Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-17 01:22:07 +00:00
Code Issues Packages Projects Releases Wiki Activity
a88db2ecc2
linux/drivers/usb/host/xhci.h
Jonathan Bell 5255660b20 xhci: add quirk for host controllers that don't update endpoint DCS 
Seen on a VLI VL805 PCIe to USB controller. For non-stream endpoints
at least, if the xHC halts on a particular TRB due to an error then
the DCS field in the Out Endpoint Context maintained by the hardware
is not updated with the current cycle state.

Using the quirk XHCI_EP_CTX_BROKEN_DCS and instead fetch the DCS bit
from the TRB that the xHC stopped on.

[ bjorn: rebased to v5.14-rc2 ]

Link: https://github.com/raspberrypi/linux/issues/3060
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-11 07:42:18 +02:00

2773 lines
87 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* xHCI host controller driver
*
* Copyright (C) 2008 Intel Corp.
*
* Author: Sarah Sharp
* Some code borrowed from the Linux EHCI driver.
*/
#ifndef __LINUX_XHCI_HCD_H
#define __LINUX_XHCI_HCD_H
#include <linux/usb.h>
#include <linux/timer.h>
#include <linux/kernel.h>
#include <linux/usb/hcd.h>
#include <linux/io-64-nonatomic-lo-hi.h>
/* Code sharing between pci-quirks and xhci hcd */
#include "xhci-ext-caps.h"
#include "pci-quirks.h"
/* max buffer size for trace and debug messages */
#define XHCI_MSG_MAX 500
/* xHCI PCI Configuration Registers */
#define XHCI_SBRN_OFFSET (0x60)
/* Max number of USB devices for any host controller - limit in section 6.1 */
#define MAX_HC_SLOTS 256
/* Section 5.3.3 - MaxPorts */
#define MAX_HC_PORTS 127
/*
* xHCI register interface.
* This corresponds to the eXtensible Host Controller Interface (xHCI)
* Revision 0.95 specification
*/
/**
* struct xhci_cap_regs - xHCI Host Controller Capability Registers.
* @hc_capbase: length of the capabilities register and HC version number
* @hcs_params1: HCSPARAMS1 - Structural Parameters 1
* @hcs_params2: HCSPARAMS2 - Structural Parameters 2
* @hcs_params3: HCSPARAMS3 - Structural Parameters 3
* @hcc_params: HCCPARAMS - Capability Parameters
* @db_off: DBOFF - Doorbell array offset
* @run_regs_off: RTSOFF - Runtime register space offset
* @hcc_params2: HCCPARAMS2 Capability Parameters 2, xhci 1.1 only
*/
struct xhci_cap_regs {
__le32 hc_capbase;
__le32 hcs_params1;
__le32 hcs_params2;
__le32 hcs_params3;
__le32 hcc_params;
__le32 db_off;
__le32 run_regs_off;
__le32 hcc_params2; /* xhci 1.1 */
/* Reserved up to (CAPLENGTH - 0x1C) */
};
/* hc_capbase bitmasks */
/* bits 7:0 - how long is the Capabilities register */
#define HC_LENGTH(p) XHCI_HC_LENGTH(p)
/* bits 31:16 */
#define HC_VERSION(p) (((p) >> 16) & 0xffff)
/* HCSPARAMS1 - hcs_params1 - bitmasks */
/* bits 0:7, Max Device Slots */
#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff)
#define HCS_SLOTS_MASK 0xff
/* bits 8:18, Max Interrupters */
#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
/* HCSPARAMS2 - hcs_params2 - bitmasks */
/* bits 0:3, frames or uframes that SW needs to queue transactions
* ahead of the HW to meet periodic deadlines */
#define HCS_IST(p) (((p) >> 0) & 0xf)
/* bits 4:7, max number of Event Ring segments */
#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
#define HCS_MAX_SCRATCHPAD(p) ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
/* HCSPARAMS3 - hcs_params3 - bitmasks */
/* bits 0:7, Max U1 to U0 latency for the roothub ports */
#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff)
/* bits 16:31, Max U2 to U0 latency for the roothub ports */
#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff)
/* HCCPARAMS - hcc_params - bitmasks */
/* true: HC can use 64-bit address pointers */
#define HCC_64BIT_ADDR(p) ((p) & (1 << 0))
/* true: HC can do bandwidth negotiation */
#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1))
/* true: HC uses 64-byte Device Context structures
* FIXME 64-byte context structures aren't supported yet.
*/
#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2))
/* true: HC has port power switches */
#define HCC_PPC(p) ((p) & (1 << 3))
/* true: HC has port indicators */
#define HCS_INDICATOR(p) ((p) & (1 << 4))
/* true: HC has Light HC Reset Capability */
#define HCC_LIGHT_RESET(p) ((p) & (1 << 5))
/* true: HC supports latency tolerance messaging */
#define HCC_LTC(p) ((p) & (1 << 6))
/* true: no secondary Stream ID Support */
#define HCC_NSS(p) ((p) & (1 << 7))
/* true: HC supports Stopped - Short Packet */
#define HCC_SPC(p) ((p) & (1 << 9))
/* true: HC has Contiguous Frame ID Capability */
#define HCC_CFC(p) ((p) & (1 << 11))
/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
#define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1))
/* Extended Capabilities pointer from PCI base - section 5.3.6 */
#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p)
#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
/* db_off bitmask - bits 0:1 reserved */
#define DBOFF_MASK (~0x3)
/* run_regs_off bitmask - bits 0:4 reserved */
#define RTSOFF_MASK (~0x1f)
/* HCCPARAMS2 - hcc_params2 - bitmasks */
/* true: HC supports U3 entry Capability */
#define HCC2_U3C(p) ((p) & (1 << 0))
/* true: HC supports Configure endpoint command Max exit latency too large */
#define HCC2_CMC(p) ((p) & (1 << 1))
/* true: HC supports Force Save context Capability */
#define HCC2_FSC(p) ((p) & (1 << 2))
/* true: HC supports Compliance Transition Capability */
#define HCC2_CTC(p) ((p) & (1 << 3))
/* true: HC support Large ESIT payload Capability > 48k */
#define HCC2_LEC(p) ((p) & (1 << 4))
/* true: HC support Configuration Information Capability */
#define HCC2_CIC(p) ((p) & (1 << 5))
/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */
#define HCC2_ETC(p) ((p) & (1 << 6))
/* Number of registers per port */
#define NUM_PORT_REGS 4
#define PORTSC 0
#define PORTPMSC 1
#define PORTLI 2
#define PORTHLPMC 3
/**
* struct xhci_op_regs - xHCI Host Controller Operational Registers.
* @command: USBCMD - xHC command register
* @status: USBSTS - xHC status register
* @page_size: This indicates the page size that the host controller
* supports. If bit n is set, the HC supports a page size
* of 2^(n+12), up to a 128MB page size.
* 4K is the minimum page size.
* @cmd_ring: CRP - 64-bit Command Ring Pointer
* @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer
* @config_reg: CONFIG - Configure Register
* @port_status_base: PORTSCn - base address for Port Status and Control
* Each port has a Port Status and Control register,
* followed by a Port Power Management Status and Control
* register, a Port Link Info register, and a reserved
* register.
* @port_power_base: PORTPMSCn - base address for
* Port Power Management Status and Control
* @port_link_base: PORTLIn - base address for Port Link Info (current
* Link PM state and control) for USB 2.1 and USB 3.0
* devices.
*/
struct xhci_op_regs {
__le32 command;
__le32 status;
__le32 page_size;
__le32 reserved1;
__le32 reserved2;
__le32 dev_notification;
__le64 cmd_ring;
/* rsvd: offset 0x20-2F */
__le32 reserved3[4];
__le64 dcbaa_ptr;
__le32 config_reg;
/* rsvd: offset 0x3C-3FF */
__le32 reserved4[241];
/* port 1 registers, which serve as a base address for other ports */
__le32 port_status_base;
__le32 port_power_base;
__le32 port_link_base;
__le32 reserved5;
/* registers for ports 2-255 */
__le32 reserved6[NUM_PORT_REGS*254];
};
/* USBCMD - USB command - command bitmasks */
/* start/stop HC execution - do not write unless HC is halted*/
#define CMD_RUN XHCI_CMD_RUN
/* Reset HC - resets internal HC state machine and all registers (except
* PCI config regs). HC does NOT drive a USB reset on the downstream ports.
* The xHCI driver must reinitialize the xHC after setting this bit.
*/
#define CMD_RESET (1 << 1)
/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
#define CMD_EIE XHCI_CMD_EIE
/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
#define CMD_HSEIE XHCI_CMD_HSEIE
/* bits 4:6 are reserved (and should be preserved on writes). */
/* light reset (port status stays unchanged) - reset completed when this is 0 */
#define CMD_LRESET (1 << 7)
/* host controller save/restore state. */
#define CMD_CSS (1 << 8)
#define CMD_CRS (1 << 9)
/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
#define CMD_EWE XHCI_CMD_EWE
/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
* hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
* '0' means the xHC can power it off if all ports are in the disconnect,
* disabled, or powered-off state.
*/
#define CMD_PM_INDEX (1 << 11)
/* bit 14 Extended TBC Enable, changes Isoc TRB fields to support larger TBC */
#define CMD_ETE (1 << 14)
/* bits 15:31 are reserved (and should be preserved on writes). */
/* IMAN - Interrupt Management Register */
#define IMAN_IE (1 << 1)
#define IMAN_IP (1 << 0)
/* USBSTS - USB status - status bitmasks */
/* HC not running - set to 1 when run/stop bit is cleared. */
#define STS_HALT XHCI_STS_HALT
/* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */
#define STS_FATAL (1 << 2)
/* event interrupt - clear this prior to clearing any IP flags in IR set*/
#define STS_EINT (1 << 3)
/* port change detect */
#define STS_PORT (1 << 4)
/* bits 5:7 reserved and zeroed */
/* save state status - '1' means xHC is saving state */
#define STS_SAVE (1 << 8)
/* restore state status - '1' means xHC is restoring state */
#define STS_RESTORE (1 << 9)
/* true: save or restore error */
#define STS_SRE (1 << 10)
/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
#define STS_CNR XHCI_STS_CNR
/* true: internal Host Controller Error - SW needs to reset and reinitialize */
#define STS_HCE (1 << 12)
/* bits 13:31 reserved and should be preserved */
/*
* DNCTRL - Device Notification Control Register - dev_notification bitmasks
* Generate a device notification event when the HC sees a transaction with a
* notification type that matches a bit set in this bit field.
*/
#define DEV_NOTE_MASK (0xffff)
#define ENABLE_DEV_NOTE(x) (1 << (x))
/* Most of the device notification types should only be used for debug.
* SW does need to pay attention to function wake notifications.
*/
#define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1)
/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
/* bit 0 is the command ring cycle state */
/* stop ring operation after completion of the currently executing command */
#define CMD_RING_PAUSE (1 << 1)
/* stop ring immediately - abort the currently executing command */
#define CMD_RING_ABORT (1 << 2)
/* true: command ring is running */
#define CMD_RING_RUNNING (1 << 3)
/* bits 4:5 reserved and should be preserved */
/* Command Ring pointer - bit mask for the lower 32 bits. */
#define CMD_RING_RSVD_BITS (0x3f)
/* CONFIG - Configure Register - config_reg bitmasks */
/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
#define MAX_DEVS(p) ((p) & 0xff)
/* bit 8: U3 Entry Enabled, assert PLC when root port enters U3, xhci 1.1 */
#define CONFIG_U3E (1 << 8)
/* bit 9: Configuration Information Enable, xhci 1.1 */
#define CONFIG_CIE (1 << 9)
/* bits 10:31 - reserved and should be preserved */
/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
/* true: device connected */
#define PORT_CONNECT (1 << 0)
/* true: port enabled */
#define PORT_PE (1 << 1)
/* bit 2 reserved and zeroed */
/* true: port has an over-current condition */
#define PORT_OC (1 << 3)
/* true: port reset signaling asserted */
#define PORT_RESET (1 << 4)
/* Port Link State - bits 5:8
* A read gives the current link PM state of the port,
* a write with Link State Write Strobe set sets the link state.
