mirror of
https://github.com/torvalds/linux.git
synced 2024-11-19 02:21:47 +00:00
64856974a3
On the G12a, there is a new 'region' to handle the drive-strength.
This is optional since the older do not have this.
Fixes: 29ae0952e8
("pinctrl: meson-g12a: add pinctrl driver support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
552 lines
14 KiB
C
552 lines
14 KiB
C
/*
|
|
* Pin controller and GPIO driver for Amlogic Meson SoCs
|
|
*
|
|
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* The available pins are organized in banks (A,B,C,D,E,X,Y,Z,AO,
|
|
* BOOT,CARD for meson6, X,Y,DV,H,Z,AO,BOOT,CARD for meson8 and
|
|
* X,Y,DV,H,AO,BOOT,CARD,DIF for meson8b) and each bank has a
|
|
* variable number of pins.
|
|
*
|
|
* The AO bank is special because it belongs to the Always-On power
|
|
* domain which can't be powered off; the bank also uses a set of
|
|
* registers different from the other banks.
|
|
*
|
|
* For each pin controller there are 4 different register ranges that
|
|
* control the following properties of the pins:
|
|
* 1) pin muxing
|
|
* 2) pull enable/disable
|
|
* 3) pull up/down
|
|
* 4) GPIO direction, output value, input value
|
|
*
|
|
* In some cases the register ranges for pull enable and pull
|
|
* direction are the same and thus there are only 3 register ranges.
|
|
*
|
|
* Since Meson G12A SoC, the ao register ranges for gpio, pull enable
|
|
* and pull direction are the same, so there are only 2 register ranges.
|
|
*
|
|
* For the pull and GPIO configuration every bank uses a contiguous
|
|
* set of bits in the register sets described above; the same register
|
|
* can be shared by more banks with different offsets.
|
|
*
|
|
* In addition to this there are some registers shared between all
|
|
* banks that control the IRQ functionality. This feature is not
|
|
* supported at the moment by the driver.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/seq_file.h>
|
|
|
|
#include "../core.h"
|
|
#include "../pinctrl-utils.h"
|
|
#include "pinctrl-meson.h"
|
|
|
|
/**
|
|
* meson_get_bank() - find the bank containing a given pin
|
|
*
|
|
* @pc: the pinctrl instance
|
|
* @pin: the pin number
|
|
* @bank: the found bank
|
|
*
|
|
* Return: 0 on success, a negative value on error
|
|
*/
|
|
static int meson_get_bank(struct meson_pinctrl *pc, unsigned int pin,
|
|
struct meson_bank **bank)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < pc->data->num_banks; i++) {
|
|
if (pin >= pc->data->banks[i].first &&
|
|
pin <= pc->data->banks[i].last) {
|
|
*bank = &pc->data->banks[i];
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* meson_calc_reg_and_bit() - calculate register and bit for a pin
|
|
*
|
|
* @bank: the bank containing the pin
|
|
* @pin: the pin number
|
|
* @reg_type: the type of register needed (pull-enable, pull, etc...)
|
|
* @reg: the computed register offset
|
|
* @bit: the computed bit
|
|
*/
|
|
static void meson_calc_reg_and_bit(struct meson_bank *bank, unsigned int pin,
|
|
enum meson_reg_type reg_type,
|
|
unsigned int *reg, unsigned int *bit)
|
|
{
|
|
struct meson_reg_desc *desc = &bank->regs[reg_type];
|
|
|
|
*reg = desc->reg * 4;
|
|
*bit = desc->bit + pin - bank->first;
|
|
}
|
|
|
|
static int meson_get_groups_count(struct pinctrl_dev *pcdev)
|
|
{
|
|
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
|
|
|
|
return pc->data->num_groups;
|
|
}
|
|
|
|
static const char *meson_get_group_name(struct pinctrl_dev *pcdev,
|
|
unsigned selector)
|
|
{
|
|
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
|
|
|
|
return pc->data->groups[selector].name;
|
|
}
|
|
|
|
static int meson_get_group_pins(struct pinctrl_dev *pcdev, unsigned selector,
|
|
