linux/drivers/clk/zynqmp/pll.c
Jolly Shah 3fde0e16d0 drivers: clk: Add ZynqMP clock driver
This patch adds CCF compliant clock driver for ZynqMP.
Clock driver queries supported clock information from
firmware and regiters pll and output clocks with CCF.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Tejas Patel <tejasp@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Acked-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-09 13:29:19 +02:00

336 lines
8.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Zynq UltraScale+ MPSoC PLL driver
*
* Copyright (C) 2016-2018 Xilinx
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include "clk-zynqmp.h"
/**
* struct zynqmp_pll - PLL clock
* @hw: Handle between common and hardware-specific interfaces
* @clk_id: PLL clock ID
*/
struct zynqmp_pll {
struct clk_hw hw;
u32 clk_id;
};
#define to_zynqmp_pll(_hw) container_of(_hw, struct zynqmp_pll, hw)
#define PLL_FBDIV_MIN 25
#define PLL_FBDIV_MAX 125
#define PS_PLL_VCO_MIN 1500000000
#define PS_PLL_VCO_MAX 3000000000UL
enum pll_mode {
PLL_MODE_INT,
PLL_MODE_FRAC,
};
#define FRAC_OFFSET 0x8
#define PLLFCFG_FRAC_EN BIT(31)
#define FRAC_DIV BIT(16) /* 2^16 */
/**
* zynqmp_pll_get_mode() - Get mode of PLL
* @hw: Handle between common and hardware-specific interfaces
*
* Return: Mode of PLL
*/
static inline enum pll_mode zynqmp_pll_get_mode(struct clk_hw *hw)
{
struct zynqmp_pll *clk = to_zynqmp_pll(hw);
u32 clk_id = clk->clk_id;
const char *clk_name = clk_hw_get_name(hw);
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
ret = eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_MODE, clk_id, 0,
ret_payload);
if (ret)
pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n",
__func__, clk_name, ret);
return ret_payload[1];
}
/**
* zynqmp_pll_set_mode() - Set the PLL mode
* @hw: Handle between common and hardware-specific interfaces
* @on: Flag to determine the mode
*/
static inline void zynqmp_pll_set_mode(struct clk_hw *hw, bool on)
{
struct zynqmp_pll *clk = to_zynqmp_pll(hw);
u32 clk_id = clk->clk_id;
const char *clk_name = clk_hw_get_name(hw);
int ret;
u32 mode;
const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
if (on)
mode = PLL_MODE_FRAC;
else
mode = PLL_MODE_INT;
ret = eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_MODE, clk_id, mode, NULL);
if (ret)
pr_warn_once("%s() PLL set frac mode failed for %s, ret = %d\n",
__func__, clk_name, ret);
}
/**
* zynqmp_pll_round_rate() - Round a clock frequency
* @hw: Handle between common and hardware-specific interfaces
* @rate: Desired clock frequency
* @prate: Clock frequency of parent clock
*
* Return: Frequency closest to @rate the hardware can generate
*/
static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
u32 fbdiv;
long rate_div, f;
/* Enable the fractional mode if needed */
rate_div = (rate * FRAC_DIV) / *prate;
f = rate_div % FRAC_DIV;
zynqmp_pll_set_mode(hw, !!f);
if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
if (rate > PS_PLL_VCO_MAX) {
fbdiv = rate / PS_PLL_VCO_MAX;
rate = rate / (fbdiv + 1);
}
if (rate < PS_PLL_VCO_MIN) {
fbdiv = DIV_ROUND_UP(PS_PLL_VCO_MIN, rate);
rate = rate * fbdiv;
}
return rate;
}
fbdiv = DIV_ROUND_CLOSEST(rate, *prate);
fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX);
return *prate * fbdiv;
}
/**
* zynqmp_pll_recalc_rate() - Recalculate clock frequency
* @hw: Handle between common and hardware-specific interfaces
* @parent_rate: Clock frequency of parent clock
*
* Return: Current clock frequency
*/
static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct zynqmp_pll *clk = to_zynqmp_pll(hw);
u32 clk_id = clk->clk_id;
const char *clk_name = clk_hw_get_name(hw);
u32 fbdiv, data;
unsigned long rate, frac;
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
ret = eemi_ops->clock_getdivider(clk_id, &fbdiv);
if (ret)
pr_warn_once("%s() get divider failed for %s, ret = %d\n",
__func__, clk_name, ret);
rate = parent_rate * fbdiv;
if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_DATA, clk_id, 0,
ret_payload);
data = ret_payload[1];
frac = (parent_rate * data) / FRAC_DIV;
rate = rate + frac;
}
return rate;
}
/**
* zynqmp_pll_set_rate() - Set rate of PLL
* @hw: Handle between common and hardware-specific interfaces
* @rate: Frequency of clock to be set
* @parent_rate: Clock frequency of parent clock
*
* Set PLL divider to set desired rate.
