be different from cs->mode (the current hardware setup).
|
|
* If so, set par_override (even though its not a parity issue) so
|
|
* omap2_mcspi_setup_transfer will be called to configure the hardware
|
|
* with the correct mode on the first iteration of the loop below.
|
|
*/
|
|
if (spi->mode != cs->mode)
|
|
par_override = 1;
|
|
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
|
|
if (spi_get_csgpiod(spi, 0))
|
|
omap2_mcspi_set_cs(spi, spi->mode & SPI_CS_HIGH);
|
|
|
|
if (par_override ||
|
|
(t->speed_hz != spi->max_speed_hz) ||
|
|
(t->bits_per_word != spi->bits_per_word)) {
|
|
par_override = 1;
|
|
status = omap2_mcspi_setup_transfer(spi, t);
|
|
if (status < 0)
|
|
goto out;
|
|
if (t->speed_hz == spi->max_speed_hz &&
|
|
t->bits_per_word == spi->bits_per_word)
|
|
par_override = 0;
|
|
}
|
|
|
|
chconf = mcspi_cached_chconf0(spi);
|
|
chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK;
|
|
chconf &= ~OMAP2_MCSPI_CHCONF_TURBO;
|
|
|
|
if (t->tx_buf == NULL)
|
|
chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY;
|
|
else if (t->rx_buf == NULL)
|
|
chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY;
|
|
|
|
if (cd && cd->turbo_mode && t->tx_buf == NULL) {
|
|
/* Turbo mode is for more than one word */
|
|
if (t->len > ((cs->word_len + 7) >> 3))
|
|
chconf |= OMAP2_MCSPI_CHCONF_TURBO;
|
|
}
|
|
|
|
mcspi_write_chconf0(spi, chconf);
|
|
|
|
if (t->len) {
|
|
unsigned count;
|
|
|
|
if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
|
|
spi_xfer_is_dma_mapped(ctlr, spi, t))
|
|
omap2_mcspi_set_fifo(spi, t, 1);
|
|
|
|
omap2_mcspi_set_enable(spi, 1);
|
|
|
|
/* RX_ONLY mode needs dummy data in TX reg */
|
|
if (t->tx_buf == NULL)
|
|
writel_relaxed(0, cs->base
|
|
+ OMAP2_MCSPI_TX0);
|
|
|
|
if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
|
|
spi_xfer_is_dma_mapped(ctlr, spi, t))
|
|
count = omap2_mcspi_txrx_dma(spi, t);
|
|
else
|
|
count = omap2_mcspi_txrx_pio(spi, t);
|
|
|
|
if (count != t->len) {
|
|
status = -EIO;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
|
|
if (mcspi->fifo_depth > 0)
|
|
omap2_mcspi_set_fifo(spi, t, 0);
|
|
|
|
out:
|
|
/* Restore defaults if they were overriden */
|
|
if (par_override) {
|
|
par_override = 0;
|
|
status = omap2_mcspi_setup_transfer(spi, NULL);
|
|
}
|
|
|
|
omap2_mcspi_set_enable(spi, 0);
|
|
|
|
if (spi_get_csgpiod(spi, 0))
|
|
omap2_mcspi_set_cs(spi, !(spi->mode & SPI_CS_HIGH));
|
|
|
|
if (mcspi->fifo_depth > 0 && t)
|
|
omap2_mcspi_set_fifo(spi, t, 0);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int omap2_mcspi_prepare_message(struct spi_controller *ctlr,
|
|
struct spi_message *msg)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
|
struct omap2_mcspi_cs *cs;
|
|
struct spi_transfer *tr;
|
|
u8 bits_per_word;
|
|
|
|
/*
|
|
* The conditions are strict, it is mandatory to check each transfer of the list to see if
|
|
* multi-mode is applicable.
