mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 09:02:00 +00:00
4db90a1452
* Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide what to do with transfer modes < XFER_PIO_0 in ide_set_xfer_rate(). * Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old, serverworks, tc86c001 and via82cxxx) and cleanup ->set_dma_mode methods in host drivers that don't (IDE core code guarantees that ->set_dma_mode will be called only for modes which are present in SWDMA/MWDMA/UDMA masks). While at it: * Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in hpt34x/hpt366/pdc202xx_old/serverworks host driver. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
386 lines
12 KiB
C
386 lines
12 KiB
C
/*
|
|
* Version 2.24
|
|
*
|
|
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
|
|
* IDE driver for Linux.
|
|
*
|
|
* Copyright (c) 2000-2002 Vojtech Pavlik
|
|
* Copyright (c) 2007 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* Based on the work of:
|
|
* Andre Hedrick
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ide.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "ide-timing.h"
|
|
|
|
#define AMD_IDE_CONFIG (0x01 + amd_config->base)
|
|
#define AMD_CABLE_DETECT (0x02 + amd_config->base)
|
|
#define AMD_DRIVE_TIMING (0x08 + amd_config->base)
|
|
#define AMD_8BIT_TIMING (0x0e + amd_config->base)
|
|
#define AMD_ADDRESS_SETUP (0x0c + amd_config->base)
|
|
#define AMD_UDMA_TIMING (0x10 + amd_config->base)
|
|
|
|
#define AMD_CHECK_SWDMA 0x08
|
|
#define AMD_BAD_SWDMA 0x10
|
|
#define AMD_BAD_FIFO 0x20
|
|
#define AMD_CHECK_SERENADE 0x40
|
|
|
|
/*
|
|
* AMD SouthBridge chips.
|
|
*/
|
|
|
|
static struct amd_ide_chip {
|
|
unsigned short id;
|
|
u8 base;
|
|
u8 udma_mask;
|
|
u8 flags;
|
|
} amd_ide_chips[] = {
|
|
{ PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, ATA_UDMA2, AMD_BAD_SWDMA },
|
|
{ PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, ATA_UDMA4, AMD_CHECK_SWDMA },
|
|
{ PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, ATA_UDMA5, AMD_BAD_FIFO },
|
|
{ PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, ATA_UDMA5, },
|
|
{ PCI_DEVICE_ID_AMD_8111_IDE, 0x40, ATA_UDMA6, AMD_CHECK_SERENADE },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, ATA_UDMA5, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, ATA_UDMA6, },
|
|
{ PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, ATA_UDMA5, },
|
|
{ 0 }
|
|
};
|
|
|
|
static struct amd_ide_chip *amd_config;
|
|
static const struct ide_port_info *amd_chipset;
|
|
static unsigned int amd_80w;
|
|
static unsigned int amd_clock;
|
|
|
|
static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
|
|
static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
|
|
|
|
/*
|
|
* amd_set_speed() writes timing values to the chipset registers
|
|
*/
|
|
|
|
static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timing *timing)
|
|
{
|
|
unsigned char t;
|
|
|
|
pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t);
|
|
t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
|
|
pci_write_config_byte(dev, AMD_ADDRESS_SETUP, t);
|
|
|
|
pci_write_config_byte(dev, AMD_8BIT_TIMING + (1 - (dn >> 1)),
|
|
((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1));
|
|
|
|
pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn),
|
|
((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
|
|
|
|
switch (amd_config->udma_mask) {
|
|
case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
|
|
case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
|
|
case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
|
|
case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break;
|
|
default: return;
|
|
}
|
|
|
|
pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t);
|
|
}
|
|
|
|
/*
|
|
* amd_set_drive() computes timing values and configures the chipset
|
|
* to a desired transfer mode. It also can be called by upper layers.
|
|
*/
|
|
|
|
static void amd_set_drive(ide_drive_t *drive, const u8 speed)
|
|
{
|
|
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
|
|
struct ide_timing t, p;
|
|
int T, UT;
|
|
|
|
T = 1000000000 / amd_clock;
|
|
UT = (amd_config->udma_mask == ATA_UDMA2) ? T : (T / 2);
|
|
|
|
ide_timing_compute(drive, speed, &t, T, UT);
|
|
|
|
if (peer->present) {
|
|
ide_timing_compute(peer, peer->current_speed, &p, T, UT);
|
|
ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
|
|
}
|
|
|
|
if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
|
|
if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
|
|
|
|
amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
|
|
}
|
|
|
|
/*
|
|
* amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
|
|
*/
|
|
|
|
static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
|
|
{
|
|
amd_set_drive(drive, XFER_PIO_0 + pio);
|
|
}
|
|
|
|
/*
|
|
* The initialization callback. Here we determine the IDE chip type
|
|
* and initialize its drive independent registers.
