mirror of
https://github.com/torvalds/linux.git
synced 2024-12-28 13:51:44 +00:00
57795412a4
Add support for add/del_fdb operations and utilize the refactored static MAC table code. This resolves kernel warnings caused by the lack of fdb add function support in the current driver. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
3640 lines
95 KiB
C
3640 lines
95 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Microchip switch driver main logic
|
|
*
|
|
* Copyright (C) 2017-2019 Microchip Technology Inc.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/dsa/ksz_common.h>
|
|
#include <linux/export.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_data/microchip-ksz.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/if_bridge.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/micrel_phy.h>
|
|
#include <net/dsa.h>
|
|
#include <net/pkt_cls.h>
|
|
#include <net/switchdev.h>
|
|
|
|
#include "ksz_common.h"
|
|
#include "ksz_ptp.h"
|
|
#include "ksz8.h"
|
|
#include "ksz9477.h"
|
|
#include "lan937x.h"
|
|
|
|
#define MIB_COUNTER_NUM 0x20
|
|
|
|
struct ksz_stats_raw {
|
|
u64 rx_hi;
|
|
u64 rx_undersize;
|
|
u64 rx_fragments;
|
|
u64 rx_oversize;
|
|
u64 rx_jabbers;
|
|
u64 rx_symbol_err;
|
|
u64 rx_crc_err;
|
|
u64 rx_align_err;
|
|
u64 rx_mac_ctrl;
|
|
u64 rx_pause;
|
|
u64 rx_bcast;
|
|
u64 rx_mcast;
|
|
u64 rx_ucast;
|
|
u64 rx_64_or_less;
|
|
u64 rx_65_127;
|
|
u64 rx_128_255;
|
|
u64 rx_256_511;
|
|
u64 rx_512_1023;
|
|
u64 rx_1024_1522;
|
|
u64 rx_1523_2000;
|
|
u64 rx_2001;
|
|
u64 tx_hi;
|
|
u64 tx_late_col;
|
|
u64 tx_pause;
|
|
u64 tx_bcast;
|
|
u64 tx_mcast;
|
|
u64 tx_ucast;
|
|
u64 tx_deferred;
|
|
u64 tx_total_col;
|
|
u64 tx_exc_col;
|
|
u64 tx_single_col;
|
|
u64 tx_mult_col;
|
|
u64 rx_total;
|
|
u64 tx_total;
|
|
u64 rx_discards;
|
|
u64 tx_discards;
|
|
};
|
|
|
|
struct ksz88xx_stats_raw {
|
|
u64 rx;
|
|
u64 rx_hi;
|
|
u64 rx_undersize;
|
|
u64 rx_fragments;
|
|
u64 rx_oversize;
|
|
u64 rx_jabbers;
|
|
u64 rx_symbol_err;
|
|
u64 rx_crc_err;
|
|
u64 rx_align_err;
|
|
u64 rx_mac_ctrl;
|
|
u64 rx_pause;
|
|
u64 rx_bcast;
|
|
u64 rx_mcast;
|
|
u64 rx_ucast;
|
|
u64 rx_64_or_less;
|
|
u64 rx_65_127;
|
|
u64 rx_128_255;
|
|
u64 rx_256_511;
|
|
u64 rx_512_1023;
|
|
u64 rx_1024_1522;
|
|
u64 tx;
|
|
u64 tx_hi;
|
|
u64 tx_late_col;
|
|
u64 tx_pause;
|
|
u64 tx_bcast;
|
|
u64 tx_mcast;
|
|
u64 tx_ucast;
|
|
u64 tx_deferred;
|
|
u64 tx_total_col;
|
|
u64 tx_exc_col;
|
|
u64 tx_single_col;
|
|
u64 tx_mult_col;
|
|
u64 rx_discards;
|
|
u64 tx_discards;
|
|
};
|
|
|
|
static const struct ksz_mib_names ksz88xx_mib_names[] = {
|
|
{ 0x00, "rx" },
|
|
{ 0x01, "rx_hi" },
|
|
{ 0x02, "rx_undersize" },
|
|
{ 0x03, "rx_fragments" },
|
|
{ 0x04, "rx_oversize" },
|
|
{ 0x05, "rx_jabbers" },
|
|
{ 0x06, "rx_symbol_err" },
|
|
{ 0x07, "rx_crc_err" },
|
|
{ 0x08, "rx_align_err" },
|
|
{ 0x09, "rx_mac_ctrl" },
|
|
{ 0x0a, "rx_pause" },
|
|
{ 0x0b, "rx_bcast" },
|
|
{ 0x0c, "rx_mcast" },
|
|
{ 0x0d, "rx_ucast" },
|
|
{ 0x0e, "rx_64_or_less" },
|
|
{ 0x0f, "rx_65_127" },
|
|
{ 0x10, "rx_128_255" },
|
|
{ 0x11, "rx_256_511" },
|
|
{ 0x12, "rx_512_1023" },
|
|
{ 0x13, "rx_1024_1522" },
|
|
{ 0x14, "tx" },
|
|
{ 0x15, "tx_hi" },
|
|
{ 0x16, "tx_late_col" },
|
|
{ 0x17, "tx_pause" },
|
|
{ 0x18, "tx_bcast" },
|
|
{ 0x19, "tx_mcast" },
|
|
{ 0x1a, "tx_ucast" },
|
|
{ 0x1b, "tx_deferred" },
|
|
{ 0x1c, "tx_total_col" },
|
|
{ 0x1d, "tx_exc_col" },
|
|
{ 0x1e, "tx_single_col" },
|
|
{ 0x1f, "tx_mult_col" },
|
|
{ 0x100, "rx_discards" },
|
|
{ 0x101, "tx_discards" },
|
|
};
|
|
|
|
static const struct ksz_mib_names ksz9477_mib_names[] = {
|
|
{ 0x00, "rx_hi" },
|
|
{ 0x01, "rx_undersize" },
|
|
{ 0x02, "rx_fragments" },
|
|
{ 0x03, "rx_oversize" },
|
|
{ 0x04, "rx_jabbers" },
|
|
{ 0x05, "rx_symbol_err" },
|
|
{ 0x06, "rx_crc_err" },
|
|
{ 0x07, "rx_align_err" },
|
|
{ 0x08, "rx_mac_ctrl" },
|
|
{ 0x09, "rx_pause" },
|
|
{ 0x0A, "rx_bcast" },
|
|
{ 0x0B, "rx_mcast" },
|
|
{ 0x0C, "rx_ucast" },
|
|
{ 0x0D, "rx_64_or_less" },
|
|
{ 0x0E, "rx_65_127" },
|
|
{ 0x0F, "rx_128_255" },
|
|
{ 0x10, "rx_256_511" },
|
|
{ 0x11, "rx_512_1023" },
|
|
{ 0x12, "rx_1024_1522" },
|
|
{ 0x13, "rx_1523_2000" },
|
|
{ 0x14, "rx_2001" },
|
|
{ 0x15, "tx_hi" },
|
|
{ 0x16, "tx_late_col" },
|
|
{ 0x17, "tx_pause" },
|
|
{ 0x18, "tx_bcast" },
|
|
{ 0x19, "tx_mcast" },
|
|
{ 0x1A, "tx_ucast" },
|
|
{ 0x1B, "tx_deferred" },
|
|
{ 0x1C, "tx_total_col" },
|
|
{ 0x1D, "tx_exc_col" },
|
|
{ 0x1E, "tx_single_col" },
|
|
{ 0x1F, "tx_mult_col" },
|
|
{ 0x80, "rx_total" },
|
|
{ 0x81, "tx_total" },
|
|
{ 0x82, "rx_discards" },
|
|
{ 0x83, "tx_discards" },
|
|
};
|
|
|
|
static const struct ksz_dev_ops ksz8_dev_ops = {
|
|
.setup = ksz8_setup,
|
|
.get_port_addr = ksz8_get_port_addr,
|
|
.cfg_port_member = ksz8_cfg_port_member,
|
|
.flush_dyn_mac_table = ksz8_flush_dyn_mac_table,
|
|
.port_setup = ksz8_port_setup,
|
|
.r_phy = ksz8_r_phy,
|
|
.w_phy = ksz8_w_phy,
|
|
.r_mib_cnt = ksz8_r_mib_cnt,
|
|
.r_mib_pkt = ksz8_r_mib_pkt,
|
|
.r_mib_stat64 = ksz88xx_r_mib_stats64,
|
|
.freeze_mib = ksz8_freeze_mib,
|
|
.port_init_cnt = ksz8_port_init_cnt,
|
|
.fdb_dump = ksz8_fdb_dump,
|
|
.fdb_add = ksz8_fdb_add,
|
|
.fdb_del = ksz8_fdb_del,
|
|
.mdb_add = ksz8_mdb_add,
|
|
.mdb_del = ksz8_mdb_del,
|
|
.vlan_filtering = ksz8_port_vlan_filtering,
|
|
.vlan_add = ksz8_port_vlan_add,
|
|
.vlan_del = ksz8_port_vlan_del,
|
|
.mirror_add = ksz8_port_mirror_add,
|
|
.mirror_del = ksz8_port_mirror_del,
|
|
.get_caps = ksz8_get_caps,
|
|
.config_cpu_port = ksz8_config_cpu_port,
|
|
.enable_stp_addr = ksz8_enable_stp_addr,
|
|
.reset = ksz8_reset_switch,
|
|
.init = ksz8_switch_init,
|
|
.exit = ksz8_switch_exit,
|
|
.change_mtu = ksz8_change_mtu,
|
|
};
|
|
|
|
static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
|
|
unsigned int mode,
|
|
phy_interface_t interface,
|
|
struct phy_device *phydev, int speed,
|
|
int duplex, bool tx_pause,
|
|
bool rx_pause);
|
|
|
|
static const struct ksz_dev_ops ksz9477_dev_ops = {
|
|
.setup = ksz9477_setup,
|
|
.get_port_addr = ksz9477_get_port_addr,
|
|
.cfg_port_member = ksz9477_cfg_port_member,
|
|
.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
|
|
.port_setup = ksz9477_port_setup,
|
|
.set_ageing_time = ksz9477_set_ageing_time,
|
|
.r_phy = ksz9477_r_phy,
|
|
.w_phy = ksz9477_w_phy,
|
|
.r_mib_cnt = ksz9477_r_mib_cnt,
|
|
.r_mib_pkt = ksz9477_r_mib_pkt,
|
|
.r_mib_stat64 = ksz_r_mib_stats64,
|
|
.freeze_mib = ksz9477_freeze_mib,
|
|
.port_init_cnt = ksz9477_port_init_cnt,
|
|
.vlan_filtering = ksz9477_port_vlan_filtering,
|
|
.vlan_add = ksz9477_port_vlan_add,
|
|
.vlan_del = ksz9477_port_vlan_del,
|
|
.mirror_add = ksz9477_port_mirror_add,
|
|
.mirror_del = ksz9477_port_mirror_del,
|
|
.get_caps = ksz9477_get_caps,
|
|
.fdb_dump = ksz9477_fdb_dump,
|
|
.fdb_add = ksz9477_fdb_add,
|
|
.fdb_del = ksz9477_fdb_del,
|
|
.mdb_add = ksz9477_mdb_add,
|
|
.mdb_del = ksz9477_mdb_del,
|
|
.change_mtu = ksz9477_change_mtu,
|
|
.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
|
|
.config_cpu_port = ksz9477_config_cpu_port,
|
|
.tc_cbs_set_cinc = ksz9477_tc_cbs_set_cinc,
|
|
.enable_stp_addr = ksz9477_enable_stp_addr,
|
|
.reset = ksz9477_reset_switch,
|
|
.init = ksz9477_switch_init,
|
|
.exit = ksz9477_switch_exit,
|
|
};
|
|
|
|
static const struct ksz_dev_ops lan937x_dev_ops = {
|
|
.setup = lan937x_setup,
|
|
.teardown = lan937x_teardown,
|
|
.get_port_addr = ksz9477_get_port_addr,
|
|
.cfg_port_member = ksz9477_cfg_port_member,
|
|