*
* Returns: rate which is set on success else error code
*/
static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct zynqmp_pll *clk = to_zynqmp_pll(hw);
u32 clk_id = clk->clk_id;
const char *clk_name = clk_hw_get_name(hw);
u32 fbdiv;
long rate_div, frac, m, f;
int ret;
const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
rate_div = (rate * FRAC_DIV) / parent_rate;
m = rate_div / FRAC_DIV;
f = rate_div % FRAC_DIV;
m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX));
rate = parent_rate * m;
frac = (parent_rate * f) / FRAC_DIV;
ret = eemi_ops->clock_setdivider(clk_id, m);
if (ret)
pr_warn_once("%s() set divider failed for %s, ret = %d\n",
__func__, clk_name, ret);
eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_DATA, clk_id, f, NULL);
return rate + frac;
}
fbdiv = DIV_ROUND_CLOSEST(rate, parent_rate);
fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX);
ret = eemi_ops->clock_setdivider(clk_id, fbdiv);
if (ret)
pr_warn_once("%s() set divider failed for %s, ret = %d\n",
__func__, clk_name, ret);
return parent_rate * fbdiv;
}
/**
* zynqmp_pll_is_enabled() - Check if a clock is enabled
* @hw: Handle between common and hardware-specific interfaces
*
* Return: 1 if the clock is enabled, 0 otherwise
*/
static int zynqmp_pll_is_enabled(struct clk_hw *hw)
{
struct zynqmp_pll *clk = to_zynqmp_pll(hw);
const char *clk_name = clk_hw_get_name(hw);
u32 clk_id = clk->clk_id;
unsigned int state;
int ret;
const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
ret = eemi_ops->clock_getstate(clk_id, &state);
if (ret) {
pr_warn_once("%s() clock get state failed for %s, ret = %d\n",
__func__, clk_name, ret);
return -EIO;
}
return state ? 1 : 0;
}
/**
* zynqmp_pll_enable() - Enable clock
* @hw: Handle between common and hardware-specific interfaces
*
* Return: 0 on success else error code
*/
static int zynqmp_pll_enable(struct clk_hw *hw)
{
struct zynqmp_pll *clk = to_zynqmp_pll(hw);
const char *clk_name = clk_hw_get_name(hw);
u32 clk_id = clk->clk_id;
int ret;
const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
if (zynqmp_pll_is_enabled(hw))
return 0;
ret = eemi_ops->clock_enable(clk_id);
if (ret)
pr_warn_once("%s() clock enable failed for %s, ret = %d\n",
__func__, clk_name, ret);
return ret;
}
/**
* zynqmp_pll_disable() - Disable clock
* @hw: Handle between common and hardware-specific interfaces
*/
static void zynqmp_pll_disable(struct clk_hw *hw)
{
struct zynqmp_pll *clk = to_zynqmp_pll(hw);
const char *clk_name = clk_hw_get_name(hw);
u32 clk_id = clk->clk_id;
int ret;
const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
if (!zynqmp_pll_is_enabled(hw))
return;
ret = eemi_ops->clock_disable(clk_id);
if (ret)
pr_warn_once("%s() clock disable failed for %s, ret = %d\n",
__func__, clk_name, ret);
}
static const struct clk_ops zynqmp_pll_ops = {
.enable = zynqmp_pll_enable,
.disable = zynqmp_pll_disable,
.is_enabled = zynqmp_pll_is_enabled,
.round_rate = zynqmp_pll_round_rate,
.recalc_rate = zynqmp_pll_recalc_rate,
.set_rate = zynqmp_pll_set_rate,
};
/**
* zynqmp_clk_register_pll() - Register PLL with the clock framework
* @name: PLL name
* @clk_id: Clock ID
* @parents: Name of this clock's parents
* @num_parents: Number of parents
* @nodes: Clock topology node
*
* Return: clock hardware to the registered clock
*/
struct clk_hw *zynqmp_clk_register_pll(const char *name, u32 clk_id,
const char * const *parents,
u8 num_parents,
const struct clock_topology *nodes)
{
struct zynqmp_pll *pll;
struct clk_hw *hw;
struct clk_init_data init;
int ret;
init.name = name;
init.ops = &zynqmp_pll_ops;
init.flags = nodes->flag;
init.parent_names = parents;
init.num_parents = 1;
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
return ERR_PTR(-ENOMEM);
pll->hw.init = &init;
pll->clk_id = clk_id;
hw = &pll->hw;
ret = clk_hw_register(NULL, hw);
if (ret) {
kfree(pll);
return ERR_PTR(ret);
}
clk_hw_set_rate_range(hw, PS_PLL_VCO_MIN, PS_PLL_VCO_MAX);
if (ret < 0)
pr_err("%s:ERROR clk_set_rate_range failed %d\n", name, ret);
return hw;
}