mirror of
https://github.com/torvalds/linux.git
synced 2024-11-10 22:21:40 +00:00
0e32818397
When pci_assign_resource() is unable to assign resources to a BAR, it uses
pci_revert_fw_address() to fall back to a firmware assignment (if any).
Previously pci_revert_fw_address() assumed all addresses could reach the
device, but this is not true if the device is below a bridge that only
forwards addresses within its windows.
This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS
did not assign valid addresses to several bridges and USB devices:
pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff]
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff]
pci 0000:01:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff]
pci 0000:02:02.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff]
pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:06:08.0: USB UHCI 1.1
pci 0000:06:08.0: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.1: USB UHCI 1.1
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.0: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
pci 0000:06:08.1: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
During the first pass of assigning unassigned resources, there was not
enough I/O space available, so we couldn't assign the 06:08.0 BAR and
reverted to the firmware assignment (still unreachable). Reverting the
06:08.1 assignment failed because it conflicted with 06:08.0:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: no space for bridge window [io size 0x2000]
pci 0000:02:02.0: no space for bridge window [io size 0x1000]
pci 0000:05:00.0: no space for bridge window [io size 0x1000]
pci 0000:06:08.0: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.0: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff]
A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR,
but left the 06:08.0 BAR alone, so the UHCI device was still unusable:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff] released
pci 0000:00:11.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:06:08.0: BAR 4: assigned [io 0xfce0-0xfcff] # left alone
pci 0000:06:08.1: BAR 4: assigned [io 0x2000-0x201f]
...
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host controller halted, very bad!
uhci_hcd 0000:06:08.0: HCRESET not completed yet!
uhci_hcd 0000:06:08.0: HC died; cleaning up
If the address assigned by firmware is not reachable because it's not
within upstream bridge windows, fail instead of assigning the unusable
address from firmware.
[bhelgaas: commit log, use pci_upstream_bridge()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=16263
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203012338460.46819@angie.orcam.me.uk
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209211921250.29493@angie.orcam.me.uk
Fixes: 58c84eda07
("PCI: fall back to original BIOS BAR addresses")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.35+
523 lines
13 KiB
C
523 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Support routines for initializing a PCI subsystem
|
|
*
|
|
* Extruded from code written by
|
|
* Dave Rusling (david.rusling@reo.mts.dec.com)
|
|
* David Mosberger (davidm@cs.arizona.edu)
|
|
* David Miller (davem@redhat.com)
|
|
*
|
|
* Fixed for multiple PCI buses, 1999 Andrea Arcangeli <andrea@suse.de>
|
|
*
|
|
* Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
|
|
* Resource sorting
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/export.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/cache.h>
|
|
#include <linux/slab.h>
|
|
#include "pci.h"
|
|
|
|
static void pci_std_update_resource(struct pci_dev *dev, int resno)
|
|
{
|
|
struct pci_bus_region region;
|
|
bool disable;
|
|
u16 cmd;
|
|
u32 new, check, mask;
|
|
int reg;
|
|
struct resource *res = dev->resource + resno;
|
|
|
|
/* Per SR-IOV spec 3.4.1.11, VF BARs are RO zero */
|
|
if (dev->is_virtfn)
|
|
return;
|
|
|
|
/*
|
|
* Ignore resources for unimplemented BARs and unused resource slots
|
|
* for 64 bit BARs.
|
|
*/
|
|
if (!res->flags)
|
|
return;
|
|
|
|
if (res->flags & IORESOURCE_UNSET)
|
|
return;
|
|
|
|
/*
|
|
* Ignore non-moveable resources. This might be legacy resources for
|
|
* which no functional BAR register exists or another important
|
|
* system resource we shouldn't move around.