.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
|
|
.port_setup = lan937x_port_setup,
|
|
.set_ageing_time = lan937x_set_ageing_time,
|
|
.r_phy = lan937x_r_phy,
|
|
.w_phy = lan937x_w_phy,
|
|
.r_mib_cnt = ksz9477_r_mib_cnt,
|
|
.r_mib_pkt = ksz9477_r_mib_pkt,
|
|
.r_mib_stat64 = ksz_r_mib_stats64,
|
|
.freeze_mib = ksz9477_freeze_mib,
|
|
.port_init_cnt = ksz9477_port_init_cnt,
|
|
.vlan_filtering = ksz9477_port_vlan_filtering,
|
|
.vlan_add = ksz9477_port_vlan_add,
|
|
.vlan_del = ksz9477_port_vlan_del,
|
|
.mirror_add = ksz9477_port_mirror_add,
|
|
.mirror_del = ksz9477_port_mirror_del,
|
|
.get_caps = lan937x_phylink_get_caps,
|
|
.setup_rgmii_delay = lan937x_setup_rgmii_delay,
|
|
.fdb_dump = ksz9477_fdb_dump,
|
|
.fdb_add = ksz9477_fdb_add,
|
|
.fdb_del = ksz9477_fdb_del,
|
|
.mdb_add = ksz9477_mdb_add,
|
|
.mdb_del = ksz9477_mdb_del,
|
|
.change_mtu = lan937x_change_mtu,
|
|
.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
|
|
.config_cpu_port = lan937x_config_cpu_port,
|
|
.tc_cbs_set_cinc = lan937x_tc_cbs_set_cinc,
|
|
.enable_stp_addr = ksz9477_enable_stp_addr,
|
|
.reset = lan937x_reset_switch,
|
|
.init = lan937x_switch_init,
|
|
.exit = lan937x_switch_exit,
|
|
};
|
|
|
|
static const u16 ksz8795_regs[] = {
|
|
[REG_IND_CTRL_0] = 0x6E,
|
|
[REG_IND_DATA_8] = 0x70,
|
|
[REG_IND_DATA_CHECK] = 0x72,
|
|
[REG_IND_DATA_HI] = 0x71,
|
|
[REG_IND_DATA_LO] = 0x75,
|
|
[REG_IND_MIB_CHECK] = 0x74,
|
|
[REG_IND_BYTE] = 0xA0,
|
|
[P_FORCE_CTRL] = 0x0C,
|
|
[P_LINK_STATUS] = 0x0E,
|
|
[P_LOCAL_CTRL] = 0x07,
|
|
[P_NEG_RESTART_CTRL] = 0x0D,
|
|
[P_REMOTE_STATUS] = 0x08,
|
|
[P_SPEED_STATUS] = 0x09,
|
|
[S_TAIL_TAG_CTRL] = 0x0C,
|
|
[P_STP_CTRL] = 0x02,
|
|
[S_START_CTRL] = 0x01,
|
|
[S_BROADCAST_CTRL] = 0x06,
|
|
[S_MULTICAST_CTRL] = 0x04,
|
|
[P_XMII_CTRL_0] = 0x06,
|
|
[P_XMII_CTRL_1] = 0x06,
|
|
};
|
|
|
|
static const u32 ksz8795_masks[] = {
|
|
[PORT_802_1P_REMAPPING] = BIT(7),
|
|
[SW_TAIL_TAG_ENABLE] = BIT(1),
|
|
[MIB_COUNTER_OVERFLOW] = BIT(6),
|
|
[MIB_COUNTER_VALID] = BIT(5),
|
|
[VLAN_TABLE_FID] = GENMASK(6, 0),
|
|
[VLAN_TABLE_MEMBERSHIP] = GENMASK(11, 7),
|
|
[VLAN_TABLE_VALID] = BIT(12),
|
|
[STATIC_MAC_TABLE_VALID] = BIT(21),
|
|
[STATIC_MAC_TABLE_USE_FID] = BIT(23),
|
|
[STATIC_MAC_TABLE_FID] = GENMASK(30, 24),
|
|
[STATIC_MAC_TABLE_OVERRIDE] = BIT(26),
|
|
[STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(24, 20),
|
|
[DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(6, 0),
|
|
[DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(8),
|
|
[DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7),
|
|
[DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 29),
|
|
[DYNAMIC_MAC_TABLE_FID] = GENMASK(26, 20),
|
|
[DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24),
|
|
[DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(28, 27),
|
|
[P_MII_TX_FLOW_CTRL] = BIT(5),
|
|
[P_MII_RX_FLOW_CTRL] = BIT(5),
|
|
};
|
|
|
|
static const u8 ksz8795_xmii_ctrl0[] = {
|
|
[P_MII_100MBIT] = 0,
|
|
[P_MII_10MBIT] = 1,
|
|
[P_MII_FULL_DUPLEX] = 0,
|
|
[P_MII_HALF_DUPLEX] = 1,
|
|
};
|
|
|
|
static const u8 ksz8795_xmii_ctrl1[] = {
|
|
[P_RGMII_SEL] = 3,
|
|
[P_GMII_SEL] = 2,
|
|
[P_RMII_SEL] = 1,
|
|
[P_MII_SEL] = 0,
|
|
[P_GMII_1GBIT] = 1,
|
|
[P_GMII_NOT_1GBIT] = 0,
|
|
};
|
|
|
|
static const u8 ksz8795_shifts[] = {
|
|
[VLAN_TABLE_MEMBERSHIP_S] = 7,
|
|
[VLAN_TABLE] = 16,
|
|
[STATIC_MAC_FWD_PORTS] = 16,
|
|
[STATIC_MAC_FID] = 24,
|
|
[DYNAMIC_MAC_ENTRIES_H] = 3,
|
|
[DYNAMIC_MAC_ENTRIES] = 29,
|
|
[DYNAMIC_MAC_FID] = 16,
|
|
[DYNAMIC_MAC_TIMESTAMP] = 27,
|
|
[DYNAMIC_MAC_SRC_PORT] = 24,
|
|
};
|
|
|
|
static const u16 ksz8863_regs[] = {
|
|
[REG_IND_CTRL_0] = 0x79,
|
|
[REG_IND_DATA_8] = 0x7B,
|
|
[REG_IND_DATA_CHECK] = 0x7B,
|
|
[REG_IND_DATA_HI] = 0x7C,
|
|
[REG_IND_DATA_LO] = 0x80,
|
|
[REG_IND_MIB_CHECK] = 0x80,
|
|
[P_FORCE_CTRL] = 0x0C,
|
|
[P_LINK_STATUS] = 0x0E,
|
|
[P_LOCAL_CTRL] = 0x0C,
|
|
[P_NEG_RESTART_CTRL] = 0x0D,
|
|
[P_REMOTE_STATUS] = 0x0E,
|
|
[P_SPEED_STATUS] = 0x0F,
|
|
[S_TAIL_TAG_CTRL] = 0x03,
|
|
[P_STP_CTRL] = 0x02,
|
|
[S_START_CTRL] = 0x01,
|
|
[S_BROADCAST_CTRL] = 0x06,
|
|
[S_MULTICAST_CTRL] = 0x04,
|
|
};
|
|
|
|
static const u32 ksz8863_masks[] = {
|
|
[PORT_802_1P_REMAPPING] = BIT(3),
|
|
[SW_TAIL_TAG_ENABLE] = BIT(6),
|
|
[MIB_COUNTER_OVERFLOW] = BIT(7),
|
|
[MIB_COUNTER_VALID] = BIT(6),
|
|
[VLAN_TABLE_FID] = GENMASK(15, 12),
|
|
[VLAN_TABLE_MEMBERSHIP] = GENMASK(18, 16),
|
|
[VLAN_TABLE_VALID] = BIT(19),
|
|
[STATIC_MAC_TABLE_VALID] = BIT(19),
|
|
[STATIC_MAC_TABLE_USE_FID] = BIT(21),
|
|
[STATIC_MAC_TABLE_FID] = GENMASK(25, 22),
|
|
[STATIC_MAC_TABLE_OVERRIDE] = BIT(20),
|
|
[STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(18, 16),
|
|
[DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(1, 0),
|
|
[DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(2),
|
|
[DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7),
|
|
[DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 24),
|
|
[DYNAMIC_MAC_TABLE_FID] = GENMASK(19, 16),
|
|
[DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(21, 20),
|
|
[DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(23, 22),
|
|
};
|
|
|
|
static u8 ksz8863_shifts[] = {
|
|
[VLAN_TABLE_MEMBERSHIP_S] = 16,
|
|
[STATIC_MAC_FWD_PORTS] = 16,
|
|
[STATIC_MAC_FID] = 22,
|
|
[DYNAMIC_MAC_ENTRIES_H] = 8,
|
|
[DYNAMIC_MAC_ENTRIES] = 24,
|
|
[DYNAMIC_MAC_FID] = 16,
|
|
[DYNAMIC_MAC_TIMESTAMP] = 22,
|
|
[DYNAMIC_MAC_SRC_PORT] = 20,
|
|
};
|
|
|
|
static const u16 ksz9477_regs[] = {
|
|
[P_STP_CTRL] = 0x0B04,
|
|
[S_START_CTRL] = 0x0300,
|
|
[S_BROADCAST_CTRL] = 0x0332,
|
|
[S_MULTICAST_CTRL] = 0x0331,
|
|
[P_XMII_CTRL_0] = 0x0300,
|
|
[P_XMII_CTRL_1] = 0x0301,
|
|
};
|
|
|
|
static const u32 ksz9477_masks[] = {
|
|
[ALU_STAT_WRITE] = 0,
|
|
[ALU_STAT_READ] = 1,
|
|
[P_MII_TX_FLOW_CTRL] = BIT(5),
|
|
[P_MII_RX_FLOW_CTRL] = BIT(3),
|
|
};
|
|
|
|
static const u8 ksz9477_shifts[] = {
|
|
[ALU_STAT_INDEX] = 16,
|
|
};
|
|
|
|
static const u8 ksz9477_xmii_ctrl0[] = {
|
|
[P_MII_100MBIT] = 1,
|
|
[P_MII_10MBIT] = 0,
|
|
[P_MII_FULL_DUPLEX] = 1,
|
|
[P_MII_HALF_DUPLEX] = 0,
|
|
};
|
|
|
|
static const u8 ksz9477_xmii_ctrl1[] = {
|
|
[P_RGMII_SEL] = 0,
|
|
[P_RMII_SEL] = 1,
|
|
[P_GMII_SEL] = 2,
|
|
[P_MII_SEL] = 3,
|
|
[P_GMII_1GBIT] = 0,
|
|
[P_GMII_NOT_1GBIT] = 1,
|
|
};
|
|
|
|
static const u32 lan937x_masks[] = {
|
|
[ALU_STAT_WRITE] = 1,
|
|
[ALU_STAT_READ] = 2,
|
|
[P_MII_TX_FLOW_CTRL] = BIT(5),
|
|
[P_MII_RX_FLOW_CTRL] = BIT(3),
|
|
};
|
|
|
|
static const u8 lan937x_shifts[] = {
|
|
[ALU_STAT_INDEX] = 8,
|
|
};
|
|
|
|
static const struct regmap_range ksz8563_valid_regs[] = {
|
|
regmap_reg_range(0x0000, 0x0003),
|
|
regmap_reg_range(0x0006, 0x0006),
|
|
regmap_reg_range(0x000f, 0x001f),
|
|
regmap_reg_range(0x0100, 0x0100),
|
|
regmap_reg_range(0x0104, 0x0107),
|
|
regmap_reg_range(0x010d, 0x010d),
|
|
regmap_reg_range(0x0110, 0x0113),
|
|
regmap_reg_range(0x0120, 0x012b),
|
|
regmap_reg_range(0x0201, 0x0201),
|
|
regmap_reg_range(0x0210, 0x0213),
|
|
regmap_reg_range(0x0300, 0x0300),
|
|
regmap_reg_range(0x0302, 0x031b),
|
|
regmap_reg_range(0x0320, 0x032b),
|
|
regmap_reg_range(0x0330, 0x0336),
|
|
regmap_reg_range(0x0338, 0x033e),
|
|
regmap_reg_range(0x0340, 0x035f),
|
|
regmap_reg_range(0x0370, 0x0370),
|
|
regmap_reg_range(0x0378, 0x0378),
|
|
regmap_reg_range(0x037c, 0x037d),
|
|
regmap_reg_range(0x0390, 0x0393),
|
|
regmap_reg_range(0x0400, 0x040e),
|
|
regmap_reg_range(0x0410, 0x042f),
|
|
regmap_reg_range(0x0500, 0x0519),
