mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 01:51:53 +00:00
01c60dcea9
The ASPEED AST2400, and AST2500 in some configurations include a PCI-to-AHB MMIO bridge. This bridge allows a server to read and write in the BMC's physical address space. This feature is especially useful when using this bridge to send large files to the BMC. The host may use this to send down a firmware image by staging data at a specific memory address, and in a coordinated effort with the BMC's software stack and kernel, transmit the bytes. This driver enables the BMC to unlock the PCI bridge on demand, and configure it via ioctl to allow the host to write bytes to an agreed upon location. In the primary use-case, the region to use is known apriori on the BMC, and the host requests this information. Once this request is received, the BMC's software stack will enable the bridge and the region and then using some software flow control (possibly via IPMI packets), copy the bytes down. Once the process is complete, the BMC will disable the bridge and unset any region involved. The default behavior of this bridge when present is: enabled and all regions marked read-write. This driver will fix the regions to be read-only and then disable the bridge entirely. The memory regions protected are: * BMC flash MMIO window * System flash MMIO windows * SOC IO (peripheral MMIO) * DRAM The DRAM region itself is all of DRAM and cannot be further specified. Once the PCI bridge is enabled, the host can read all of DRAM, and if the DRAM section is write-enabled, then it can write to all of it. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
65 lines
2.3 KiB
Makefile
65 lines
2.3 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for misc devices that really don't fit anywhere else.
|
|
#
|
|
|
|
obj-$(CONFIG_IBM_ASM) += ibmasm/
|
|
obj-$(CONFIG_IBMVMC) += ibmvmc.o
|
|
obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot.o
|
|
obj-$(CONFIG_AD525X_DPOT_I2C) += ad525x_dpot-i2c.o
|
|
obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o
|
|
obj-$(CONFIG_INTEL_MID_PTI) += pti.o
|
|
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
|
|
obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
|
|
obj-$(CONFIG_DUMMY_IRQ) += dummy-irq.o
|
|
obj-$(CONFIG_ICS932S401) += ics932s401.o
|
|
obj-$(CONFIG_LKDTM) += lkdtm/
|
|
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
|
|
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
|
|
obj-$(CONFIG_PHANTOM) += phantom.o
|
|
obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o
|
|
obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o
|
|
obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o
|
|
obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o
|
|
obj-$(CONFIG_SGI_IOC4) += ioc4.o
|
|
obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
|
|
obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
|
|
obj-$(CONFIG_SGI_XP) += sgi-xp/
|
|
obj-$(CONFIG_SGI_GRU) += sgi-gru/
|
|
obj-$(CONFIG_CS5535_MFGPT) += cs5535-mfgpt.o
|
|
obj-$(CONFIG_HP_ILO) += hpilo.o
|
|
obj-$(CONFIG_APDS9802ALS) += apds9802als.o
|
|
obj-$(CONFIG_ISL29003) += isl29003.o
|
|
obj-$(CONFIG_ISL29020) += isl29020.o
|
|
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
|
|
obj-$(CONFIG_DS1682) += ds1682.o
|
|
obj-$(CONFIG_C2PORT) += c2port/
|
|
obj-$(CONFIG_HMC6352) += hmc6352.o
|
|
obj-y += eeprom/
|
|
obj-y += cb710/
|
|
obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o
|
|
obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
|
|
obj-$(CONFIG_PCH_PHUB) += pch_phub.o
|
|
obj-y += ti-st/
|
|
obj-y += lis3lv02d/
|
|
obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
|
|
obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/
|
|
obj-$(CONFIG_INTEL_MEI) += mei/
|
|
obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/
|
|
obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o
|
|
obj-$(CONFIG_SRAM) += sram.o
|
|
obj-$(CONFIG_SRAM_EXEC) += sram-exec.o
|
|
obj-y += mic/
|
|
obj-$(CONFIG_GENWQE) += genwqe/
|
|
obj-$(CONFIG_ECHO) += echo/
|
|
obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
|
|
obj-$(CONFIG_CXL_BASE) += cxl/
|
|
obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
|
|
obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
|
|
obj-$(CONFIG_ASPEED_P2A_CTRL) += aspeed-p2a-ctrl.o
|
|
obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
|
|
obj-$(CONFIG_OCXL) += ocxl/
|
|
obj-y += cardreader/
|
|
obj-$(CONFIG_PVPANIC) += pvpanic.o
|
|
obj-$(CONFIG_HABANA_AI) += habanalabs/
|