|
|
*/
|
|
if (res->flags & IORESOURCE_PCI_FIXED)
|
|
return;
|
|
|
|
pcibios_resource_to_bus(dev->bus, ®ion, res);
|
|
new = region.start;
|
|
|
|
if (res->flags & IORESOURCE_IO) {
|
|
mask = (u32)PCI_BASE_ADDRESS_IO_MASK;
|
|
new |= res->flags & ~PCI_BASE_ADDRESS_IO_MASK;
|
|
} else if (resno == PCI_ROM_RESOURCE) {
|
|
mask = PCI_ROM_ADDRESS_MASK;
|
|
} else {
|
|
mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
|
|
new |= res->flags & ~PCI_BASE_ADDRESS_MEM_MASK;
|
|
}
|
|
|
|
if (resno < PCI_ROM_RESOURCE) {
|
|
reg = PCI_BASE_ADDRESS_0 + 4 * resno;
|
|
} else if (resno == PCI_ROM_RESOURCE) {
|
|
|
|
/*
|
|
* Apparently some Matrox devices have ROM BARs that read
|
|
* as zero when disabled, so don't update ROM BARs unless
|
|
* they're enabled. See
|
|
* https://lore.kernel.org/r/43147B3D.1030309@vc.cvut.cz/
|
|
* But we must update ROM BAR for buggy devices where even a
|
|
* disabled ROM can conflict with other BARs.
|
|
*/
|
|
if (!(res->flags & IORESOURCE_ROM_ENABLE) &&
|
|
!dev->rom_bar_overlap)
|
|
return;
|
|
|
|
reg = dev->rom_base_reg;
|
|
if (res->flags & IORESOURCE_ROM_ENABLE)
|
|
new |= PCI_ROM_ADDRESS_ENABLE;
|
|
} else
|
|
return;
|
|
|
|
/*
|
|
* We can't update a 64-bit BAR atomically, so when possible,
|
|
* disable decoding so that a half-updated BAR won't conflict
|
|
* with another device.
|
|
*/
|
|
disable = (res->flags & IORESOURCE_MEM_64) && !dev->mmio_always_on;
|
|
if (disable) {
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
pci_write_config_word(dev, PCI_COMMAND,
|
|
cmd & ~PCI_COMMAND_MEMORY);
|
|
}
|
|
|
|
pci_write_config_dword(dev, reg, new);
|
|
pci_read_config_dword(dev, reg, &check);
|
|
|
|
if ((new ^ check) & mask) {
|
|
pci_err(dev, "BAR %d: error updating (%#08x != %#08x)\n",
|
|
resno, new, check);
|
|
}
|
|
|
|
if (res->flags & IORESOURCE_MEM_64) {
|
|
new = region.start >> 16 >> 16;
|
|
pci_write_config_dword(dev, reg + 4, new);
|
|
pci_read_config_dword(dev, reg + 4, &check);
|
|
if (check != new) {
|
|
pci_err(dev, "BAR %d: error updating (high %#08x != %#08x)\n",
|
|
resno, new, check);
|
|
}
|
|
}
|
|
|
|
if (disable)
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
|
|
void pci_update_resource(struct pci_dev *dev, int resno)
|
|
{
|
|
if (resno <= PCI_ROM_RESOURCE)
|
|
pci_std_update_resource(dev, resno);
|
|
#ifdef CONFIG_PCI_IOV
|
|
else if (resno >= PCI_IOV_RESOURCES && resno <= PCI_IOV_RESOURCE_END)
|
|
pci_iov_update_resource(dev, resno);
|
|
#endif
|
|
}
|
|
|
|
int pci_claim_resource(struct pci_dev *dev, int resource)
|
|
{
|
|
struct resource *res = &dev->resource[resource];
|
|
struct resource *root, *conflict;
|
|
|
|
if (res->flags & IORESOURCE_UNSET) {
|
|
pci_info(dev, "can't claim BAR %d %pR: no address assigned\n",
|
|
resource, res);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* If we have a shadow copy in RAM, the PCI device doesn't respond
|
|
* to the shadow range, so we don't need to claim it, and upstream
|
|
* bridges don't need to route the range to the device.