|
|
regmap_reg_range(0x0520, 0x054b),
|
|
regmap_reg_range(0x0550, 0x05b3),
|
|
|
|
/* port 1 */
|
|
regmap_reg_range(0x1000, 0x1001),
|
|
regmap_reg_range(0x1004, 0x100b),
|
|
regmap_reg_range(0x1013, 0x1013),
|
|
regmap_reg_range(0x1017, 0x1017),
|
|
regmap_reg_range(0x101b, 0x101b),
|
|
regmap_reg_range(0x101f, 0x1021),
|
|
regmap_reg_range(0x1030, 0x1030),
|
|
regmap_reg_range(0x1100, 0x1111),
|
|
regmap_reg_range(0x111a, 0x111d),
|
|
regmap_reg_range(0x1122, 0x1127),
|
|
regmap_reg_range(0x112a, 0x112b),
|
|
regmap_reg_range(0x1136, 0x1139),
|
|
regmap_reg_range(0x113e, 0x113f),
|
|
regmap_reg_range(0x1400, 0x1401),
|
|
regmap_reg_range(0x1403, 0x1403),
|
|
regmap_reg_range(0x1410, 0x1417),
|
|
regmap_reg_range(0x1420, 0x1423),
|
|
regmap_reg_range(0x1500, 0x1507),
|
|
regmap_reg_range(0x1600, 0x1612),
|
|
regmap_reg_range(0x1800, 0x180f),
|
|
regmap_reg_range(0x1900, 0x1907),
|
|
regmap_reg_range(0x1914, 0x191b),
|
|
regmap_reg_range(0x1a00, 0x1a03),
|
|
regmap_reg_range(0x1a04, 0x1a08),
|
|
regmap_reg_range(0x1b00, 0x1b01),
|
|
regmap_reg_range(0x1b04, 0x1b04),
|
|
regmap_reg_range(0x1c00, 0x1c05),
|
|
regmap_reg_range(0x1c08, 0x1c1b),
|
|
|
|
/* port 2 */
|
|
regmap_reg_range(0x2000, 0x2001),
|
|
regmap_reg_range(0x2004, 0x200b),
|
|
regmap_reg_range(0x2013, 0x2013),
|
|
regmap_reg_range(0x2017, 0x2017),
|
|
regmap_reg_range(0x201b, 0x201b),
|
|
regmap_reg_range(0x201f, 0x2021),
|
|
regmap_reg_range(0x2030, 0x2030),
|
|
regmap_reg_range(0x2100, 0x2111),
|
|
regmap_reg_range(0x211a, 0x211d),
|
|
regmap_reg_range(0x2122, 0x2127),
|
|
regmap_reg_range(0x212a, 0x212b),
|
|
regmap_reg_range(0x2136, 0x2139),
|
|
regmap_reg_range(0x213e, 0x213f),
|
|
regmap_reg_range(0x2400, 0x2401),
|
|
regmap_reg_range(0x2403, 0x2403),
|
|
regmap_reg_range(0x2410, 0x2417),
|
|
regmap_reg_range(0x2420, 0x2423),
|
|
regmap_reg_range(0x2500, 0x2507),
|
|
regmap_reg_range(0x2600, 0x2612),
|
|
regmap_reg_range(0x2800, 0x280f),
|
|
regmap_reg_range(0x2900, 0x2907),
|
|
regmap_reg_range(0x2914, 0x291b),
|
|
regmap_reg_range(0x2a00, 0x2a03),
|
|
regmap_reg_range(0x2a04, 0x2a08),
|
|
regmap_reg_range(0x2b00, 0x2b01),
|
|
regmap_reg_range(0x2b04, 0x2b04),
|
|
regmap_reg_range(0x2c00, 0x2c05),
|
|
regmap_reg_range(0x2c08, 0x2c1b),
|
|
|
|
/* port 3 */
|
|
regmap_reg_range(0x3000, 0x3001),
|
|
regmap_reg_range(0x3004, 0x300b),
|
|
regmap_reg_range(0x3013, 0x3013),
|
|
regmap_reg_range(0x3017, 0x3017),
|
|
regmap_reg_range(0x301b, 0x301b),
|
|
regmap_reg_range(0x301f, 0x3021),
|
|
regmap_reg_range(0x3030, 0x3030),
|
|
regmap_reg_range(0x3300, 0x3301),
|
|
regmap_reg_range(0x3303, 0x3303),
|
|
regmap_reg_range(0x3400, 0x3401),
|
|
regmap_reg_range(0x3403, 0x3403),
|
|
regmap_reg_range(0x3410, 0x3417),
|
|
regmap_reg_range(0x3420, 0x3423),
|
|
regmap_reg_range(0x3500, 0x3507),
|
|
regmap_reg_range(0x3600, 0x3612),
|
|
regmap_reg_range(0x3800, 0x380f),
|
|
regmap_reg_range(0x3900, 0x3907),
|
|
regmap_reg_range(0x3914, 0x391b),
|
|
regmap_reg_range(0x3a00, 0x3a03),
|
|
regmap_reg_range(0x3a04, 0x3a08),
|
|
regmap_reg_range(0x3b00, 0x3b01),
|
|
regmap_reg_range(0x3b04, 0x3b04),
|
|
regmap_reg_range(0x3c00, 0x3c05),
|
|
regmap_reg_range(0x3c08, 0x3c1b),
|
|
};
|
|
|
|
static const struct regmap_access_table ksz8563_register_set = {
|
|
.yes_ranges = ksz8563_valid_regs,
|
|
.n_yes_ranges = ARRAY_SIZE(ksz8563_valid_regs),
|
|
};
|
|
|
|
static const struct regmap_range ksz9477_valid_regs[] = {
|
|
regmap_reg_range(0x0000, 0x0003),
|
|
regmap_reg_range(0x0006, 0x0006),
|
|
regmap_reg_range(0x0010, 0x001f),
|
|
regmap_reg_range(0x0100, 0x0100),
|
|
regmap_reg_range(0x0103, 0x0107),
|
|
regmap_reg_range(0x010d, 0x010d),
|
|
regmap_reg_range(0x0110, 0x0113),
|
|
regmap_reg_range(0x0120, 0x012b),
|
|
regmap_reg_range(0x0201, 0x0201),
|
|
regmap_reg_range(0x0210, 0x0213),
|
|
regmap_reg_range(0x0300, 0x0300),
|
|
regmap_reg_range(0x0302, 0x031b),
|
|
regmap_reg_range(0x0320, 0x032b),
|
|
regmap_reg_range(0x0330, 0x0336),
|
|
regmap_reg_range(0x0338, 0x033b),
|
|
regmap_reg_range(0x033e, 0x033e),
|
|
regmap_reg_range(0x0340, 0x035f),
|
|
regmap_reg_range(0x0370, 0x0370),
|
|
regmap_reg_range(0x0378, 0x0378),
|
|
regmap_reg_range(0x037c, 0x037d),
|
|
regmap_reg_range(0x0390, 0x0393),
|
|
regmap_reg_range(0x0400, 0x040e),
|
|
regmap_reg_range(0x0410, 0x042f),
|
|
regmap_reg_range(0x0444, 0x044b),
|
|
regmap_reg_range(0x0450, 0x046f),
|
|
regmap_reg_range(0x0500, 0x0519),
|
|
regmap_reg_range(0x0520, 0x054b),
|
|
regmap_reg_range(0x0550, 0x05b3),
|
|
regmap_reg_range(0x0604, 0x060b),
|
|
regmap_reg_range(0x0610, 0x0612),
|
|
regmap_reg_range(0x0614, 0x062c),
|
|
regmap_reg_range(0x0640, 0x0645),
|
|
regmap_reg_range(0x0648, 0x064d),
|
|
|
|
/* port 1 */
|
|
regmap_reg_range(0x1000, 0x1001),
|
|
regmap_reg_range(0x1013, 0x1013),
|
|
regmap_reg_range(0x1017, 0x1017),
|
|
regmap_reg_range(0x101b, 0x101b),
|
|
regmap_reg_range(0x101f, 0x1020),
|
|
regmap_reg_range(0x1030, 0x1030),
|
|
regmap_reg_range(0x1100, 0x1115),
|
|
regmap_reg_range(0x111a, 0x111f),
|
|
regmap_reg_range(0x1122, 0x1127),
|
|
regmap_reg_range(0x112a, 0x112b),
|
|
regmap_reg_range(0x1136, 0x1139),
|
|
regmap_reg_range(0x113e, 0x113f),
|
|
regmap_reg_range(0x1400, 0x1401),
|
|
regmap_reg_range(0x1403, 0x1403),
|
|
regmap_reg_range(0x1410, 0x1417),
|
|
regmap_reg_range(0x1420, 0x1423),
|
|
regmap_reg_range(0x1500, 0x1507),
|
|
regmap_reg_range(0x1600, 0x1613),
|
|
regmap_reg_range(0x1800, 0x180f),
|
|
regmap_reg_range(0x1820, 0x1827),
|
|
regmap_reg_range(0x1830, 0x1837),
|
|
regmap_reg_range(0x1840, 0x184b),
|
|
regmap_reg_range(0x1900, 0x1907),
|
|
regmap_reg_range(0x1914, 0x191b),
|
|
regmap_reg_range(0x1920, 0x1920),
|
|
regmap_reg_range(0x1923, 0x1927),
|
|
regmap_reg_range(0x1a00, 0x1a03),
|
|
regmap_reg_range(0x1a04, 0x1a07),
|
|
regmap_reg_range(0x1b00, 0x1b01),
|
|
regmap_reg_range(0x1b04, 0x1b04),
|
|
regmap_reg_range(0x1c00, 0x1c05),
|
|
regmap_reg_range(0x1c08, 0x1c1b),
|
|
|
|
/* port 2 */
|
|
regmap_reg_range(0x2000, 0x2001),
|
|
regmap_reg_range(0x2013, 0x2013),
|
|
regmap_reg_range(0x2017, 0x2017),
|
|
regmap_reg_range(0x201b, 0x201b),
|
|
regmap_reg_range(0x201f, 0x2020),
|
|
regmap_reg_range(0x2030, 0x2030),
|
|
regmap_reg_range(0x2100, 0x2115),
|
|
regmap_reg_range(0x211a, 0x211f),
|
|
regmap_reg_range(0x2122, 0x2127),
|
|
regmap_reg_range(0x212a, 0x212b),
|
|
regmap_reg_range(0x2136, 0x2139),
|
|
regmap_reg_range(0x213e, 0x213f),
|
|
regmap_reg_range(0x2400, 0x2401),
|
|
regmap_reg_range(0x2403, 0x2403),
|
|
regmap_reg_range(0x2410, 0x2417),
|
|
regmap_reg_range(0x2420, 0x2423),
|
|
regmap_reg_range(0x2500, 0x2507),
|
|
regmap_reg_range(0x2600, 0x2613),
|
|
regmap_reg_range(0x2800, 0x280f),
|
|
regmap_reg_range(0x2820, 0x2827),
|
|
regmap_reg_range(0x2830, 0x2837),
|
|
regmap_reg_range(0x2840, 0x284b),
|
|
regmap_reg_range(0x2900, 0x2907),
|
|
regmap_reg_range(0x2914, 0x291b),
|
|
regmap_reg_range(0x2920, 0x2920),
|
|
regmap_reg_range(0x2923, 0x2927),
|
|
regmap_reg_range(0x2a00, 0x2a03),
|
|
regmap_reg_range(0x2a04, 0x2a07),
|
|
regmap_reg_range(0x2b00, 0x2b01),
|
|
regmap_reg_range(0x2b04, 0x2b04),
|
|
regmap_reg_range(0x2c00, 0x2c05),
|
|
regmap_reg_range(0x2c08, 0x2c1b),
|
|
|
|
/* port 3 */
|
|
regmap_reg_range(0x3000, 0x3001),
|
|
regmap_reg_range(0x3013, 0x3013),
|
|
regmap_reg_range(0x3017, 0x3017),
|
|
regmap_reg_range(0x301b, 0x301b),
|
|
regmap_reg_range(0x301f, 0x3020),
|
|
regmap_reg_range(0x3030, 0x3030),
|
|
regmap_reg_range(0x3100, 0x3115),
|
|
regmap_reg_range(0x311a, 0x311f),
