linux/drivers/acpi/blacklist.c
Rafael J. Wysocki 18d78b64fd ACPI / init: Make it possible to override _REV
The platform firmware on some systems expects Linux to return "5" as
the supported ACPI revision which makes it expose system configuration
information in a special way.

For example, based on what ACPI exports as the supported revision,
Dell XPS 13 (2015) configures its audio device to either work in HDA
mode or in I2S mode, where the former is supposed to be used on Linux
until the latter is fully supported (in the kernel as well as in user
space).

Since ACPI 6 mandates that _REV should return "2" if ACPI 2 or later
is supported by the OS, a subsequent change will make that happen, so
make it possible to override that on systems where "5" is expected to
be returned for Linux to work correctly one them (such as the Dell
machine mentioned above).

Original-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-03 01:06:00 +02:00

358 lines
9.5 KiB
C

/*
* blacklist.c
*
* Check to see if the given machine has a known bad ACPI BIOS
* or if the BIOS is too old.
* Check given machine against acpi_osi_dmi_table[].
*
* Copyright (C) 2004 Len Brown <len.brown@intel.com>
* Copyright (C) 2002 Andy Grover <andrew.grover@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
#include "internal.h"
enum acpi_blacklist_predicates {
all_versions,
less_than_or_equal,
equal,
greater_than_or_equal,
};
struct acpi_blacklist_item {
char oem_id[7];
char oem_table_id[9];
u32 oem_revision;
char *table;
enum acpi_blacklist_predicates oem_revision_predicate;
char *reason;
u32 is_critical_error;
};
static struct dmi_system_id acpi_osi_dmi_table[] __initdata;
/*
* POLICY: If *anything* doesn't work, put it on the blacklist.
* If they are critical errors, mark it critical, and abort driver load.
*/
static struct acpi_blacklist_item acpi_blacklist[] __initdata = {
/* Compaq Presario 1700 */
{"PTLTD ", " DSDT ", 0x06040000, ACPI_SIG_DSDT, less_than_or_equal,
"Multiple problems", 1},
/* Sony FX120, FX140, FX150? */
{"SONY ", "U0 ", 0x20010313, ACPI_SIG_DSDT, less_than_or_equal,
"ACPI driver problem", 1},
/* Compaq Presario 800, Insyde BIOS */
{"INT440", "SYSFexxx", 0x00001001, ACPI_SIG_DSDT, less_than_or_equal,
"Does not use _REG to protect EC OpRegions", 1},
/* IBM 600E - _ADR should return 7, but it returns 1 */
{"IBM ", "TP600E ", 0x00000105, ACPI_SIG_DSDT, less_than_or_equal,
"Incorrect _ADR", 1},
{""}
};
int __init acpi_blacklisted(void)
{
int i = 0;
int blacklisted = 0;
struct acpi_table_header table_header;
while (acpi_blacklist[i].oem_id[0] != '\0') {
if (acpi_get_table_header(acpi_blacklist[i].table, 0, &table_header)) {
i++;
continue;
}
if (strncmp(acpi_blacklist[i].oem_id, table_header.oem_id, 6)) {
i++;
continue;
}
if (strncmp
(acpi_blacklist[i].oem_table_id, table_header.oem_table_id,
8)) {
i++;
continue;
}
if ((acpi_blacklist[i].oem_revision_predicate == all_versions)
|| (acpi_blacklist[i].oem_revision_predicate ==
less_than_or_equal
&& table_header.oem_revision <=
acpi_blacklist[i].oem_revision)
|| (acpi_blacklist[i].oem_revision_predicate ==
greater_than_or_equal
&& table_header.oem_revision >=
acpi_blacklist[i].oem_revision)
|| (acpi_blacklist[i].oem_revision_predicate == equal
&& table_header.oem_revision ==
acpi_blacklist[i].oem_revision)) {
printk(KERN_ERR PREFIX
"Vendor \"%6.6s\" System \"%8.8s\" "
"Revision 0x%x has a known ACPI BIOS problem.\n",
acpi_blacklist[i].oem_id,
acpi_blacklist[i].oem_table_id,
acpi_blacklist[i].oem_revision);
printk(KERN_ERR PREFIX
"Reason: %s. This is a %s error\n",
acpi_blacklist[i].reason,
(acpi_blacklist[i].
is_critical_error ? "non-recoverable" :
"recoverable"));
blacklisted = acpi_blacklist[i].is_critical_error;
break;
} else {
i++;
}
}
dmi_check_system(acpi_osi_dmi_table);
return blacklisted;
}
#ifdef CONFIG_DMI
static int __init dmi_enable_osi_linux(const struct dmi_system_id *d)
{
acpi_dmi_osi_linux(1, d); /* enable */
return 0;
}
static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
acpi_osi_setup("!Windows 2006");
acpi_osi_setup("!Windows 2006 SP1");
acpi_osi_setup("!Windows 2006 SP2");