*/
#define PORT_PLS_MASK (0xf << 5)
#define XDEV_U0 (0x0 << 5)
#define XDEV_U1 (0x1 << 5)
#define XDEV_U2 (0x2 << 5)
#define XDEV_U3 (0x3 << 5)
#define XDEV_DISABLED (0x4 << 5)
#define XDEV_RXDETECT (0x5 << 5)
#define XDEV_INACTIVE (0x6 << 5)
#define XDEV_POLLING (0x7 << 5)
#define XDEV_RECOVERY (0x8 << 5)
#define XDEV_HOT_RESET (0x9 << 5)
#define XDEV_COMP_MODE (0xa << 5)
#define XDEV_TEST_MODE (0xb << 5)
#define XDEV_RESUME (0xf << 5)
/* true: port has power (see HCC_PPC) */
#define PORT_POWER (1 << 9)
/* bits 10:13 indicate device speed:
* 0 - undefined speed - port hasn't be initialized by a reset yet
* 1 - full speed
* 2 - low speed
* 3 - high speed
* 4 - super speed
* 5-15 reserved
*/
#define DEV_SPEED_MASK (0xf << 10)
#define XDEV_FS (0x1 << 10)
#define XDEV_LS (0x2 << 10)
#define XDEV_HS (0x3 << 10)
#define XDEV_SS (0x4 << 10)
#define XDEV_SSP (0x5 << 10)
#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
#define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP)
#define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS)
#define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f)
/* Bits 20:23 in the Slot Context are the speed for the device */
#define SLOT_SPEED_FS (XDEV_FS << 10)
#define SLOT_SPEED_LS (XDEV_LS << 10)
#define SLOT_SPEED_HS (XDEV_HS << 10)
#define SLOT_SPEED_SS (XDEV_SS << 10)
#define SLOT_SPEED_SSP (XDEV_SSP << 10)
/* Port Indicator Control */
#define PORT_LED_OFF (0 << 14)
#define PORT_LED_AMBER (1 << 14)
#define PORT_LED_GREEN (2 << 14)
#define PORT_LED_MASK (3 << 14)
/* Port Link State Write Strobe - set this when changing link state */
#define PORT_LINK_STROBE (1 << 16)
/* true: connect status change */
#define PORT_CSC (1 << 17)
/* true: port enable change */
#define PORT_PEC (1 << 18)
/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port
* into an enabled state, and the device into the default state. A "warm" reset
* also resets the link, forcing the device through the link training sequence.
* SW can also look at the Port Reset register to see when warm reset is done.
*/
#define PORT_WRC (1 << 19)
/* true: over-current change */
#define PORT_OCC (1 << 20)
/* true: reset change - 1 to 0 transition of PORT_RESET */
#define PORT_RC (1 << 21)
/* port link status change - set on some port link state transitions:
* Transition Reason
* ------------------------------------------------------------------------------
* - U3 to Resume Wakeup signaling from a device
* - Resume to Recovery to U0 USB 3.0 device resume
* - Resume to U0 USB 2.0 device resume
* - U3 to Recovery to U0 Software resume of USB 3.0 device complete
* - U3 to U0 Software resume of USB 2.0 device complete
* - U2 to U0 L1 resume of USB 2.1 device complete
* - U0 to U0 (???) L1 entry rejection by USB 2.1 device
* - U0 to disabled L1 entry error with USB 2.1 device
* - Any state to inactive Error on USB 3.0 port
*/
#define PORT_PLC (1 << 22)
/* port configure error change - port failed to configure its link partner */
#define PORT_CEC (1 << 23)
#define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
PORT_RC | PORT_PLC | PORT_CEC)
/* Cold Attach Status - xHC can set this bit to report device attached during
* Sx state. Warm port reset should be perfomed to clear this bit and move port
* to connected state.
*/
#define PORT_CAS (1 << 24)
/* wake on connect (enable) */
#define PORT_WKCONN_E (1 << 25)
/* wake on disconnect (enable) */
#define PORT_WKDISC_E (1 << 26)
/* wake on over-current (enable) */
#define PORT_WKOC_E (1 << 27)
/* bits 28:29 reserved */
/* true: device is non-removable - for USB 3.0 roothub emulation */
#define PORT_DEV_REMOVE (1 << 30)
/* Initiate a warm port reset - complete when PORT_WRC is '1' */
#define PORT_WR (1 << 31)
/* We mark duplicate entries with -1 */
#define DUPLICATE_ENTRY ((u8)(-1))
/* Port Power Management Status and Control - port_power_base bitmasks */
/* Inactivity timer value for transitions into U1, in microseconds.
* Timeout can be up to 127us. 0xFF means an infinite timeout.
*/
#define PORT_U1_TIMEOUT(p) ((p) & 0xff)
#define PORT_U1_TIMEOUT_MASK 0xff
/* Inactivity timer value for transitions into U2 */
#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
#define PORT_U2_TIMEOUT_MASK (0xff << 8)
/* Bits 24:31 for port testing */
/* USB2 Protocol PORTSPMSC */
#define PORT_L1S_MASK 7
#define PORT_L1S_SUCCESS 1
#define PORT_RWE (1 << 3)
#define PORT_HIRD(p) (((p) & 0xf) << 4)
#define PORT_HIRD_MASK (0xf << 4)
#define PORT_L1DS_MASK (0xff << 8)
#define PORT_L1DS(p) (((p) & 0xff) << 8)
#define PORT_HLE (1 << 16)
#define PORT_TEST_MODE_SHIFT 28
/* USB3 Protocol PORTLI Port Link Information */
#define PORT_RX_LANES(p) (((p) >> 16) & 0xf)
#define PORT_TX_LANES(p) (((p) >> 20) & 0xf)
/* USB2 Protocol PORTHLPMC */
#define PORT_HIRDM(p)((p) & 3)
#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2)
#define PORT_BESLD(p)(((p) & 0xf) << 10)
/* use 512 microseconds as USB2 LPM L1 default timeout. */
#define XHCI_L1_TIMEOUT 512
/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency.
* Safe to use with mixed HIRD and BESL systems (host and device) and is used
* by other operating systems.
*
* XHCI 1.0 errata 8/14/12 Table 13 notes:
* "Software should choose xHC BESL/BESLD field values that do not violate a
* device's resume latency requirements,
* e.g. not program values > '4' if BLC = '1' and a HIRD device is attached,
* or not program values < '4' if BLC = '0' and a BESL device is attached.
*/
#define XHCI_DEFAULT_BESL 4
/*
* USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports
* to complete link training. usually link trainig completes much faster
* so check status 10 times with 36ms sleep in places we need to wait for
* polling to complete.
*/
#define XHCI_PORT_POLLING_LFPS_TIME 36
/**
* struct xhci_intr_reg - Interrupt Register Set
* @irq_pending: IMAN - Interrupt Management Register. Used to enable
* interrupts and check for pending interrupts.
* @irq_control: IMOD - Interrupt Moderation Register.
* Used to throttle interrupts.
* @erst_size: Number of segments in the Event Ring Segment Table (ERST).
* @erst_base: ERST base address.
* @erst_dequeue: Event ring dequeue pointer.
*
* Each interrupter (defined by a MSI-X vector) has an event ring and an Event
* Ring Segment Table (ERST) associated with it. The event ring is comprised of
* multiple segments of the same size. The HC places events on the ring and
* "updates the Cycle bit in the TRBs to indicate to software the current
* position of the Enqueue Pointer." The HCD (Linux) processes those events and
* updates the dequeue pointer.
*/
struct xhci_intr_reg {
__le32 irq_pending;
__le32 irq_control;
__le32 erst_size;
__le32 rsvd;
__le64 erst_base;
__le64 erst_dequeue;
};
/* irq_pending bitmasks */
#define ER_IRQ_PENDING(p) ((p) & 0x1)
/* bits 2:31 need to be preserved */
/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
#define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe)
#define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2)
#define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2))
/* irq_control bitmasks */
/* Minimum interval between interrupts (in 250ns intervals). The interval
* between interrupts will be longer if there are no events on the event ring.
* Default is 4000 (1 ms).
*/
#define ER_IRQ_INTERVAL_MASK (0xffff)
/* Counter used to count down the time to the next interrupt - HW use only */
#define ER_IRQ_COUNTER_MASK (0xffff << 16)
/* erst_size bitmasks */
/* Preserve bits 16:31 of erst_size */
#define ERST_SIZE_MASK (0xffff << 16)
/* erst_dequeue bitmasks */
/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
* where the current dequeue pointer lies. This is an optional HW hint.
*/
#define ERST_DESI_MASK (0x7)
/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
* a work queue (or delayed service routine)?
*/
#define ERST_EHB (1 << 3)
#define ERST_PTR_MASK (0xf)
/**
* struct xhci_run_regs
* @microframe_index:
* MFINDEX - current microframe number
*
* Section 5.5 Host Controller Runtime Registers:
* "Software should read and write these registers using only Dword (32 bit)
* or larger accesses"
*/
struct xhci_run_regs {
__le32 microframe_index;
__le32 rsvd[7];
struct xhci_intr_reg ir_set[128];
};
/**
* struct doorbell_array
*
* Bits 0 - 7: Endpoint target
* Bits 8 - 15: RsvdZ
* Bits 16 - 31: Stream ID
*
* Section 5.6
*/
struct xhci_doorbell_array {
__le32 doorbell[256];
};
#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
#define DB_VALUE_HOST 0x00000000
/**
* struct xhci_protocol_caps
* @revision: major revision, minor revision, capability ID,
* and next capability pointer.
* @name_string: Four ASCII characters to say which spec this xHC
* follows, typically "USB ".
* @port_info: Port offset, count, and protocol-defined information.
*/
struct xhci_protocol_caps {
u32 revision;
u32 name_string;
u32 port_info;
};
#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff)
#define XHCI_EXT_PORT_PSIC(x) (((x) >> 28) & 0x0f)
#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
#define XHCI_EXT_PORT_PSIV(x) (((x) >> 0) & 0x0f)
#define XHCI_EXT_PORT_PSIE(x) (((x) >> 4) & 0x03)
#define XHCI_EXT_PORT_PLT(x) (((x) >> 6) & 0x03)
#define XHCI_EXT_PORT_PFD(x) (((x) >> 8) & 0x01)
#define XHCI_EXT_PORT_LP(x) (((x) >> 14) & 0x03)
#define XHCI_EXT_PORT_PSIM(x) (((x) >> 16) & 0xffff)
#define PLT_MASK (0x03 << 6)
#define PLT_SYM (0x00 << 6)
#define PLT_ASYM_RX (0x02 << 6)
#define PLT_ASYM_TX (0x03 << 6)
/**
* struct xhci_container_ctx
* @type: Type of context. Used to calculated offsets to contained contexts.
* @size: Size of the context data
* @bytes: The raw context data given to HW
* @dma: dma address of the bytes
*
* Represents either a Device or Input context. Holds a pointer to the raw
* memory used for the context (bytes) and dma address of it (dma).
*/
struct xhci_container_ctx {
unsigned type;
#define XHCI_CTX_TYPE_DEVICE 0x1
#define XHCI_CTX_TYPE_INPUT 0x2
int size;
u8 *bytes;
dma_addr_t dma;
};
/**
* struct xhci_slot_ctx
* @dev_info: Route string, device speed, hub info, and last valid endpoint
* @dev_info2: Max exit latency for device number, root hub port number
* @tt_info: tt_info is used to construct split transaction tokens
* @dev_state: slot state and device address
*
* Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context
* structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
* reserved at the end of the slot context for HC internal use.