|
|
regmap_reg_range(0x3122, 0x3127),
|
|
regmap_reg_range(0x312a, 0x312b),
|
|
regmap_reg_range(0x3136, 0x3139),
|
|
regmap_reg_range(0x313e, 0x313f),
|
|
regmap_reg_range(0x3400, 0x3401),
|
|
regmap_reg_range(0x3403, 0x3403),
|
|
regmap_reg_range(0x3410, 0x3417),
|
|
regmap_reg_range(0x3420, 0x3423),
|
|
regmap_reg_range(0x3500, 0x3507),
|
|
regmap_reg_range(0x3600, 0x3613),
|
|
regmap_reg_range(0x3800, 0x380f),
|
|
regmap_reg_range(0x3820, 0x3827),
|
|
regmap_reg_range(0x3830, 0x3837),
|
|
regmap_reg_range(0x3840, 0x384b),
|
|
regmap_reg_range(0x3900, 0x3907),
|
|
regmap_reg_range(0x3914, 0x391b),
|
|
regmap_reg_range(0x3920, 0x3920),
|
|
regmap_reg_range(0x3923, 0x3927),
|
|
regmap_reg_range(0x3a00, 0x3a03),
|
|
regmap_reg_range(0x3a04, 0x3a07),
|
|
regmap_reg_range(0x3b00, 0x3b01),
|
|
regmap_reg_range(0x3b04, 0x3b04),
|
|
regmap_reg_range(0x3c00, 0x3c05),
|
|
regmap_reg_range(0x3c08, 0x3c1b),
|
|
|
|
/* port 4 */
|
|
regmap_reg_range(0x4000, 0x4001),
|
|
regmap_reg_range(0x4013, 0x4013),
|
|
regmap_reg_range(0x4017, 0x4017),
|
|
regmap_reg_range(0x401b, 0x401b),
|
|
regmap_reg_range(0x401f, 0x4020),
|
|
regmap_reg_range(0x4030, 0x4030),
|
|
regmap_reg_range(0x4100, 0x4115),
|
|
regmap_reg_range(0x411a, 0x411f),
|
|
regmap_reg_range(0x4122, 0x4127),
|
|
regmap_reg_range(0x412a, 0x412b),
|
|
regmap_reg_range(0x4136, 0x4139),
|
|
regmap_reg_range(0x413e, 0x413f),
|
|
regmap_reg_range(0x4400, 0x4401),
|
|
regmap_reg_range(0x4403, 0x4403),
|
|
regmap_reg_range(0x4410, 0x4417),
|
|
regmap_reg_range(0x4420, 0x4423),
|
|
regmap_reg_range(0x4500, 0x4507),
|
|
regmap_reg_range(0x4600, 0x4613),
|
|
regmap_reg_range(0x4800, 0x480f),
|
|
regmap_reg_range(0x4820, 0x4827),
|
|
regmap_reg_range(0x4830, 0x4837),
|
|
regmap_reg_range(0x4840, 0x484b),
|
|
regmap_reg_range(0x4900, 0x4907),
|
|
regmap_reg_range(0x4914, 0x491b),
|
|
regmap_reg_range(0x4920, 0x4920),
|
|
regmap_reg_range(0x4923, 0x4927),
|
|
regmap_reg_range(0x4a00, 0x4a03),
|
|
regmap_reg_range(0x4a04, 0x4a07),
|
|
regmap_reg_range(0x4b00, 0x4b01),
|
|
regmap_reg_range(0x4b04, 0x4b04),
|
|
regmap_reg_range(0x4c00, 0x4c05),
|
|
regmap_reg_range(0x4c08, 0x4c1b),
|
|
|
|
/* port 5 */
|
|
regmap_reg_range(0x5000, 0x5001),
|
|
regmap_reg_range(0x5013, 0x5013),
|
|
regmap_reg_range(0x5017, 0x5017),
|
|
regmap_reg_range(0x501b, 0x501b),
|
|
regmap_reg_range(0x501f, 0x5020),
|
|
regmap_reg_range(0x5030, 0x5030),
|
|
regmap_reg_range(0x5100, 0x5115),
|
|
regmap_reg_range(0x511a, 0x511f),
|
|
regmap_reg_range(0x5122, 0x5127),
|
|
regmap_reg_range(0x512a, 0x512b),
|
|
regmap_reg_range(0x5136, 0x5139),
|
|
regmap_reg_range(0x513e, 0x513f),
|
|
regmap_reg_range(0x5400, 0x5401),
|
|
regmap_reg_range(0x5403, 0x5403),
|
|
regmap_reg_range(0x5410, 0x5417),
|
|
regmap_reg_range(0x5420, 0x5423),
|
|
regmap_reg_range(0x5500, 0x5507),
|
|
regmap_reg_range(0x5600, 0x5613),
|
|
regmap_reg_range(0x5800, 0x580f),
|
|
regmap_reg_range(0x5820, 0x5827),
|
|
regmap_reg_range(0x5830, 0x5837),
|
|
regmap_reg_range(0x5840, 0x584b),
|
|
regmap_reg_range(0x5900, 0x5907),
|
|
regmap_reg_range(0x5914, 0x591b),
|
|
regmap_reg_range(0x5920, 0x5920),
|
|
regmap_reg_range(0x5923, 0x5927),
|
|
regmap_reg_range(0x5a00, 0x5a03),
|
|
regmap_reg_range(0x5a04, 0x5a07),
|
|
regmap_reg_range(0x5b00, 0x5b01),
|
|
regmap_reg_range(0x5b04, 0x5b04),
|
|
regmap_reg_range(0x5c00, 0x5c05),
|
|
regmap_reg_range(0x5c08, 0x5c1b),
|
|
|
|
/* port 6 */
|
|
regmap_reg_range(0x6000, 0x6001),
|
|
regmap_reg_range(0x6013, 0x6013),
|
|
regmap_reg_range(0x6017, 0x6017),
|
|
regmap_reg_range(0x601b, 0x601b),
|
|
regmap_reg_range(0x601f, 0x6020),
|
|
regmap_reg_range(0x6030, 0x6030),
|
|
regmap_reg_range(0x6300, 0x6301),
|
|
regmap_reg_range(0x6400, 0x6401),
|
|
regmap_reg_range(0x6403, 0x6403),
|
|
regmap_reg_range(0x6410, 0x6417),
|
|
regmap_reg_range(0x6420, 0x6423),
|
|
regmap_reg_range(0x6500, 0x6507),
|
|
regmap_reg_range(0x6600, 0x6613),
|
|
regmap_reg_range(0x6800, 0x680f),
|
|
regmap_reg_range(0x6820, 0x6827),
|
|
regmap_reg_range(0x6830, 0x6837),
|
|
regmap_reg_range(0x6840, 0x684b),
|
|
regmap_reg_range(0x6900, 0x6907),
|
|
regmap_reg_range(0x6914, 0x691b),
|
|
regmap_reg_range(0x6920, 0x6920),
|
|
regmap_reg_range(0x6923, 0x6927),
|
|
regmap_reg_range(0x6a00, 0x6a03),
|
|
regmap_reg_range(0x6a04, 0x6a07),
|
|
regmap_reg_range(0x6b00, 0x6b01),
|
|
regmap_reg_range(0x6b04, 0x6b04),
|
|
regmap_reg_range(0x6c00, 0x6c05),
|
|
regmap_reg_range(0x6c08, 0x6c1b),
|
|
|
|
/* port 7 */
|
|
regmap_reg_range(0x7000, 0x7001),
|
|
regmap_reg_range(0x7013, 0x7013),
|
|
regmap_reg_range(0x7017, 0x7017),
|
|
regmap_reg_range(0x701b, 0x701b),
|
|
regmap_reg_range(0x701f, 0x7020),
|
|
regmap_reg_range(0x7030, 0x7030),
|
|
regmap_reg_range(0x7200, 0x7203),
|
|
regmap_reg_range(0x7206, 0x7207),
|
|
regmap_reg_range(0x7300, 0x7301),
|
|
regmap_reg_range(0x7400, 0x7401),
|
|
regmap_reg_range(0x7403, 0x7403),
|
|
regmap_reg_range(0x7410, 0x7417),
|
|
regmap_reg_range(0x7420, 0x7423),
|
|
regmap_reg_range(0x7500, 0x7507),
|
|
regmap_reg_range(0x7600, 0x7613),
|
|
regmap_reg_range(0x7800, 0x780f),
|
|
regmap_reg_range(0x7820, 0x7827),
|
|
regmap_reg_range(0x7830, 0x7837),
|
|
regmap_reg_range(0x7840, 0x784b),
|
|
regmap_reg_range(0x7900, 0x7907),
|
|
regmap_reg_range(0x7914, 0x791b),
|
|
regmap_reg_range(0x7920, 0x7920),
|
|
regmap_reg_range(0x7923, 0x7927),
|
|
regmap_reg_range(0x7a00, 0x7a03),
|
|
regmap_reg_range(0x7a04, 0x7a07),
|
|
regmap_reg_range(0x7b00, 0x7b01),
|
|
regmap_reg_range(0x7b04, 0x7b04),
|
|
regmap_reg_range(0x7c00, 0x7c05),
|
|
regmap_reg_range(0x7c08, 0x7c1b),
|
|
};
|
|
|
|
static const struct regmap_access_table ksz9477_register_set = {
|
|
.yes_ranges = ksz9477_valid_regs,
|
|
.n_yes_ranges = ARRAY_SIZE(ksz9477_valid_regs),
|
|
};
|
|
|
|
static const struct regmap_range ksz9896_valid_regs[] = {
|
|
regmap_reg_range(0x0000, 0x0003),
|
|
regmap_reg_range(0x0006, 0x0006),
|
|
regmap_reg_range(0x0010, 0x001f),
|
|
regmap_reg_range(0x0100, 0x0100),
|
|
regmap_reg_range(0x0103, 0x0107),
|
|
regmap_reg_range(0x010d, 0x010d),
|
|
regmap_reg_range(0x0110, 0x0113),
|
|
regmap_reg_range(0x0120, 0x0127),
|
|
regmap_reg_range(0x0201, 0x0201),
|
|
regmap_reg_range(0x0210, 0x0213),
|
|
regmap_reg_range(0x0300, 0x0300),
|
|
regmap_reg_range(0x0302, 0x030b),
|
|
regmap_reg_range(0x0310, 0x031b),
|
|
regmap_reg_range(0x0320, 0x032b),
|
|
regmap_reg_range(0x0330, 0x0336),
|
|
regmap_reg_range(0x0338, 0x033b),
|
|
regmap_reg_range(0x033e, 0x033e),
|
|
regmap_reg_range(0x0340, 0x035f),
|
|
regmap_reg_range(0x0370, 0x0370),
|
|
regmap_reg_range(0x0378, 0x0378),
|
|
regmap_reg_range(0x037c, 0x037d),
|
|
regmap_reg_range(0x0390, 0x0393),
|
|
regmap_reg_range(0x0400, 0x040e),
|
|
regmap_reg_range(0x0410, 0x042f),
|
|
|
|
/* port 1 */
|
|
regmap_reg_range(0x1000, 0x1001),
|
|
regmap_reg_range(0x1013, 0x1013),
|
|
regmap_reg_range(0x1017, 0x1017),
|
|
regmap_reg_range(0x101b, 0x101b),
|
|
regmap_reg_range(0x101f, 0x1020),
|
|
regmap_reg_range(0x1030, 0x1030),
|
|
regmap_reg_range(0x1100, 0x1115),
|
|
regmap_reg_range(0x111a, 0x111f),
|
|
regmap_reg_range(0x1122, 0x1127),
|
|
regmap_reg_range(0x112a, 0x112b),
|
|
regmap_reg_range(0x1136, 0x1139),
|
|
regmap_reg_range(0x113e, 0x113f),
|
|
regmap_reg_range(0x1400, 0x1401),
|
|
regmap_reg_range(0x1403, 0x1403),
|
|
regmap_reg_range(0x1410, 0x1417),
|
|
regmap_reg_range(0x1420, 0x1423),
|
|
regmap_reg_range(0x1500, 0x1507),
|
|
regmap_reg_range(0x1600, 0x1612),
|
|
regmap_reg_range(0x1800, 0x180f),
|
|
regmap_reg_range(0x1820, 0x1827),