|
|
*/
|
|
if (res->flags & IORESOURCE_ROM_SHADOW)
|
|
return 0;
|
|
|
|
root = pci_find_parent_resource(dev, res);
|
|
if (!root) {
|
|
pci_info(dev, "can't claim BAR %d %pR: no compatible bridge window\n",
|
|
resource, res);
|
|
res->flags |= IORESOURCE_UNSET;
|
|
return -EINVAL;
|
|
}
|
|
|
|
conflict = request_resource_conflict(root, res);
|
|
if (conflict) {
|
|
pci_info(dev, "can't claim BAR %d %pR: address conflict with %s %pR\n",
|
|
resource, res, conflict->name, conflict);
|
|
res->flags |= IORESOURCE_UNSET;
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(pci_claim_resource);
|
|
|
|
void pci_disable_bridge_window(struct pci_dev *dev)
|
|
{
|
|
/* MMIO Base/Limit */
|
|
pci_write_config_dword(dev, PCI_MEMORY_BASE, 0x0000fff0);
|
|
|
|
/* Prefetchable MMIO Base/Limit */
|
|
pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0);
|
|
pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0x0000fff0);
|
|
pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0xffffffff);
|
|
}
|
|
|
|
/*
|
|
* Generic function that returns a value indicating that the device's
|
|
* original BIOS BAR address was not saved and so is not available for
|
|
* reinstatement.
|
|
*
|
|
* Can be over-ridden by architecture specific code that implements
|
|
* reinstatement functionality rather than leaving it disabled when
|
|
* normal allocation attempts fail.
|
|
*/
|
|
resource_size_t __weak pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev,
|
|
int resno, resource_size_t size)
|
|
{
|
|
struct resource *root, *conflict;
|
|
resource_size_t fw_addr, start, end;
|
|
|
|
fw_addr = pcibios_retrieve_fw_addr(dev, resno);
|
|
if (!fw_addr)
|
|
return -ENOMEM;
|
|
|
|
start = res->start;
|
|
end = res->end;
|
|
res->start = fw_addr;
|
|
res->end = res->start + size - 1;
|
|
res->flags &= ~IORESOURCE_UNSET;
|
|
|
|
root = pci_find_parent_resource(dev, res);
|
|
if (!root) {
|
|
/*
|
|
* If dev is behind a bridge, accesses will only reach it
|
|
* if res is inside the relevant bridge window.
|
|
*/
|
|
if (pci_upstream_bridge(dev))
|
|
return -ENXIO;
|
|
|
|
/*
|
|
* On the root bus, assume the host bridge will forward
|
|
* everything.
|
|
*/
|
|
if (res->flags & IORESOURCE_IO)
|
|
root = &ioport_resource;
|
|
else
|
|
root = &iomem_resource;
|
|
}
|
|
|
|
pci_info(dev, "BAR %d: trying firmware assignment %pR\n",
|
|
resno, res);
|
|
conflict = request_resource_conflict(root, res);
|
|
if (conflict) {
|
|
pci_info(dev, "BAR %d: %pR conflicts with %s %pR\n",
|
|
resno, res, conflict->name, conflict);
|
|
res->start = start;
|
|
res->end = end;
|
|
res->flags |= IORESOURCE_UNSET;
|
|
return -EBUSY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* We don't have to worry about legacy ISA devices, so nothing to do here.
|
|
* This is marked as __weak because multiple architectures define it; it should
|
|
* eventually go away.
|
|
*/
|
|
resource_size_t __weak pcibios_align_resource(void *data,
|
|
const struct resource *res,
|
|
resource_size_t size,
|
|
resource_size_t align)
|
|
{
|
|
return res->start;
|
|
}
|
|
|
|
static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
|
|
int resno, resource_size_t size, resource_size_t align)
|
|
{
|
|
struct resource *res = dev->resource + resno;
|
|
resource_size_t min;
|
|
int ret;
|
|
|
|
min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
|
|
|
|
/*
|
|
* First, try exact prefetching match. Even if a 64-bit
|
|
* prefetchable bridge window is below 4GB, we can't put a 32-bit
|
|
* prefetchable resource in it because pbus_size_mem() assumes a
|
|
* 64-bit window will contain no 32-bit resources. If we assign
|
|
* things differently than they were sized, not everything will fit.
|
|
*/
|
|
ret = pci_bus_alloc_resource(bus, res, size, align, min,
|
|
IORESOURCE_PREFETCH | IORESOURCE_MEM_64,
|
|
pcibios_align_resource, dev);
|
|
if (ret == 0)
|
|
return 0;
|
|
|
|
/*
|
|
* If the prefetchable window is only 32 bits wide, we can put
|
|
* 64-bit prefetchable resources in it.