*/
struct xhci_slot_ctx {
__le32 dev_info;
__le32 dev_info2;
__le32 tt_info;
__le32 dev_state;
/* offset 0x10 to 0x1f reserved for HC internal use */
__le32 reserved[4];
};
/* dev_info bitmasks */
/* Route String - 0:19 */
#define ROUTE_STRING_MASK (0xfffff)
/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
#define DEV_SPEED (0xf << 20)
#define GET_DEV_SPEED(n) (((n) & DEV_SPEED) >> 20)
/* bit 24 reserved */
/* Is this LS/FS device connected through a HS hub? - bit 25 */
#define DEV_MTT (0x1 << 25)
/* Set if the device is a hub - bit 26 */
#define DEV_HUB (0x1 << 26)
/* Index of the last valid endpoint context in this device context - 27:31 */
#define LAST_CTX_MASK (0x1f << 27)
#define LAST_CTX(p) ((p) << 27)
#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
#define SLOT_FLAG (1 << 0)
#define EP0_FLAG (1 << 1)
/* dev_info2 bitmasks */
/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
#define MAX_EXIT (0xffff)
/* Root hub port number that is needed to access the USB device */
#define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
#define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff)
/* Maximum number of ports under a hub device */
#define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24)
#define DEVINFO_TO_MAX_PORTS(p) (((p) & (0xff << 24)) >> 24)
/* tt_info bitmasks */
/*
* TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
* The Slot ID of the hub that isolates the high speed signaling from
* this low or full-speed device. '0' if attached to root hub port.
*/
#define TT_SLOT (0xff)
/*
* The number of the downstream facing port of the high-speed hub
* '0' if the device is not low or full speed.
*/
#define TT_PORT (0xff << 8)
#define TT_THINK_TIME(p) (((p) & 0x3) << 16)
#define GET_TT_THINK_TIME(p) (((p) & (0x3 << 16)) >> 16)
/* dev_state bitmasks */
/* USB device address - assigned by the HC */
#define DEV_ADDR_MASK (0xff)
/* bits 8:26 reserved */
/* Slot state */
#define SLOT_STATE (0x1f << 27)
#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
#define SLOT_STATE_DISABLED 0
#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
#define SLOT_STATE_DEFAULT 1
#define SLOT_STATE_ADDRESSED 2
#define SLOT_STATE_CONFIGURED 3
/**
* struct xhci_ep_ctx
* @ep_info: endpoint state, streams, mult, and interval information.
* @ep_info2: information on endpoint type, max packet size, max burst size,
* error count, and whether the HC will force an event for all
* transactions.
* @deq: 64-bit ring dequeue pointer address. If the endpoint only
* defines one stream, this points to the endpoint transfer ring.
* Otherwise, it points to a stream context array, which has a
* ring pointer for each flow.
* @tx_info:
* Average TRB lengths for the endpoint ring and
* max payload within an Endpoint Service Interval Time (ESIT).
*
* Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context
* structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
* reserved at the end of the endpoint context for HC internal use.
*/
struct xhci_ep_ctx {
__le32 ep_info;
__le32 ep_info2;
__le64 deq;
__le32 tx_info;
/* offset 0x14 - 0x1f reserved for HC internal use */
__le32 reserved[3];
};
/* ep_info bitmasks */
/*
* Endpoint State - bits 0:2
* 0 - disabled
* 1 - running
* 2 - halted due to halt condition - ok to manipulate endpoint ring
* 3 - stopped
* 4 - TRB error
* 5-7 - reserved
*/
#define EP_STATE_MASK (0x7)
#define EP_STATE_DISABLED 0
#define EP_STATE_RUNNING 1
#define EP_STATE_HALTED 2
#define EP_STATE_STOPPED 3
#define EP_STATE_ERROR 4
#define GET_EP_CTX_STATE(ctx) (le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK)
/* Mult - Max number of burtst within an interval, in EP companion desc. */
#define EP_MULT(p) (((p) & 0x3) << 8)
#define CTX_TO_EP_MULT(p) (((p) >> 8) & 0x3)
/* bits 10:14 are Max Primary Streams */
/* bit 15 is Linear Stream Array */
/* Interval - period between requests to an endpoint - 125u increments. */
#define EP_INTERVAL(p) (((p) & 0xff) << 16)
#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff))
#define CTX_TO_EP_INTERVAL(p) (((p) >> 16) & 0xff)
#define EP_MAXPSTREAMS_MASK (0x1f << 10)
#define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK)
#define CTX_TO_EP_MAXPSTREAMS(p) (((p) & EP_MAXPSTREAMS_MASK) >> 10)
/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
#define EP_HAS_LSA (1 << 15)
/* hosts with LEC=1 use bits 31:24 as ESIT high bits. */
#define CTX_TO_MAX_ESIT_PAYLOAD_HI(p) (((p) >> 24) & 0xff)
/* ep_info2 bitmasks */
/*
* Force Event - generate transfer events for all TRBs for this endpoint
* This will tell the HC to ignore the IOC and ISP flags (for debugging only).
*/
#define FORCE_EVENT (0x1)
#define ERROR_COUNT(p) (((p) & 0x3) << 1)
#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7)
#define EP_TYPE(p) ((p) << 3)
#define ISOC_OUT_EP 1
#define BULK_OUT_EP 2
#define INT_OUT_EP 3
#define CTRL_EP 4
#define ISOC_IN_EP 5
#define BULK_IN_EP 6
#define INT_IN_EP 7
/* bit 6 reserved */
/* bit 7 is Host Initiate Disable - for disabling stream selection */
#define MAX_BURST(p) (((p)&0xff) << 8)
#define CTX_TO_MAX_BURST(p) (((p) >> 8) & 0xff)
#define MAX_PACKET(p) (((p)&0xffff) << 16)
#define MAX_PACKET_MASK (0xffff << 16)
#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
/* tx_info bitmasks */
#define EP_AVG_TRB_LENGTH(p) ((p) & 0xffff)
#define EP_MAX_ESIT_PAYLOAD_LO(p) (((p) & 0xffff) << 16)
#define EP_MAX_ESIT_PAYLOAD_HI(p) ((((p) >> 16) & 0xff) << 24)
#define CTX_TO_MAX_ESIT_PAYLOAD(p) (((p) >> 16) & 0xffff)
/* deq bitmasks */
#define EP_CTX_CYCLE_MASK (1 << 0)
#define SCTX_DEQ_MASK (~0xfL)
/**
* struct xhci_input_control_context
* Input control context; see section 6.2.5.
*
* @drop_context: set the bit of the endpoint context you want to disable
* @add_context: set the bit of the endpoint context you want to enable
*/
struct xhci_input_control_ctx {
__le32 drop_flags;
__le32 add_flags;
__le32 rsvd2[6];
};
#define EP_IS_ADDED(ctrl_ctx, i) \
(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))
#define EP_IS_DROPPED(ctrl_ctx, i) \
(le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1)))
/* Represents everything that is needed to issue a command on the command ring.
* It's useful to pre-allocate these for commands that cannot fail due to
* out-of-memory errors, like freeing streams.
*/
struct xhci_command {
/* Input context for changing device state */
struct xhci_container_ctx *in_ctx;
u32 status;
int slot_id;
/* If completion is null, no one is waiting on this command
* and the structure can be freed after the command completes.
*/
struct completion *completion;
union xhci_trb *command_trb;
struct list_head cmd_list;
};
/* drop context bitmasks */
#define DROP_EP(x) (0x1 << x)
/* add context bitmasks */
#define ADD_EP(x) (0x1 << x)
struct xhci_stream_ctx {
/* 64-bit stream ring address, cycle state, and stream type */
__le64 stream_ring;
/* offset 0x14 - 0x1f reserved for HC internal use */
__le32 reserved[2];
};
/* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
#define SCT_FOR_CTX(p) (((p) & 0x7) << 1)
/* Secondary stream array type, dequeue pointer is to a transfer ring */
#define SCT_SEC_TR 0
/* Primary stream array type, dequeue pointer is to a transfer ring */
#define SCT_PRI_TR 1
/* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */
#define SCT_SSA_8 2
#define SCT_SSA_16 3
#define SCT_SSA_32 4
#define SCT_SSA_64 5
#define SCT_SSA_128 6
#define SCT_SSA_256 7
/* Assume no secondary streams for now */
struct xhci_stream_info {
struct xhci_ring **stream_rings;
/* Number of streams, including stream 0 (which drivers can't use) */
unsigned int num_streams;
/* The stream context array may be bigger than
* the number of streams the driver asked for
*/
struct xhci_stream_ctx *stream_ctx_array;
unsigned int num_stream_ctxs;
dma_addr_t ctx_array_dma;
/* For mapping physical TRB addresses to segments in stream rings */
struct radix_tree_root trb_address_map;
struct xhci_command *free_streams_command;
};
#define SMALL_STREAM_ARRAY_SIZE 256
#define MEDIUM_STREAM_ARRAY_SIZE 1024
/* Some Intel xHCI host controllers need software to keep track of the bus
* bandwidth. Keep track of endpoint info here. Each root port is allocated
* the full bus bandwidth. We must also treat TTs (including each port under a
* multi-TT hub) as a separate bandwidth domain. The direct memory interface
* (DMI) also limits the total bandwidth (across all domains) that can be used.
*/
struct xhci_bw_info {
/* ep_interval is zero-based */
unsigned int ep_interval;
/* mult and num_packets are one-based */
unsigned int mult;
unsigned int num_packets;
unsigned int max_packet_size;
unsigned int max_esit_payload;
unsigned int type;
};
/* "Block" sizes in bytes the hardware uses for different device speeds.
* The logic in this part of the hardware limits the number of bits the hardware
* can use, so must represent bandwidth in a less precise manner to mimic what
* the scheduler hardware computes.
*/
#define FS_BLOCK 1
#define HS_BLOCK 4
#define SS_BLOCK 16
#define DMI_BLOCK 32
/* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated
* with each byte transferred. SuperSpeed devices have an initial overhead to
* set up bursts. These are in blocks, see above. LS overhead has already been
* translated into FS blocks.
*/
#define DMI_OVERHEAD 8
#define DMI_OVERHEAD_BURST 4
#define SS_OVERHEAD 8
#define SS_OVERHEAD_BURST 32
#define HS_OVERHEAD 26
#define FS_OVERHEAD 20
#define LS_OVERHEAD 128
/* The TTs need to claim roughly twice as much bandwidth (94 bytes per
* microframe ~= 24Mbps) of the HS bus as the devices can actually use because
* of overhead associated with split transfers crossing microframe boundaries.
* 31 blocks is pure protocol overhead.
*/
#define TT_HS_OVERHEAD (31 + 94)
#define TT_DMI_OVERHEAD (25 + 12)
/* Bandwidth limits in blocks */
#define FS_BW_LIMIT 1285
#define TT_BW_LIMIT 1320
#define HS_BW_LIMIT 1607
#define SS_BW_LIMIT_IN 3906
#define DMI_BW_LIMIT_IN 3906
#define SS_BW_LIMIT_OUT 3906
#define DMI_BW_LIMIT_OUT 3906
/* Percentage of bus bandwidth reserved for non-periodic transfers */
#define FS_BW_RESERVED 10
#define HS_BW_RESERVED 20
#define SS_BW_RESERVED 10
struct xhci_virt_ep {
struct xhci_virt_device *vdev; /* parent */
unsigned int ep_index;
struct xhci_ring *ring;
/* Related to endpoints that are configured to use stream IDs only */
struct xhci_stream_info *stream_info;
/* Temporary storage in case the configure endpoint command fails and we
* have to restore the device state to the previous state
*/
struct xhci_ring *new_ring;
unsigned int ep_state;
#define SET_DEQ_PENDING (1 << 0)
#define EP_HALTED (1 << 1) /* For stall handling */
#define EP_STOP_CMD_PENDING (1 << 2) /* For URB cancellation */
/* Transitioning the endpoint to using streams, don't enqueue URBs */
#define EP_GETTING_STREAMS (1 << 3)
#define EP_HAS_STREAMS (1 << 4)
/* Transitioning the endpoint to not using streams, don't enqueue URBs */
#define EP_GETTING_NO_STREAMS (1 << 5)
#define EP_HARD_CLEAR_TOGGLE (1 << 6)
#define EP_SOFT_CLEAR_TOGGLE (1 << 7)
/* usb_hub_clear_tt_buffer is in progress */
#define EP_CLEARING_TT (1 << 8)
/* ---- Related to URB cancellation ---- */
struct list_head cancelled_td_list;
/* Watchdog timer for stop endpoint command to cancel URBs */
struct timer_list stop_cmd_timer;
struct xhci_hcd *xhci;
/* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue
* command. We'll need to update the ring's dequeue segment and dequeue
* pointer after the command completes.