|
|
regmap_reg_range(0x1830, 0x1837),
|
|
regmap_reg_range(0x1840, 0x184b),
|
|
regmap_reg_range(0x1900, 0x1907),
|
|
regmap_reg_range(0x1914, 0x1915),
|
|
regmap_reg_range(0x1a00, 0x1a03),
|
|
regmap_reg_range(0x1a04, 0x1a07),
|
|
regmap_reg_range(0x1b00, 0x1b01),
|
|
regmap_reg_range(0x1b04, 0x1b04),
|
|
|
|
/* port 2 */
|
|
regmap_reg_range(0x2000, 0x2001),
|
|
regmap_reg_range(0x2013, 0x2013),
|
|
regmap_reg_range(0x2017, 0x2017),
|
|
regmap_reg_range(0x201b, 0x201b),
|
|
regmap_reg_range(0x201f, 0x2020),
|
|
regmap_reg_range(0x2030, 0x2030),
|
|
regmap_reg_range(0x2100, 0x2115),
|
|
regmap_reg_range(0x211a, 0x211f),
|
|
regmap_reg_range(0x2122, 0x2127),
|
|
regmap_reg_range(0x212a, 0x212b),
|
|
regmap_reg_range(0x2136, 0x2139),
|
|
regmap_reg_range(0x213e, 0x213f),
|
|
regmap_reg_range(0x2400, 0x2401),
|
|
regmap_reg_range(0x2403, 0x2403),
|
|
regmap_reg_range(0x2410, 0x2417),
|
|
regmap_reg_range(0x2420, 0x2423),
|
|
regmap_reg_range(0x2500, 0x2507),
|
|
regmap_reg_range(0x2600, 0x2612),
|
|
regmap_reg_range(0x2800, 0x280f),
|
|
regmap_reg_range(0x2820, 0x2827),
|
|
regmap_reg_range(0x2830, 0x2837),
|
|
regmap_reg_range(0x2840, 0x284b),
|
|
regmap_reg_range(0x2900, 0x2907),
|
|
regmap_reg_range(0x2914, 0x2915),
|
|
regmap_reg_range(0x2a00, 0x2a03),
|
|
regmap_reg_range(0x2a04, 0x2a07),
|
|
regmap_reg_range(0x2b00, 0x2b01),
|
|
regmap_reg_range(0x2b04, 0x2b04),
|
|
|
|
/* port 3 */
|
|
regmap_reg_range(0x3000, 0x3001),
|
|
regmap_reg_range(0x3013, 0x3013),
|
|
regmap_reg_range(0x3017, 0x3017),
|
|
regmap_reg_range(0x301b, 0x301b),
|
|
regmap_reg_range(0x301f, 0x3020),
|
|
regmap_reg_range(0x3030, 0x3030),
|
|
regmap_reg_range(0x3100, 0x3115),
|
|
regmap_reg_range(0x311a, 0x311f),
|
|
regmap_reg_range(0x3122, 0x3127),
|
|
regmap_reg_range(0x312a, 0x312b),
|
|
regmap_reg_range(0x3136, 0x3139),
|
|
regmap_reg_range(0x313e, 0x313f),
|
|
regmap_reg_range(0x3400, 0x3401),
|
|
regmap_reg_range(0x3403, 0x3403),
|
|
regmap_reg_range(0x3410, 0x3417),
|
|
regmap_reg_range(0x3420, 0x3423),
|
|
regmap_reg_range(0x3500, 0x3507),
|
|
regmap_reg_range(0x3600, 0x3612),
|
|
regmap_reg_range(0x3800, 0x380f),
|
|
regmap_reg_range(0x3820, 0x3827),
|
|
regmap_reg_range(0x3830, 0x3837),
|
|
regmap_reg_range(0x3840, 0x384b),
|
|
regmap_reg_range(0x3900, 0x3907),
|
|
regmap_reg_range(0x3914, 0x3915),
|
|
regmap_reg_range(0x3a00, 0x3a03),
|
|
regmap_reg_range(0x3a04, 0x3a07),
|
|
regmap_reg_range(0x3b00, 0x3b01),
|
|
regmap_reg_range(0x3b04, 0x3b04),
|
|
|
|
/* port 4 */
|
|
regmap_reg_range(0x4000, 0x4001),
|
|
regmap_reg_range(0x4013, 0x4013),
|
|
regmap_reg_range(0x4017, 0x4017),
|
|
regmap_reg_range(0x401b, 0x401b),
|
|
regmap_reg_range(0x401f, 0x4020),
|
|
regmap_reg_range(0x4030, 0x4030),
|
|
regmap_reg_range(0x4100, 0x4115),
|
|
regmap_reg_range(0x411a, 0x411f),
|
|
regmap_reg_range(0x4122, 0x4127),
|
|
regmap_reg_range(0x412a, 0x412b),
|
|
regmap_reg_range(0x4136, 0x4139),
|
|
regmap_reg_range(0x413e, 0x413f),
|
|
regmap_reg_range(0x4400, 0x4401),
|
|
regmap_reg_range(0x4403, 0x4403),
|
|
regmap_reg_range(0x4410, 0x4417),
|
|
regmap_reg_range(0x4420, 0x4423),
|
|
regmap_reg_range(0x4500, 0x4507),
|
|
regmap_reg_range(0x4600, 0x4612),
|
|
regmap_reg_range(0x4800, 0x480f),
|
|
regmap_reg_range(0x4820, 0x4827),
|
|
regmap_reg_range(0x4830, 0x4837),
|
|
regmap_reg_range(0x4840, 0x484b),
|
|
regmap_reg_range(0x4900, 0x4907),
|
|
regmap_reg_range(0x4914, 0x4915),
|
|
regmap_reg_range(0x4a00, 0x4a03),
|
|
regmap_reg_range(0x4a04, 0x4a07),
|
|
regmap_reg_range(0x4b00, 0x4b01),
|
|
regmap_reg_range(0x4b04, 0x4b04),
|
|
|
|
/* port 5 */
|
|
regmap_reg_range(0x5000, 0x5001),
|
|
regmap_reg_range(0x5013, 0x5013),
|
|
regmap_reg_range(0x5017, 0x5017),
|
|
regmap_reg_range(0x501b, 0x501b),
|
|
regmap_reg_range(0x501f, 0x5020),
|
|
regmap_reg_range(0x5030, 0x5030),
|
|
regmap_reg_range(0x5100, 0x5115),
|
|
regmap_reg_range(0x511a, 0x511f),
|
|
regmap_reg_range(0x5122, 0x5127),
|
|
regmap_reg_range(0x512a, 0x512b),
|
|
regmap_reg_range(0x5136, 0x5139),
|
|
regmap_reg_range(0x513e, 0x513f),
|
|
regmap_reg_range(0x5400, 0x5401),
|
|
regmap_reg_range(0x5403, 0x5403),
|
|
regmap_reg_range(0x5410, 0x5417),
|
|
regmap_reg_range(0x5420, 0x5423),
|
|
regmap_reg_range(0x5500, 0x5507),
|
|
regmap_reg_range(0x5600, 0x5612),
|
|
regmap_reg_range(0x5800, 0x580f),
|
|
regmap_reg_range(0x5820, 0x5827),
|
|
regmap_reg_range(0x5830, 0x5837),
|
|
regmap_reg_range(0x5840, 0x584b),
|
|
regmap_reg_range(0x5900, 0x5907),
|
|
regmap_reg_range(0x5914, 0x5915),
|
|
regmap_reg_range(0x5a00, 0x5a03),
|
|
regmap_reg_range(0x5a04, 0x5a07),
|
|
regmap_reg_range(0x5b00, 0x5b01),
|
|
regmap_reg_range(0x5b04, 0x5b04),
|
|
|
|
/* port 6 */
|
|
regmap_reg_range(0x6000, 0x6001),
|
|
regmap_reg_range(0x6013, 0x6013),
|
|
regmap_reg_range(0x6017, 0x6017),
|
|
regmap_reg_range(0x601b, 0x601b),
|
|
regmap_reg_range(0x601f, 0x6020),
|
|
regmap_reg_range(0x6030, 0x6030),
|
|
regmap_reg_range(0x6100, 0x6115),
|
|
regmap_reg_range(0x611a, 0x611f),
|
|
regmap_reg_range(0x6122, 0x6127),
|
|
regmap_reg_range(0x612a, 0x612b),
|
|
regmap_reg_range(0x6136, 0x6139),
|
|
regmap_reg_range(0x613e, 0x613f),
|
|
regmap_reg_range(0x6300, 0x6301),
|
|
regmap_reg_range(0x6400, 0x6401),
|
|
regmap_reg_range(0x6403, 0x6403),
|
|
regmap_reg_range(0x6410, 0x6417),
|
|
regmap_reg_range(0x6420, 0x6423),
|
|
regmap_reg_range(0x6500, 0x6507),
|
|
regmap_reg_range(0x6600, 0x6612),
|
|
regmap_reg_range(0x6800, 0x680f),
|
|
regmap_reg_range(0x6820, 0x6827),
|
|
regmap_reg_range(0x6830, 0x6837),
|
|
regmap_reg_range(0x6840, 0x684b),
|
|
regmap_reg_range(0x6900, 0x6907),
|
|
regmap_reg_range(0x6914, 0x6915),
|
|
regmap_reg_range(0x6a00, 0x6a03),
|
|
regmap_reg_range(0x6a04, 0x6a07),
|
|
regmap_reg_range(0x6b00, 0x6b01),
|
|
regmap_reg_range(0x6b04, 0x6b04),
|
|
};
|
|
|
|
static const struct regmap_access_table ksz9896_register_set = {
|
|
.yes_ranges = ksz9896_valid_regs,
|
|
.n_yes_ranges = ARRAY_SIZE(ksz9896_valid_regs),
|
|
};
|
|
|
|
const struct ksz_chip_data ksz_switch_chips[] = {
|
|
[KSZ8563] = {
|
|
.chip_id = KSZ8563_CHIP_ID,
|
|
.dev_name = "KSZ8563",
|
|
.num_vlans = 4096,
|
|
.num_alus = 4096,
|
|
.num_statics = 16,
|
|
.cpu_ports = 0x07, /* can be configured as cpu port */
|
|
.port_cnt = 3, /* total port count */
|
|
.port_nirqs = 3,
|
|
.num_tx_queues = 4,
|
|
.tc_cbs_supported = true,
|
|
.tc_ets_supported = true,
|
|
.ops = &ksz9477_dev_ops,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = ksz9477_masks,
|
|
.shifts = ksz9477_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
|
|
.supports_mii = {false, false, true},
|
|
.supports_rmii = {false, false, true},
|
|
.supports_rgmii = {false, false, true},
|
|
.internal_phy = {true, true, false},
|
|
.gbit_capable = {false, false, true},
|
|
.wr_table = &ksz8563_register_set,
|
|
.rd_table = &ksz8563_register_set,
|
|
},
|
|
|
|
[KSZ8795] = {
|
|
.chip_id = KSZ8795_CHIP_ID,
|
|
.dev_name = "KSZ8795",
|
|
.num_vlans = 4096,
|
|
.num_alus = 0,
|
|
.num_statics = 8,
|
|
.cpu_ports = 0x10, /* can be configured as cpu port */
|
|
.port_cnt = 5, /* total cpu and user ports */
|
|
.num_tx_queues = 4,
|
|
.ops = &ksz8_dev_ops,
|
|
.ksz87xx_eee_link_erratum = true,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz8795_regs,
|
|
.masks = ksz8795_masks,
|
|
.shifts = ksz8795_shifts,
|
|
.xmii_ctrl0 = ksz8795_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz8795_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false, true},
|
|
