mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
1394f03221
This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
43 lines
1.1 KiB
C
43 lines
1.1 KiB
C
#ifndef _BFIN_SHMBUF_H
|
|
#define _BFIN_SHMBUF_H
|
|
|
|
/*
|
|
* The shmid64_ds structure for bfin architecture.
|
|
* Note extra padding because this structure is passed back and forth
|
|
* between kernel and user space.
|
|
*
|
|
* Pad space is left for:
|
|
* - 64-bit time_t to solve y2038 problem
|
|
* - 2 miscellaneous 32-bit values
|
|
*/
|
|
|
|
struct shmid64_ds {
|
|
struct ipc64_perm shm_perm; /* operation perms */
|
|
size_t shm_segsz; /* size of segment (bytes) */
|
|
__kernel_time_t shm_atime; /* last attach time */
|
|
unsigned long __unused1;
|
|
__kernel_time_t shm_dtime; /* last detach time */
|
|
unsigned long __unused2;
|
|
__kernel_time_t shm_ctime; /* last change time */
|
|
unsigned long __unused3;
|
|
__kernel_pid_t shm_cpid; /* pid of creator */
|
|
__kernel_pid_t shm_lpid; /* pid of last operator */
|
|
unsigned long shm_nattch; /* no. of current attaches */
|
|
unsigned long __unused4;
|
|
unsigned long __unused5;
|
|
};
|
|
|
|
struct shminfo64 {
|
|
unsigned long shmmax;
|
|
unsigned long shmmin;
|
|
unsigned long shmmni;
|
|
unsigned long shmseg;
|
|
unsigned long shmall;
|
|
unsigned long __unused1;
|
|
unsigned long __unused2;
|
|
unsigned long __unused3;
|
|
unsigned long __unused4;
|
|
};
|
|
|
|
#endif /* _BFIN_SHMBUF_H */
|