linux/drivers/gpio/gpio-sch.c
Andrei Coardos b11eba8b02 gpio: sch: remove unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-03 15:44:46 +02:00

415 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* GPIO interface for Intel Poulsbo SCH
*
* Copyright (c) 2010 CompuLab Ltd
* Author: Denis Turischev <denis@compulab.co.il>
*/
#include <linux/acpi.h>
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/gpio/driver.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci_ids.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#define GEN 0x00
#define GIO 0x04
#define GLV 0x08
#define GTPE 0x0c
#define GTNE 0x10
#define GGPE 0x14
#define GSMI 0x18
#define GTS 0x1c
#define CORE_BANK_OFFSET 0x00
#define RESUME_BANK_OFFSET 0x20
/*
* iLB datasheet describes GPE0BLK registers, in particular GPE0E.GPIO bit.
* Document Number: 328195-001
*/
#define GPE0E_GPIO 14
struct sch_gpio {
struct gpio_chip chip;
spinlock_t lock;
unsigned short iobase;
unsigned short resume_base;
/* GPE handling */
u32 gpe;
acpi_gpe_handler gpe_handler;
};
static unsigned int sch_gpio_offset(struct sch_gpio *sch, unsigned int gpio,
unsigned int reg)
{
unsigned int base = CORE_BANK_OFFSET;
if (gpio >= sch->resume_base) {
gpio -= sch->resume_base;
base = RESUME_BANK_OFFSET;
}
return base + reg + gpio / 8;
}
static unsigned int sch_gpio_bit(struct sch_gpio *sch, unsigned int gpio)
{
if (gpio >= sch->resume_base)
gpio -= sch->resume_base;
return gpio % 8;
}
static int sch_gpio_reg_get(struct sch_gpio *sch, unsigned int gpio, unsigned int reg)
{
unsigned short offset, bit;
u8 reg_val;
offset = sch_gpio_offset(sch, gpio, reg);
bit = sch_gpio_bit(sch, gpio);
reg_val = !!(inb(sch->iobase + offset) & BIT(bit));
return reg_val;
}
static void sch_gpio_reg_set(struct sch_gpio *sch, unsigned int gpio, unsigned int reg,
int val)
{
unsigned short offset, bit;
u8 reg_val;
offset = sch_gpio_offset(sch, gpio, reg);
bit = sch_gpio_bit(sch, gpio);
reg_val = inb(sch->iobase + offset);
if (val)
outb(reg_val | BIT(bit), sch->iobase + offset);
else
outb((reg_val & ~BIT(bit)), sch->iobase + offset);
}
static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned int gpio_num)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
unsigned long flags;
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GIO, 1);
spin_unlock_irqrestore(&sch->lock, flags);
return 0;
}
static int sch_gpio_get(struct gpio_chip *gc, unsigned int gpio_num)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
return sch_gpio_reg_get(sch, gpio_num, GLV);
}
static void sch_gpio_set(struct gpio_chip *gc, unsigned int gpio_num, int val)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
unsigned long flags;
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GLV, val);
spin_unlock_irqrestore(&sch->lock, flags);
}
static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned int gpio_num,
int val)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
unsigned long flags;
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GIO, 0);
spin_unlock_irqrestore(&sch->lock, flags);
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
* Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
* and an external pull-up is connected.
*/
sch_gpio_set(gc, gpio_num, val);
return 0;
}
static int sch_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio_num)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
if (sch_gpio_reg_get(sch, gpio_num, GIO))
return GPIO_LINE_DIRECTION_IN;
return GPIO_LINE_DIRECTION_OUT;
}
static const struct gpio_chip sch_gpio_chip = {
.label = "sch_gpio",
.owner = THIS_MODULE,
.direction_input = sch_gpio_direction_in,
.get = sch_gpio_get,
.direction_output = sch_gpio_direction_out,
.set = sch_gpio_set,
.get_direction = sch_gpio_get_direction,
};
static int sch_irq_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct sch_gpio *sch = gpiochip_get_data(gc);
irq_hw_number_t gpio_num = irqd_to_hwirq(d);
unsigned long flags;
int rising, falling;
switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_RISING:
rising = 1;
falling = 0;
break;
case IRQ_TYPE_EDGE_FALLING:
rising = 0;
falling = 1;
break;
case IRQ_TYPE_EDGE_BOTH:
rising = 1;
falling = 1;
break;
default:
return -EINVAL;
}
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GTPE, rising);
sch_gpio_reg_set(sch, gpio_num, GTNE, falling);
irq_set_handler_locked(d, handle_edge_irq);
spin_unlock_irqrestore(&sch->lock, flags);
return 0;
}
static void sch_irq_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct sch_gpio *sch = gpiochip_get_data(gc);
irq_hw_number_t gpio_num = irqd_to_hwirq(d);
unsigned long flags;
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GTS, 1);
