linux/drivers/usb/dwc3/gadget.h
Felipe Balbi 5945f789c8 usb: dwc3: switch to GPL v2 only
This is a Linux-only driver which makes use
of GPL-only symbols. It makes no sense to
maintain Dual BSD/GPL licensing for this driver.

Considering that the amount of work to use this
driver in any different operating system would likely
be as large as developing the driver from scratch and
considering that we depend on GPL-only symbols, we
will switch over to a GPL v2-only license.

Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29 13:56:44 +03:00

175 lines
5.1 KiB
C

/**
* gadget.h - DesignWare USB3 DRD Gadget Header
*
* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
*
* Authors: Felipe Balbi <balbi@ti.com>,
* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
* the License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __DRIVERS_USB_DWC3_GADGET_H
#define __DRIVERS_USB_DWC3_GADGET_H
#include <linux/list.h>
#include <linux/usb/gadget.h>
#include "io.h"
struct dwc3;
#define to_dwc3_ep(ep) (container_of(ep, struct dwc3_ep, endpoint))
#define gadget_to_dwc(g) (container_of(g, struct dwc3, gadget))
/* DEPCFG parameter 1 */
#define DWC3_DEPCFG_INT_NUM(n) ((n) << 0)
#define DWC3_DEPCFG_XFER_COMPLETE_EN (1 << 8)
#define DWC3_DEPCFG_XFER_IN_PROGRESS_EN (1 << 9)
#define DWC3_DEPCFG_XFER_NOT_READY_EN (1 << 10)
#define DWC3_DEPCFG_FIFO_ERROR_EN (1 << 11)
#define DWC3_DEPCFG_STREAM_EVENT_EN (1 << 13)
#define DWC3_DEPCFG_BINTERVAL_M1(n) ((n) << 16)
#define DWC3_DEPCFG_STREAM_CAPABLE (1 << 24)
#define DWC3_DEPCFG_EP_NUMBER(n) ((n) << 25)
#define DWC3_DEPCFG_BULK_BASED (1 << 30)
#define DWC3_DEPCFG_FIFO_BASED (1 << 31)
/* DEPCFG parameter 0 */
#define DWC3_DEPCFG_EP_TYPE(n) ((n) << 1)
#define DWC3_DEPCFG_MAX_PACKET_SIZE(n) ((n) << 3)
#define DWC3_DEPCFG_FIFO_NUMBER(n) ((n) << 17)
#define DWC3_DEPCFG_BURST_SIZE(n) ((n) << 22)
#define DWC3_DEPCFG_DATA_SEQ_NUM(n) ((n) << 26)
/* This applies for core versions earlier than 1.94a */
#define DWC3_DEPCFG_IGN_SEQ_NUM (1 << 31)
/* These apply for core versions 1.94a and later */
#define DWC3_DEPCFG_ACTION_INIT (0 << 30)
#define DWC3_DEPCFG_ACTION_RESTORE (1 << 30)
#define DWC3_DEPCFG_ACTION_MODIFY (2 << 30)
/* DEPXFERCFG parameter 0 */
#define DWC3_DEPXFERCFG_NUM_XFER_RES(n) ((n) & 0xffff)
struct dwc3_gadget_ep_cmd_params {
u32 param2;
u32 param1;
u32 param0;
};
/* -------------------------------------------------------------------------- */
#define to_dwc3_request(r) (container_of(r, struct dwc3_request, request))
static inline struct dwc3_request *next_request(struct list_head *list)
{
if (list_empty(list))
return NULL;
return list_first_entry(list, struct dwc3_request, list);
}
static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
{
struct dwc3_ep *dep = req->dep;
req->queued = true;
list_move_tail(&req->list, &dep->req_queued);
}
void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
int status);
int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
void dwc3_ep0_interrupt(struct dwc3 *dwc,
const struct dwc3_event_depevt *event);
void dwc3_ep0_out_start(struct dwc3 *dwc);
int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
gfp_t gfp_flags);
int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param);
/**
* dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
* @dwc: DesignWare USB3 Pointer
* @number: DWC endpoint number
*
* Caller should take care of locking
*/
static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3 *dwc, u8 number)
{
u32 res_id;
res_id = dwc3_readl(dwc->regs, DWC3_DEPCMD(number));
return DWC3_DEPCMD_GET_RSC_IDX(res_id);
}
/**
* dwc3_gadget_event_string - returns event name
* @event: the event code
*/
static inline const char *dwc3_gadget_event_string(u8 event)
{
switch (event) {
case DWC3_DEVICE_EVENT_DISCONNECT:
return "Disconnect";
case DWC3_DEVICE_EVENT_RESET:
return "Reset";
case DWC3_DEVICE_EVENT_CONNECT_DONE:
return "Connection Done";
case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
return "Link Status Change";
case DWC3_DEVICE_EVENT_WAKEUP:
return "WakeUp";
case DWC3_DEVICE_EVENT_EOPF:
return "End-Of-Frame";
case DWC3_DEVICE_EVENT_SOF:
return "Start-Of-Frame";
case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
return "Erratic Error";
case DWC3_DEVICE_EVENT_CMD_CMPL:
return "Command Complete";
case DWC3_DEVICE_EVENT_OVERFLOW:
return "Overflow";
}
return "UNKNOWN";
}
/**
* dwc3_ep_event_string - returns event name
* @event: then event code
*/
static inline const char *dwc3_ep_event_string(u8 event)
{
switch (event) {
case DWC3_DEPEVT_XFERCOMPLETE:
return "Transfer Complete";
case DWC3_DEPEVT_XFERINPROGRESS:
return "Transfer In-Progress";
case DWC3_DEPEVT_XFERNOTREADY:
return "Transfer Not Ready";
case DWC3_DEPEVT_RXTXFIFOEVT:
return "FIFO";
case DWC3_DEPEVT_STREAMEVT:
return "Stream";
case DWC3_DEPEVT_EPCMDCMPLT:
return "Endpoint Command Complete";
}
return "UNKNOWN";
}
#endif /* __DRIVERS_USB_DWC3_GADGET_H */