.supports_rmii = {false, false, false, false, true},
|
|
.supports_rgmii = {false, false, false, false, true},
|
|
.internal_phy = {true, true, true, true, false},
|
|
},
|
|
|
|
[KSZ8794] = {
|
|
/* WARNING
|
|
* =======
|
|
* KSZ8794 is similar to KSZ8795, except the port map
|
|
* contains a gap between external and CPU ports, the
|
|
* port map is NOT continuous. The per-port register
|
|
* map is shifted accordingly too, i.e. registers at
|
|
* offset 0x40 are NOT used on KSZ8794 and they ARE
|
|
* used on KSZ8795 for external port 3.
|
|
* external cpu
|
|
* KSZ8794 0,1,2 4
|
|
* KSZ8795 0,1,2,3 4
|
|
* KSZ8765 0,1,2,3 4
|
|
* port_cnt is configured as 5, even though it is 4
|
|
*/
|
|
.chip_id = KSZ8794_CHIP_ID,
|
|
.dev_name = "KSZ8794",
|
|
.num_vlans = 4096,
|
|
.num_alus = 0,
|
|
.num_statics = 8,
|
|
.cpu_ports = 0x10, /* can be configured as cpu port */
|
|
.port_cnt = 5, /* total cpu and user ports */
|
|
.num_tx_queues = 4,
|
|
.ops = &ksz8_dev_ops,
|
|
.ksz87xx_eee_link_erratum = true,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz8795_regs,
|
|
.masks = ksz8795_masks,
|
|
.shifts = ksz8795_shifts,
|
|
.xmii_ctrl0 = ksz8795_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz8795_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false, true},
|
|
.supports_rmii = {false, false, false, false, true},
|
|
.supports_rgmii = {false, false, false, false, true},
|
|
.internal_phy = {true, true, true, false, false},
|
|
},
|
|
|
|
[KSZ8765] = {
|
|
.chip_id = KSZ8765_CHIP_ID,
|
|
.dev_name = "KSZ8765",
|
|
.num_vlans = 4096,
|
|
.num_alus = 0,
|
|
.num_statics = 8,
|
|
.cpu_ports = 0x10, /* can be configured as cpu port */
|
|
.port_cnt = 5, /* total cpu and user ports */
|
|
.num_tx_queues = 4,
|
|
.ops = &ksz8_dev_ops,
|
|
.ksz87xx_eee_link_erratum = true,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz8795_regs,
|
|
.masks = ksz8795_masks,
|
|
.shifts = ksz8795_shifts,
|
|
.xmii_ctrl0 = ksz8795_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz8795_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false, true},
|
|
.supports_rmii = {false, false, false, false, true},
|
|
.supports_rgmii = {false, false, false, false, true},
|
|
.internal_phy = {true, true, true, true, false},
|
|
},
|
|
|
|
[KSZ8830] = {
|
|
.chip_id = KSZ8830_CHIP_ID,
|
|
.dev_name = "KSZ8863/KSZ8873",
|
|
.num_vlans = 16,
|
|
.num_alus = 0,
|
|
.num_statics = 8,
|
|
.cpu_ports = 0x4, /* can be configured as cpu port */
|
|
.port_cnt = 3,
|
|
.num_tx_queues = 4,
|
|
.ops = &ksz8_dev_ops,
|
|
.mib_names = ksz88xx_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz8863_regs,
|
|
.masks = ksz8863_masks,
|
|
.shifts = ksz8863_shifts,
|
|
.supports_mii = {false, false, true},
|
|
.supports_rmii = {false, false, true},
|
|
.internal_phy = {true, true, false},
|
|
},
|
|
|
|
[KSZ9477] = {
|
|
.chip_id = KSZ9477_CHIP_ID,
|
|
.dev_name = "KSZ9477",
|
|
.num_vlans = 4096,
|
|
.num_alus = 4096,
|
|
.num_statics = 16,
|
|
.cpu_ports = 0x7F, /* can be configured as cpu port */
|
|
.port_cnt = 7, /* total physical port count */
|
|
.port_nirqs = 4,
|
|
.num_tx_queues = 4,
|
|
.tc_cbs_supported = true,
|
|
.tc_ets_supported = true,
|
|
.ops = &ksz9477_dev_ops,
|
|
.phy_errata_9477 = true,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = ksz9477_masks,
|
|
.shifts = ksz9477_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz9477_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false,
|
|
false, true, false},
|
|
.supports_rmii = {false, false, false, false,
|
|
false, true, false},
|
|
.supports_rgmii = {false, false, false, false,
|
|
false, true, false},
|
|
.internal_phy = {true, true, true, true,
|
|
true, false, false},
|
|
.gbit_capable = {true, true, true, true, true, true, true},
|
|
.wr_table = &ksz9477_register_set,
|
|
.rd_table = &ksz9477_register_set,
|
|
},
|
|
|
|
[KSZ9896] = {
|
|
.chip_id = KSZ9896_CHIP_ID,
|
|
.dev_name = "KSZ9896",
|
|
.num_vlans = 4096,
|
|
.num_alus = 4096,
|
|
.num_statics = 16,
|
|
.cpu_ports = 0x3F, /* can be configured as cpu port */
|
|
.port_cnt = 6, /* total physical port count */
|
|
.port_nirqs = 2,
|
|
.num_tx_queues = 4,
|
|
.ops = &ksz9477_dev_ops,
|
|
.phy_errata_9477 = true,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = ksz9477_masks,
|
|
.shifts = ksz9477_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz9477_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false,
|
|
false, true},
|
|
.supports_rmii = {false, false, false, false,
|
|
false, true},
|
|
.supports_rgmii = {false, false, false, false,
|
|
false, true},
|
|
.internal_phy = {true, true, true, true,
|
|
true, false},
|
|
.gbit_capable = {true, true, true, true, true, true},
|
|
.wr_table = &ksz9896_register_set,
|
|
.rd_table = &ksz9896_register_set,
|
|
},
|
|
|
|
[KSZ9897] = {
|
|
.chip_id = KSZ9897_CHIP_ID,
|
|
.dev_name = "KSZ9897",
|
|
.num_vlans = 4096,
|
|
.num_alus = 4096,
|
|
.num_statics = 16,
|
|
.cpu_ports = 0x7F, /* can be configured as cpu port */
|
|
.port_cnt = 7, /* total physical port count */
|
|
.port_nirqs = 2,
|
|
.num_tx_queues = 4,
|
|
.ops = &ksz9477_dev_ops,
|
|
.phy_errata_9477 = true,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = ksz9477_masks,
|
|
.shifts = ksz9477_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz9477_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false,
|
|
false, true, true},
|
|
.supports_rmii = {false, false, false, false,
|
|
false, true, true},
|
|
.supports_rgmii = {false, false, false, false,
|
|
false, true, true},
|
|
.internal_phy = {true, true, true, true,
|
|
true, false, false},
|
|
.gbit_capable = {true, true, true, true, true, true, true},
|
|
},
|
|
|
|
[KSZ9893] = {
|
|
.chip_id = KSZ9893_CHIP_ID,
|
|
.dev_name = "KSZ9893",
|
|
.num_vlans = 4096,
|
|
.num_alus = 4096,
|
|
.num_statics = 16,
|
|
.cpu_ports = 0x07, /* can be configured as cpu port */
|
|
.port_cnt = 3, /* total port count */
|
|
.port_nirqs = 2,
|
|
.num_tx_queues = 4,
|
|
.ops = &ksz9477_dev_ops,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = ksz9477_masks,
|
|
.shifts = ksz9477_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
|
|
.supports_mii = {false, false, true},
|
|
.supports_rmii = {false, false, true},
|
|
.supports_rgmii = {false, false, true},
|
|
.internal_phy = {true, true, false},
|
|
.gbit_capable = {true, true, true},
|
|
},
|
|
|
|
[KSZ9563] = {
|
|
.chip_id = KSZ9563_CHIP_ID,
|
|
.dev_name = "KSZ9563",
|
|
.num_vlans = 4096,
|
|
.num_alus = 4096,
|
|
.num_statics = 16,
|
|
.cpu_ports = 0x07, /* can be configured as cpu port */
|
|
.port_cnt = 3, /* total port count */
|
|
.port_nirqs = 3,
|
|
.num_tx_queues = 4,
|
|
.tc_cbs_supported = true,
|
|
.tc_ets_supported = true,
|
|
.ops = &ksz9477_dev_ops,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = ksz9477_masks,
|
|
.shifts = ksz9477_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
|
|
.supports_mii = {false, false, true},
|
|
.supports_rmii = {false, false, true},
|
|
.supports_rgmii = {false, false, true},
|
|
.internal_phy = {true, true, false},
|
|
.gbit_capable = {true, true, true},
|
|
},
|
|
|
|
[KSZ9567] = {
|
|
.chip_id = KSZ9567_CHIP_ID,
|
|
.dev_name = "KSZ9567",
|
|
.num_vlans = 4096,
|
|
.num_alus = 4096,
|
|
.num_statics = 16,
|
|
.cpu_ports = 0x7F, /* can be configured as cpu port */
|
|
.port_cnt = 7, /* total physical port count */
|
|
.port_nirqs = 3,
|
|
.num_tx_queues = 4,
|
|
.tc_cbs_supported = true,
|
|
.tc_ets_supported = true,
|
|
.ops = &ksz9477_dev_ops,
|
|