const unsigned **pins, unsigned *num_pins)
|
|
{
|
|
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
|
|
|
|
*pins = pc->data->groups[selector].pins;
|
|
*num_pins = pc->data->groups[selector].num_pins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void meson_pin_dbg_show(struct pinctrl_dev *pcdev, struct seq_file *s,
|
|
unsigned offset)
|
|
{
|
|
seq_printf(s, " %s", dev_name(pcdev->dev));
|
|
}
|
|
|
|
static const struct pinctrl_ops meson_pctrl_ops = {
|
|
.get_groups_count = meson_get_groups_count,
|
|
.get_group_name = meson_get_group_name,
|
|
.get_group_pins = meson_get_group_pins,
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
|
|
.dt_free_map = pinctrl_utils_free_map,
|
|
.pin_dbg_show = meson_pin_dbg_show,
|
|
};
|
|
|
|
int meson_pmx_get_funcs_count(struct pinctrl_dev *pcdev)
|
|
{
|
|
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
|
|
|
|
return pc->data->num_funcs;
|
|
}
|
|
|
|
const char *meson_pmx_get_func_name(struct pinctrl_dev *pcdev,
|
|
unsigned selector)
|
|
{
|
|
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
|
|
|
|
return pc->data->funcs[selector].name;
|
|
}
|
|
|
|
int meson_pmx_get_groups(struct pinctrl_dev *pcdev, unsigned selector,
|
|
const char * const **groups,
|
|
unsigned * const num_groups)
|
|
{
|
|
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
|
|
|
|
*groups = pc->data->funcs[selector].groups;
|
|
*num_groups = pc->data->funcs[selector].num_groups;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
|
|
unsigned long *configs, unsigned num_configs)
|
|
{
|
|
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
|
|
struct meson_bank *bank;
|
|
enum pin_config_param param;
|
|
unsigned int reg, bit;
|
|
int i, ret;
|
|
|
|
ret = meson_get_bank(pc, pin, &bank);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
dev_dbg(pc->dev, "pin %u: disable bias\n", pin);
|
|
|
|
meson_calc_reg_and_bit(bank, pin, REG_PULLEN, ®,
|
|
&bit);
|
|
ret = regmap_update_bits(pc->reg_pullen, reg,
|
|
BIT(bit), 0);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
dev_dbg(pc->dev, "pin %u: enable pull-up\n", pin);
|
|
|
|
meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
|
|
®, &bit);
|
|
ret = regmap_update_bits(pc->reg_pullen, reg,
|
|
BIT(bit), BIT(bit));
|
|
if (ret)
|
|
return ret;
|
|
|
|
meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
|
|
ret = regmap_update_bits(pc->reg_pull, reg,
|
|
BIT(bit), BIT(bit));
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
dev_dbg(pc->dev, "pin %u: enable pull-down\n", pin);
|
|
|
|
meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
|
|
®, &bit);
|
|
ret = regmap_update_bits(pc->reg_pullen, reg,
|
|
BIT(bit), BIT(bit));
|
|
if (ret)
|
|
return ret;
|
|
|
|
meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
|
|
ret = regmap_update_bits(pc->reg_pull, reg,
|
|
BIT(bit), 0);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_pinconf_get_pull(struct meson_pinctrl *pc, unsigned int pin)
|
|
{
|
|
struct meson_bank *bank;
|
|
unsigned int reg, bit, val;
|
|
int ret, conf;
|
|
|
|
ret = meson_get_bank(pc, pin, &bank);
|
|
if (ret)
|
|
return ret;
|
|
|
|
meson_calc_reg_and_bit(bank, pin, REG_PULLEN, ®, &bit);
|
|
|
|
ret = regmap_read(pc->reg_pullen, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(val & BIT(bit))) {
|
|
conf = PIN_CONFIG_BIAS_DISABLE;
|
|
} else {
|
|
meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
|
|
|
|
ret = regmap_read(pc->reg_pull, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val & BIT(bit))
|
|
conf = PIN_CONFIG_BIAS_PULL_UP;
|
|
else
|
|
conf = PIN_CONFIG_BIAS_PULL_DOWN;
|
|
}
|
|
|
|
return conf;
|
|
}
|
|
|
|
static int meson_pinconf_get(struct pinctrl_dev *pcdev, unsigned int pin,
