linux/drivers/spi/spi-at91-usart.c
Amit Kumar Mahapatra via Alsa-devel 9e264f3f85
spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Acked-by: Heiko Stuebner <heiko@sntech.de> # Rockchip drivers
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org> # Aspeed driver
Reviewed-by: Dhruva Gole <d-gole@ti.com> # SPI Cadence QSPI
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> # spi-stm32-qspi
Acked-by: William Zhang <william.zhang@broadcom.com> # bcm63xx-hsspi driver
Reviewed-by: Serge Semin <fancer.lancer@gmail.com> # DW SSI part
Link: https://lore.kernel.org/r/167847070432.26.15076794204368669839@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-11 12:34:01 +00:00

680 lines
17 KiB
C

// SPDX-License-Identifier: GPL-2.0
//
// Driver for AT91 USART Controllers as SPI
//
// Copyright (C) 2018 Microchip Technology Inc.
//
// Author: Radu Pirea <radu.pirea@microchip.com>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-direction.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/gpio/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
#define US_CR 0x00
#define US_MR 0x04
#define US_IER 0x08
#define US_IDR 0x0C
#define US_CSR 0x14
#define US_RHR 0x18
#define US_THR 0x1C
#define US_BRGR 0x20
#define US_VERSION 0xFC
#define US_CR_RSTRX BIT(2)
#define US_CR_RSTTX BIT(3)
#define US_CR_RXEN BIT(4)
#define US_CR_RXDIS BIT(5)
#define US_CR_TXEN BIT(6)
#define US_CR_TXDIS BIT(7)
#define US_MR_SPI_HOST 0x0E
#define US_MR_CHRL GENMASK(7, 6)
#define US_MR_CPHA BIT(8)
#define US_MR_CPOL BIT(16)
#define US_MR_CLKO BIT(18)
#define US_MR_WRDBT BIT(20)
#define US_MR_LOOP BIT(15)
#define US_IR_RXRDY BIT(0)
#define US_IR_TXRDY BIT(1)
#define US_IR_OVRE BIT(5)
#define US_BRGR_SIZE BIT(16)
#define US_MIN_CLK_DIV 0x06
#define US_MAX_CLK_DIV BIT(16)
#define US_RESET (US_CR_RSTRX | US_CR_RSTTX)
#define US_DISABLE (US_CR_RXDIS | US_CR_TXDIS)
#define US_ENABLE (US_CR_RXEN | US_CR_TXEN)
#define US_OVRE_RXRDY_IRQS (US_IR_OVRE | US_IR_RXRDY)
#define US_INIT \
(US_MR_SPI_HOST | US_MR_CHRL | US_MR_CLKO | US_MR_WRDBT)
#define US_DMA_MIN_BYTES 16
#define US_DMA_TIMEOUT (msecs_to_jiffies(1000))
/* Register access macros */
#define at91_usart_spi_readl(port, reg) \
readl_relaxed((port)->regs + US_##reg)
#define at91_usart_spi_writel(port, reg, value) \
writel_relaxed((value), (port)->regs + US_##reg)
#define at91_usart_spi_readb(port, reg) \
readb_relaxed((port)->regs + US_##reg)
#define at91_usart_spi_writeb(port, reg, value) \
writeb_relaxed((value), (port)->regs + US_##reg)
struct at91_usart_spi {
struct platform_device *mpdev;
struct spi_transfer *current_transfer;
void __iomem *regs;
struct device *dev;
struct clk *clk;
struct completion xfer_completion;
/*used in interrupt to protect data reading*/
spinlock_t lock;
phys_addr_t phybase;
int irq;
unsigned int current_tx_remaining_bytes;
unsigned int current_rx_remaining_bytes;
u32 spi_clk;
u32 status;
bool xfer_failed;
bool use_dma;
};
static void dma_callback(void *data)
{
struct spi_controller *ctlr = data;
struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
aus->current_rx_remaining_bytes = 0;
complete(&aus->xfer_completion);
}
static bool at91_usart_spi_can_dma(struct spi_controller *ctrl,
struct spi_device *spi,
struct spi_transfer *xfer)
{
struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
