linux/include/asm-sparc/pci_32.h
Sam Ravnborg f5e706ad88 sparc: join the remaining header files
With this commit all sparc64 header files are moved to asm-sparc.
The remaining files (71 files) were too different to be trivially
merged so divide them up in a _32.h and a _64.h file which
are both included from the file with no bit size.

The following script were used:
cd include
FILES=`wc -l asm-sparc64/*h | grep -v '^     1' | cut -b 20-`

for FILE in ${FILES}; do
  echo $FILE:
  BASE=`echo $FILE | cut -d '.' -f 1`
  FN32=${BASE}_32.h
  FN64=${BASE}_64.h
  GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H
  git mv asm-sparc/$FILE asm-sparc/$FN32
  git mv asm-sparc64/$FILE asm-sparc/$FN64
  echo git mv done
  printf "#ifndef %s\n" $GUARD                             >   asm-sparc/$FILE
  printf "#define %s\n" $GUARD                             >>  asm-sparc/$FILE
  printf "#if defined(__sparc__) && defined(__arch64__)\n" >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN64                 >>  asm-sparc/$FILE
  printf "#else\n"                                         >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN32                 >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  git add asm-sparc/$FILE
  echo new file done
  printf "#include <asm-sparc/%s>\n" $FILE                 >  asm-sparc64/$FILE
  git add asm-sparc64/$FILE
  echo sparc64 file done
done

The guard contains three '_' to avoid conflict with existing guards.
In additing the two Kbuild files are emptied to avoid breaking
headers_* targets.
We will reintroduce the exported header files when the necessary
kbuild changes are merged.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17 21:55:51 -07:00

171 lines
6.0 KiB
C

#ifndef __SPARC_PCI_H
#define __SPARC_PCI_H
#ifdef __KERNEL__
/* Can be used to override the logic in pci_scan_bus for skipping
* already-configured bus numbers - to be used for buggy BIOSes
* or architectures with incomplete PCI setup by the loader.
*/
#define pcibios_assign_all_busses() 0
#define pcibios_scan_all_fns(a, b) 0
#define PCIBIOS_MIN_IO 0UL
#define PCIBIOS_MIN_MEM 0UL
#define PCI_IRQ_NONE 0xffffffff
static inline void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
}
static inline void pcibios_penalize_isa_irq(int irq, int active)
{
/* We don't do dynamic PCI IRQ allocation */
}
/* Dynamic DMA mapping stuff.
*/
#define PCI_DMA_BUS_IS_PHYS (0)
#include <asm/scatterlist.h>
struct pci_dev;
/* Allocate and map kernel buffer using consistent mode DMA for a device.
* hwdev should be valid struct pci_dev pointer for PCI devices.
*/
extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
/* Free and unmap a consistent DMA buffer.
* cpu_addr is what was returned from pci_alloc_consistent,
* size must be the same as what as passed into pci_alloc_consistent,
* and likewise dma_addr must be the same as what *dma_addrp was set to.
*
* References to the memory and mappings assosciated with cpu_addr/dma_addr
* past this call are illegal.
*/
extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
/* Map a single buffer of the indicated size for DMA in streaming mode.
* The 32-bit bus address to use is returned.
*
* Once the device is given the dma address, the device owns this memory
* until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
*/
extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
/* Unmap a single streaming mode DMA translation. The dma_addr and size
* must match what was provided for in a previous pci_map_single call. All
* other usages are undefined.
*
* After this call, reads by the cpu to the buffer are guaranteed to see
* whatever the device wrote there.
*/
extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
/* pci_unmap_{single,page} is not a nop, thus... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
__u32 LEN_NAME;
#define pci_unmap_addr(PTR, ADDR_NAME) \
((PTR)->ADDR_NAME)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
(((PTR)->ADDR_NAME) = (VAL))
#define pci_unmap_len(PTR, LEN_NAME) \
((PTR)->LEN_NAME)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
/*
* Same as above, only with pages instead of mapped addresses.
*/
extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
unsigned long offset, size_t size, int direction);
extern void pci_unmap_page(struct pci_dev *hwdev,
dma_addr_t dma_address, size_t size, int direction);
/* Map a set of buffers described by scatterlist in streaming
* mode for DMA. This is the scather-gather version of the
* above pci_map_single interface. Here the scatter gather list
* elements are each tagged with the appropriate dma address
* and length. They are obtained via sg_dma_{address,length}(SG).
*
* NOTE: An implementation may be able to use a smaller number of
* DMA address/length pairs than there are SG table elements.
* (for example via virtual mapping capabilities)
* The routine returns the number of addr/length pairs actually
* used, at most nents.
*
* Device ownership issues as mentioned above for pci_map_single are
* the same here.
*/
extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
/* Unmap a set of streaming mode DMA translations.
* Again, cpu read rules concerning calls here are the same as for
* pci_unmap_single() above.
*/
extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
/* Make physical memory consistent for a single
* streaming mode DMA translation after a transfer.
*
* If you perform a pci_map_single() but wish to interrogate the
* buffer using the cpu, yet do not wish to teardown the PCI dma
* mapping, you must call this function before doing so. At the
* next point you give the PCI dma address back to the card, you
* must first perform a pci_dma_sync_for_device, and then the device
* again owns the buffer.
*/
extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
/* Make physical memory consistent for a set of streaming
* mode DMA translations after a transfer.
*
* The same as pci_dma_sync_single_* but for a scatter-gather list,
* same rules and usage.
*/
extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
/* Return whether the given PCI device DMA address mask can
* be supported properly. For example, if your device can
* only drive the low 24-bits during PCI bus mastering, then
* you would pass 0x00ffffff as the mask to this function.
*/
static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
{
return 1;
}
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
{
*strat = PCI_DMA_BURST_INFINITY;
*strategy_parameter = ~0UL;
}
#endif
#define PCI_DMA_ERROR_CODE (~(dma_addr_t)0x0)
static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
{
return (dma_addr == PCI_DMA_ERROR_CODE);
}
struct device_node;
extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
#endif /* __KERNEL__ */
/* generic pci stuff */
#include <asm-generic/pci.h>
#endif /* __SPARC_PCI_H */