linux/drivers/base/power
Linus Torvalds f4fb859665 Thermal control updates for 5.19-rc1
- Add thermal library and thermal tools to encapsulate the netlink
    into event based callbacks (Daniel Lezcano, Jiapeng Chong).
 
  - Improve overheat condition handling during suspend-to-idle in the
    Intel PCH thermal driver (Zhang Rui).
 
  - Use local ops instead of global ops in devfreq_cooling (Kant Fan).
 
  - Clean up _OSC handling in int340x (Davidlohr Bueso).
 
  - Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
    (Hesham Almatary).
 
  - Add new k3 j72xx bangdap driver and the corresponding bindings
    (Keerthy).
 
  - Fix missing of_node_put() in the SC iMX driver at probe time
    (Miaoqian Lin).
 
  - Fix memory leak in __thermal_cooling_device_register() when
    device_register() fails by calling thermal_cooling_device_destroy_sysfs()
    (Yang Yingliang).
 
  - Add sc8180x and sc8280xp compatible string in the DT bindings and
    lMH support for QCom tsens driver (Bjorn Andersson).
 
  - Fix OTP Calibration Register values conforming to the documentation
    on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
 
  - Fix type in kerneldoc description for __thermal_bind_params (Corentin
    Labbe).
 
  - Fix potential NULL dereference in sr_thermal_probe() on Broadcom
    platform (Zheng Yongjun).
 
  - Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
    Pallikunhi).
 
  - Fix non-negative value support by preventing the value to be clamp
    to zero (Stefan Wahren).
 
  - Add compatible string and DT bindings for MSM8960 tsens driver
    (Dmitry Baryshkov).
 
  - Add hwmon support for K3 driver (Massimiliano Minella).
 
  - Refactor and add multiple generations support for QCom ADC driver
    (Jishnu Prakash).
 
  - Use platform_get_irq_optional() to get the interrupt on RCar driver and
    document Document RZ/V2L bindings (Lad Prabhakar).
 
  - Remove NULL check after container_of() call from the Intel HFI
    thermal driver (Haowen Bai).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmKL3MESHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxgzsQAKj4D0ROHLdqReYeIutS7IU6YQ+ejh3N
 krcAZvxQd8B3sVwSHHABPdsHwwfYjP4BwoHHVtha5q+5zFGBq5F3fJHsDeRxN23T
 NEOW81HBaLu81N5gNuAYg+NQcdqBR4U4IGKZfxWRyx13OMECXGtJRb/SIW/TuDYk
 AQIrqOivVEsVRtn+qp+x0rKHsj6ge+2lU1OyJagr2BDhgLrwzxl6cmNBfali1C3D
 sw4SqGwGVjEB0QDDpMbty9BsLEjNRE86kwoPh2u0K9dT9/b/P9pk1lp+pOnltspZ
 eOdwr0CtoEHw2x5tuhbO7fmvNIuf5jgSDWsCrP/xYnsozcRiwWsgyeJj4f5soreN
 kTJB8S/FH+fd7UuYqdmDIeJpDnkkGt1jIqjkDvfJNL7ffBWIe/meXKF4vBnrdlbd
 FMNQwzgc5eug07IFjOE43V1v5Hw1H1leVUwZczOMGNIhqyy0WZyQr7vzwbr16jCO
 x0hu3q3Y++5SUAUy9WzsOOrpRHa9JxUwVhZuLG7ajf+6pqPxB8kqs9CJe+sgWKju
 T4KqHbljJ2Gnkm9SngT0BdnB+AgparhXf8/8Mj0ZBQvamXw+ylNbYfG7qTZk5Ne/
 rUf4YDew6hGDqikyJBe2e0a1lLSoN4zaADC1lLYhC+Zp7m6eK0r3y3mhic0bZe1c
 RU/2eeA4kTuZ
 =3ltV
 -----END PGP SIGNATURE-----

Merge tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
 "These add a thermal library and thermal tools to wrap the netlink
  interface into event-based callbacks, improve overheat condition
  handling during suspend-to-idle on Intel SoCs, add some new hardware
  support, fix bugs and clean up code.

  Specifics:

   - Add thermal library and thermal tools to encapsulate the netlink
     into event based callbacks (Daniel Lezcano, Jiapeng Chong).

   - Improve overheat condition handling during suspend-to-idle in the
     Intel PCH thermal driver (Zhang Rui).

   - Use local ops instead of global ops in devfreq_cooling (Kant Fan).