spin_unlock_irqrestore(&sch->lock, flags);
}
static void sch_irq_mask_unmask(struct gpio_chip *gc, irq_hw_number_t gpio_num, int val)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
unsigned long flags;
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GGPE, val);
spin_unlock_irqrestore(&sch->lock, flags);
}
static void sch_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
irq_hw_number_t gpio_num = irqd_to_hwirq(d);
sch_irq_mask_unmask(gc, gpio_num, 0);
gpiochip_disable_irq(gc, gpio_num);
}
static void sch_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
irq_hw_number_t gpio_num = irqd_to_hwirq(d);
gpiochip_enable_irq(gc, gpio_num);
sch_irq_mask_unmask(gc, gpio_num, 1);
}
static const struct irq_chip sch_irqchip = {
.name = "sch_gpio",
.irq_ack = sch_irq_ack,
.irq_mask = sch_irq_mask,
.irq_unmask = sch_irq_unmask,
.irq_set_type = sch_irq_type,
.flags = IRQCHIP_IMMUTABLE,
GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
static u32 sch_gpio_gpe_handler(acpi_handle gpe_device, u32 gpe, void *context)
{
struct sch_gpio *sch = context;
struct gpio_chip *gc = &sch->chip;
unsigned long core_status, resume_status;
unsigned long pending;
unsigned long flags;
int offset;
u32 ret;
spin_lock_irqsave(&sch->lock, flags);
core_status = inl(sch->iobase + CORE_BANK_OFFSET + GTS);
resume_status = inl(sch->iobase + RESUME_BANK_OFFSET + GTS);
spin_unlock_irqrestore(&sch->lock, flags);
pending = (resume_status << sch->resume_base) | core_status;
for_each_set_bit(offset, &pending, sch->chip.ngpio)
generic_handle_domain_irq(gc->irq.domain, offset);
/* Set returning value depending on whether we handled an interrupt */
ret = pending ? ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
/* Acknowledge GPE to ACPICA */
ret |= ACPI_REENABLE_GPE;
return ret;
}
static void sch_gpio_remove_gpe_handler(void *data)
{
struct sch_gpio *sch = data;
acpi_disable_gpe(NULL, sch->gpe);
acpi_remove_gpe_handler(NULL, sch->gpe, sch->gpe_handler);
}
static int sch_gpio_install_gpe_handler(struct sch_gpio *sch)
{
struct device *dev = sch->chip.parent;
acpi_status status;
status = acpi_install_gpe_handler(NULL, sch->gpe, ACPI_GPE_LEVEL_TRIGGERED,
sch->gpe_handler, sch);
if (ACPI_FAILURE(status)) {
dev_err(dev, "Failed to install GPE handler for %u: %s\n",
sch->gpe, acpi_format_exception(status));
return -ENODEV;
}
status = acpi_enable_gpe(NULL, sch->gpe);
if (ACPI_FAILURE(status)) {
dev_err(dev, "Failed to enable GPE handler for %u: %s\n",
sch->gpe, acpi_format_exception(status));
acpi_remove_gpe_handler(NULL, sch->gpe, sch->gpe_handler);
return -ENODEV;
}
return devm_add_action_or_reset(dev, sch_gpio_remove_gpe_handler, sch);
}
static int sch_gpio_probe(struct platform_device *pdev)
{
struct gpio_irq_chip *girq;
struct sch_gpio *sch;
struct resource *res;
int ret;
sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL);
if (!sch)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!res)
return -EBUSY;
if (!devm_request_region(&pdev->dev, res->start, resource_size(res),
pdev->name))
return -EBUSY;
spin_lock_init(&sch->lock);
sch->iobase = res->start;
sch->chip = sch_gpio_chip;
sch->chip.label = dev_name(&pdev->dev);
sch->chip.parent = &pdev->dev;
switch (pdev->id) {
case PCI_DEVICE_ID_INTEL_SCH_LPC:
sch->resume_base = 10;
sch->chip.ngpio = 14;
/*
* GPIO[6:0] enabled by default
* GPIO7 is configured by the CMC as SLPIOVR
* Enable GPIO[9:8] core powered gpios explicitly
*/
sch_gpio_reg_set(sch, 8, GEN, 1);
sch_gpio_reg_set(sch, 9, GEN, 1);
/*
* SUS_GPIO[2:0] enabled by default
* Enable SUS_GPIO3 resume powered gpio explicitly
*/
sch_gpio_reg_set(sch, 13, GEN, 1);
break;
case PCI_DEVICE_ID_INTEL_ITC_LPC:
sch->resume_base = 5;
sch->chip.ngpio = 14;
break;
case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
sch->resume_base = 21;
sch->chip.ngpio = 30;
break;
case PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB:
sch->resume_base = 2;
sch->chip.ngpio = 8;
break;
default:
return -ENODEV;
}
girq = &sch->chip.irq;
gpio_irq_chip_set_chip(girq, &sch_irqchip);
girq->num_parents = 0;
girq->parents = NULL;
girq->parent_handler = NULL;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_bad_irq;
/* GPE setup is optional */
sch->gpe = GPE0E_GPIO;
sch->gpe_handler = sch_gpio_gpe_handler;
ret = sch_gpio_install_gpe_handler(sch);
if (ret)
dev_warn(&pdev->dev, "Can't setup GPE, no IRQ support\n");
return devm_gpiochip_add_data(&pdev->dev, &sch->chip, sch);
}
static struct platform_driver sch_gpio_driver = {
.driver = {
.name = "sch_gpio",
},
.probe = sch_gpio_probe,
};
module_platform_driver(sch_gpio_driver);
MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:sch_gpio");