return 0;
}
static int __init dmi_disable_osi_win7(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
acpi_osi_setup("!Windows 2009");
return 0;
}
static int __init dmi_disable_osi_win8(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
acpi_osi_setup("!Windows 2012");
return 0;
}
#ifdef CONFIG_ACPI_REV_OVERRIDE_POSSIBLE
static int __init dmi_enable_rev_override(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s (force ACPI _REV to 5)\n",
d->ident);
acpi_rev_override_setup(NULL);
return 0;
}
#endif
static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
{
.callback = dmi_disable_osi_vista,
.ident = "Fujitsu Siemens",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
{
/*
* There have a NVIF method in MSI GX723 DSDT need call by Nvidia
* driver (e.g. nouveau) when user press brightness hotkey.
* Currently, nouveau driver didn't do the job and it causes there
* have a infinite while loop in DSDT when user press hotkey.
* We add MSI GX723's dmi information to this table for workaround
* this issue.
* Will remove MSI GX723 from the table after nouveau grows support.
*/
.callback = dmi_disable_osi_vista,
.ident = "MSI GX723",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
DMI_MATCH(DMI_PRODUCT_NAME, "GX723"),
},
},
{
.callback = dmi_disable_osi_vista,
.ident = "Sony VGN-NS10J_S",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS10J_S"),
},
},
{
.callback = dmi_disable_osi_vista,
.ident = "Sony VGN-SR290J",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR290J"),
},
},
{
.callback = dmi_disable_osi_vista,
.ident = "VGN-NS50B_L",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS50B_L"),
},
},
{
.callback = dmi_disable_osi_vista,
.ident = "VGN-SR19XN",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR19XN"),
},
},
{
.callback = dmi_disable_osi_vista,
.ident = "Toshiba Satellite L355",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Satellite L355"),
},
},
{
.callback = dmi_disable_osi_win7,
.ident = "ASUS K50IJ",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "K50IJ"),
},
},
{
.callback = dmi_disable_osi_vista,
.ident = "Toshiba P305D",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P305D"),
},
},
{
.callback = dmi_disable_osi_vista,
.ident = "Toshiba NB100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "NB100"),
},
},
/*
* The wireless hotkey does not work on those machines when
* returning true for _OSI("Windows 2012")
*/
{
.callback = dmi_disable_osi_win8,
.ident = "Dell Inspiron 7737",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7737"),
},
},
{
.callback = dmi_disable_osi_win8,
.ident = "Dell Inspiron 7537",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7537"),
},
},
{
.callback = dmi_disable_osi_win8,
.ident = "Dell Inspiron 5437",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5437"),
},
},
{
.callback = dmi_disable_osi_win8,
.ident = "Dell Inspiron 3437",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 3437"),
},
},
{
.callback = dmi_disable_osi_win8,
.ident = "Dell Vostro 3446",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3446"),
},
},
{
.callback = dmi_disable_osi_win8,
.ident = "Dell Vostro 3546",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3546"),
},
},
/*
* BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
* Linux ignores it, except for the machines enumerated below.
*/
/*
* Without this this EEEpc exports a non working WMI interface, with
* this it exports a working "good old" eeepc_laptop interface, fixing
* both brightness control, and rfkill not working.
*/
{
.callback = dmi_enable_osi_linux,
.ident = "Asus EEE PC 1015PX",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "1015PX"),
},
},
#ifdef CONFIG_ACPI_REV_OVERRIDE_POSSIBLE
/*
* DELL XPS 13 (2015) switches sound between HDA and I2S
* depending on the ACPI _REV callback. If userspace supports
* I2S sufficiently (or if you do not care about sound), you
* can safely disable this quirk.
*/
{
.callback = dmi_enable_rev_override,
.ident = "DELL XPS 13 (2015)",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9343"),
},
},
#endif
{}
};
#endif /* CONFIG_DMI */