|
|
*/
|
|
|
|
static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const char *name)
|
|
{
|
|
unsigned char t;
|
|
unsigned int u;
|
|
int i;
|
|
|
|
/*
|
|
* Check for bad SWDMA.
|
|
*/
|
|
|
|
if (amd_config->flags & AMD_CHECK_SWDMA) {
|
|
if (dev->revision <= 7)
|
|
amd_config->flags |= AMD_BAD_SWDMA;
|
|
}
|
|
|
|
/*
|
|
* Check 80-wire cable presence.
|
|
*/
|
|
|
|
switch (amd_config->udma_mask) {
|
|
|
|
case ATA_UDMA6:
|
|
case ATA_UDMA5:
|
|
pci_read_config_byte(dev, AMD_CABLE_DETECT, &t);
|
|
pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
|
|
amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
|
|
for (i = 24; i >= 0; i -= 8)
|
|
if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
|
|
printk(KERN_WARNING "%s: BIOS didn't set cable bits correctly. Enabling workaround.\n",
|
|
amd_chipset->name);
|
|
amd_80w |= (1 << (1 - (i >> 4)));
|
|
}
|
|
break;
|
|
|
|
case ATA_UDMA4:
|
|
/* no host side cable detection */
|
|
amd_80w = 0x03;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Take care of prefetch & postwrite.
|
|
*/
|
|
|
|
pci_read_config_byte(dev, AMD_IDE_CONFIG, &t);
|
|
pci_write_config_byte(dev, AMD_IDE_CONFIG,
|
|
(amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0));
|
|
|
|
/*
|
|
* Take care of incorrectly wired Serenade mainboards.
|
|
*/
|
|
|
|
if ((amd_config->flags & AMD_CHECK_SERENADE) &&
|
|
dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
|
|
dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
|
|
amd_config->udma_mask = ATA_UDMA5;
|
|
|
|
/*
|
|
* Determine the system bus clock.
|
|
*/
|
|
|
|
amd_clock = system_bus_clock() * 1000;
|
|
|
|
switch (amd_clock) {
|
|
case 33000: amd_clock = 33333; break;
|
|
case 37000: amd_clock = 37500; break;
|
|
case 41000: amd_clock = 41666; break;
|
|
}
|
|
|
|
if (amd_clock < 20000 || amd_clock > 50000) {
|
|
printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n",
|
|
amd_chipset->name, amd_clock);
|
|
amd_clock = 33333;
|
|
}
|
|
|
|
/*
|
|
* Print the boot message.
|
|
*/
|
|
|
|
printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
|
|
amd_chipset->name, pci_name(dev), dev->revision,
|
|
amd_dma[fls(amd_config->udma_mask) - 1]);
|
|
|
|
return dev->irq;
|
|
}
|
|
|
|
static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
|
|
{
|
|
if (hwif->irq == 0) /* 0 is bogus but will do for now */
|
|
hwif->irq = pci_get_legacy_ide_irq(hwif->pci_dev, hwif->channel);
|
|
|
|
hwif->set_pio_mode = &amd_set_pio_mode;
|
|
hwif->set_dma_mode = &amd_set_drive;
|
|
|
|
if (!hwif->dma_base)
|
|
return;
|
|
|
|
hwif->ultra_mask = amd_config->udma_mask;
|
|
if (amd_config->flags & AMD_BAD_SWDMA)
|
|
hwif->swdma_mask = 0x00;
|
|
|
|
if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
|
|
if ((amd_80w >> hwif->channel) & 1)
|
|
hwif->cbl = ATA_CBL_PATA80;
|
|
else
|
|
hwif->cbl = ATA_CBL_PATA40;
|
|
}
|
|
}
|
|
|
|
#define IDE_HFLAGS_AMD \
|
|
(IDE_HFLAG_PIO_NO_BLACKLIST | \
|
|
IDE_HFLAG_PIO_NO_DOWNGRADE | \
|
|
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
|
|
IDE_HFLAG_POST_SET_MODE | \
|
|
IDE_HFLAG_IO_32BIT | \
|
|
IDE_HFLAG_UNMASK_IRQS | \
|
|
IDE_HFLAG_BOOTABLE)
|
|
|
|
#define DECLARE_AMD_DEV(name_str) \
|
|
{ \
|
|
.name = name_str, \
|
|
.init_chipset = init_chipset_amd74xx, \
|
|
.init_hwif = init_hwif_amd74xx, \
|
|
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
|
|
.host_flags = IDE_HFLAGS_AMD, \
|
|
.pio_mask = ATA_PIO5, \
|
|
.swdma_mask = ATA_SWDMA2, \
|
|
.mwdma_mask = ATA_MWDMA2, \
|
|
}
|
|
|
|
#define DECLARE_NV_DEV(name_str) \
|
|
{ \
|
|
.name = name_str, \
|
|