.phy_errata_9477 = true,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = ksz9477_masks,
|
|
.shifts = ksz9477_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz9477_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false,
|
|
false, true, true},
|
|
.supports_rmii = {false, false, false, false,
|
|
false, true, true},
|
|
.supports_rgmii = {false, false, false, false,
|
|
false, true, true},
|
|
.internal_phy = {true, true, true, true,
|
|
true, false, false},
|
|
.gbit_capable = {true, true, true, true, true, true, true},
|
|
},
|
|
|
|
[LAN9370] = {
|
|
.chip_id = LAN9370_CHIP_ID,
|
|
.dev_name = "LAN9370",
|
|
.num_vlans = 4096,
|
|
.num_alus = 1024,
|
|
.num_statics = 256,
|
|
.cpu_ports = 0x10, /* can be configured as cpu port */
|
|
.port_cnt = 5, /* total physical port count */
|
|
.port_nirqs = 6,
|
|
.num_tx_queues = 8,
|
|
.tc_cbs_supported = true,
|
|
.tc_ets_supported = true,
|
|
.ops = &lan937x_dev_ops,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = lan937x_masks,
|
|
.shifts = lan937x_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz9477_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false, true},
|
|
.supports_rmii = {false, false, false, false, true},
|
|
.supports_rgmii = {false, false, false, false, true},
|
|
.internal_phy = {true, true, true, true, false},
|
|
},
|
|
|
|
[LAN9371] = {
|
|
.chip_id = LAN9371_CHIP_ID,
|
|
.dev_name = "LAN9371",
|
|
.num_vlans = 4096,
|
|
.num_alus = 1024,
|
|
.num_statics = 256,
|
|
.cpu_ports = 0x30, /* can be configured as cpu port */
|
|
.port_cnt = 6, /* total physical port count */
|
|
.port_nirqs = 6,
|
|
.num_tx_queues = 8,
|
|
.tc_cbs_supported = true,
|
|
.tc_ets_supported = true,
|
|
.ops = &lan937x_dev_ops,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = lan937x_masks,
|
|
.shifts = lan937x_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz9477_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false, true, true},
|
|
.supports_rmii = {false, false, false, false, true, true},
|
|
.supports_rgmii = {false, false, false, false, true, true},
|
|
.internal_phy = {true, true, true, true, false, false},
|
|
},
|
|
|
|
[LAN9372] = {
|
|
.chip_id = LAN9372_CHIP_ID,
|
|
.dev_name = "LAN9372",
|
|
.num_vlans = 4096,
|
|
.num_alus = 1024,
|
|
.num_statics = 256,
|
|
.cpu_ports = 0x30, /* can be configured as cpu port */
|
|
.port_cnt = 8, /* total physical port count */
|
|
.port_nirqs = 6,
|
|
.num_tx_queues = 8,
|
|
.tc_cbs_supported = true,
|
|
.tc_ets_supported = true,
|
|
.ops = &lan937x_dev_ops,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = lan937x_masks,
|
|
.shifts = lan937x_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz9477_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false,
|
|
true, true, false, false},
|
|
.supports_rmii = {false, false, false, false,
|
|
true, true, false, false},
|
|
.supports_rgmii = {false, false, false, false,
|
|
true, true, false, false},
|
|
.internal_phy = {true, true, true, true,
|
|
false, false, true, true},
|
|
},
|
|
|
|
[LAN9373] = {
|
|
.chip_id = LAN9373_CHIP_ID,
|
|
.dev_name = "LAN9373",
|
|
.num_vlans = 4096,
|
|
.num_alus = 1024,
|
|
.num_statics = 256,
|
|
.cpu_ports = 0x38, /* can be configured as cpu port */
|
|
.port_cnt = 5, /* total physical port count */
|
|
.port_nirqs = 6,
|
|
.num_tx_queues = 8,
|
|
.tc_cbs_supported = true,
|
|
.tc_ets_supported = true,
|
|
.ops = &lan937x_dev_ops,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = lan937x_masks,
|
|
.shifts = lan937x_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz9477_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false,
|
|
true, true, false, false},
|
|
.supports_rmii = {false, false, false, false,
|
|
true, true, false, false},
|
|
.supports_rgmii = {false, false, false, false,
|
|
true, true, false, false},
|
|
.internal_phy = {true, true, true, false,
|
|
false, false, true, true},
|
|
},
|
|
|
|
[LAN9374] = {
|
|
.chip_id = LAN9374_CHIP_ID,
|
|
.dev_name = "LAN9374",
|
|
.num_vlans = 4096,
|
|
.num_alus = 1024,
|
|
.num_statics = 256,
|
|
.cpu_ports = 0x30, /* can be configured as cpu port */
|
|
.port_cnt = 8, /* total physical port count */
|
|
.port_nirqs = 6,
|
|
.num_tx_queues = 8,
|
|
.tc_cbs_supported = true,
|
|
.tc_ets_supported = true,
|
|
.ops = &lan937x_dev_ops,
|
|
.mib_names = ksz9477_mib_names,
|
|
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
|
|
.reg_mib_cnt = MIB_COUNTER_NUM,
|
|
.regs = ksz9477_regs,
|
|
.masks = lan937x_masks,
|
|
.shifts = lan937x_shifts,
|
|
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
|
|
.xmii_ctrl1 = ksz9477_xmii_ctrl1,
|
|
.supports_mii = {false, false, false, false,
|
|
true, true, false, false},
|
|
.supports_rmii = {false, false, false, false,
|
|
true, true, false, false},
|
|
.supports_rgmii = {false, false, false, false,
|
|
true, true, false, false},
|
|
.internal_phy = {true, true, true, true,
|
|
false, false, true, true},
|
|
},
|
|
};
|
|
EXPORT_SYMBOL_GPL(ksz_switch_chips);
|
|
|
|
static const struct ksz_chip_data *ksz_lookup_info(unsigned int prod_num)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
|
|
const struct ksz_chip_data *chip = &ksz_switch_chips[i];
|
|
|
|
if (chip->chip_id == prod_num)
|
|
return chip;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int ksz_check_device_id(struct ksz_device *dev)
|
|
{
|
|
const struct ksz_chip_data *dt_chip_data;
|
|
|
|
dt_chip_data = of_device_get_match_data(dev->dev);
|
|
|
|
/* Check for Device Tree and Chip ID */
|
|
if (dt_chip_data->chip_id != dev->chip_id) {
|
|
dev_err(dev->dev,
|
|
"Device tree specifies chip %s but found %s, please fix it!\n",
|
|
dt_chip_data->dev_name, dev->info->dev_name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ksz_phylink_get_caps(struct dsa_switch *ds, int port,
|
|
struct phylink_config *config)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
config->legacy_pre_march2020 = false;
|
|
|
|
if (dev->info->supports_mii[port])
|
|
__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
|
|
|
|
if (dev->info->supports_rmii[port])
|
|
__set_bit(PHY_INTERFACE_MODE_RMII,
|
|
config->supported_interfaces);
|
|
|
|
if (dev->info->supports_rgmii[port])
|
|
phy_interface_set_rgmii(config->supported_interfaces);
|
|
|
|
if (dev->info->internal_phy[port]) {
|
|
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
|
|
config->supported_interfaces);
|
|
/* Compatibility for phylib's default interface type when the
|
|
* phy-mode property is absent
|
|
*/
|
|
__set_bit(PHY_INTERFACE_MODE_GMII,
|
|
config->supported_interfaces);
|
|
}
|
|
|
|
if (dev->dev_ops->get_caps)
|
|
dev->dev_ops->get_caps(dev, port, config);
|
|
}
|
|
|
|
void ksz_r_mib_stats64(struct ksz_device *dev, int port)
|
|
{
|
|
struct ethtool_pause_stats *pstats;
|
|
struct rtnl_link_stats64 *stats;
|
|
struct ksz_stats_raw *raw;
|
|
struct ksz_port_mib *mib;
|
|
|
|
mib = &dev->ports[port].mib;
|
|
stats = &mib->stats64;
|
|
pstats = &mib->pause_stats;
|
|
raw = (struct ksz_stats_raw *)mib->counters;
|
|
|
|
spin_lock(&mib->stats64_lock);
|
|
|
|
stats->rx_packets = raw->rx_bcast + raw->rx_mcast + raw->rx_ucast +
|
|
raw->rx_pause;
|
|
stats->tx_packets = raw->tx_bcast + raw->tx_mcast + raw->tx_ucast +
|
|
raw->tx_pause;
|
|
|
|
/* HW counters are counting bytes + FCS which is not acceptable
|
|
* for rtnl_link_stats64 interface
|
|
*/
|
|
stats->rx_bytes = raw->rx_total - stats->rx_packets * ETH_FCS_LEN;
|
|
stats->tx_bytes = raw->tx_total - stats->tx_packets * ETH_FCS_LEN;