   - Clean up _OSC handling in int340x (Davidlohr Bueso).

   - Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
     (Hesham Almatary).

   - Add new k3 j72xx bangdap driver and the corresponding bindings
     (Keerthy).

   - Fix missing of_node_put() in the SC iMX driver at probe time
     (Miaoqian Lin).

   - Fix memory leak in __thermal_cooling_device_register()
     when device_register() fails by calling
     thermal_cooling_device_destroy_sysfs() (Yang Yingliang).

   - Add sc8180x and sc8280xp compatible string in the DT bindings and
     lMH support for QCom tsens driver (Bjorn Andersson).

   - Fix OTP Calibration Register values conforming to the documentation
     on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).

   - Fix type in kerneldoc description for __thermal_bind_params
     (Corentin Labbe).

   - Fix potential NULL dereference in sr_thermal_probe() on Broadcom
     platform (Zheng Yongjun).

   - Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
     Pallikunhi).

   - Fix non-negative value support by preventing the value to be clamp
     to zero (Stefan Wahren).

   - Add compatible string and DT bindings for MSM8960 tsens driver
     (Dmitry Baryshkov).

   - Add hwmon support for K3 driver (Massimiliano Minella).

   - Refactor and add multiple generations support for QCom ADC driver
     (Jishnu Prakash).

   - Use platform_get_irq_optional() to get the interrupt on RCar driver
     and document Document RZ/V2L bindings (Lad Prabhakar).

   - Remove NULL check after container_of() call from the Intel HFI
     thermal driver (Haowen Bai)"

* tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
  thermal: intel: pch: improve the cooling delay log
  thermal: intel: pch: enhance overheat handling
  thermal: intel: pch: move cooling delay to suspend_noirq phase
  PM: wakeup: expose pm_wakeup_pending to modules
  thermal: k3_j72xx_bandgap: Add the bandgap driver support
  dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
  thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
  thermal/core: Fix memory leak in __thermal_cooling_device_register()
  dt-bindings: thermal: tsens: Add sc8280xp compatible
  dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
  thermal/drivers/qcom/lmh: Add sc8180x compatible
  thermal/drivers/rz2gl: Fix OTP Calibration Register values
  dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
  thermal: thermal_of: fix typo on __thermal_bind_params
  tools/thermal: remove unneeded semicolon
  tools/lib/thermal: remove unneeded semicolon
  thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
  tools/thermal: Add thermal daemon skeleton
  tools/thermal: Add a temperature capture tool
  tools/thermal: Add util library
  ...
2022-05-24 16:19:30 -07:00
..
clock_ops.c PM: runtime: add devm_pm_clk_create helper 2021-08-26 11:28:07 -07:00
common.c PM: domains: Extend dev_pm_domain_detach() doc 2022-04-13 17:07:58 +02:00
domain_governor.c PM: domains: Allocate governor data dynamically based on a genpd governor 2022-05-19 20:16:05 +02:00
domain.c PM: domains: Trust domain-idle-states from DT to be correct by genpd 2022-05-19 20:16:05 +02:00
generic_ops.c drivers: base: power: add proper SPDX identifiers on files that did not have them. 2019-04-04 20:03:40 +02:00
main.c Merge branches 'pm-sleep', 'pm-domains' and 'pm-docs' 2022-03-18 18:29:21 +01:00
Makefile PM / QoS: Initial kunit test 2019-11-29 12:04:49 +01:00
power.h PM / wakeirq: support enabling wake-up irq after runtime_suspend called 2021-10-27 20:49:32 +02:00
qos-test.c kunit: allow kunit tests to be loaded as a module 2020-01-09 16:42:29 -07:00
qos.c PM / QoS: Restore DEV_PM_QOS_MIN/MAX_FREQUENCY 2019-11-29 12:04:50 +01:00
runtime.c Merge branches 'pm-core', 'pm-sleep' and 'powercap' 2022-05-23 19:06:33 +02:00
sysfs.c drivers core: Miscellaneous changes for sysfs_emit 2020-10-02 13:12:07 +02:00
trace.c rtc: Check return value from mc146818_get_time() 2021-12-16 21:50:06 +01:00
wakeirq.c PM: sleep: wakeup: Fix typos in comments 2022-03-01 16:17:32 +01:00
wakeup_stats.c PM: wakeup: remove redundant assignment to variable retval 2021-04-22 15:22:38 +02:00
wakeup.c PM: wakeup: expose pm_wakeup_pending to modules 2022-05-19 19:40:25 +02:00