linux/include/media
Anssi Hannula 9d454d48eb [media] ati_remote: add support for Medion X10 Digitainer remote
Add support for another Medion X10 remote. This was apparently
originally used with the Medion Digitainer box, but is now sold
separately without any Digitainer labeling.

A peculiarity of this remote is a scrollwheel in place of up/down
buttons. Each direction is mapped to 8 different scancodes, each
corresponding to 1..8 notches, allowing multiple notches to the same
direction to be transmitted in a single scancode. The driver transforms
the multi-notch scancodes to multiple events of the single-notch
scancode.
(0x70..0x77 = 1..8 notches down, 0x78..0x7f = 1..8 notches up)

Since the scrollwheel scancodes are the same that are used for mouse on
some other X10 (ati_remote) remotes, the driver will now check whether
the active keymap has a keycode defined for the single-notch scancode
when a mouse/scrollwheel scancode (0x70..0x7f) is received. If set,
scrollwheel is assumed, otherwise mouse is assumed.

This remote ships with a different receiver than the already supported
Medion X10 remote, but they share the same USB ID. The only difference
in the USB descriptors is that the Digitainer receiver has the Remote
Wakeup bit set in bmAttributes of the Configuration Descriptor.
Therefore that is used to select the default keymap.

Thanks to Stephan Raue from OpenELEC (www.openelec.tv) for providing me
both a Medion X10 Digitainer remote+receiver and an already supported
Medion X10 remote+receiver. Thanks to Martin Beyss for providing some
useful information about the remote (including the "Digitainer" name).
This patch has been tested by both of them and myself.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Tested-by: Stephan Raue <stephan@openelec.tv>
Tested-by: Martin Beyss <Martin.Beyss@rwth-aachen.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-11 02:05:46 -03:00
..
blackfin [media] add blackfin capture bridge driver 2012-03-19 15:08:20 -03:00
davinci [media] davinci: vpif: remove machine specific header file includes 2012-02-08 10:46:54 -02:00
adp1653.h [media] adp1653: Add driver for LED flash controller 2011-07-27 17:55:39 -03:00
adv7183.h [media] adv7183: add adv7183 decoder driver 2012-03-19 15:04:10 -03:00
adv7343.h V4L/DVB (11743): Analog Devices ADV7343 video encoder driver 2009-06-16 18:20:59 -03:00
ak881x.h V4L/DVB: V4L: v4l2-subdev driver for AK8813 and AK8814 TV-encoders from AKM 2010-05-19 12:58:02 -03:00
as3645a.h [media] as3645a: Add driver for LED flash controller 2011-12-20 09:36:18 -02:00
atmel-isi.h [media] atmel-isi: add code to enable/disable ISI_MCK clock 2012-01-06 11:01:11 -02:00
bt819.h [media] bt819: the ioctls in the header are internal to the kernel 2010-12-29 08:17:19 -02:00
cs53l32a.h
cs5345.h
cx2341x.h [media] v4l2-ctrls: use const char * const * for the menu arrays 2010-12-30 08:02:14 -02:00
cx25840.h [media] cx25840: Add a flag to enable the CX23888 DIF to be enabled or not 2012-01-05 06:49:38 -02:00
gpio-ir-recv.h [media] gpio-ir-recv: a couple signedness bugs 2012-03-19 15:45:01 -03:00
i2c-addr.h V4L/DVB (9940): bt832: remove this driver 2008-12-30 09:39:25 -02:00
ir-kbd-i2c.h [media] rc: Rename remote controller type to rc_type instead of ir_type 2010-12-29 08:16:50 -02:00