*/
struct xhci_segment *queued_deq_seg;
union xhci_trb *queued_deq_ptr;
/*
* Sometimes the xHC can not process isochronous endpoint ring quickly
* enough, and it will miss some isoc tds on the ring and generate
* a Missed Service Error Event.
* Set skip flag when receive a Missed Service Error Event and
* process the missed tds on the endpoint ring.
*/
bool skip;
/* Bandwidth checking storage */
struct xhci_bw_info bw_info;
struct list_head bw_endpoint_list;
/* Isoch Frame ID checking storage */
int next_frame_id;
/* Use new Isoch TRB layout needed for extended TBC support */
bool use_extended_tbc;
};
enum xhci_overhead_type {
LS_OVERHEAD_TYPE = 0,
FS_OVERHEAD_TYPE,
HS_OVERHEAD_TYPE,
};
struct xhci_interval_bw {
unsigned int num_packets;
/* Sorted by max packet size.
* Head of the list is the greatest max packet size.
*/
struct list_head endpoints;
/* How many endpoints of each speed are present. */
unsigned int overhead[3];
};
#define XHCI_MAX_INTERVAL 16
struct xhci_interval_bw_table {
unsigned int interval0_esit_payload;
struct xhci_interval_bw interval_bw[XHCI_MAX_INTERVAL];
/* Includes reserved bandwidth for async endpoints */
unsigned int bw_used;
unsigned int ss_bw_in;
unsigned int ss_bw_out;
};
#define EP_CTX_PER_DEV 31
struct xhci_virt_device {
int slot_id;
struct usb_device *udev;
/*
* Commands to the hardware are passed an "input context" that
* tells the hardware what to change in its data structures.
* The hardware will return changes in an "output context" that
* software must allocate for the hardware. We need to keep
* track of input and output contexts separately because
* these commands might fail and we don't trust the hardware.
*/
struct xhci_container_ctx *out_ctx;
/* Used for addressing devices and configuration changes */
struct xhci_container_ctx *in_ctx;
struct xhci_virt_ep eps[EP_CTX_PER_DEV];
u8 fake_port;
u8 real_port;
struct xhci_interval_bw_table *bw_table;
struct xhci_tt_bw_info *tt_info;
/*
* flags for state tracking based on events and issued commands.
* Software can not rely on states from output contexts because of
* latency between events and xHC updating output context values.
* See xhci 1.1 section 4.8.3 for more details
*/
unsigned long flags;
#define VDEV_PORT_ERROR BIT(0) /* Port error, link inactive */
/* The current max exit latency for the enabled USB3 link states. */
u16 current_mel;
/* Used for the debugfs interfaces. */
void *debugfs_private;
};
/*
* For each roothub, keep track of the bandwidth information for each periodic
* interval.
*
* If a high speed hub is attached to the roothub, each TT associated with that
* hub is a separate bandwidth domain. The interval information for the
* endpoints on the devices under that TT will appear in the TT structure.
*/
struct xhci_root_port_bw_info {
struct list_head tts;
unsigned int num_active_tts;
struct xhci_interval_bw_table bw_table;
};
struct xhci_tt_bw_info {
struct list_head tt_list;
int slot_id;
int ttport;
struct xhci_interval_bw_table bw_table;
int active_eps;
};
/**
* struct xhci_device_context_array
* @dev_context_ptr array of 64-bit DMA addresses for device contexts
*/
struct xhci_device_context_array {
/* 64-bit device addresses; we only write 32-bit addresses */
__le64 dev_context_ptrs[MAX_HC_SLOTS];
/* private xHCD pointers */
dma_addr_t dma;
};
/* TODO: write function to set the 64-bit device DMA address */
/*
* TODO: change this to be dynamically sized at HC mem init time since the HC
* might not be able to handle the maximum number of devices possible.
*/
struct xhci_transfer_event {
/* 64-bit buffer address, or immediate data */
__le64 buffer;
__le32 transfer_len;
/* This field is interpreted differently based on the type of TRB */
__le32 flags;
};
/* Transfer event TRB length bit mask */
/* bits 0:23 */
#define EVENT_TRB_LEN(p) ((p) & 0xffffff)
/** Transfer Event bit fields **/
#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
/* Completion Code - only applicable for some types of TRBs */
#define COMP_CODE_MASK (0xff << 24)
#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
#define COMP_INVALID 0
#define COMP_SUCCESS 1
#define COMP_DATA_BUFFER_ERROR 2
#define COMP_BABBLE_DETECTED_ERROR 3
#define COMP_USB_TRANSACTION_ERROR 4
#define COMP_TRB_ERROR 5
#define COMP_STALL_ERROR 6
#define COMP_RESOURCE_ERROR 7
#define COMP_BANDWIDTH_ERROR 8
#define COMP_NO_SLOTS_AVAILABLE_ERROR 9
#define COMP_INVALID_STREAM_TYPE_ERROR 10
#define COMP_SLOT_NOT_ENABLED_ERROR 11
#define COMP_ENDPOINT_NOT_ENABLED_ERROR 12
#define COMP_SHORT_PACKET 13
#define COMP_RING_UNDERRUN 14
#define COMP_RING_OVERRUN 15
#define COMP_VF_EVENT_RING_FULL_ERROR 16
#define COMP_PARAMETER_ERROR 17
#define COMP_BANDWIDTH_OVERRUN_ERROR 18
#define COMP_CONTEXT_STATE_ERROR 19
#define COMP_NO_PING_RESPONSE_ERROR 20
#define COMP_EVENT_RING_FULL_ERROR 21
#define COMP_INCOMPATIBLE_DEVICE_ERROR 22
#define COMP_MISSED_SERVICE_ERROR 23
#define COMP_COMMAND_RING_STOPPED 24
#define COMP_COMMAND_ABORTED 25
#define COMP_STOPPED 26
#define COMP_STOPPED_LENGTH_INVALID 27
#define COMP_STOPPED_SHORT_PACKET 28
#define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR 29
#define COMP_ISOCH_BUFFER_OVERRUN 31
#define COMP_EVENT_LOST_ERROR 32
#define COMP_UNDEFINED_ERROR 33
#define COMP_INVALID_STREAM_ID_ERROR 34
#define COMP_SECONDARY_BANDWIDTH_ERROR 35
#define COMP_SPLIT_TRANSACTION_ERROR 36
static inline const char *xhci_trb_comp_code_string(u8 status)
{
switch (status) {
case COMP_INVALID:
return "Invalid";
case COMP_SUCCESS:
return "Success";
case COMP_DATA_BUFFER_ERROR:
return "Data Buffer Error";
case COMP_BABBLE_DETECTED_ERROR:
return "Babble Detected";
case COMP_USB_TRANSACTION_ERROR:
return "USB Transaction Error";
case COMP_TRB_ERROR:
return "TRB Error";
case COMP_STALL_ERROR:
return "Stall Error";
case COMP_RESOURCE_ERROR:
return "Resource Error";
case COMP_BANDWIDTH_ERROR:
return "Bandwidth Error";
case COMP_NO_SLOTS_AVAILABLE_ERROR:
return "No Slots Available Error";
case COMP_INVALID_STREAM_TYPE_ERROR:
return "Invalid Stream Type Error";
case COMP_SLOT_NOT_ENABLED_ERROR:
return "Slot Not Enabled Error";
case COMP_ENDPOINT_NOT_ENABLED_ERROR:
return "Endpoint Not Enabled Error";
case COMP_SHORT_PACKET:
return "Short Packet";
case COMP_RING_UNDERRUN:
return "Ring Underrun";
case COMP_RING_OVERRUN:
return "Ring Overrun";
case COMP_VF_EVENT_RING_FULL_ERROR:
return "VF Event Ring Full Error";
case COMP_PARAMETER_ERROR:
return "Parameter Error";
case COMP_BANDWIDTH_OVERRUN_ERROR:
return "Bandwidth Overrun Error";
case COMP_CONTEXT_STATE_ERROR:
return "Context State Error";
case COMP_NO_PING_RESPONSE_ERROR:
return "No Ping Response Error";
case COMP_EVENT_RING_FULL_ERROR:
return "Event Ring Full Error";
case COMP_INCOMPATIBLE_DEVICE_ERROR:
return "Incompatible Device Error";
case COMP_MISSED_SERVICE_ERROR:
return "Missed Service Error";
case COMP_COMMAND_RING_STOPPED:
return "Command Ring Stopped";
case COMP_COMMAND_ABORTED:
return "Command Aborted";
case COMP_STOPPED:
return "Stopped";
case COMP_STOPPED_LENGTH_INVALID:
return "Stopped - Length Invalid";
case COMP_STOPPED_SHORT_PACKET:
return "Stopped - Short Packet";
case COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR:
return "Max Exit Latency Too Large Error";
case COMP_ISOCH_BUFFER_OVERRUN:
return "Isoch Buffer Overrun";
case COMP_EVENT_LOST_ERROR:
return "Event Lost Error";
case COMP_UNDEFINED_ERROR:
return "Undefined Error";
case COMP_INVALID_STREAM_ID_ERROR:
return "Invalid Stream ID Error";
case COMP_SECONDARY_BANDWIDTH_ERROR:
return "Secondary Bandwidth Error";
case COMP_SPLIT_TRANSACTION_ERROR:
return "Split Transaction Error";
default:
return "Unknown!!";
}
}
struct xhci_link_trb {
/* 64-bit segment pointer*/
__le64 segment_ptr;
__le32 intr_target;
__le32 control;
};
/* control bitfields */
#define LINK_TOGGLE (0x1<<1)
/* Command completion event TRB */
struct xhci_event_cmd {
/* Pointer to command TRB, or the value passed by the event data trb */
__le64 cmd_trb;
__le32 status;
__le32 flags;
};
/* flags bitmasks */
/* Address device - disable SetAddress */
#define TRB_BSR (1<<9)
/* Configure Endpoint - Deconfigure */
#define TRB_DC (1<<9)
/* Stop Ring - Transfer State Preserve */
#define TRB_TSP (1<<9)
enum xhci_ep_reset_type {
EP_HARD_RESET,
EP_SOFT_RESET,
};
/* Force Event */
#define TRB_TO_VF_INTR_TARGET(p) (((p) & (0x3ff << 22)) >> 22)
#define TRB_TO_VF_ID(p) (((p) & (0xff << 16)) >> 16)
/* Set Latency Tolerance Value */
#define TRB_TO_BELT(p) (((p) & (0xfff << 16)) >> 16)
/* Get Port Bandwidth */
#define TRB_TO_DEV_SPEED(p) (((p) & (0xf << 16)) >> 16)
/* Force Header */
#define TRB_TO_PACKET_TYPE(p) ((p) & 0x1f)
#define TRB_TO_ROOTHUB_PORT(p) (((p) & (0xff << 24)) >> 24)
enum xhci_setup_dev {
SETUP_CONTEXT_ONLY,
SETUP_CONTEXT_ADDRESS,
};
/* bits 16:23 are the virtual function ID */
/* bits 24:31 are the slot ID */
#define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24)
#define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24)
/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
#define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
#define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23)
#define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23)
#define LAST_EP_INDEX 30
/* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */
#define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16))
#define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16)
#define SCT_FOR_TRB(p) (((p) << 1) & 0x7)
/* Link TRB specific fields */
#define TRB_TC (1<<1)
/* Port Status Change Event TRB fields */
/* Port ID - bits 31:24 */
#define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24)
#define EVENT_DATA (1 << 2)
/* Normal TRB fields */
/* transfer_len bitmasks - bits 0:16 */
#define TRB_LEN(p) ((p) & 0x1ffff)
/* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31) */
#define TRB_TD_SIZE(p) (min((p), (u32)31) << 17)
#define GET_TD_SIZE(p) (((p) & 0x3e0000) >> 17)
/* xhci 1.1 uses the TD_SIZE field for TBC if Extended TBC is enabled (ETE) */
#define TRB_TD_SIZE_TBC(p) (min((p), (u32)31) << 17)
/* Interrupter Target - which MSI-X vector to target the completion event at */
#define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
#define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
/* Total burst count field, Rsvdz on xhci 1.1 with Extended TBC enabled (ETE) */
#define TRB_TBC(p) (((p) & 0x3) << 7)
#define TRB_TLBPC(p) (((p) & 0xf) << 16)
/* Cycle bit - indicates TRB ownership by HC or HCD */
#define TRB_CYCLE (1<<0)
/*
* Force next event data TRB to be evaluated before task switch.