|
|
*/
|
|
mcspi->use_multi_mode = true;
|
|
list_for_each_entry(tr, &msg->transfers, transfer_list) {
|
|
if (!tr->bits_per_word)
|
|
bits_per_word = msg->spi->bits_per_word;
|
|
else
|
|
bits_per_word = tr->bits_per_word;
|
|
|
|
/*
|
|
* Check if this transfer contains only one word;
|
|
* OR contains 1 to 4 words, with bits_per_word == 8 and no delay between each word
|
|
* OR contains 1 to 2 words, with bits_per_word == 16 and no delay between each word
|
|
*
|
|
* If one of the two last case is true, this also change the bits_per_word of this
|
|
* transfer to make it a bit faster.
|
|
* It's not an issue to change the bits_per_word here even if the multi-mode is not
|
|
* applicable for this message, the signal on the wire will be the same.
|
|
*/
|
|
if (bits_per_word < 8 && tr->len == 1) {
|
|
/* multi-mode is applicable, only one word (1..7 bits) */
|
|
} else if (tr->word_delay.value == 0 && bits_per_word == 8 && tr->len <= 4) {
|
|
/* multi-mode is applicable, only one "bigger" word (8,16,24,32 bits) */
|
|
tr->bits_per_word = tr->len * bits_per_word;
|
|
} else if (tr->word_delay.value == 0 && bits_per_word == 16 && tr->len <= 2) {
|
|
/* multi-mode is applicable, only one "bigger" word (16,32 bits) */
|
|
tr->bits_per_word = tr->len * bits_per_word / 2;
|
|
} else if (bits_per_word >= 8 && tr->len == bits_per_word / 8) {
|
|
/* multi-mode is applicable, only one word (9..15,17..32 bits) */
|
|
} else {
|
|
/* multi-mode is not applicable: more than one word in the transfer */
|
|
mcspi->use_multi_mode = false;
|
|
}
|
|
|
|
/* Check if transfer asks to change the CS status after the transfer */
|
|
if (!tr->cs_change)
|
|
mcspi->use_multi_mode = false;
|
|
|
|
/*
|
|
* If at least one message is not compatible, switch back to single mode
|
|
*
|
|
* The bits_per_word of certain transfer can be different, but it will have no
|
|
* impact on the signal itself.
|
|
*/
|
|
if (!mcspi->use_multi_mode)
|
|
break;
|
|
}
|
|
|
|
omap2_mcspi_set_mode(ctlr);
|
|
|
|
/* In single mode only a single channel can have the FORCE bit enabled
|
|
* in its chconf0 register.
|
|
* Scan all channels and disable them except the current one.
|
|
* A FORCE can remain from a last transfer having cs_change enabled
|
|
*
|
|
* In multi mode all FORCE bits must be disabled.
|
|
*/
|
|
list_for_each_entry(cs, &ctx->cs, node) {
|
|
if (msg->spi->controller_state == cs && !mcspi->use_multi_mode) {
|
|
continue;
|
|
}
|
|
|
|
if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE)) {
|
|
cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
|
|
writel_relaxed(cs->chconf0,
|
|
cs->base + OMAP2_MCSPI_CHCONF0);
|
|
readl_relaxed(cs->base + OMAP2_MCSPI_CHCONF0);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool omap2_mcspi_can_dma(struct spi_controller *ctlr,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
struct omap2_mcspi_dma *mcspi_dma =
|
|
&mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
if (!mcspi_dma->dma_rx || !mcspi_dma->dma_tx)
|
|
return false;
|
|
|
|
if (spi_controller_is_target(ctlr))
|
|
return true;
|
|
|
|
