Sasha Levin 991ad9ec39 9p: disconnect channel when PCI device is removed ... When a virtio_9p pci device is being removed, we should close down any active channels and free up resources, we're not supposed to BUG() if there's still an open channel since it's a valid case when removing the PCI device. Otherwise, removing the PCI device with an open channel would cause the following BUG(): [ 1184.671416] ------------[ cut here ]------------ [ 1184.672057] kernel BUG at net/9p/trans_virtio.c:618! [ 1184.672057] invalid opcode: 0000 [#1] PREEMPT SMP [ 1184.672057] CPU 3 [ 1184.672057] Pid: 5, comm: kworker/u:0 Tainted: G W 3.4.0-rc2-next-20120413-sasha-dirty #76 [ 1184.672057] RIP: 0010:[<ffffffff825c9116>] [<ffffffff825c9116>] p9_virtio_remove+0x16/0x90 [ 1184.672057] RSP: 0018:ffff88000d653ac0 EFLAGS: 00010202 [ 1184.672057] RAX: ffffffff836bfb40 RBX: ffff88000c9b2148 RCX: ffff88000d658978 [ 1184.672057] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff880028868000 [ 1184.672057] RBP: ffff88000d653ad0 R08: 0000000000000000 R09: 0000000000000000 [ 1184.672057] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880028868000 [ 1184.672057] R13: ffffffff835aa7c0 R14: ffff880041630000 R15: ffff88000d653da0 [ 1184.672057] FS: 0000000000000000(0000) GS:ffff880035a00000(0000) knlGS:0000000000000000 [ 1184.672057] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1184.672057] CR2: 0000000001181000 CR3: 000000000eba1000 CR4: 00000000000406e0 [ 1184.672057] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 x000000000117a190 *[ 1184.672057] DR3: 00000000000000** 00 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1184.672057] Process kworker/u:0 (pid: 5, threadinfo ffff88000d652000, task ffff88000d658000) [ 1184.672057] Stack: [ 1184.672057] ffff880028868000 ffffffff836bfb40 ffff88000d653af0 ffffffff8193661b [ 1184.672057] ffff880028868008 ffffffff836bfb40 ffff88000d653b10 ffffffff81af1c81 [ 1184.672057] ffff880028868068 ffff880028868008 ffff88000d653b30 ffffffff81af257a [ 1184.795301] Call Trace: [ 1184.795301] [<ffffffff8193661b>] virtio_dev_remove+0x1b/0x60 [ 1184.795301] [<ffffffff81af1c81>] __device_release_driver+0x81/0xd0 [ 1184.795301] [<ffffffff81af257a>] device_release_driver+0x2a/0x40 [ 1184.795301] [<ffffffff81af0d48>] bus_remove_device+0x138/0x150 [ 1184.795301] [<ffffffff81aef08d>] device_del+0x14d/0x1b0 [ 1184.795301] [<ffffffff81aef138>] device_unregister+0x48/0x60 [ 1184.795301] [<ffffffff8193694d>] unregister_virtio_device+0xd/0x10 [ 1184.795301] [<ffffffff8265fc74>] virtio_pci_remove+0x2a/0x6c [ 1184.795301] [<ffffffff818a95ad>] pci_device_remove+0x4d/0x110 [ 1184.795301] [<ffffffff81af1c81>] __device_release_driver+0x81/0xd0 [ 1184.795301] [<ffffffff81af257a>] device_release_driver+0x2a/0x40 [ 1184.795301] [<ffffffff81af0d48>] bus_remove_device+0x138/0x150 [ 1184.795301] [<ffffffff81aef08d>] device_del+0x14d/0x1b0 [ 1184.795301] [<ffffffff81aef138>] device_unregister+0x48/0x60 [ 1184.795301] [<ffffffff818a36fa>] pci_stop_bus_device+0x6a/0x90 [ 1184.795301] [<ffffffff818a3791>] pci_stop_and_remove_bus_device+0x11/0x20 [ 1184.795301] [<ffffffff818c21d9>] remove_callback+0x9/0x10 [ 1184.795301] [<ffffffff81252d91>] sysfs_schedule_callback_work+0x21/0x60 [ 1184.795301] [<ffffffff810cb1a1>] process_one_work+0x281/0x430 [ 1184.795301] [<ffffffff810cb140>] ? process_one_work+0x220/0x430 [ 1184.795301] [<ffffffff81252d70>] ? sysfs_read_file+0x1c0/0x1c0 [ 1184.795301] [<ffffffff810cc613>] worker_thread+0x1f3/0x320 [ 1184.795301] [<ffffffff810cc420>] ? manage_workers.clone.13+0x130/0x130 [ 1184.795301] [<ffffffff810d30b2>] kthread+0xb2/0xc0 [ 1184.795301] [<ffffffff826783f4>] kernel_thread_helper+0x4/0x10 [ 1184.795301] [<ffffffff810deb18>] ? finish_task_switch+0x78/0xf0 [ 1184.795301] [<ffffffff82676574>] ? retint_restore_args+0x13/0x13 [ 1184.795301] [<ffffffff810d3000>] ? kthread_flush_work_fn+0x10/0x10 [ 1184.795301] [<ffffffff826783f0>] ? gs_change+0x13/0x13 [ 1184.795301] Code: c1 9e 0a 00 48 83 c4 08 5b c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 49 89 fc 53 48 8b 9f a8 04 00 00 80 3b 00 74 0a <0f> 0b 0f 1f 84 00 00 00 00 00 48 8b 87 88 04 00 00 ff 50 30 31 [ 1184.795301] RIP [<ffffffff825c9116>] p9_virtio_remove+0x16/0x90 [ 1184.795301] RSP <ffff88000d653ac0> [ 1184.952618] ---[ end trace a307b3ed40206b4c ]--- Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>		2012-05-22 12:16:10 +09:30
..
client.c	net/9p: handle flushed Tclunk/Tremove	2012-02-26 14:49:57 -06:00
error.c	9p: Reduce object size with CONFIG_NET_9P_DEBUG	2012-01-05 10:51:44 -06:00
Kconfig	9p: remove experimental tag from tested configurations	2011-05-25 08:46:38 -05:00
Makefile	[net/9p] Preparation and helper functions for zero copy	2011-03-15 09:57:34 -05:00
mod.c	9p: Reduce object size with CONFIG_NET_9P_DEBUG	2012-01-05 10:51:44 -06:00
protocol.c	9p: Reduce object size with CONFIG_NET_9P_DEBUG	2012-01-05 10:51:44 -06:00
protocol.h	net/9p: Convert net/9p protocol dumps to tracepoints	2011-10-24 11:13:12 -05:00
trans_common.c	fs/9p: Update zero-copy implementation in 9p	2011-10-24 11:13:11 -05:00
trans_common.h	fs/9p: Update zero-copy implementation in 9p	2011-10-24 11:13:11 -05:00
trans_fd.c	9p: Reduce object size with CONFIG_NET_9P_DEBUG	2012-01-05 10:51:44 -06:00
trans_rdma.c	9p: Reduce object size with CONFIG_NET_9P_DEBUG	2012-01-05 10:51:44 -06:00
trans_virtio.c	9p: disconnect channel when PCI device is removed	2012-05-22 12:16:10 +09:30
util.c	9p: Reduce object size with CONFIG_NET_9P_DEBUG	2012-01-05 10:51:44 -06:00