* Used to pass OS data back after a TD completes.
*/
#define TRB_ENT (1<<1)
/* Interrupt on short packet */
#define TRB_ISP (1<<2)
/* Set PCIe no snoop attribute */
#define TRB_NO_SNOOP (1<<3)
/* Chain multiple TRBs into a TD */
#define TRB_CHAIN (1<<4)
/* Interrupt on completion */
#define TRB_IOC (1<<5)
/* The buffer pointer contains immediate data */
#define TRB_IDT (1<<6)
/* TDs smaller than this might use IDT */
#define TRB_IDT_MAX_SIZE 8
/* Block Event Interrupt */
#define TRB_BEI (1<<9)
/* Control transfer TRB specific fields */
#define TRB_DIR_IN (1<<16)
#define TRB_TX_TYPE(p) ((p) << 16)
#define TRB_DATA_OUT 2
#define TRB_DATA_IN 3
/* Isochronous TRB specific fields */
#define TRB_SIA (1<<31)
#define TRB_FRAME_ID(p) (((p) & 0x7ff) << 20)
/* TRB cache size for xHC with TRB cache */
#define TRB_CACHE_SIZE_HS 8
#define TRB_CACHE_SIZE_SS 16
struct xhci_generic_trb {
__le32 field[4];
};
union xhci_trb {
struct xhci_link_trb link;
struct xhci_transfer_event trans_event;
struct xhci_event_cmd event_cmd;
struct xhci_generic_trb generic;
};
/* TRB bit mask */
#define TRB_TYPE_BITMASK (0xfc00)
#define TRB_TYPE(p) ((p) << 10)
#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
/* TRB type IDs */
/* bulk, interrupt, isoc scatter/gather, and control data stage */
#define TRB_NORMAL 1
/* setup stage for control transfers */
#define TRB_SETUP 2
/* data stage for control transfers */
#define TRB_DATA 3
/* status stage for control transfers */
#define TRB_STATUS 4
/* isoc transfers */
#define TRB_ISOC 5
/* TRB for linking ring segments */
#define TRB_LINK 6
#define TRB_EVENT_DATA 7
/* Transfer Ring No-op (not for the command ring) */
#define TRB_TR_NOOP 8
/* Command TRBs */
/* Enable Slot Command */
#define TRB_ENABLE_SLOT 9
/* Disable Slot Command */
#define TRB_DISABLE_SLOT 10
/* Address Device Command */
#define TRB_ADDR_DEV 11
/* Configure Endpoint Command */
#define TRB_CONFIG_EP 12
/* Evaluate Context Command */
#define TRB_EVAL_CONTEXT 13
/* Reset Endpoint Command */
#define TRB_RESET_EP 14
/* Stop Transfer Ring Command */
#define TRB_STOP_RING 15
/* Set Transfer Ring Dequeue Pointer Command */
#define TRB_SET_DEQ 16
/* Reset Device Command */
#define TRB_RESET_DEV 17
/* Force Event Command (opt) */
#define TRB_FORCE_EVENT 18
/* Negotiate Bandwidth Command (opt) */
#define TRB_NEG_BANDWIDTH 19
/* Set Latency Tolerance Value Command (opt) */
#define TRB_SET_LT 20
/* Get port bandwidth Command */
#define TRB_GET_BW 21
/* Force Header Command - generate a transaction or link management packet */
#define TRB_FORCE_HEADER 22
/* No-op Command - not for transfer rings */
#define TRB_CMD_NOOP 23
/* TRB IDs 24-31 reserved */
/* Event TRBS */
/* Transfer Event */
#define TRB_TRANSFER 32
/* Command Completion Event */
#define TRB_COMPLETION 33
/* Port Status Change Event */
#define TRB_PORT_STATUS 34
/* Bandwidth Request Event (opt) */
#define TRB_BANDWIDTH_EVENT 35
/* Doorbell Event (opt) */
#define TRB_DOORBELL 36
/* Host Controller Event */
#define TRB_HC_EVENT 37
/* Device Notification Event - device sent function wake notification */
#define TRB_DEV_NOTE 38
/* MFINDEX Wrap Event - microframe counter wrapped */
#define TRB_MFINDEX_WRAP 39
/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
#define TRB_VENDOR_DEFINED_LOW 48
/* Nec vendor-specific command completion event. */
#define TRB_NEC_CMD_COMP 48
/* Get NEC firmware revision. */
#define TRB_NEC_GET_FW 49
static inline const char *xhci_trb_type_string(u8 type)
{
switch (type) {
case TRB_NORMAL:
return "Normal";
case TRB_SETUP:
return "Setup Stage";
case TRB_DATA:
return "Data Stage";
case TRB_STATUS:
return "Status Stage";
case TRB_ISOC:
return "Isoch";
case TRB_LINK:
return "Link";
case TRB_EVENT_DATA:
return "Event Data";
case TRB_TR_NOOP:
return "No-Op";
case TRB_ENABLE_SLOT:
return "Enable Slot Command";
case TRB_DISABLE_SLOT:
return "Disable Slot Command";
case TRB_ADDR_DEV:
return "Address Device Command";
case TRB_CONFIG_EP:
return "Configure Endpoint Command";
case TRB_EVAL_CONTEXT:
return "Evaluate Context Command";
case TRB_RESET_EP:
return "Reset Endpoint Command";
case TRB_STOP_RING:
return "Stop Ring Command";
case TRB_SET_DEQ:
return "Set TR Dequeue Pointer Command";
case TRB_RESET_DEV:
return "Reset Device Command";
case TRB_FORCE_EVENT:
return "Force Event Command";
case TRB_NEG_BANDWIDTH:
return "Negotiate Bandwidth Command";
case TRB_SET_LT:
return "Set Latency Tolerance Value Command";
case TRB_GET_BW:
return "Get Port Bandwidth Command";
case TRB_FORCE_HEADER:
return "Force Header Command";
case TRB_CMD_NOOP:
return "No-Op Command";
case TRB_TRANSFER:
return "Transfer Event";
case TRB_COMPLETION:
return "Command Completion Event";
case TRB_PORT_STATUS:
return "Port Status Change Event";
case TRB_BANDWIDTH_EVENT:
return "Bandwidth Request Event";
case TRB_DOORBELL:
return "Doorbell Event";
case TRB_HC_EVENT:
return "Host Controller Event";
case TRB_DEV_NOTE:
return "Device Notification Event";
case TRB_MFINDEX_WRAP:
return "MFINDEX Wrap Event";
case TRB_NEC_CMD_COMP:
return "NEC Command Completion Event";
case TRB_NEC_GET_FW:
return "NET Get Firmware Revision Command";
default:
return "UNKNOWN";
}
}
#define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
/* Above, but for __le32 types -- can avoid work by swapping constants: */
#define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
cpu_to_le32(TRB_TYPE(TRB_LINK)))
#define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
#define NEC_FW_MINOR(p) (((p) >> 0) & 0xff)
#define NEC_FW_MAJOR(p) (((p) >> 8) & 0xff)
/*
* TRBS_PER_SEGMENT must be a multiple of 4,
* since the command ring is 64-byte aligned.
* It must also be greater than 16.
*/
#define TRBS_PER_SEGMENT 256
/* Allow two commands + a link TRB, along with any reserved command TRBs */
#define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3)
#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
#define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE))
/* TRB buffer pointers can't cross 64KB boundaries */
#define TRB_MAX_BUFF_SHIFT 16
#define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)
/* How much data is left before the 64KB boundary? */
#define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_BUFF_SIZE - \
(addr & (TRB_MAX_BUFF_SIZE - 1)))
#define MAX_SOFT_RETRY 3
/*
* Limits of consecutive isoc trbs that can Block Event Interrupt (BEI) if
* XHCI_AVOID_BEI quirk is in use.
*/
#define AVOID_BEI_INTERVAL_MIN 8
#define AVOID_BEI_INTERVAL_MAX 32
struct xhci_segment {
union xhci_trb *trbs;
/* private to HCD */
struct xhci_segment *next;
dma_addr_t dma;
/* Max packet sized bounce buffer for td-fragmant alignment */
dma_addr_t bounce_dma;
void *bounce_buf;
unsigned int bounce_offs;
unsigned int bounce_len;
};
enum xhci_cancelled_td_status {
TD_DIRTY = 0,
TD_HALTED,
TD_CLEARING_CACHE,
TD_CLEARED,
};
struct xhci_td {
struct list_head td_list;
struct list_head cancelled_td_list;
int status;
enum xhci_cancelled_td_status cancel_status;
struct urb *urb;
struct xhci_segment *start_seg;
union xhci_trb *first_trb;
union xhci_trb *last_trb;
struct xhci_segment *last_trb_seg;
struct xhci_segment *bounce_seg;
/* actual_length of the URB has already been set */
bool urb_length_set;
unsigned int num_trbs;
};
/* xHCI command default timeout value */
#define XHCI_CMD_DEFAULT_TIMEOUT (5 * HZ)
/* command descriptor */
struct xhci_cd {
struct xhci_command *command;
union xhci_trb *cmd_trb;
};
enum xhci_ring_type {
TYPE_CTRL = 0,
TYPE_ISOC,
TYPE_BULK,
TYPE_INTR,
TYPE_STREAM,
TYPE_COMMAND,
TYPE_EVENT,
};
static inline const char *xhci_ring_type_string(enum xhci_ring_type type)
{
switch (type) {
case TYPE_CTRL:
return "CTRL";
case TYPE_ISOC:
return "ISOC";
case TYPE_BULK:
return "BULK";
case TYPE_INTR:
return "INTR";
case TYPE_STREAM:
return "STREAM";
case TYPE_COMMAND:
return "CMD";
case TYPE_EVENT:
return "EVENT";
}
return "UNKNOWN";
}
struct xhci_ring {
struct xhci_segment *first_seg;
struct xhci_segment *last_seg;
union xhci_trb *enqueue;
struct xhci_segment *enq_seg;
union xhci_trb *dequeue;
struct xhci_segment *deq_seg;
struct list_head td_list;
/*
* Write the cycle state into the TRB cycle field to give ownership of
* the TRB to the host controller (if we are the producer), or to check
* if we own the TRB (if we are the consumer). See section 4.9.1.