ctlr->dma_rx = mcspi_dma->dma_rx;
|
|
ctlr->dma_tx = mcspi_dma->dma_tx;
|
|
|
|
return (xfer->len >= DMA_MIN_BYTES);
|
|
}
|
|
|
|
static size_t omap2_mcspi_max_xfer_size(struct spi_device *spi)
|
|
{
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(spi->controller);
|
|
struct omap2_mcspi_dma *mcspi_dma =
|
|
&mcspi->dma_channels[spi_get_chipselect(spi, 0)];
|
|
|
|
if (mcspi->max_xfer_len && mcspi_dma->dma_rx)
|
|
return mcspi->max_xfer_len;
|
|
|
|
return SIZE_MAX;
|
|
}
|
|
|
|
static int omap2_mcspi_controller_setup(struct omap2_mcspi *mcspi)
|
|
{
|
|
struct spi_controller *ctlr = mcspi->ctlr;
|
|
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
|
int ret = 0;
|
|
|
|
ret = pm_runtime_resume_and_get(mcspi->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_WAKEUPENABLE,
|
|
OMAP2_MCSPI_WAKEUPENABLE_WKEN);
|
|
ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
|
|
|
|
omap2_mcspi_set_mode(ctlr);
|
|
pm_runtime_mark_last_busy(mcspi->dev);
|
|
pm_runtime_put_autosuspend(mcspi->dev);
|
|
return 0;
|
|
}
|
|
|
|
static int omap_mcspi_runtime_suspend(struct device *dev)
|
|
{
|
|
int error;
|
|
|
|
error = pinctrl_pm_select_idle_state(dev);
|
|
if (error)
|
|
dev_warn(dev, "%s: failed to set pins: %i\n", __func__, error);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* When SPI wake up from off-mode, CS is in activate state. If it was in
|
|
* inactive state when driver was suspend, then force it to inactive state at
|
|
* wake up.
|
|
*/
|
|
static int omap_mcspi_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_controller *ctlr = dev_get_drvdata(dev);
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
|
struct omap2_mcspi_cs *cs;
|
|
int error;
|
|
|
|
error = pinctrl_pm_select_default_state(dev);
|
|
if (error)
|
|
dev_warn(dev, "%s: failed to set pins: %i\n", __func__, error);
|
|
|
|
/* McSPI: context restore */
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_MODULCTRL, ctx->modulctrl);
|
|
mcspi_write_reg(ctlr, OMAP2_MCSPI_WAKEUPENABLE, ctx->wakeupenable);
|
|
|
|
list_for_each_entry(cs, &ctx->cs, node) {
|
|
/*
|
|
* We need to toggle CS state for OMAP take this
|
|
* change in account.
|
|
*/
|
|
if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) {
|
|
cs->chconf0 |= OMAP2_MCSPI_CHCONF_FORCE;
|
|
writel_relaxed(cs->chconf0,
|
|
cs->base + OMAP2_MCSPI_CHCONF0);
|
|
cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
|
|
writel_relaxed(cs->chconf0,
|
|
cs->base + OMAP2_MCSPI_CHCONF0);
|
|
} else {
|
|
writel_relaxed(cs->chconf0,
|
|
cs->base + OMAP2_MCSPI_CHCONF0);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct omap2_mcspi_platform_config omap2_pdata = {
|
|
.regs_offset = 0,
|
|
};
|
|
|
|
static struct omap2_mcspi_platform_config omap4_pdata = {
|
|
.regs_offset = OMAP4_MCSPI_REG_OFFSET,
|
|
};
|
|
|
|
static struct omap2_mcspi_platform_config am654_pdata = {
|
|
.regs_offset = OMAP4_MCSPI_REG_OFFSET,
|
|
.max_xfer_len = SZ_4K - 1,
|
|
};
|
|
|
|
static const struct of_device_id omap_mcspi_of_match[] = {
|
|
{
|
|
.compatible = "ti,omap2-mcspi",
|
|
.data = &omap2_pdata,
|
|
},
|
|
{
|
