linux/drivers/ata
Adam Manzanares 9f56eca3ae ata: avoid probing NCQ Prio Support if not explicitly requested
Previously, when the ata device was being initialized we were
probing for NCQ prio support by checking the identify information
and also checking the log page that holds information about ncq prio
support.

This caused an error on an Intel HBA so the code is now updated to
only probe for NCQ prio support when the sysfs variable controlling
NCQ prio support is enabled.

tj: Update formatting, switch to spin_[un]lock_irq() and update
    locking a bit, use REVALIDATE instead of RESET, and return -EIO
    instead of -EINVAL on config failure.

Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-12-13 17:20:17 -05:00
..
acard-ahci.c ahci: Store irq number in struct ahci_host_priv 2015-06-03 01:37:49 -04:00
ahci_brcm.c ata: ahci_brcm: Add support for Broadcom NSP SoC 2016-06-16 16:24:55 -04:00
ahci_ceva.c drivers: ata: add support for Ceva sata host controller 2015-06-10 11:15:17 +09:00
ahci_da850.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_imx.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_mvebu.c ata: ahci_mvebu: add support for Armada 3700 variant 2016-02-18 12:41:17 -05:00
ahci_octeon.c libata: support AHCI on OCTEON platform 2016-02-11 10:12:04 -05:00
ahci_platform.c ata: ahci-platform: Add ports-implemented DT bindings. 2016-04-01 10:30:30 -04:00
ahci_qoriq.c ahci: qoriq: added ls1046a platform support 2016-10-19 13:33:01 -04:00
ahci_seattle.c ata: fix return value check in ahci_seattle_get_port_info() 2016-06-15 14:26:41 -04:00
ahci_st.c ahci: st: Add ports-implemented property in support 2016-08-10 12:16:49 -04:00
ahci_sunxi.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_tegra.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_xgene.c ata: ahci_xgene: dereferencing uninitialized pointer in probe 2016-03-11 12:40:34 -05:00
ahci.c ahci: warn about remapped NVMe devices 2016-12-05 14:31:24 -05:00
ahci.h ahci: use pci_alloc_irq_vectors 2016-09-06 12:38:17 -04:00
ata_generic.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
ata_piix.c ata_piix: Add Device IDs for Intel 9 Series PCH 2014-08-28 08:53:40 -04:00
Kconfig ata: ahci_brcm: Add support for Broadcom NSP SoC 2016-06-16 16:24:55 -04:00
libahci_platform.c ahci: Store irq number in struct ahci_host_priv 2015-06-03 01:37:49 -04:00
libahci.c ata: ATA Command Priority Disabled By Default 2016-10-19 14:34:36 -04:00
libata-acpi.c ACPI and power management updates for 3.15-rc1 2014-04-01 12:48:54 -07:00
libata-core.c ata: avoid probing NCQ Prio Support if not explicitly requested 2016-12-13 17:20:17 -05:00
libata-eh.c Merge branch 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2016-07-26 14:39:40 -07:00
libata-pmp.c ata: pmp: add quirk for Marvell 4140 SATA PMP 2015-07-14 17:46:38 -04:00
libata-scsi.c ata: avoid probing NCQ Prio Support if not explicitly requested 2016-12-13 17:20:17 -05:00
libata-sff.c libata: fix sff host state machine locking while polling 2016-02-01 11:33:21 -05:00
libata-trace.c libata: NCQ encapsulation for ZAC MANAGEMENT OUT 2016-05-09 12:36:46 -04:00
libata-transport.c ata: fix "ering" sysfs time printing 2016-06-17 12:07:11 -04:00
libata-transport.h [libata] Add ATA transport class 2010-10-21 20:21:03 -04:00
libata-zpodd.c libata: zpodd: eliminate odd_can_poweroff 2014-03-14 11:23:47 -04:00
libata.h ata: Enabling ATA Command Priorities 2016-10-19 14:34:36 -04:00
Makefile ata: ahci_brcmstb: rename to support across Broadcom SoC's 2016-06-16 16:24:55 -04:00
pata_acpi.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ali.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_amd.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_arasan_cf.c drivers: ata: pata_arasan_cf: use the same name for the same lock 2016-06-28 12:49:40 -04:00
pata_artop.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_at32.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_at91.c pata_at91: Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR 2016-09-22 11:48:46 -04:00
pata_atiixp.c pata_atiixp: fix trivial indentation misalignment on if statement 2016-05-27 11:22:46 -04:00
pata_atp867x.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_bf54x.c gpio: Include linux/gpio.h instead of asm/gpio.h 2016-02-16 00:20:03 +01:00
pata_cmd64x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cmd640.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5520.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_cs5530.c ata: Delete unnecessary checks before the function call "pci_dev_put" 2015-02-03 07:04:44 -05:00