*/
u32 cycle_state;
unsigned int err_count;
unsigned int stream_id;
unsigned int num_segs;
unsigned int num_trbs_free;
unsigned int num_trbs_free_temp;
unsigned int bounce_buf_len;
enum xhci_ring_type type;
bool last_td_was_short;
struct radix_tree_root *trb_address_map;
};
struct xhci_erst_entry {
/* 64-bit event ring segment address */
__le64 seg_addr;
__le32 seg_size;
/* Set to zero */
__le32 rsvd;
};
struct xhci_erst {
struct xhci_erst_entry *entries;
unsigned int num_entries;
/* xhci->event_ring keeps track of segment dma addresses */
dma_addr_t erst_dma_addr;
/* Num entries the ERST can contain */
unsigned int erst_size;
};
struct xhci_scratchpad {
u64 *sp_array;
dma_addr_t sp_dma;
void **sp_buffers;
};
struct urb_priv {
int num_tds;
int num_tds_done;
struct xhci_td td[];
};
/*
* Each segment table entry is 4*32bits long. 1K seems like an ok size:
* (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
* meaning 64 ring segments.
* Initial allocated size of the ERST, in number of entries */
#define ERST_NUM_SEGS 1
/* Poll every 60 seconds */
#define POLL_TIMEOUT 60
/* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
#define XHCI_STOP_EP_CMD_TIMEOUT 5
/* XXX: Make these module parameters */
struct s3_save {
u32 command;
u32 dev_nt;
u64 dcbaa_ptr;
u32 config_reg;
u32 irq_pending;
u32 irq_control;
u32 erst_size;
u64 erst_base;
u64 erst_dequeue;
};
/* Use for lpm */
struct dev_info {
u32 dev_id;
struct list_head list;
};
struct xhci_bus_state {
unsigned long bus_suspended;
unsigned long next_statechange;
/* Port suspend arrays are indexed by the portnum of the fake roothub */
/* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
u32 port_c_suspend;
u32 suspended_ports;
u32 port_remote_wakeup;
unsigned long resume_done[USB_MAXCHILDREN];
/* which ports have started to resume */
unsigned long resuming_ports;
/* Which ports are waiting on RExit to U0 transition. */
unsigned long rexit_ports;
struct completion rexit_done[USB_MAXCHILDREN];
struct completion u3exit_done[USB_MAXCHILDREN];
};
/*
* It can take up to 20 ms to transition from RExit to U0 on the
* Intel Lynx Point LP xHCI host.
*/
#define XHCI_MAX_REXIT_TIMEOUT_MS 20
struct xhci_port_cap {
u32 *psi; /* array of protocol speed ID entries */
u8 psi_count;
u8 psi_uid_count;
u8 maj_rev;
u8 min_rev;
};
struct xhci_port {
__le32 __iomem *addr;
int hw_portnum;
int hcd_portnum;
struct xhci_hub *rhub;
struct xhci_port_cap *port_cap;
};
struct xhci_hub {
struct xhci_port **ports;
unsigned int num_ports;
struct usb_hcd *hcd;
/* keep track of bus suspend info */
struct xhci_bus_state bus_state;
/* supported prococol extended capabiliy values */
u8 maj_rev;
u8 min_rev;
};
/* There is one xhci_hcd structure per controller */
struct xhci_hcd {
struct usb_hcd *main_hcd;
struct usb_hcd *shared_hcd;
/* glue to PCI and HCD framework */
struct xhci_cap_regs __iomem *cap_regs;
struct xhci_op_regs __iomem *op_regs;
struct xhci_run_regs __iomem *run_regs;
struct xhci_doorbell_array __iomem *dba;
/* Our HCD's current interrupter register set */
struct xhci_intr_reg __iomem *ir_set;
/* Cached register copies of read-only HC data */
__u32 hcs_params1;
__u32 hcs_params2;
__u32 hcs_params3;
__u32 hcc_params;
__u32 hcc_params2;
spinlock_t lock;
/* packed release number */
u8 sbrn;
u16 hci_version;
u8 max_slots;
u8 max_interrupters;
u8 max_ports;
u8 isoc_threshold;
/* imod_interval in ns (I * 250ns) */
u32 imod_interval;
u32 isoc_bei_interval;
int event_ring_max;
/* 4KB min, 128MB max */
int page_size;
/* Valid values are 12 to 20, inclusive */
int page_shift;
/* msi-x vectors */
int msix_count;
/* optional clocks */
struct clk *clk;
struct clk *reg_clk;
/* optional reset controller */
struct reset_control *reset;
/* data structures */
struct xhci_device_context_array *dcbaa;
struct xhci_ring *cmd_ring;
unsigned int cmd_ring_state;
#define CMD_RING_STATE_RUNNING (1 << 0)
#define CMD_RING_STATE_ABORTED (1 << 1)
#define CMD_RING_STATE_STOPPED (1 << 2)
struct list_head cmd_list;
unsigned int cmd_ring_reserved_trbs;
struct delayed_work cmd_timer;
struct completion cmd_ring_stop_completion;
struct xhci_command *current_cmd;
struct xhci_ring *event_ring;
struct xhci_erst erst;
/* Scratchpad */
struct xhci_scratchpad *scratchpad;
/* Store LPM test failed devices' information */
struct list_head lpm_failed_devs;
/* slot enabling and address device helpers */
/* these are not thread safe so use mutex */
struct mutex mutex;
/* For USB 3.0 LPM enable/disable. */
struct xhci_command *lpm_command;
/* Internal mirror of the HW's dcbaa */
struct xhci_virt_device *devs[MAX_HC_SLOTS];
/* For keeping track of bandwidth domains per roothub. */
struct xhci_root_port_bw_info *rh_bw;
/* DMA pools */
struct dma_pool *device_pool;
struct dma_pool *segment_pool;
struct dma_pool *small_streams_pool;
struct dma_pool *medium_streams_pool;
/* Host controller watchdog timer structures */
unsigned int xhc_state;
u32 command;
struct s3_save s3;
/* Host controller is dying - not responding to commands. "I'm not dead yet!"
*
* xHC interrupts have been disabled and a watchdog timer will (or has already)
* halt the xHCI host, and complete all URBs with an -ESHUTDOWN code. Any code
* that sees this status (other than the timer that set it) should stop touching
* hardware immediately. Interrupt handlers should return immediately when
* they see this status (any time they drop and re-acquire xhci->lock).
* xhci_urb_dequeue() should call usb_hcd_check_unlink_urb() and return without
* putting the TD on the canceled list, etc.
*
* There are no reports of xHCI host controllers that display this issue.
*/
#define XHCI_STATE_DYING (1 << 0)
#define XHCI_STATE_HALTED (1 << 1)
#define XHCI_STATE_REMOVING (1 << 2)
unsigned long long quirks;
#define XHCI_LINK_TRB_QUIRK BIT_ULL(0)
#define XHCI_RESET_EP_QUIRK BIT_ULL(1)
#define XHCI_NEC_HOST BIT_ULL(2)
#define XHCI_AMD_PLL_FIX BIT_ULL(3)
#define XHCI_SPURIOUS_SUCCESS BIT_ULL(4)
/*
* Certain Intel host controllers have a limit to the number of endpoint
* contexts they can handle. Ideally, they would signal that they can't handle
* anymore endpoint contexts by returning a Resource Error for the Configure
* Endpoint command, but they don't. Instead they expect software to keep track
* of the number of active endpoints for them, across configure endpoint
* commands, reset device commands, disable slot commands, and address device
* commands.
*/
#define XHCI_EP_LIMIT_QUIRK BIT_ULL(5)
#define XHCI_BROKEN_MSI BIT_ULL(6)
#define XHCI_RESET_ON_RESUME BIT_ULL(7)
#define XHCI_SW_BW_CHECKING BIT_ULL(8)
#define XHCI_AMD_0x96_HOST BIT_ULL(9)
#define XHCI_TRUST_TX_LENGTH BIT_ULL(10)
#define XHCI_LPM_SUPPORT BIT_ULL(11)
#define XHCI_INTEL_HOST BIT_ULL(12)
#define XHCI_SPURIOUS_REBOOT BIT_ULL(13)
#define XHCI_COMP_MODE_QUIRK BIT_ULL(14)
#define XHCI_AVOID_BEI BIT_ULL(15)
#define XHCI_PLAT BIT_ULL(16)
#define XHCI_SLOW_SUSPEND BIT_ULL(17)
#define XHCI_SPURIOUS_WAKEUP BIT_ULL(18)
/* For controllers with a broken beyond repair streams implementation */
#define XHCI_BROKEN_STREAMS BIT_ULL(19)
#define XHCI_PME_STUCK_QUIRK BIT_ULL(20)
#define XHCI_MTK_HOST BIT_ULL(21)
#define XHCI_SSIC_PORT_UNUSED BIT_ULL(22)
#define XHCI_NO_64BIT_SUPPORT BIT_ULL(23)
#define XHCI_MISSING_CAS BIT_ULL(24)
/* For controller with a broken Port Disable implementation */
#define XHCI_BROKEN_PORT_PED BIT_ULL(25)
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 BIT_ULL(26)
#define XHCI_U2_DISABLE_WAKE BIT_ULL(27)
#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL BIT_ULL(28)
#define XHCI_HW_LPM_DISABLE BIT_ULL(29)
#define XHCI_SUSPEND_DELAY BIT_ULL(30)
#define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31)
#define XHCI_ZERO_64B_REGS BIT_ULL(32)
#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)
#define XHCI_SKIP_PHY_INIT BIT_ULL(37)
#define XHCI_DISABLE_SPARSE BIT_ULL(38)
#define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39)
#define XHCI_NO_SOFT_RETRY BIT_ULL(40)
#define XHCI_BROKEN_D3COLD BIT_ULL(41)
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
unsigned int num_active_eps;
unsigned int limit_active_eps;
struct xhci_port *hw_ports;
struct xhci_hub usb2_rhub;
struct xhci_hub usb3_rhub;
/* support xHCI 1.0 spec USB2 hardware LPM */
unsigned hw_lpm_support:1;
/* Broken Suspend flag for SNPS Suspend resume issue */
unsigned broken_suspend:1;
/* cached usb2 extened protocol capabilites */
u32 *ext_caps;
unsigned int num_ext_caps;
/* cached extended protocol port capabilities */
struct xhci_port_cap *port_caps;
unsigned int num_port_caps;
/* Compliance Mode Recovery Data */
struct timer_list comp_mode_recovery_timer;
u32 port_status_u0;
u16 test_mode;
/* Compliance Mode Timer Triggered every 2 seconds */
#define COMP_MODE_RCVRY_MSECS 2000
struct dentry *debugfs_root;
struct dentry *debugfs_slots;
struct list_head regset_list;
void *dbc;
/* platform-specific data -- must come last */
unsigned long priv[] __aligned(sizeof(s64));
};
/* Platform specific overrides to generic XHCI hc_driver ops */
struct xhci_driver_overrides {
size_t extra_priv_size;
int (*reset)(struct usb_hcd *hcd);
int (*start)(struct usb_hcd *hcd);
int (*add_endpoint)(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep);
int (*drop_endpoint)(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep);
int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
};
#define XHCI_CFC_DELAY 10
/* convert between an HCD pointer and the corresponding EHCI_HCD */
static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
{
struct usb_hcd *primary_hcd;
if (usb_hcd_is_primary_hcd(hcd))
primary_hcd = hcd;
else
primary_hcd = hcd->primary_hcd;
return (struct xhci_hcd *) (primary_hcd->hcd_priv);
}
static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
{
return xhci->main_hcd;
}
#define xhci_dbg(xhci, fmt, args...) \
dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
#define xhci_err(xhci, fmt, args...) \
dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
#define xhci_warn(xhci, fmt, args...) \
dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
#define xhci_warn_ratelimited(xhci, fmt, args...) \
dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
#define xhci_info(xhci, fmt, args...) \
dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
/*
* Registers should always be accessed with double word or quad word accesses.