|
.compatible = "ti,omap4-mcspi",
|
|
.data = &omap4_pdata,
|
|
},
|
|
{
|
|
.compatible = "ti,am654-mcspi",
|
|
.data = &am654_pdata,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_mcspi_of_match);
|
|
|
|
static int omap2_mcspi_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *ctlr;
|
|
const struct omap2_mcspi_platform_config *pdata;
|
|
struct omap2_mcspi *mcspi;
|
|
struct resource *r;
|
|
int status = 0, i;
|
|
u32 regs_offset = 0;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
const struct of_device_id *match;
|
|
|
|
if (of_property_read_bool(node, "spi-slave"))
|
|
ctlr = spi_alloc_target(&pdev->dev, sizeof(*mcspi));
|
|
else
|
|
ctlr = spi_alloc_host(&pdev->dev, sizeof(*mcspi));
|
|
if (!ctlr)
|
|
return -ENOMEM;
|
|
|
|
/* the spi->mode bits understood by this driver: */
|
|
ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
|
|
ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
|
|
ctlr->setup = omap2_mcspi_setup;
|
|
ctlr->auto_runtime_pm = true;
|
|
ctlr->prepare_message = omap2_mcspi_prepare_message;
|
|
ctlr->can_dma = omap2_mcspi_can_dma;
|
|
ctlr->transfer_one = omap2_mcspi_transfer_one;
|
|
ctlr->set_cs = omap2_mcspi_set_cs;
|
|
ctlr->cleanup = omap2_mcspi_cleanup;
|
|
ctlr->target_abort = omap2_mcspi_target_abort;
|
|
ctlr->dev.of_node = node;
|
|
ctlr->use_gpio_descriptors = true;
|
|
|
|
platform_set_drvdata(pdev, ctlr);
|
|
|
|
mcspi = spi_controller_get_devdata(ctlr);
|
|
mcspi->ctlr = ctlr;
|
|
|
|
match = of_match_device(omap_mcspi_of_match, &pdev->dev);
|
|
if (match) {
|
|
u32 num_cs = 1; /* default number of chipselect */
|
|
pdata = match->data;
|
|
|
|
of_property_read_u32(node, "ti,spi-num-cs", &num_cs);
|
|
ctlr->num_chipselect = num_cs;
|
|
if (of_property_read_bool(node, "ti,pindir-d0-out-d1-in"))
|
|
mcspi->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
|
|
} else {
|
|
pdata = dev_get_platdata(&pdev->dev);
|
|
ctlr->num_chipselect = pdata->num_cs;
|
|
mcspi->pin_dir = pdata->pin_dir;
|
|
}
|
|
regs_offset = pdata->regs_offset;
|
|
if (pdata->max_xfer_len) {
|
|
mcspi->max_xfer_len = pdata->max_xfer_len;
|
|
ctlr->max_transfer_size = omap2_mcspi_max_xfer_size;
|
|
}
|
|
|
|
mcspi->base = devm_platform_get_and_ioremap_resource(pdev, 0, &r);
|
|
if (IS_ERR(mcspi->base)) {
|
|
status = PTR_ERR(mcspi->base);
|
|
goto free_ctlr;
|
|
}
|
|
mcspi->phys = r->start + regs_offset;
|
|
mcspi->base += regs_offset;
|
|
|
|
mcspi->dev = &pdev->dev;
|
|
|
|
INIT_LIST_HEAD(&mcspi->ctx.cs);
|
|
|
|
mcspi->dma_channels = devm_kcalloc(&pdev->dev, ctlr->num_chipselect,
|
|
sizeof(struct omap2_mcspi_dma),
|
|
GFP_KERNEL);
|
|
if (mcspi->dma_channels == NULL) {
|
|
status = -ENOMEM;
|
|
goto free_ctlr;
|
|
}
|
|
|
|
for (i = 0; i < ctlr->num_chipselect; i++) {
|
|
sprintf(mcspi->dma_channels[i].dma_rx_ch_name, "rx%d", i);
|
|
sprintf(mcspi->dma_channels[i].dma_tx_ch_name, "tx%d", i);
|
|
|
|
status = omap2_mcspi_request_dma(mcspi,
|
|
&mcspi->dma_channels[i]);
|
|
if (status == -EPROBE_DEFER)
|
|
goto free_ctlr;
|
|
}
|
|
|
|
status = platform_get_irq(pdev, 0);
|
|
if (status < 0)
|
|
goto free_ctlr;