|
|
*/
|
|
if ((res->flags & (IORESOURCE_PREFETCH | IORESOURCE_MEM_64)) ==
|
|
(IORESOURCE_PREFETCH | IORESOURCE_MEM_64)) {
|
|
ret = pci_bus_alloc_resource(bus, res, size, align, min,
|
|
IORESOURCE_PREFETCH,
|
|
pcibios_align_resource, dev);
|
|
if (ret == 0)
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If we didn't find a better match, we can put any memory resource
|
|
* in a non-prefetchable window. If this resource is 32 bits and
|
|
* non-prefetchable, the first call already tried the only possibility
|
|
* so we don't need to try again.
|
|
*/
|
|
if (res->flags & (IORESOURCE_PREFETCH | IORESOURCE_MEM_64))
|
|
ret = pci_bus_alloc_resource(bus, res, size, align, min, 0,
|
|
pcibios_align_resource, dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int _pci_assign_resource(struct pci_dev *dev, int resno,
|
|
resource_size_t size, resource_size_t min_align)
|
|
{
|
|
struct pci_bus *bus;
|
|
int ret;
|
|
|
|
bus = dev->bus;
|
|
while ((ret = __pci_assign_resource(bus, dev, resno, size, min_align))) {
|
|
if (!bus->parent || !bus->self->transparent)
|
|
break;
|
|
bus = bus->parent;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int pci_assign_resource(struct pci_dev *dev, int resno)
|
|
{
|
|
struct resource *res = dev->resource + resno;
|
|
resource_size_t align, size;
|
|
int ret;
|
|
|
|
if (res->flags & IORESOURCE_PCI_FIXED)
|
|
return 0;
|
|
|
|
res->flags |= IORESOURCE_UNSET;
|
|
align = pci_resource_alignment(dev, res);
|
|
if (!align) {
|
|
pci_info(dev, "BAR %d: can't assign %pR (bogus alignment)\n",
|
|
resno, res);
|
|
return -EINVAL;
|
|
}
|
|
|
|
size = resource_size(res);
|
|
ret = _pci_assign_resource(dev, resno, size, align);
|
|
|
|
/*
|
|
* If we failed to assign anything, let's try the address
|
|
* where firmware left it. That at least has a chance of
|
|
* working, which is better than just leaving it disabled.
|
|
*/
|
|
if (ret < 0) {
|
|
pci_info(dev, "BAR %d: no space for %pR\n", resno, res);
|
|
ret = pci_revert_fw_address(res, dev, resno, size);
|
|
}
|
|
|
|
if (ret < 0) {
|
|
pci_info(dev, "BAR %d: failed to assign %pR\n", resno, res);
|
|
return ret;
|
|
}
|
|
|
|
res->flags &= ~IORESOURCE_UNSET;
|
|
res->flags &= ~IORESOURCE_STARTALIGN;
|
|
pci_info(dev, "BAR %d: assigned %pR\n", resno, res);
|
|
if (resno < PCI_BRIDGE_RESOURCES)
|
|
pci_update_resource(dev, resno);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(pci_assign_resource);
|
|
|
|
int pci_reassign_resource(struct pci_dev *dev, int resno, resource_size_t addsize,
|
|
resource_size_t min_align)
|
|
{
|
|
struct resource *res = dev->resource + resno;
|
|
unsigned long flags;
|
|
resource_size_t new_size;
|
|
int ret;
|
|
|
|
if (res->flags & IORESOURCE_PCI_FIXED)
|
|
return 0;
|
|
|
|
flags = res->flags;
|
|
res->flags |= IORESOURCE_UNSET;
|
|
if (!res->parent) {
|
|
pci_info(dev, "BAR %d: can't reassign an unassigned resource %pR\n",
|
|
resno, res);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* already aligned with min_align */
|
|
new_size = resource_size(res) + addsize;
|
|
ret = _pci_assign_resource(dev, resno, new_size, min_align);
|
|
if (ret) {
|
|
res->flags = flags;
|
|
pci_info(dev, "BAR %d: %pR (failed to expand by %#llx)\n",
|
|
resno, res, (unsigned long long) addsize);
|
|
return ret;
