linux/include/linux/dma-direct.h
Nicolas Saenz Julienne a7ba70f178 dma-mapping: treat dev->bus_dma_mask as a DMA limit
Using a mask to represent bus DMA constraints has a set of limitations.
The biggest one being it can only hold a power of two (minus one). The
DMA mapping code is already aware of this and treats dev->bus_dma_mask
as a limit. This quirk is already used by some architectures although
still rare.

With the introduction of the Raspberry Pi 4 we've found a new contender
for the use of bus DMA limits, as its PCIe bus can only address the
lower 3GB of memory (of a total of 4GB). This is impossible to represent
with a mask. To make things worse the device-tree code rounds non power
of two bus DMA limits to the next power of two, which is unacceptable in
this case.

In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all
over the tree and treat it as such. Note that dev->bus_dma_limit should
contain the higher accessible DMA address.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-11-21 18:14:35 +01:00

89 lines
2.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_DMA_DIRECT_H
#define _LINUX_DMA_DIRECT_H 1
#include <linux/dma-mapping.h>
#include <linux/memblock.h> /* for min_low_pfn */
#include <linux/mem_encrypt.h>
extern unsigned int zone_dma_bits;
#ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA
#include <asm/dma-direct.h>
#else
static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
{
dma_addr_t dev_addr = (dma_addr_t)paddr;
return dev_addr - ((dma_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
}
static inline phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dev_addr)
{
phys_addr_t paddr = (phys_addr_t)dev_addr;
return paddr + ((phys_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
}
#endif /* !CONFIG_ARCH_HAS_PHYS_TO_DMA */
#ifdef CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED
bool force_dma_unencrypted(struct device *dev);
#else
static inline bool force_dma_unencrypted(struct device *dev)
{
return false;
}
#endif /* CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED */
/*
* If memory encryption is supported, phys_to_dma will set the memory encryption
* bit in the DMA address, and dma_to_phys will clear it. The raw __phys_to_dma
* and __dma_to_phys versions should only be used on non-encrypted memory for
* special occasions like DMA coherent buffers.
*/
static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
{
return __sme_set(__phys_to_dma(dev, paddr));
}
static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
{
return __sme_clr(__dma_to_phys(dev, daddr));
}
static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size,
bool is_ram)
{
dma_addr_t end = addr + size - 1;
if (!dev->dma_mask)
return false;
if (is_ram && !IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT) &&
min(addr, end) < phys_to_dma(dev, PFN_PHYS(min_low_pfn)))
return false;
return end <= min_not_zero(*dev->dma_mask, dev->bus_dma_limit);
}
u64 dma_direct_get_required_mask(struct device *dev);
void *dma_direct_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
gfp_t gfp, unsigned long attrs);
void dma_direct_free(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t dma_addr, unsigned long attrs);
void *dma_direct_alloc_pages(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs);
void dma_direct_free_pages(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t dma_addr, unsigned long attrs);
struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
gfp_t gfp, unsigned long attrs);
int dma_direct_get_sgtable(struct device *dev, struct sg_table *sgt,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
unsigned long attrs);
bool dma_direct_can_mmap(struct device *dev);
int dma_direct_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
unsigned long attrs);
int dma_direct_supported(struct device *dev, u64 mask);
#endif /* _LINUX_DMA_DIRECT_H */