*
* Some xHCI implementations may support 64-bit address pointers. Registers
* with 64-bit address pointers should be written to with dword accesses by
* writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
* xHCI implementations that do not support 64-bit address pointers will ignore
* the high dword, and write order is irrelevant.
*/
static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
__le64 __iomem *regs)
{
return lo_hi_readq(regs);
}
static inline void xhci_write_64(struct xhci_hcd *xhci,
const u64 val, __le64 __iomem *regs)
{
lo_hi_writeq(val, regs);
}
static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
{
return xhci->quirks & XHCI_LINK_TRB_QUIRK;
}
/* xHCI debugging */
char *xhci_get_slot_state(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx);
void xhci_dbg_trace(struct xhci_hcd *xhci, void (*trace)(struct va_format *),
const char *fmt, ...);
/* xHCI memory management */
void xhci_mem_cleanup(struct xhci_hcd *xhci);
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
struct usb_device *udev);
unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_address(unsigned int ep_index);
unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
int old_active_eps);
void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info);
void xhci_update_bw_info(struct xhci_hcd *xhci,
struct xhci_container_ctx *in_ctx,
struct xhci_input_control_ctx *ctrl_ctx,
struct xhci_virt_device *virt_dev);
void xhci_endpoint_copy(struct xhci_hcd *xhci,
struct xhci_container_ctx *in_ctx,
struct xhci_container_ctx *out_ctx,
unsigned int ep_index);
void xhci_slot_copy(struct xhci_hcd *xhci,
struct xhci_container_ctx *in_ctx,
struct xhci_container_ctx *out_ctx);
int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
struct usb_device *udev, struct usb_host_endpoint *ep,
gfp_t mem_flags);
struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
unsigned int num_segs, unsigned int cycle_state,
enum xhci_ring_type type, unsigned int max_packet, gfp_t flags);
void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
unsigned int num_trbs, gfp_t flags);
int xhci_alloc_erst(struct xhci_hcd *xhci,
struct xhci_ring *evt_ring,
struct xhci_erst *erst,
gfp_t flags);
void xhci_initialize_ring_info(struct xhci_ring *ring,
unsigned int cycle_state);
void xhci_free_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
void xhci_free_endpoint_ring(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
unsigned int ep_index);
struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
unsigned int num_stream_ctxs,
unsigned int num_streams,
unsigned int max_packet, gfp_t flags);
void xhci_free_stream_info(struct xhci_hcd *xhci,
struct xhci_stream_info *stream_info);
void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
struct xhci_ep_ctx *ep_ctx,
struct xhci_stream_info *stream_info);
void xhci_setup_no_streams_ep_input_ctx(struct xhci_ep_ctx *ep_ctx,
struct xhci_virt_ep *ep);
void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev, bool drop_control_ep);
struct xhci_ring *xhci_dma_to_transfer_ring(
struct xhci_virt_ep *ep,
u64 address);
struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
bool allocate_completion, gfp_t mem_flags);
struct xhci_command *xhci_alloc_command_with_ctx(struct xhci_hcd *xhci,
bool allocate_completion, gfp_t mem_flags);
void xhci_urb_free_priv(struct urb_priv *urb_priv);
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command);
struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
int type, gfp_t flags);
void xhci_free_container_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx);
/* xHCI host controller glue */
typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec);
void xhci_quiesce(struct xhci_hcd *xhci);
int xhci_halt(struct xhci_hcd *xhci);
int xhci_start(struct xhci_hcd *xhci);
int xhci_reset(struct xhci_hcd *xhci);
int xhci_run(struct usb_hcd *hcd);
int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
void xhci_shutdown(struct usb_hcd *hcd);
void xhci_init_driver(struct hc_driver *drv,
const struct xhci_driver_overrides *over);
int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep);
int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep);
int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);
int xhci_ext_cap_init(struct xhci_hcd *xhci);
int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup);
int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
irqreturn_t xhci_irq(struct usb_hcd *hcd);
irqreturn_t xhci_msi_irq(int irq, void *hcd);
int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
int xhci_alloc_tt_info(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags);
/* xHCI ring, segment, TRB, and TD functions */
dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
struct xhci_segment *start_seg, union xhci_trb *start_trb,
union xhci_trb *end_trb, dma_addr_t suspect_dma, bool debug);
int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
void xhci_ring_cmd_db(struct xhci_hcd *xhci);
int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd,
u32 trb_type, u32 slot_id);
int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev);
int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
u32 field1, u32 field2, u32 field3, u32 field4);
int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd,
int slot_id, unsigned int ep_index, int suspend);
int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
int slot_id, unsigned int ep_index);
int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
int slot_id, unsigned int ep_index);
int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
int slot_id, unsigned int ep_index);
int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index);
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci,
struct xhci_command *cmd, dma_addr_t in_ctx_ptr, u32 slot_id,
bool command_must_succeed);
int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd,
dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed);
int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
int slot_id, unsigned int ep_index,
enum xhci_ep_reset_type reset_type);
int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
u32 slot_id);
void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
unsigned int ep_index, unsigned int stream_id,
struct xhci_td *td);
void xhci_stop_endpoint_command_watchdog(struct timer_list *t);
void xhci_handle_command_timeout(struct work_struct *work);
void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
unsigned int ep_index, unsigned int stream_id);
void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
unsigned int slot_id,
unsigned int ep_index);
void xhci_cleanup_command_queue(struct xhci_hcd *xhci);
void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring);
unsigned int count_trbs(u64 addr, u64 len);
/* xHCI roothub code */
void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
u32 link_state);
void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port,
u32 port_bit);
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
void xhci_hc_died(struct xhci_hcd *xhci);
#ifdef CONFIG_PM
int xhci_bus_suspend(struct usb_hcd *hcd);
int xhci_bus_resume(struct usb_hcd *hcd);
unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd);
#else
#define xhci_bus_suspend NULL
#define xhci_bus_resume NULL
#define xhci_get_resuming_ports NULL
#endif /* CONFIG_PM */
u32 xhci_port_state_to_neutral(u32 state);
int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
u16 port);
void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
/* xHCI contexts */
struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx);
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
unsigned int stream_id);
static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
struct urb *urb)
{
return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
xhci_get_endpoint_index(&urb->ep->desc),
urb->stream_id);
}
/*
* TODO: As per spec Isochronous IDT transmissions are supported. We bypass
* them anyways as we where unable to find a device that matches the
* constraints.
*/
static inline bool xhci_urb_suitable_for_idt(struct urb *urb)
{
if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) &&
usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE &&
urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE &&
!(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) &&
!urb->num_sgs)
return true;
return false;
}
static inline char *xhci_slot_state_string(u32 state)
{
switch (state) {
case SLOT_STATE_ENABLED:
return "enabled/disabled";
case SLOT_STATE_DEFAULT:
return "default";
case SLOT_STATE_ADDRESSED:
return "addressed";
case SLOT_STATE_CONFIGURED:
return "configured";
default:
return "reserved";
}
}
static inline const char *xhci_decode_trb(char *str, size_t size,
u32 field0, u32 field1, u32 field2, u32 field3)
{
int type = TRB_FIELD_TO_TYPE(field3);
switch (type) {
case TRB_LINK:
snprintf(str, size,
"LINK %08x%08x intr %d type '%s' flags %c:%c:%c:%c",
field1, field0, GET_INTR_TARGET(field2),
xhci_trb_type_string(type),
field3 & TRB_IOC ? 'I' : 'i',
field3 & TRB_CHAIN ? 'C' : 'c',
field3 & TRB_TC ? 'T' : 't',
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_TRANSFER:
case TRB_COMPLETION:
case TRB_PORT_STATUS:
case TRB_BANDWIDTH_EVENT:
case TRB_DOORBELL:
case TRB_HC_EVENT:
case TRB_DEV_NOTE:
case TRB_MFINDEX_WRAP:
snprintf(str, size,
"TRB %08x%08x status '%s' len %d slot %d ep %d type '%s' flags %c:%c",
field1, field0,
xhci_trb_comp_code_string(GET_COMP_CODE(field2)),
EVENT_TRB_LEN(field2), TRB_TO_SLOT_ID(field3),
/* Macro decrements 1, maybe it shouldn't?!? */
TRB_TO_EP_INDEX(field3) + 1,
xhci_trb_type_string(type),
field3 & EVENT_DATA ? 'E' : 'e',
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_SETUP:
snprintf(str, size,
"bRequestType %02x bRequest %02x wValue %02x%02x wIndex %02x%02x wLength %d length %d TD size %d intr %d type '%s' flags %c:%c:%c",
field0 & 0xff,
(field0 & 0xff00) >> 8,
(field0 & 0xff000000) >> 24,
(field0 & 0xff0000) >> 16,
(field1 & 0xff00) >> 8,
field1 & 0xff,
(field1 & 0xff000000) >> 16 |
(field1 & 0xff0000) >> 16,
TRB_LEN(field2), GET_TD_SIZE(field2),
GET_INTR_TARGET(field2),
xhci_trb_type_string(type),
field3 & TRB_IDT ? 'I' : 'i',
field3 & TRB_IOC ? 'I' : 'i',
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_DATA:
snprintf(str, size,
"Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c",
field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
GET_INTR_TARGET(field2),
xhci_trb_type_string(type),
field3 & TRB_IDT ? 'I' : 'i',
field3 & TRB_IOC ? 'I' : 'i',
field3 & TRB_CHAIN ? 'C' : 'c',
field3 & TRB_NO_SNOOP ? 'S' : 's',