|
|
}
|
|
|
|
res->flags &= ~IORESOURCE_UNSET;
|
|
res->flags &= ~IORESOURCE_STARTALIGN;
|
|
pci_info(dev, "BAR %d: reassigned %pR (expanded by %#llx)\n",
|
|
resno, res, (unsigned long long) addsize);
|
|
if (resno < PCI_BRIDGE_RESOURCES)
|
|
pci_update_resource(dev, resno);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void pci_release_resource(struct pci_dev *dev, int resno)
|
|
{
|
|
struct resource *res = dev->resource + resno;
|
|
|
|
pci_info(dev, "BAR %d: releasing %pR\n", resno, res);
|
|
|
|
if (!res->parent)
|
|
return;
|
|
|
|
release_resource(res);
|
|
res->end = resource_size(res) - 1;
|
|
res->start = 0;
|
|
res->flags |= IORESOURCE_UNSET;
|
|
}
|
|
EXPORT_SYMBOL(pci_release_resource);
|
|
|
|
int pci_resize_resource(struct pci_dev *dev, int resno, int size)
|
|
{
|
|
struct resource *res = dev->resource + resno;
|
|
struct pci_host_bridge *host;
|
|
int old, ret;
|
|
u32 sizes;
|
|
u16 cmd;
|
|
|
|
/* Check if we must preserve the firmware's resource assignment */
|
|
host = pci_find_host_bridge(dev->bus);
|
|
if (host->preserve_config)
|
|
return -ENOTSUPP;
|
|
|
|
/* Make sure the resource isn't assigned before resizing it. */
|
|
if (!(res->flags & IORESOURCE_UNSET))
|
|
return -EBUSY;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
if (cmd & PCI_COMMAND_MEMORY)
|
|
return -EBUSY;
|
|
|
|
sizes = pci_rebar_get_possible_sizes(dev, resno);
|
|
if (!sizes)
|
|
return -ENOTSUPP;
|
|
|
|
if (!(sizes & BIT(size)))
|
|
return -EINVAL;
|
|
|
|
old = pci_rebar_get_current_size(dev, resno);
|
|
if (old < 0)
|
|
return old;
|
|
|
|
ret = pci_rebar_set_size(dev, resno, size);
|
|
if (ret)
|
|
return ret;
|
|
|
|
res->end = res->start + pci_rebar_size_to_bytes(size) - 1;
|
|
|
|
/* Check if the new config works by trying to assign everything. */
|
|
if (dev->bus->self) {
|
|
ret = pci_reassign_bridge_resources(dev->bus->self, res->flags);
|
|
if (ret)
|
|
goto error_resize;
|
|
}
|
|
return 0;
|
|
|
|
error_resize:
|
|
pci_rebar_set_size(dev, resno, old);
|
|
res->end = res->start + pci_rebar_size_to_bytes(old) - 1;
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(pci_resize_resource);
|
|
|
|
int pci_enable_resources(struct pci_dev *dev, int mask)
|
|
{
|
|
u16 cmd, old_cmd;
|
|
int i;
|
|
struct resource *r;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
old_cmd = cmd;
|
|
|
|
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
|
|
if (!(mask & (1 << i)))
|
|
continue;
|
|
|
|
r = &dev->resource[i];
|
|
|
|
if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
|
|
continue;
|
|
if ((i == PCI_ROM_RESOURCE) &&
|
|
(!(r->flags & IORESOURCE_ROM_ENABLE)))
|
|
continue;
|
|
|
|
if (r->flags & IORESOURCE_UNSET) {
|
|
pci_err(dev, "can't enable device: BAR %d %pR not assigned\n",
|
|
i, r);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!r->parent) {
|
|
pci_err(dev, "can't enable device: BAR %d %pR not claimed\n",
|
|
i, r);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (r->flags & IORESOURCE_IO)
|
|
cmd |= PCI_COMMAND_IO;
|
|
if (r->flags & IORESOURCE_MEM)
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
}
|
|
|
|
if (cmd != old_cmd) {
|
|
pci_info(dev, "enabling device (%04x -> %04x)\n", old_cmd, cmd);
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
return 0;
|
|
}
|