lirc_dev.h [media] lirc_dev: store cdev in irctl, up maxdevs 2011-06-11 09:03:20 -03:00
lirc.h Fix common misspellings 2011-03-31 11:26:23 -03:00
m5mols.h [media] m5mols: Remove superfluous irq field from the platform data struct 2011-09-24 00:23:03 -03:00
m52790.h
media-device.h [media] media: Links setup 2011-03-22 04:53:16 -03:00
media-devnode.h [media] media: Media device node support 2011-03-22 04:52:22 -03:00
media-entity.h [media] media: fix truncated entity specification 2011-12-20 09:31:50 -02:00
mmp-camera.h [media] marvell-cam: Basic working MMP camera driver 2011-07-27 17:53:01 -03:00
msp3400.h V4L/DVB (11380): v4l2-subdev: change s_routing prototype 2009-04-06 21:44:27 -03:00
mt9m032.h [media] v4l: Add driver for Micron MT9M032 camera sensor 2012-03-19 18:56:33 -03:00
mt9p031.h [media] mt9p031: Aptina (Micron) MT9P031 5MP sensor driver 2011-09-11 09:49:28 -03:00
mt9t001.h [media] mt9t001: Aptina (Micron) MT9T001 3MP sensor driver 2011-09-21 15:31:08 -03:00
mt9t112.h V4L/DVB (13670): soc-camera: Add mt9t112 camera driver 2009-12-16 09:27:41 -02:00
mt9v011.h [media] v4l2-subdev: remove core.s_config and v4l2_i2c_new_subdev_cfg() 2011-01-19 11:45:30 -02:00
mt9v032.h [media] v4l: Add mt9v032 sensor driver 2011-05-20 09:29:49 -03:00
noon010pc30.h [media] Add v4l2 subdev driver for NOON010PC30L image sensor 2011-03-21 20:31:40 -03:00
omap1_camera.h [media] SoC Camera: add driver for OMAP1 camera interface 2010-10-21 07:55:37 -02:00
omap3isp.h [media] omap3isp: Clarify the clk_pol field in platform data 2011-12-20 09:31:00 -02:00
ov772x.h [media] V4L: ov772x: remove superfluous soc-camera client operations 2011-11-03 18:28:05 -02:00
ov7670.h [media] marvell-cam: Move cafe-ccic into its own directory 2011-07-27 17:53:00 -03:00
radio-si4713.h V4L/DVB (12551): FM TX: si4713: Add files to add radio interface for si4713 2009-09-12 12:19:19 -03:00
rc-core.h [media] rc-core.h: Surround macro with do {} while (0) 2011-09-03 20:56:22 -03:00
rc-map.h [media] ati_remote: add support for Medion X10 Digitainer remote 2012-04-11 02:05:46 -03:00
rj54n1cb0c.h V4L/DVB (13661): rj54n1cb0c: Add cropping, auto white balance, restrict sizes, add platform data 2009-12-16 09:27:30 -02:00
s5k6aa.h [media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor 2011-11-03 18:29:11 -02:00
s5p_fimc.h [media] s5p-fimc: Convert to use generic media bus polarity flags 2011-09-24 00:22:31 -03:00
s5p_hdmi.h [media] v4l: s5p-tv: hdmi: add support for platform data 2012-02-28 18:26:40 -03:00
saa6588.h [media] saa6588: rename rds.h to saa6588.h 2010-12-29 08:17:18 -02:00
saa6752hs.h
saa7115.h
saa7127.h
saa7146_vv.h V4L/DVB: saa7146: fix regression of the av7110/budget-av driver 2010-05-06 19:20:50 -03:00
saa7146.h Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux 2011-11-06 19:44:47 -08:00
sh_mobile_ceu.h [media] V4L: sh_mobile_ceu_camera: maximum image size depends on the hardware version 2012-03-19 22:11:06 -03:00
sh_mobile_csi2.h [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier 2011-07-27 17:56:08 -03:00
sh_vou.h [media] sh_vou: Don't use module names to load I2C modules 2010-10-22 21:53:33 -02:00
si4713.h [media] radio-si4713: Add regulator framework support 2010-12-29 08:16:35 -02:00
sii9234.h [media] v4l: s5p-tv: add sii9234 driver 2012-02-28 18:25:46 -03:00