field3 & TRB_ISP ? 'I' : 'i',
field3 & TRB_ENT ? 'E' : 'e',
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_STATUS:
snprintf(str, size,
"Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c",
field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
GET_INTR_TARGET(field2),
xhci_trb_type_string(type),
field3 & TRB_IOC ? 'I' : 'i',
field3 & TRB_CHAIN ? 'C' : 'c',
field3 & TRB_ENT ? 'E' : 'e',
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_NORMAL:
case TRB_ISOC:
case TRB_EVENT_DATA:
case TRB_TR_NOOP:
snprintf(str, size,
"Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c:%c",
field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
GET_INTR_TARGET(field2),
xhci_trb_type_string(type),
field3 & TRB_BEI ? 'B' : 'b',
field3 & TRB_IDT ? 'I' : 'i',
field3 & TRB_IOC ? 'I' : 'i',
field3 & TRB_CHAIN ? 'C' : 'c',
field3 & TRB_NO_SNOOP ? 'S' : 's',
field3 & TRB_ISP ? 'I' : 'i',
field3 & TRB_ENT ? 'E' : 'e',
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_CMD_NOOP:
case TRB_ENABLE_SLOT:
snprintf(str, size,
"%s: flags %c",
xhci_trb_type_string(type),
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_DISABLE_SLOT:
case TRB_NEG_BANDWIDTH:
snprintf(str, size,
"%s: slot %d flags %c",
xhci_trb_type_string(type),
TRB_TO_SLOT_ID(field3),
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_ADDR_DEV:
snprintf(str, size,
"%s: ctx %08x%08x slot %d flags %c:%c",
xhci_trb_type_string(type),
field1, field0,
TRB_TO_SLOT_ID(field3),
field3 & TRB_BSR ? 'B' : 'b',
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_CONFIG_EP:
snprintf(str, size,
"%s: ctx %08x%08x slot %d flags %c:%c",
xhci_trb_type_string(type),
field1, field0,
TRB_TO_SLOT_ID(field3),
field3 & TRB_DC ? 'D' : 'd',
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_EVAL_CONTEXT:
snprintf(str, size,
"%s: ctx %08x%08x slot %d flags %c",
xhci_trb_type_string(type),
field1, field0,
TRB_TO_SLOT_ID(field3),
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_RESET_EP:
snprintf(str, size,
"%s: ctx %08x%08x slot %d ep %d flags %c:%c",
xhci_trb_type_string(type),
field1, field0,
TRB_TO_SLOT_ID(field3),
/* Macro decrements 1, maybe it shouldn't?!? */
TRB_TO_EP_INDEX(field3) + 1,
field3 & TRB_TSP ? 'T' : 't',
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_STOP_RING:
sprintf(str,
"%s: slot %d sp %d ep %d flags %c",
xhci_trb_type_string(type),
TRB_TO_SLOT_ID(field3),
TRB_TO_SUSPEND_PORT(field3),
/* Macro decrements 1, maybe it shouldn't?!? */
TRB_TO_EP_INDEX(field3) + 1,
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_SET_DEQ:
snprintf(str, size,
"%s: deq %08x%08x stream %d slot %d ep %d flags %c",
xhci_trb_type_string(type),
field1, field0,
TRB_TO_STREAM_ID(field2),
TRB_TO_SLOT_ID(field3),
/* Macro decrements 1, maybe it shouldn't?!? */
TRB_TO_EP_INDEX(field3) + 1,
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_RESET_DEV:
snprintf(str, size,
"%s: slot %d flags %c",
xhci_trb_type_string(type),
TRB_TO_SLOT_ID(field3),
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_FORCE_EVENT:
snprintf(str, size,
"%s: event %08x%08x vf intr %d vf id %d flags %c",
xhci_trb_type_string(type),
field1, field0,
TRB_TO_VF_INTR_TARGET(field2),
TRB_TO_VF_ID(field3),
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_SET_LT:
snprintf(str, size,
"%s: belt %d flags %c",
xhci_trb_type_string(type),
TRB_TO_BELT(field3),
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_GET_BW:
snprintf(str, size,
"%s: ctx %08x%08x slot %d speed %d flags %c",
xhci_trb_type_string(type),
field1, field0,
TRB_TO_SLOT_ID(field3),
TRB_TO_DEV_SPEED(field3),
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_FORCE_HEADER:
snprintf(str, size,
"%s: info %08x%08x%08x pkt type %d roothub port %d flags %c",
xhci_trb_type_string(type),
field2, field1, field0 & 0xffffffe0,
TRB_TO_PACKET_TYPE(field0),
TRB_TO_ROOTHUB_PORT(field3),
field3 & TRB_CYCLE ? 'C' : 'c');
break;
default:
snprintf(str, size,
"type '%s' -> raw %08x %08x %08x %08x",
xhci_trb_type_string(type),
field0, field1, field2, field3);
}
return str;
}
static inline const char *xhci_decode_ctrl_ctx(char *str,
unsigned long drop, unsigned long add)
{
unsigned int bit;
int ret = 0;
if (drop) {
ret = sprintf(str, "Drop:");
for_each_set_bit(bit, &drop, 32)
ret += sprintf(str + ret, " %d%s",
bit / 2,
bit % 2 ? "in":"out");
ret += sprintf(str + ret, ", ");
}
if (add) {
ret += sprintf(str + ret, "Add:%s%s",
(add & SLOT_FLAG) ? " slot":"",
(add & EP0_FLAG) ? " ep0":"");
add &= ~(SLOT_FLAG | EP0_FLAG);
for_each_set_bit(bit, &add, 32)
ret += sprintf(str + ret, " %d%s",
bit / 2,
bit % 2 ? "in":"out");
}
return str;
}
static inline const char *xhci_decode_slot_context(char *str,
u32 info, u32 info2, u32 tt_info, u32 state)
{
u32 speed;
u32 hub;
u32 mtt;
int ret = 0;
speed = info & DEV_SPEED;
hub = info & DEV_HUB;
mtt = info & DEV_MTT;
ret = sprintf(str, "RS %05x %s%s%s Ctx Entries %d MEL %d us Port# %d/%d",
info & ROUTE_STRING_MASK,
({ char *s;
switch (speed) {
case SLOT_SPEED_FS:
s = "full-speed";
break;
case SLOT_SPEED_LS:
s = "low-speed";
break;
case SLOT_SPEED_HS:
s = "high-speed";
break;
case SLOT_SPEED_SS:
s = "super-speed";
break;
case SLOT_SPEED_SSP:
s = "super-speed plus";
break;
default:
s = "UNKNOWN speed";
} s; }),
mtt ? " multi-TT" : "",
hub ? " Hub" : "",
(info & LAST_CTX_MASK) >> 27,
info2 & MAX_EXIT,
DEVINFO_TO_ROOT_HUB_PORT(info2),
DEVINFO_TO_MAX_PORTS(info2));
ret += sprintf(str + ret, " [TT Slot %d Port# %d TTT %d Intr %d] Addr %d State %s",
tt_info & TT_SLOT, (tt_info & TT_PORT) >> 8,
GET_TT_THINK_TIME(tt_info), GET_INTR_TARGET(tt_info),
state & DEV_ADDR_MASK,
xhci_slot_state_string(GET_SLOT_STATE(state)));
return str;
}
static inline const char *xhci_portsc_link_state_string(u32 portsc)
{
switch (portsc & PORT_PLS_MASK) {
case XDEV_U0:
return "U0";
case XDEV_U1:
return "U1";
case XDEV_U2:
return "U2";
case XDEV_U3:
return "U3";
case XDEV_DISABLED:
return "Disabled";
case XDEV_RXDETECT:
return "RxDetect";
case XDEV_INACTIVE:
return "Inactive";
case XDEV_POLLING:
return "Polling";
case XDEV_RECOVERY:
return "Recovery";
case XDEV_HOT_RESET:
return "Hot Reset";
case XDEV_COMP_MODE:
return "Compliance mode";
case XDEV_TEST_MODE:
return "Test mode";
case XDEV_RESUME:
return "Resume";
default:
break;
}
return "Unknown";
}
static inline const char *xhci_decode_portsc(char *str, u32 portsc)
{
int ret;
ret = sprintf(str, "%s %s %s Link:%s PortSpeed:%d ",
portsc & PORT_POWER ? "Powered" : "Powered-off",
portsc & PORT_CONNECT ? "Connected" : "Not-connected",
portsc & PORT_PE ? "Enabled" : "Disabled",
xhci_portsc_link_state_string(portsc),
DEV_PORT_SPEED(portsc));
if (portsc & PORT_OC)
ret += sprintf(str + ret, "OverCurrent ");
if (portsc & PORT_RESET)
ret += sprintf(str + ret, "In-Reset ");
ret += sprintf(str + ret, "Change: ");
if (portsc & PORT_CSC)
ret += sprintf(str + ret, "CSC ");
if (portsc & PORT_PEC)
ret += sprintf(str + ret, "PEC ");
if (portsc & PORT_WRC)
ret += sprintf(str + ret, "WRC ");
if (portsc & PORT_OCC)
ret += sprintf(str + ret, "OCC ");
if (portsc & PORT_RC)
ret += sprintf(str + ret, "PRC ");
if (portsc & PORT_PLC)
ret += sprintf(str + ret, "PLC ");
if (portsc & PORT_CEC)
ret += sprintf(str + ret, "CEC ");
if (portsc & PORT_CAS)
ret += sprintf(str + ret, "CAS ");
ret += sprintf(str + ret, "Wake: ");
if (portsc & PORT_WKCONN_E)
ret += sprintf(str + ret, "WCE ");
if (portsc & PORT_WKDISC_E)
ret += sprintf(str + ret, "WDE ");
if (portsc & PORT_WKOC_E)
ret += sprintf(str + ret, "WOE ");
return str;
}
static inline const char *xhci_decode_usbsts(char *str, u32 usbsts)
{
int ret = 0;
if (usbsts == ~(u32)0)
return " 0xffffffff";
if (usbsts & STS_HALT)
ret += sprintf(str + ret, " HCHalted");
if (usbsts & STS_FATAL)
ret += sprintf(str + ret, " HSE");
if (usbsts & STS_EINT)
ret += sprintf(str + ret, " EINT");
if (usbsts & STS_PORT)
ret += sprintf(str + ret, " PCD");
if (usbsts & STS_SAVE)
ret += sprintf(str + ret, " SSS");
if (usbsts & STS_RESTORE)
ret += sprintf(str + ret, " RSS");
if (usbsts & STS_SRE)
ret += sprintf(str + ret, " SRE");
if (usbsts & STS_CNR)
ret += sprintf(str + ret, " CNR");
if (usbsts & STS_HCE)
ret += sprintf(str + ret, " HCE");
return str;
}
static inline const char *xhci_decode_doorbell(char *str, u32 slot, u32 doorbell)
{
u8 ep;
u16 stream;
int ret;
ep = (doorbell & 0xff);
stream = doorbell >> 16;
if (slot == 0) {
sprintf(str, "Command Ring %d", doorbell);
return str;
}
ret = sprintf(str, "Slot %d ", slot);
if (ep > 0 && ep < 32)
ret = sprintf(str + ret, "ep%d%s",
ep / 2,
ep % 2 ? "in" : "out");
else if (ep == 0 || ep < 248)
ret = sprintf(str + ret, "Reserved %d", ep);
else
ret = sprintf(str + ret, "Vendor Defined %d", ep);
if (stream)
ret = sprintf(str + ret, " Stream %d", stream);
return str;
}
static inline const char *xhci_ep_state_string(u8 state)
{
switch (state) {
case EP_STATE_DISABLED:
return "disabled";
case EP_STATE_RUNNING:
return "running";
case EP_STATE_HALTED:
return "halted";
case EP_STATE_STOPPED:
return "stopped";
case EP_STATE_ERROR:
return "error";
default:
return "INVALID";
}
}
static inline const char *xhci_ep_type_string(u8 type)
{
switch (type) {
case ISOC_OUT_EP:
return "Isoc OUT";
case BULK_OUT_EP:
return "Bulk OUT";
case INT_OUT_EP:
return "Int OUT";
case CTRL_EP:
return "Ctrl";
case ISOC_IN_EP:
return "Isoc IN";
case BULK_IN_EP:
return "Bulk IN";
case INT_IN_EP:
return "Int IN";
default:
return "INVALID";
}
}
static inline const char *xhci_decode_ep_context(char *str, u32 info,
u32 info2, u64 deq, u32 tx_info)
{
int ret;
u32 esit;
u16 maxp;
u16 avg;
u8 max_pstr;
u8 ep_state;
u8 interval;
u8 ep_type;
u8 burst;
u8 cerr;
u8 mult;
bool lsa;
bool hid;
esit = CTX_TO_MAX_ESIT_PAYLOAD_HI(info) << 16 |
CTX_TO_MAX_ESIT_PAYLOAD(tx_info);
ep_state = info & EP_STATE_MASK;
max_pstr = CTX_TO_EP_MAXPSTREAMS(info);
interval = CTX_TO_EP_INTERVAL(info);
mult = CTX_TO_EP_MULT(info) + 1;
lsa = !!(info & EP_HAS_LSA);
cerr = (info2 & (3 << 1)) >> 1;
ep_type = CTX_TO_EP_TYPE(info2);
hid = !!(info2 & (1 << 7));
burst = CTX_TO_MAX_BURST(info2);
maxp = MAX_PACKET_DECODED(info2);
avg = EP_AVG_TRB_LENGTH(tx_info);
ret = sprintf(str, "State %s mult %d max P. Streams %d %s",
xhci_ep_state_string(ep_state), mult,
max_pstr, lsa ? "LSA " : "");
ret += sprintf(str + ret, "interval %d us max ESIT payload %d CErr %d ",
(1 << interval) * 125, esit, cerr);
ret += sprintf(str + ret, "Type %s %sburst %d maxp %d deq %016llx ",
xhci_ep_type_string(ep_type), hid ? "HID" : "",
burst, maxp, deq);
ret += sprintf(str + ret, "avg trb len %d", avg);
return str;
}
#endif /* __LINUX_XHCI_HCD_H */
Reference in New Issue View Git Blame Copy Permalink