.init_chipset = init_chipset_amd74xx, \
|
|
.init_hwif = init_hwif_amd74xx, \
|
|
.enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
|
|
.host_flags = IDE_HFLAGS_AMD, \
|
|
.pio_mask = ATA_PIO5, \
|
|
.swdma_mask = ATA_SWDMA2, \
|
|
.mwdma_mask = ATA_MWDMA2, \
|
|
}
|
|
|
|
static const struct ide_port_info amd74xx_chipsets[] __devinitdata = {
|
|
/* 0 */ DECLARE_AMD_DEV("AMD7401"),
|
|
/* 1 */ DECLARE_AMD_DEV("AMD7409"),
|
|
/* 2 */ DECLARE_AMD_DEV("AMD7411"),
|
|
/* 3 */ DECLARE_AMD_DEV("AMD7441"),
|
|
/* 4 */ DECLARE_AMD_DEV("AMD8111"),
|
|
|
|
/* 5 */ DECLARE_NV_DEV("NFORCE"),
|
|
/* 6 */ DECLARE_NV_DEV("NFORCE2"),
|
|
/* 7 */ DECLARE_NV_DEV("NFORCE2-U400R"),
|
|
/* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA"),
|
|
/* 9 */ DECLARE_NV_DEV("NFORCE3-150"),
|
|
/* 10 */ DECLARE_NV_DEV("NFORCE3-250"),
|
|
/* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA"),
|
|
/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"),
|
|
/* 13 */ DECLARE_NV_DEV("NFORCE-CK804"),
|
|
/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
|
|
/* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"),
|
|
/* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"),
|
|
/* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"),
|
|
/* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"),
|
|
/* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"),
|
|
/* 20 */ DECLARE_NV_DEV("NFORCE-MCP73"),
|
|
/* 21 */ DECLARE_NV_DEV("NFORCE-MCP77"),
|
|
/* 22 */ DECLARE_AMD_DEV("AMD5536"),
|
|
};
|
|
|
|
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
amd_chipset = amd74xx_chipsets + id->driver_data;
|
|
amd_config = amd_ide_chips + id->driver_data;
|
|
if (dev->device != amd_config->id) {
|
|
printk(KERN_ERR "%s: assertion 0x%02x == 0x%02x failed !\n",
|
|
pci_name(dev), dev->device, amd_config->id);
|
|
return -ENODEV;
|
|
}
|
|
return ide_setup_pci_device(dev, amd_chipset);
|
|
}
|
|
|
|
static const struct pci_device_id amd74xx_pci_tbl[] = {
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 2 },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 3 },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 4 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 6 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 7 },
|
|
#ifdef CONFIG_BLK_DEV_IDE_SATA
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 8 },
|
|
#endif
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 9 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 10 },
|
|
#ifdef CONFIG_BLK_DEV_IDE_SATA
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 11 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 12 },
|
|
#endif
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 13 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 14 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 15 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 16 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 17 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 18 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 19 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 20 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 21 },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 22 },
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "AMD_IDE",
|
|
.id_table = amd74xx_pci_tbl,
|
|
.probe = amd74xx_probe,
|
|
};
|
|
|
|
static int __init amd74xx_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&driver);
|
|
}
|
|
|
|
module_init(amd74xx_ide_init);
|
|
|
|
MODULE_AUTHOR("Vojtech Pavlik");
|
|
MODULE_DESCRIPTION("AMD PCI IDE driver");
|
|
MODULE_LICENSE("GPL");
|