return aus->use_dma && xfer->len >= US_DMA_MIN_BYTES;
}
static int at91_usart_spi_configure_dma(struct spi_controller *ctlr,
struct at91_usart_spi *aus)
{
struct dma_slave_config slave_config;
struct device *dev = &aus->mpdev->dev;
phys_addr_t phybase = aus->phybase;
dma_cap_mask_t mask;
int err = 0;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
ctlr->dma_tx = dma_request_chan(dev, "tx");
if (IS_ERR_OR_NULL(ctlr->dma_tx)) {
if (IS_ERR(ctlr->dma_tx)) {
err = PTR_ERR(ctlr->dma_tx);
goto at91_usart_spi_error_clear;
}
dev_dbg(dev,
"DMA TX channel not available, SPI unable to use DMA\n");
err = -EBUSY;
goto at91_usart_spi_error_clear;
}
ctlr->dma_rx = dma_request_chan(dev, "rx");
if (IS_ERR_OR_NULL(ctlr->dma_rx)) {
if (IS_ERR(ctlr->dma_rx)) {
err = PTR_ERR(ctlr->dma_rx);
goto at91_usart_spi_error;
}
dev_dbg(dev,
"DMA RX channel not available, SPI unable to use DMA\n");
err = -EBUSY;
goto at91_usart_spi_error;
}
slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
slave_config.dst_addr = (dma_addr_t)phybase + US_THR;
slave_config.src_addr = (dma_addr_t)phybase + US_RHR;
slave_config.src_maxburst = 1;
slave_config.dst_maxburst = 1;
slave_config.device_fc = false;
slave_config.direction = DMA_DEV_TO_MEM;
if (dmaengine_slave_config(ctlr->dma_rx, &slave_config)) {
dev_err(&ctlr->dev,
"failed to configure rx dma channel\n");
err = -EINVAL;
goto at91_usart_spi_error;
}
slave_config.direction = DMA_MEM_TO_DEV;
if (dmaengine_slave_config(ctlr->dma_tx, &slave_config)) {
dev_err(&ctlr->dev,
"failed to configure tx dma channel\n");
err = -EINVAL;
goto at91_usart_spi_error;
}
aus->use_dma = true;
return 0;
at91_usart_spi_error:
if (!IS_ERR_OR_NULL(ctlr->dma_tx))
dma_release_channel(ctlr->dma_tx);
if (!IS_ERR_OR_NULL(ctlr->dma_rx))
dma_release_channel(ctlr->dma_rx);
ctlr->dma_tx = NULL;
ctlr->dma_rx = NULL;
at91_usart_spi_error_clear:
return err;
}
static void at91_usart_spi_release_dma(struct spi_controller *ctlr)
{
if (ctlr->dma_rx)
dma_release_channel(ctlr->dma_rx);
if (ctlr->dma_tx)
dma_release_channel(ctlr->dma_tx);
}
static void at91_usart_spi_stop_dma(struct spi_controller *ctlr)
{
if (ctlr->dma_rx)
dmaengine_terminate_all(ctlr->dma_rx);
if (ctlr->dma_tx)
dmaengine_terminate_all(ctlr->dma_tx);
}
static int at91_usart_spi_dma_transfer(struct spi_controller *ctlr,
struct spi_transfer *xfer)
{
struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
struct dma_chan *rxchan = ctlr->dma_rx;
struct dma_chan *txchan = ctlr->dma_tx;
struct dma_async_tx_descriptor *rxdesc;
struct dma_async_tx_descriptor *txdesc;
dma_cookie_t cookie;
/* Disable RX interrupt */
at91_usart_spi_writel(aus, IDR, US_IR_RXRDY);
rxdesc = dmaengine_prep_slave_sg(rxchan,
xfer->rx_sg.sgl,
xfer->rx_sg.nents,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT |
DMA_CTRL_ACK);
if (!rxdesc)
goto at91_usart_spi_err_dma;
txdesc = dmaengine_prep_slave_sg(txchan,
xfer->tx_sg.sgl,
xfer->tx_sg.nents,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT |
DMA_CTRL_ACK);
if (!txdesc)
goto at91_usart_spi_err_dma;
rxdesc->callback = dma_callback;
rxdesc->callback_param = ctlr;
cookie = rxdesc->tx_submit(rxdesc);
if (dma_submit_error(cookie))
goto at91_usart_spi_err_dma;
cookie = txdesc->tx_submit(txdesc);
if (dma_submit_error(cookie))
goto at91_usart_spi_err_dma;