soc_camera_platform.h [media] V4L: soc_camera_platform: remove superfluous soc-camera client operations 2011-11-03 18:28:12 -02:00
soc_camera.h [media] soc-camera: remove redundant parameter from .set_bus_param() 2012-01-06 11:00:23 -02:00
soc_mediabus.h [media] V4L: soc-camera: add helper functions for new bus configuration type 2011-11-03 18:27:13 -02:00
sr030pc30.h [media] Add driver for Siliconfile SR030PC30 VGA camera 2010-10-21 07:55:49 -02:00
timb_radio.h [media] radio-timb: Simplified platform data 2011-07-27 17:53:07 -03:00
timb_video.h [media] media: Add timberdale video-in driver 2010-12-29 08:16:46 -02:00
tuner-types.h
tuner.h [media] tuner: add support for Xceive XC5000C 2012-02-14 17:20:46 -02:00
tvaudio.h V4L/DVB (11376): tvaudio.h: add static inline to retrieve the list of possible i2c addrs. 2009-04-06 21:44:25 -03:00
tveeprom.h
tvp514x.h V4L/DVB (12246): tvp514x: Migration to sub-device framework 2009-09-19 00:18:09 -03:00
tvp5150.h
tvp7002.h V4L/DVB: Definitions for TVP7002 in DM365 2010-02-26 15:11:01 -03:00
tw9910.h tw9910: use TABs for indentation 2010-02-26 15:10:59 -03:00
upd64031a.h
upd64083.h
v4l2-chip-ident.h [media] vs6624: add vs6624 sensor driver 2012-03-19 15:04:26 -03:00
v4l2-common.h [media] v4l2_prio: move from v4l2-common to v4l2-dev 2011-03-22 16:37:54 -03:00
v4l2-ctrls.h [media] v4l: Introduce integer menu controls 2012-04-10 14:49:44 -03:00
v4l2-dev.h [media] v4l: Add custom compat_ioctl32 operation 2012-03-19 14:06:12 -03:00
v4l2-device.h [media] v4l2-device: fix a macro definition 2011-04-13 09:53:29 -03:00
v4l2-event.h [media] v4l2-event.h: add overview documentation to the header 2011-07-27 17:53:34 -03:00
v4l2-fh.h [media] v4l2-event/ctrls/fh: allocate events per fh and per type instead of just per-fh 2011-07-27 17:53:31 -03:00
v4l2-int-device.h include: replace linux/module.h with "struct module" wherever possible 2011-10-31 19:32:32 -04:00
v4l2-ioctl.h [media] v4l2: add VIDIOC_(TRY_)DECODER_CMD 2012-02-14 13:41:42 -02:00
v4l2-mediabus.h [media] v4l2: Add polarity flag definitions for the parallel bus FIELD signal 2011-09-24 00:21:31 -03:00
v4l2-mem2mem.h [media] Update Pawel Osciak's e-mail address 2011-03-22 04:55:05 -03:00
v4l2-subdev.h [media] v4l: Check pad number in get try pointer functions 2012-04-10 15:01:49 -03:00
videobuf2-core.h [media] vb2: add vb2_get_unmapped_area in vb2 core 2011-11-03 18:29:13 -02:00
videobuf2-dma-contig.h [media] media: vb2: dma contig allocator: use dma_addr instread of paddr 2011-09-06 15:05:10 -03:00
videobuf2-dma-sg.h [media] v4l: videobuf2: add DMA scatter/gather allocator 2011-03-21 20:31:34 -03:00
videobuf2-memops.h [media] Update Pawel Osciak's e-mail address 2011-03-22 04:55:05 -03:00
videobuf2-vmalloc.h [media] Update Pawel Osciak's e-mail address 2011-03-22 04:55:05 -03:00
videobuf-core.h [media] V4L: remove V4L1 compatibility mode 2010-12-29 08:17:07 -02:00
videobuf-dma-contig.h V4L/DVB: videobuf: add ext_lock argument to the queue init functions 2010-10-21 01:06:14 -02:00
videobuf-dma-sg.h doc: fix broken references 2011-09-27 18:08:04 +02:00
videobuf-dvb.h [media] Add missing include guard to header file 2011-05-25 21:42:30 -03:00
videobuf-vmalloc.h V4L/DVB: videobuf: add ext_lock argument to the queue init functions 2010-10-21 01:06:14 -02:00
wm8775.h [media] Add proper audio support for Nova-S Plus with wm8775 ADC 2011-03-21 20:32:19 -03:00