pata_cs5535.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5536.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cypress.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_efar.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ep93xx.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_hpt3x2n.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt3x3.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_hpt37x.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt366.c ata: hpt366: fix incorrect mask when checking at cmd_high_time 2016-07-12 11:02:05 -04:00
pata_icside.c scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTS 2016-04-15 16:53:14 -04:00
pata_imx.c pata: imx: support controller modes up to PIO4 2016-11-09 11:48:58 -05:00
pata_isapnp.c PNP: ata/pata_isapnp: Use module_pnp_driver to register driver 2015-03-18 22:39:17 +01:00
pata_it821x.c pata_it821x: use "const char *" for string literals 2015-10-15 10:58:53 -04:00
pata_it8213.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_jmicron.c PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI 2015-08-24 15:27:11 -05:00
pata_legacy.c pata_legacy: Remove dead code 2014-03-11 08:30:53 -04:00
pata_macio.c PCI: Remove includes of asm/pci-bridge.h 2016-02-05 16:29:28 -06:00
pata_marvell.c ata: Use IS_ENABLED() instead of checking for built-in or module 2016-05-27 11:27:23 -04:00
pata_mpc52xx.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_mpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_netcell.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ninja32.c pata_ninja32: Avoid corrupting status flags 2016-08-30 11:59:47 -04:00
pata_ns87410.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ns87415.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_octeon_cf.c ata: Replace BUG() with BUG_ON(). 2016-09-22 11:46:52 -04:00
pata_of_platform.c ata: pata_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
pata_oldpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_opti.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_optidma.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_palmld.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_pcmcia.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_pdc202xx_old.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_pdc2027x.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_piccolo.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_platform.c ata: pata_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
pata_pxa.c ata: pata_pxa: dmaengine conversion 2015-09-10 17:02:04 -04:00
pata_radisys.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rb532_cf.c pata-rb532-cf: get rid of the irq_to_gpio() call 2016-02-18 11:26:27 -05:00
pata_rdc.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rz1000.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_samsung_cf.c libata: samsung_cf: fix handling platform_get_irq result 2015-09-25 11:50:15 -04:00
pata_sc1200.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sch.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_serverworks.c pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller 2014-10-07 17:10:14 -04:00
pata_sil680.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sl82c105.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_triflex.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_via.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pdc_adma.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sata_dwc_460ex.c ata: sata_dwc_460ex: remove redundant dev_err call 2016-07-19 14:32:04 -04:00
sata_fsl.c ata/sata_fsl.c: add ATA_FLAG_NO_LOG_PAGE to blacklist the controller for log page reads 2015-12-07 10:25:57 -05:00
sata_highbank.c remove lots of IS_ERR_VALUE abuses 2016-05-27 15:26:11 -07:00
sata_inic162x.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sata_mv.c ata: sata_mv: Replacing dma_pool_alloc and memset with a single call dma_pool_zalloc. 2016-09-20 16:07:16 -04:00
sata_nv.c ata:sata_nv - Change 1 to true for bool type variable. 2015-05-25 20:06:55 -04:00
sata_promise.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sata_promise.h
sata_qstor.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sata_rcar.c ata: sata_rcar: Remove obsolete platform_device_id entries 2015-11-24 09:54:36 -05:00
sata_sil24.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sata_sil.c sata_sil: disable trim 2015-11-30 10:02:49 -05:00
sata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_svw.c powerpc updates for 4.1 2015-04-16 13:53:32 -05:00
sata_sx4.c sata_sx4: correctly handling failed allocation 2015-12-31 21:33:42 -05:00
sata_uli.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_via.c sata_via: Implement hotplug for VT6421 2016-02-25 13:22:16 -05:00
sata_vsc.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sis.h