rxchan->device->device_issue_pending(rxchan);
txchan->device->device_issue_pending(txchan);
return 0;
at91_usart_spi_err_dma:
/* Enable RX interrupt if something fails and fallback to PIO */
at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
at91_usart_spi_stop_dma(ctlr);
return -ENOMEM;
}
static unsigned long at91_usart_spi_dma_timeout(struct at91_usart_spi *aus)
{
return wait_for_completion_timeout(&aus->xfer_completion,
US_DMA_TIMEOUT);
}
static inline u32 at91_usart_spi_tx_ready(struct at91_usart_spi *aus)
{
return aus->status & US_IR_TXRDY;
}
static inline u32 at91_usart_spi_rx_ready(struct at91_usart_spi *aus)
{
return aus->status & US_IR_RXRDY;
}
static inline u32 at91_usart_spi_check_overrun(struct at91_usart_spi *aus)
{
return aus->status & US_IR_OVRE;
}
static inline u32 at91_usart_spi_read_status(struct at91_usart_spi *aus)
{
aus->status = at91_usart_spi_readl(aus, CSR);
return aus->status;
}
static inline void at91_usart_spi_tx(struct at91_usart_spi *aus)
{
unsigned int len = aus->current_transfer->len;
unsigned int remaining = aus->current_tx_remaining_bytes;
const u8 *tx_buf = aus->current_transfer->tx_buf;
if (!remaining)
return;
if (at91_usart_spi_tx_ready(aus)) {
at91_usart_spi_writeb(aus, THR, tx_buf[len - remaining]);
aus->current_tx_remaining_bytes--;
}
}
static inline void at91_usart_spi_rx(struct at91_usart_spi *aus)
{
int len = aus->current_transfer->len;
int remaining = aus->current_rx_remaining_bytes;
u8 *rx_buf = aus->current_transfer->rx_buf;
if (!remaining)
return;
rx_buf[len - remaining] = at91_usart_spi_readb(aus, RHR);
aus->current_rx_remaining_bytes--;
}
static inline void
at91_usart_spi_set_xfer_speed(struct at91_usart_spi *aus,
struct spi_transfer *xfer)
{
at91_usart_spi_writel(aus, BRGR,
DIV_ROUND_UP(aus->spi_clk, xfer->speed_hz));
}
static irqreturn_t at91_usart_spi_interrupt(int irq, void *dev_id)
{
struct spi_controller *controller = dev_id;
struct at91_usart_spi *aus = spi_controller_get_devdata(controller);
spin_lock(&aus->lock);
at91_usart_spi_read_status(aus);
if (at91_usart_spi_check_overrun(aus)) {
aus->xfer_failed = true;
at91_usart_spi_writel(aus, IDR, US_IR_OVRE | US_IR_RXRDY);
spin_unlock(&aus->lock);
return IRQ_HANDLED;
}
if (at91_usart_spi_rx_ready(aus)) {
at91_usart_spi_rx(aus);
spin_unlock(&aus->lock);
return IRQ_HANDLED;
}
spin_unlock(&aus->lock);
return IRQ_NONE;
}
static int at91_usart_spi_setup(struct spi_device *spi)
{
struct at91_usart_spi *aus = spi_controller_get_devdata(spi->controller);
u32 *ausd = spi->controller_state;
unsigned int mr = at91_usart_spi_readl(aus, MR);
if (spi->mode & SPI_CPOL)
mr |= US_MR_CPOL;
else
mr &= ~US_MR_CPOL;
if (spi->mode & SPI_CPHA)
mr |= US_MR_CPHA;
else
mr &= ~US_MR_CPHA;
if (spi->mode & SPI_LOOP)
mr |= US_MR_LOOP;
else
mr &= ~US_MR_LOOP;
if (!ausd) {
ausd = kzalloc(sizeof(*ausd), GFP_KERNEL);
if (!ausd)
return -ENOMEM;
spi->controller_state = ausd;
}
*ausd = mr;
dev_dbg(&spi->dev,
"setup: bpw %u mode 0x%x -> mr %d %08x\n",
spi->bits_per_word, spi->mode, spi_get_chipselect(spi, 0), mr);
return 0;
}
static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
struct spi_device *spi,
struct spi_transfer *xfer)
{
struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
unsigned long dma_timeout = 0;
int ret = 0;
at91_usart_spi_set_xfer_speed(aus, xfer);