|
|
unsigned long *config)
|
|
{
|
|
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
|
|
enum pin_config_param param = pinconf_to_config_param(*config);
|
|
u16 arg;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
if (meson_pinconf_get_pull(pc, pin) == param)
|
|
arg = 1;
|
|
else
|
|
return -EINVAL;
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
dev_dbg(pc->dev, "pinconf for pin %u is %lu\n", pin, *config);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_pinconf_group_set(struct pinctrl_dev *pcdev,
|
|
unsigned int num_group,
|
|
unsigned long *configs, unsigned num_configs)
|
|
{
|
|
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
|
|
struct meson_pmx_group *group = &pc->data->groups[num_group];
|
|
int i;
|
|
|
|
dev_dbg(pc->dev, "set pinconf for group %s\n", group->name);
|
|
|
|
for (i = 0; i < group->num_pins; i++) {
|
|
meson_pinconf_set(pcdev, group->pins[i], configs,
|
|
num_configs);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_pinconf_group_get(struct pinctrl_dev *pcdev,
|
|
unsigned int group, unsigned long *config)
|
|
{
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static const struct pinconf_ops meson_pinconf_ops = {
|
|
.pin_config_get = meson_pinconf_get,
|
|
.pin_config_set = meson_pinconf_set,
|
|
.pin_config_group_get = meson_pinconf_group_get,
|
|
.pin_config_group_set = meson_pinconf_group_set,
|
|
.is_generic = true,
|
|
};
|
|
|
|
static int meson_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
struct meson_pinctrl *pc = gpiochip_get_data(chip);
|
|
unsigned int reg, bit;
|
|
struct meson_bank *bank;
|
|
int ret;
|
|
|
|
ret = meson_get_bank(pc, gpio, &bank);
|
|
if (ret)
|
|
return ret;
|
|
|
|
meson_calc_reg_and_bit(bank, gpio, REG_DIR, ®, &bit);
|
|
|
|
return regmap_update_bits(pc->reg_gpio, reg, BIT(bit), BIT(bit));
|
|
}
|
|
|
|
static int meson_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
|
|
int value)
|
|
{
|
|
struct meson_pinctrl *pc = gpiochip_get_data(chip);
|
|
unsigned int reg, bit;
|
|
struct meson_bank *bank;
|
|
int ret;
|
|
|
|
ret = meson_get_bank(pc, gpio, &bank);
|
|
if (ret)
|
|
return ret;
|
|
|
|
meson_calc_reg_and_bit(bank, gpio, REG_DIR, ®, &bit);
|
|
ret = regmap_update_bits(pc->reg_gpio, reg, BIT(bit), 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
meson_calc_reg_and_bit(bank, gpio, REG_OUT, ®, &bit);
|
|
return regmap_update_bits(pc->reg_gpio, reg, BIT(bit),
|
|
value ? BIT(bit) : 0);
|
|
}
|
|
|
|
static void meson_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
|
|
{
|
|
struct meson_pinctrl *pc = gpiochip_get_data(chip);
|
|
unsigned int reg, bit;
|
|
struct meson_bank *bank;
|
|
int ret;
|
|
|
|
ret = meson_get_bank(pc, gpio, &bank);
|
|
if (ret)
|
|
return;
|
|
|
|
meson_calc_reg_and_bit(bank, gpio, REG_OUT, ®, &bit);
|
|
regmap_update_bits(pc->reg_gpio, reg, BIT(bit),
|
|
value ? BIT(bit) : 0);
|
|
}
|
|
|
|
static int meson_gpio_get(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
struct meson_pinctrl *pc = gpiochip_get_data(chip);
|
|
unsigned int reg, bit, val;
|
|
struct meson_bank *bank;
|
|
int ret;
|
|
|
|
ret = meson_get_bank(pc, gpio, &bank);
|
|
if (ret)
|
|
return ret;
|
|
|
|
meson_calc_reg_and_bit(bank, gpio, REG_IN, ®, &bit);
|
|
regmap_read(pc->reg_gpio, reg, &val);
|
|
|
|
return !!(val & BIT(bit));
|
|
}
|
|
|
|
static int meson_gpiolib_register(struct meson_pinctrl *pc)
|
|
{
|
|
int ret;
|
|
|
|
pc->chip.label = pc->data->name;
|
|
pc->chip.parent = pc->dev;
|
|
pc->chip.request = gpiochip_generic_request;
|
|
pc->chip.free = gpiochip_generic_free;
|
|
pc->chip.direction_input = meson_gpio_direction_input;
|
|
pc->chip.direction_output = meson_gpio_direction_output;