|
|
init_completion(&mcspi->txdone);
|
|
status = devm_request_irq(&pdev->dev, status,
|
|
omap2_mcspi_irq_handler, 0, pdev->name,
|
|
mcspi);
|
|
if (status) {
|
|
dev_err(&pdev->dev, "Cannot request IRQ");
|
|
goto free_ctlr;
|
|
}
|
|
|
|
mcspi->ref_clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
|
|
if (mcspi->ref_clk)
|
|
mcspi->ref_clk_hz = clk_get_rate(mcspi->ref_clk);
|
|
else
|
|
mcspi->ref_clk_hz = OMAP2_MCSPI_MAX_FREQ;
|
|
ctlr->max_speed_hz = mcspi->ref_clk_hz;
|
|
ctlr->min_speed_hz = mcspi->ref_clk_hz >> 15;
|
|
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
status = omap2_mcspi_controller_setup(mcspi);
|
|
if (status < 0)
|
|
goto disable_pm;
|
|
|
|
status = devm_spi_register_controller(&pdev->dev, ctlr);
|
|
if (status < 0)
|
|
goto disable_pm;
|
|
|
|
return status;
|
|
|
|
disable_pm:
|
|
pm_runtime_dont_use_autosuspend(&pdev->dev);
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
free_ctlr:
|
|
omap2_mcspi_release_dma(ctlr);
|
|
spi_controller_put(ctlr);
|
|
return status;
|
|
}
|
|
|
|
static void omap2_mcspi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *ctlr = platform_get_drvdata(pdev);
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
|
|
omap2_mcspi_release_dma(ctlr);
|
|
|
|
pm_runtime_dont_use_autosuspend(mcspi->dev);
|
|
pm_runtime_put_sync(mcspi->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
}
|
|
|
|
/* work with hotplug and coldplug */
|
|
MODULE_ALIAS("platform:omap2_mcspi");
|
|
|
|
static int __maybe_unused omap2_mcspi_suspend(struct device *dev)
|
|
{
|
|
struct spi_controller *ctlr = dev_get_drvdata(dev);
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
int error;
|
|
|
|
error = pinctrl_pm_select_sleep_state(dev);
|
|
if (error)
|
|
dev_warn(mcspi->dev, "%s: failed to set pins: %i\n",
|
|
__func__, error);
|
|
|
|
error = spi_controller_suspend(ctlr);
|
|
if (error)
|
|
dev_warn(mcspi->dev, "%s: controller suspend failed: %i\n",
|
|
__func__, error);
|
|
|
|
return pm_runtime_force_suspend(dev);
|
|
}
|
|
|
|
static int __maybe_unused omap2_mcspi_resume(struct device *dev)
|
|
{
|
|
struct spi_controller *ctlr = dev_get_drvdata(dev);
|
|
struct omap2_mcspi *mcspi = spi_controller_get_devdata(ctlr);
|
|
int error;
|
|
|
|
error = spi_controller_resume(ctlr);
|
|
if (error)
|
|
dev_warn(mcspi->dev, "%s: controller resume failed: %i\n",
|
|
__func__, error);
|
|
|
|
return pm_runtime_force_resume(dev);
|
|
}
|
|
|
|
static const struct dev_pm_ops omap2_mcspi_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(omap2_mcspi_suspend,
|
|
omap2_mcspi_resume)
|
|
.runtime_suspend = omap_mcspi_runtime_suspend,
|
|
.runtime_resume = omap_mcspi_runtime_resume,
|
|
};
|
|
|
|
static struct platform_driver omap2_mcspi_driver = {
|
|
.driver = {
|
|
.name = "omap2_mcspi",
|
|
.pm = &omap2_mcspi_pm_ops,
|
|
.of_match_table = omap_mcspi_of_match,
|
|
},
|
|
.probe = omap2_mcspi_probe,
|
|
.remove_new = omap2_mcspi_remove,
|
|
};
|
|
|
|
module_platform_driver(omap2_mcspi_driver);
|
|
MODULE_DESCRIPTION("OMAP2 McSPI controller driver");
|
|
MODULE_LICENSE("GPL");
|