aus->xfer_failed = false;
aus->current_transfer = xfer;
aus->current_tx_remaining_bytes = xfer->len;
aus->current_rx_remaining_bytes = xfer->len;
while ((aus->current_tx_remaining_bytes ||
aus->current_rx_remaining_bytes) && !aus->xfer_failed) {
reinit_completion(&aus->xfer_completion);
if (at91_usart_spi_can_dma(ctlr, spi, xfer) &&
!ret) {
ret = at91_usart_spi_dma_transfer(ctlr, xfer);
if (ret)
continue;
dma_timeout = at91_usart_spi_dma_timeout(aus);
if (WARN_ON(dma_timeout == 0)) {
dev_err(&spi->dev, "DMA transfer timeout\n");
return -EIO;
}
aus->current_tx_remaining_bytes = 0;
} else {
at91_usart_spi_read_status(aus);
at91_usart_spi_tx(aus);
}
cpu_relax();
}
if (aus->xfer_failed) {
dev_err(aus->dev, "Overrun!\n");
return -EIO;
}
return 0;
}
static int at91_usart_spi_prepare_message(struct spi_controller *ctlr,
struct spi_message *message)
{
struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
struct spi_device *spi = message->spi;
u32 *ausd = spi->controller_state;
at91_usart_spi_writel(aus, CR, US_ENABLE);
at91_usart_spi_writel(aus, IER, US_OVRE_RXRDY_IRQS);
at91_usart_spi_writel(aus, MR, *ausd);
return 0;
}
static int at91_usart_spi_unprepare_message(struct spi_controller *ctlr,
struct spi_message *message)
{
struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
at91_usart_spi_writel(aus, IDR, US_OVRE_RXRDY_IRQS);
return 0;
}
static void at91_usart_spi_cleanup(struct spi_device *spi)
{
struct at91_usart_spi_device *ausd = spi->controller_state;
spi->controller_state = NULL;
kfree(ausd);
}
static void at91_usart_spi_init(struct at91_usart_spi *aus)
{
at91_usart_spi_writel(aus, MR, US_INIT);
at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
}
static int at91_usart_gpio_setup(struct platform_device *pdev)
{
struct gpio_descs *cs_gpios;
cs_gpios = devm_gpiod_get_array_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
if (IS_ERR(cs_gpios))
return PTR_ERR(cs_gpios);
return 0;
}
static int at91_usart_spi_probe(struct platform_device *pdev)
{
struct resource *regs;
struct spi_controller *controller;
struct at91_usart_spi *aus;
struct clk *clk;
int irq;
int ret;
regs = platform_get_resource(to_platform_device(pdev->dev.parent),
IORESOURCE_MEM, 0);
if (!regs)
return -EINVAL;
irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
if (irq < 0)
return irq;
clk = devm_clk_get(pdev->dev.parent, "usart");
if (IS_ERR(clk))
return PTR_ERR(clk);
ret = -ENOMEM;
controller = spi_alloc_host(&pdev->dev, sizeof(*aus));
if (!controller)
goto at91_usart_spi_probe_fail;
ret = at91_usart_gpio_setup(pdev);
if (ret)
goto at91_usart_spi_probe_fail;
controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
controller->dev.of_node = pdev->dev.parent->of_node;
controller->bits_per_word_mask = SPI_BPW_MASK(8);
controller->setup = at91_usart_spi_setup;
controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
controller->transfer_one = at91_usart_spi_transfer_one;
controller->prepare_message = at91_usart_spi_prepare_message;
controller->unprepare_message = at91_usart_spi_unprepare_message;
controller->can_dma = at91_usart_spi_can_dma;
controller->cleanup = at91_usart_spi_cleanup;
controller->max_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
US_MIN_CLK_DIV);
controller->min_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