|
|
pc->chip.get = meson_gpio_get;
|
|
pc->chip.set = meson_gpio_set;
|
|
pc->chip.base = -1;
|
|
pc->chip.ngpio = pc->data->num_pins;
|
|
pc->chip.can_sleep = false;
|
|
pc->chip.of_node = pc->of_node;
|
|
pc->chip.of_gpio_n_cells = 2;
|
|
|
|
ret = gpiochip_add_data(&pc->chip, pc);
|
|
if (ret) {
|
|
dev_err(pc->dev, "can't add gpio chip %s\n",
|
|
pc->data->name);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct regmap_config meson_regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
};
|
|
|
|
static struct regmap *meson_map_resource(struct meson_pinctrl *pc,
|
|
struct device_node *node, char *name)
|
|
{
|
|
struct resource res;
|
|
void __iomem *base;
|
|
int i;
|
|
|
|
i = of_property_match_string(node, "reg-names", name);
|
|
if (of_address_to_resource(node, i, &res))
|
|
return ERR_PTR(-ENOENT);
|
|
|
|
base = devm_ioremap_resource(pc->dev, &res);
|
|
if (IS_ERR(base))
|
|
return ERR_CAST(base);
|
|
|
|
meson_regmap_config.max_register = resource_size(&res) - 4;
|
|
meson_regmap_config.name = devm_kasprintf(pc->dev, GFP_KERNEL,
|
|
"%pOFn-%s", node,
|
|
name);
|
|
if (!meson_regmap_config.name)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
return devm_regmap_init_mmio(pc->dev, base, &meson_regmap_config);
|
|
}
|
|
|
|
static int meson_pinctrl_parse_dt(struct meson_pinctrl *pc,
|
|
struct device_node *node)
|
|
{
|
|
struct device_node *np, *gpio_np = NULL;
|
|
|
|
for_each_child_of_node(node, np) {
|
|
if (!of_find_property(np, "gpio-controller", NULL))
|
|
continue;
|
|
if (gpio_np) {
|
|
dev_err(pc->dev, "multiple gpio nodes\n");
|
|
return -EINVAL;
|
|
}
|
|
gpio_np = np;
|
|
}
|
|
|
|
if (!gpio_np) {
|
|
dev_err(pc->dev, "no gpio node found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pc->of_node = gpio_np;
|
|
|
|
pc->reg_mux = meson_map_resource(pc, gpio_np, "mux");
|
|
if (IS_ERR(pc->reg_mux)) {
|
|
dev_err(pc->dev, "mux registers not found\n");
|
|
return PTR_ERR(pc->reg_mux);
|
|
}
|
|
|
|
pc->reg_gpio = meson_map_resource(pc, gpio_np, "gpio");
|
|
if (IS_ERR(pc->reg_gpio)) {
|
|
dev_err(pc->dev, "gpio registers not found\n");
|
|
return PTR_ERR(pc->reg_gpio);
|
|
}
|
|
|
|
pc->reg_pull = meson_map_resource(pc, gpio_np, "pull");
|
|
/* Use gpio region if pull one is not present */
|
|
if (IS_ERR(pc->reg_pull))
|
|
pc->reg_pull = pc->reg_gpio;
|
|
|
|
pc->reg_pullen = meson_map_resource(pc, gpio_np, "pull-enable");
|
|
/* Use pull region if pull-enable one is not present */
|
|
if (IS_ERR(pc->reg_pullen))
|
|
pc->reg_pullen = pc->reg_pull;
|
|
|
|
pc->reg_ds = meson_map_resource(pc, gpio_np, "ds");
|
|
if (IS_ERR(pc->reg_ds)) {
|
|
dev_dbg(pc->dev, "ds registers not found - skipping\n");
|
|
pc->reg_ds = NULL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int meson_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct meson_pinctrl *pc;
|
|
int ret;
|
|
|
|
pc = devm_kzalloc(dev, sizeof(struct meson_pinctrl), GFP_KERNEL);
|
|
if (!pc)
|
|
return -ENOMEM;
|
|
|
|
pc->dev = dev;
|
|
pc->data = (struct meson_pinctrl_data *) of_device_get_match_data(dev);
|
|
|
|
ret = meson_pinctrl_parse_dt(pc, dev->of_node);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pc->desc.name = "pinctrl-meson";
|
|
pc->desc.owner = THIS_MODULE;
|
|
pc->desc.pctlops = &meson_pctrl_ops;
|
|
pc->desc.pmxops = pc->data->pmx_ops;
|
|
pc->desc.confops = &meson_pinconf_ops;
|
|
pc->desc.pins = pc->data->pins;
|
|
pc->desc.npins = pc->data->num_pins;
|
|
|
|
pc->pcdev = devm_pinctrl_register(pc->dev, &pc->desc, pc);
|
|
if (IS_ERR(pc->pcdev)) {
|
|
dev_err(pc->dev, "can't register pinctrl device");
|
|
return PTR_ERR(pc->pcdev);
|
|
}
|
|
|
|
return meson_gpiolib_register(pc);
|
|
}
|