linux/drivers/pci/hotplug
Linus Torvalds 556f12f602 PCI changes for the v3.9 merge window:
Host bridge hotplug
     - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
     - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
     - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
     - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)
 
   PCI device hotplug
     - Clean up cpqphp dead code (Sasha Levin)
     - Disable ARI unless device and upstream bridge support it (Yijing Wang)
     - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)
 
   Power management
     - Don't touch ASPM if disabled (Joe Lawrence)
     - Fix ASPM link state management (Myron Stowe)
 
   Miscellaneous
     - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
     - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
     - Document hotplug resource and MPS parameters (Yijing Wang)
     - Add accessor for PCIe capabilities (Myron Stowe)
     - Drop pciehp suspend/resume messages (Paul Bolle)
     - Make pci_slot built-in only (not a module) (Jiang Liu)
     - Remove unused PCI/ACPI bind ops (Jiang Liu)
     - Removed used pci_root_bus (Bjorn Helgaas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKS3hAAoJEFmIoMA60/r8xxoP/j1CS4oCZAnBIVT9fKBkis+/
 CENcfHIUKj6J9iMfJEVvqBELvqaLqtpeNwAGMcGPxV7VuT3K1QumChfaTpRDP0HC
 VDRmrjcmfenEK+YPOG7acsrTyqk2wjpLOyu9MKRxtC5u7tF6376KQpkEFpO4haL4
 eUHTxfE76OkrPBSvx3+PUSf6jqrvrNbjX8K6HdDVVlm3sVAQKmYJU/Wphv2NPOqa
 CAMyCzEGybFjr8hDRwvWgr+06c718GMwQUbnrPdHXAe7lMNMrN/XVBmU9ABN3Aas
 icd3lrDs+yPObgcO/gT8+sAZErCtdJ9zuHGYHdYpRbIQj/5JT4TMk7tw/Bj7vKY9
 Mqmho9GR5YmYTRN9f1r+2n5AQ/KYWXJDrRNOnt5/ys5BOM3vwJ7WJ902zpSwtFQp
 nLX+oD/hLfzpnoIQGDuBAoAXp2Kam3XWRgVvG78buRNrPj+kUzimk14a8qQeY+CB
 El6UKuwi5Uv/qgs1gAqqjmZmsAkon2DnsRZa6Fl8NTkDlis7LY4gp9OU38ySFpB+
 PhCmRyCZmDDqTVtwj6XzR3nPQ5LBSbvsTfgMxYMIUSXHa06tyb2q5p4mEIas0OmU
 RKaP5xQqZuTgD8fbdYrx0xgSrn7JHt/j/X//Qs6unlLCWhlpm3LjJZKxyw2FwBGr
 o4Lci+PiBh3MowCrju9D
 =ER3b
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
    - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
    - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
    - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)

  PCI device hotplug
    - Clean up cpqphp dead code (Sasha Levin)
    - Disable ARI unless device and upstream bridge support it (Yijing Wang)
    - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)

  Power management
    - Don't touch ASPM if disabled (Joe Lawrence)
    - Fix ASPM link state management (Myron Stowe)

  Miscellaneous
    - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
    - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
    - Document hotplug resource and MPS parameters (Yijing Wang)
    - Add accessor for PCIe capabilities (Myron Stowe)
    - Drop pciehp suspend/resume messages (Paul Bolle)
    - Make pci_slot built-in only (not a module) (Jiang Liu)
    - Remove unused PCI/ACPI bind ops (Jiang Liu)
    - Removed used pci_root_bus (Bjorn Helgaas)"

* tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
  PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
  ACPI / PCI: Make pci_slot built-in only, not a module
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
  PCI: acpiphp: Remove dead code for PCI host bridge hotplug
  PCI: acpiphp: Create companion ACPI devices before creating PCI devices
  PCI: Remove unused "rc" in virtfn_add_bus()
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI/ASPM: Don't touch ASPM if forcibly disabled
  PCI/ASPM: Deallocate upstream link state even if device is not PCIe
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  ...
2013-02-25 21:18:18 -08:00
..
acpi_pcihp.c module_param: make bool parameters really bool (drivers & misc) 2012-01-13 09:32:20 +10:30
acpiphp_core.c PCI: acpiphp: Keep driver loaded even if no slots found 2013-01-25 14:53:48 -07:00
acpiphp_glue.c PCI changes for the v3.9 merge window: 2013-02-25 21:18:18 -08:00
acpiphp_ibm.c module_param: make bool parameters really bool (drivers & misc) 2012-01-13 09:32:20 +10:30
acpiphp.h PCI: acpiphp: Remove dead code for PCI host bridge hotplug 2013-02-02 14:28:02 -07:00
cpci_hotplug_core.c PCI: hotplug: ensure a consistent return value in error case 2012-07-16 09:25:56 -06:00
cpci_hotplug_pci.c PCI: cpcihp: Iterate over all devices in slot, not functions 0-7 2013-01-25 09:23:08 -07:00
cpci_hotplug.h
cpcihp_generic.c PCI/cpcihp: Use hotplug-safe pci_get_domain_bus_and_slot() 2012-09-12 14:13:59 -06:00
cpcihp_zt5550.c PCI: Remove __dev* markings 2012-11-28 13:16:47 -08:00
cpcihp_zt5550.h
cpqphp_core.c PCI: hotplug: ensure a consistent return value in error case 2012-07-16 09:25:56 -06:00
cpqphp_ctrl.c PCI: cpqphp: Cleanup and remove unreachable paths 2013-01-07 11:34:04 -07:00
cpqphp_nvram.c PCI Hotplug: cpqphp: fix comment style 2009-06-11 12:04:08 -07:00
cpqphp_nvram.h
cpqphp_pci.c PCI: cpqhp: use generic pci_hp_add_bridge() 2012-06-13 15:42:26 -06:00
cpqphp_sysfs.c drivers: autoconvert trivial BKL users to private mutex 2010-10-05 15:01:04 +02:00
cpqphp.h PCI: Make current and maximum bus speeds part of the PCI core 2010-02-22 16:15:17 -08:00
ibmphp_core.c PCI changes for the 3.6 merge window: 2012-07-24 16:17:07 -07:00
ibmphp_ebda.c pci: hotplug: Fix typo in pci 2012-07-24 12:59:30 +02:00
ibmphp_hpc.c PCI hotplug: ibmphp-hpc: semaphore cleanup 2010-10-15 13:09:48 -07:00
ibmphp_pci.c pci: hotplug: Fix typo in pci 2012-07-24 12:59:30 +02:00
ibmphp_res.c ibmphp: Rename add_range() to add_bus_range() to avoid conflict 2010-02-10 17:45:09 -08:00
ibmphp.h
Kconfig s390/pci: PCI hotplug support via SCLP 2012-11-30 17:47:25 +01:00
Makefile s390/pci: PCI hotplug support via SCLP 2012-11-30 17:47:25 +01:00
pci_hotplug_core.c module_param: make bool parameters really bool (drivers & misc) 2012-01-13 09:32:20 +10:30
pciehp_acpi.c PCI/pciehp: Use PCI Express Capability accessors 2012-08-23 10:11:11 -06:00
pciehp_core.c PCI changes for the v3.9 merge window: 2013-02-25 21:18:18 -08:00
pciehp_ctrl.c PCI: pciehp: Use per-slot workqueues to avoid deadlock 2013-01-12 13:56:33 -07:00
pciehp_hpc.c PCI: pciehp: Use per-slot workqueues to avoid deadlock 2013-01-12 13:56:33 -07:00
pciehp_pci.c PCI: pciehp: Iterate over all devices in slot, not functions 0-7 2013-01-25 09:21:10 -07:00
pciehp.h PCI: pciehp: Use per-slot workqueues to avoid deadlock 2013-01-12 13:56:33 -07:00
pcihp_skeleton.c PCI: hotplug: ensure a consistent return value in error case 2012-07-16 09:25:56 -06:00
pcihp_slot.c PCI/hotplug: Use PCI Express Capability accessors 2012-08-23 10:11:11 -06:00
rpadlpar_core.c powerpc/eeh: Remove EEH PE for normal PCI hotplug 2012-09-18 15:32:23 +10:00
rpadlpar_sysfs.c
rpadlpar.h
rpaphp_core.c module_param: make bool parameters really bool (drivers & misc) 2012-01-13 09:32:20 +10:30
rpaphp_pci.c
rpaphp_slot.c headers: kobject.h redux 2011-01-10 08:51:44 -08:00
rpaphp.h module_param: make bool parameters really bool (drivers & misc) 2012-01-13 09:32:20 +10:30
s390_pci_hpc.c s390/pci: fix hotplug module init 2013-02-14 15:55:17 +01:00
sgi_hotplug.c PCI changes for the v3.9 merge window: 2013-02-25 21:18:18 -08:00
shpchp_core.c PCI: shpchp: Use per-slot workqueues to avoid deadlock 2013-01-14 10:23:22 -07:00
shpchp_ctrl.c PCI: shpchp: Use per-slot workqueues to avoid deadlock 2013-01-14 10:23:22 -07:00
shpchp_hpc.c PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs 2011-11-14 09:43:14 -08:00
shpchp_pci.c PCI: shpchp: Iterate over all devices in slot, not functions 0-7 2013-01-25 09:23:08 -07:00
shpchp_sysfs.c PCI: replace struct pci_bus secondary/subordinate with busn_res 2012-06-13 15:42:22 -06:00
shpchp.h PCI: shpchp: Use per-slot workqueues to avoid deadlock 2013-01-14 10:23:22 -07:00