US_MAX_CLK_DIV);
platform_set_drvdata(pdev, controller);
aus = spi_controller_get_devdata(controller);
aus->dev = &pdev->dev;
aus->regs = devm_ioremap_resource(&pdev->dev, regs);
if (IS_ERR(aus->regs)) {
ret = PTR_ERR(aus->regs);
goto at91_usart_spi_probe_fail;
}
aus->irq = irq;
aus->clk = clk;
ret = devm_request_irq(&pdev->dev, irq, at91_usart_spi_interrupt, 0,
dev_name(&pdev->dev), controller);
if (ret)
goto at91_usart_spi_probe_fail;
ret = clk_prepare_enable(clk);
if (ret)
goto at91_usart_spi_probe_fail;
aus->spi_clk = clk_get_rate(clk);
at91_usart_spi_init(aus);
aus->phybase = regs->start;
aus->mpdev = to_platform_device(pdev->dev.parent);
ret = at91_usart_spi_configure_dma(controller, aus);
if (ret)
goto at91_usart_fail_dma;
spin_lock_init(&aus->lock);
init_completion(&aus->xfer_completion);
ret = devm_spi_register_controller(&pdev->dev, controller);
if (ret)
goto at91_usart_fail_register_controller;
dev_info(&pdev->dev,
"AT91 USART SPI Controller version 0x%x at %pa (irq %d)\n",
at91_usart_spi_readl(aus, VERSION),
&regs->start, irq);
return 0;
at91_usart_fail_register_controller:
at91_usart_spi_release_dma(controller);
at91_usart_fail_dma:
clk_disable_unprepare(clk);
at91_usart_spi_probe_fail:
spi_controller_put(controller);
return ret;
}
__maybe_unused static int at91_usart_spi_runtime_suspend(struct device *dev)
{
struct spi_controller *ctlr = dev_get_drvdata(dev);
struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
clk_disable_unprepare(aus->clk);
pinctrl_pm_select_sleep_state(dev);
return 0;
}
__maybe_unused static int at91_usart_spi_runtime_resume(struct device *dev)
{
struct spi_controller *ctrl = dev_get_drvdata(dev);
struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
pinctrl_pm_select_default_state(dev);
return clk_prepare_enable(aus->clk);
}
__maybe_unused static int at91_usart_spi_suspend(struct device *dev)
{
struct spi_controller *ctrl = dev_get_drvdata(dev);
int ret;
ret = spi_controller_suspend(ctrl);
if (ret)
return ret;
if (!pm_runtime_suspended(dev))
at91_usart_spi_runtime_suspend(dev);
return 0;
}
__maybe_unused static int at91_usart_spi_resume(struct device *dev)
{
struct spi_controller *ctrl = dev_get_drvdata(dev);
struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
int ret;
if (!pm_runtime_suspended(dev)) {
ret = at91_usart_spi_runtime_resume(dev);
if (ret)
return ret;
}
at91_usart_spi_init(aus);
return spi_controller_resume(ctrl);
}
static void at91_usart_spi_remove(struct platform_device *pdev)
{
struct spi_controller *ctlr = platform_get_drvdata(pdev);
struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
at91_usart_spi_release_dma(ctlr);
clk_disable_unprepare(aus->clk);
}
static const struct dev_pm_ops at91_usart_spi_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(at91_usart_spi_suspend, at91_usart_spi_resume)
SET_RUNTIME_PM_OPS(at91_usart_spi_runtime_suspend,
at91_usart_spi_runtime_resume, NULL)
};
static struct platform_driver at91_usart_spi_driver = {
.driver = {
.name = "at91_usart_spi",
.pm = &at91_usart_spi_pm_ops,
},
.probe = at91_usart_spi_probe,
.remove_new = at91_usart_spi_remove,
};
module_platform_driver(at91_usart_spi_driver);
MODULE_DESCRIPTION("Microchip AT91 USART SPI Controller driver");
MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:at91_usart_spi");