|
|
|
|
stats->rx_length_errors = raw->rx_undersize + raw->rx_fragments +
|
|
raw->rx_oversize;
|
|
|
|
stats->rx_crc_errors = raw->rx_crc_err;
|
|
stats->rx_frame_errors = raw->rx_align_err;
|
|
stats->rx_dropped = raw->rx_discards;
|
|
stats->rx_errors = stats->rx_length_errors + stats->rx_crc_errors +
|
|
stats->rx_frame_errors + stats->rx_dropped;
|
|
|
|
stats->tx_window_errors = raw->tx_late_col;
|
|
stats->tx_fifo_errors = raw->tx_discards;
|
|
stats->tx_aborted_errors = raw->tx_exc_col;
|
|
stats->tx_errors = stats->tx_window_errors + stats->tx_fifo_errors +
|
|
stats->tx_aborted_errors;
|
|
|
|
stats->multicast = raw->rx_mcast;
|
|
stats->collisions = raw->tx_total_col;
|
|
|
|
pstats->tx_pause_frames = raw->tx_pause;
|
|
pstats->rx_pause_frames = raw->rx_pause;
|
|
|
|
spin_unlock(&mib->stats64_lock);
|
|
}
|
|
|
|
void ksz88xx_r_mib_stats64(struct ksz_device *dev, int port)
|
|
{
|
|
struct ethtool_pause_stats *pstats;
|
|
struct rtnl_link_stats64 *stats;
|
|
struct ksz88xx_stats_raw *raw;
|
|
struct ksz_port_mib *mib;
|
|
|
|
mib = &dev->ports[port].mib;
|
|
stats = &mib->stats64;
|
|
pstats = &mib->pause_stats;
|
|
raw = (struct ksz88xx_stats_raw *)mib->counters;
|
|
|
|
spin_lock(&mib->stats64_lock);
|
|
|
|
stats->rx_packets = raw->rx_bcast + raw->rx_mcast + raw->rx_ucast +
|
|
raw->rx_pause;
|
|
stats->tx_packets = raw->tx_bcast + raw->tx_mcast + raw->tx_ucast +
|
|
raw->tx_pause;
|
|
|
|
/* HW counters are counting bytes + FCS which is not acceptable
|
|
* for rtnl_link_stats64 interface
|
|
*/
|
|
stats->rx_bytes = raw->rx + raw->rx_hi - stats->rx_packets * ETH_FCS_LEN;
|
|
stats->tx_bytes = raw->tx + raw->tx_hi - stats->tx_packets * ETH_FCS_LEN;
|
|
|
|
stats->rx_length_errors = raw->rx_undersize + raw->rx_fragments +
|
|
raw->rx_oversize;
|
|
|
|
stats->rx_crc_errors = raw->rx_crc_err;
|
|
stats->rx_frame_errors = raw->rx_align_err;
|
|
stats->rx_dropped = raw->rx_discards;
|
|
stats->rx_errors = stats->rx_length_errors + stats->rx_crc_errors +
|
|
stats->rx_frame_errors + stats->rx_dropped;
|
|
|
|
stats->tx_window_errors = raw->tx_late_col;
|
|
stats->tx_fifo_errors = raw->tx_discards;
|
|
stats->tx_aborted_errors = raw->tx_exc_col;
|
|
stats->tx_errors = stats->tx_window_errors + stats->tx_fifo_errors +
|
|
stats->tx_aborted_errors;
|
|
|
|
stats->multicast = raw->rx_mcast;
|
|
stats->collisions = raw->tx_total_col;
|
|
|
|
pstats->tx_pause_frames = raw->tx_pause;
|
|
pstats->rx_pause_frames = raw->rx_pause;
|
|
|
|
spin_unlock(&mib->stats64_lock);
|
|
}
|
|
|
|
static void ksz_get_stats64(struct dsa_switch *ds, int port,
|
|
struct rtnl_link_stats64 *s)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
struct ksz_port_mib *mib;
|
|
|
|
mib = &dev->ports[port].mib;
|
|
|
|
spin_lock(&mib->stats64_lock);
|
|
memcpy(s, &mib->stats64, sizeof(*s));
|
|
spin_unlock(&mib->stats64_lock);
|
|
}
|
|
|
|
static void ksz_get_pause_stats(struct dsa_switch *ds, int port,
|
|
struct ethtool_pause_stats *pause_stats)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
struct ksz_port_mib *mib;
|
|
|
|
mib = &dev->ports[port].mib;
|
|
|
|
spin_lock(&mib->stats64_lock);
|
|
memcpy(pause_stats, &mib->pause_stats, sizeof(*pause_stats));
|
|
spin_unlock(&mib->stats64_lock);
|
|
}
|
|
|
|
static void ksz_get_strings(struct dsa_switch *ds, int port,
|
|
u32 stringset, uint8_t *buf)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
int i;
|
|
|
|
if (stringset != ETH_SS_STATS)
|
|
return;
|
|
|
|
for (i = 0; i < dev->info->mib_cnt; i++) {
|
|
memcpy(buf + i * ETH_GSTRING_LEN,
|
|
dev->info->mib_names[i].string, ETH_GSTRING_LEN);
|
|
}
|
|
}
|
|
|
|
static void ksz_update_port_member(struct ksz_device *dev, int port)
|
|
{
|
|
struct ksz_port *p = &dev->ports[port];
|
|
struct dsa_switch *ds = dev->ds;
|
|
u8 port_member = 0, cpu_port;
|
|
const struct dsa_port *dp;
|
|
int i, j;
|
|
|
|
if (!dsa_is_user_port(ds, port))
|
|
return;
|
|
|
|
dp = dsa_to_port(ds, port);
|
|
cpu_port = BIT(dsa_upstream_port(ds, port));
|
|
|
|
for (i = 0; i < ds->num_ports; i++) {
|
|
const struct dsa_port *other_dp = dsa_to_port(ds, i);
|
|
struct ksz_port *other_p = &dev->ports[i];
|
|
u8 val = 0;
|
|
|
|
if (!dsa_is_user_port(ds, i))
|
|
continue;
|
|
if (port == i)
|
|
continue;
|
|
if (!dsa_port_bridge_same(dp, other_dp))
|
|
continue;
|
|
if (other_p->stp_state != BR_STATE_FORWARDING)
|
|
continue;
|
|
|
|
if (p->stp_state == BR_STATE_FORWARDING) {
|
|
val |= BIT(port);
|
|
port_member |= BIT(i);
|
|
}
|
|
|
|
/* Retain port [i]'s relationship to other ports than [port] */
|
|
for (j = 0; j < ds->num_ports; j++) {
|
|
const struct dsa_port *third_dp;
|
|
struct ksz_port *third_p;
|
|
|
|
if (j == i)
|
|
continue;
|
|
if (j == port)
|
|
continue;
|
|
if (!dsa_is_user_port(ds, j))
|
|
continue;
|
|
third_p = &dev->ports[j];
|
|
if (third_p->stp_state != BR_STATE_FORWARDING)
|
|
continue;
|
|
third_dp = dsa_to_port(ds, j);
|
|
if (dsa_port_bridge_same(other_dp, third_dp))
|
|
val |= BIT(j);
|
|
}
|
|
|
|
dev->dev_ops->cfg_port_member(dev, i, val | cpu_port);
|
|
}
|
|
|
|
dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port);
|
|
}
|
|
|
|
static int ksz_sw_mdio_read(struct mii_bus *bus, int addr, int regnum)
|
|
{
|
|
struct ksz_device *dev = bus->priv;
|
|
u16 val;
|
|
int ret;
|
|
|
|
ret = dev->dev_ops->r_phy(dev, addr, regnum, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int ksz_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
|
|
u16 val)
|
|
{
|
|
struct ksz_device *dev = bus->priv;
|
|
|
|
return dev->dev_ops->w_phy(dev, addr, regnum, val);
|
|
}
|
|
|
|
static int ksz_irq_phy_setup(struct ksz_device *dev)
|
|
{
|
|
struct dsa_switch *ds = dev->ds;
|
|
int phy;
|
|
int irq;
|
|
int ret;
|
|
|
|
for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++) {
|
|
if (BIT(phy) & ds->phys_mii_mask) {
|
|
irq = irq_find_mapping(dev->ports[phy].pirq.domain,
|
|
PORT_SRC_PHY_INT);
|
|
if (irq < 0) {
|
|
ret = irq;
|
|
goto out;
|
|
}
|
|
ds->slave_mii_bus->irq[phy] = irq;
|
|
}
|
|
}
|
|
return 0;
|
|
out:
|
|
while (phy--)
|
|
if (BIT(phy) & ds->phys_mii_mask)
|
|
irq_dispose_mapping(ds->slave_mii_bus->irq[phy]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ksz_irq_phy_free(struct ksz_device *dev)
|
|
{
|
|
struct dsa_switch *ds = dev->ds;
|
|
int phy;
|
|
|
|
for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++)
|
|
if (BIT(phy) & ds->phys_mii_mask)
|
|
irq_dispose_mapping(ds->slave_mii_bus->irq[phy]);
|
|
}
|
|
|
|
static int ksz_mdio_register(struct ksz_device *dev)
|
|
{
|
|
struct dsa_switch *ds = dev->ds;
|
|
struct device_node *mdio_np;
|
|
struct mii_bus *bus;
|
|
int ret;
|
|
|
|
mdio_np = of_get_child_by_name(dev->dev->of_node, "mdio");
|
|
if (!mdio_np)
|
|
return 0;
|
|
|
|
bus = devm_mdiobus_alloc(ds->dev);
|
|
if (!bus) {
|
|
of_node_put(mdio_np);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bus->priv = dev;
|
|
bus->read = ksz_sw_mdio_read;
|
|
bus->write = ksz_sw_mdio_write;
|
|
bus->name = "ksz slave smi";
|
|
snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index);
|
|
bus->parent = ds->dev;
|
|
bus->phy_mask = ~ds->phys_mii_mask;
|
|
|
|
ds->slave_mii_bus = bus;
|
|
|
|
if (dev->irq > 0) {
|
|
ret = ksz_irq_phy_setup(dev);
|
|
if (ret) {
|
|
of_node_put(mdio_np);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = devm_of_mdiobus_register(ds->dev, bus, mdio_np);
|
|
if (ret) {
|
|
dev_err(ds->dev, "unable to register MDIO bus %s\n",
|
|
bus->id);
|
|
if (dev->irq > 0)
|
|
ksz_irq_phy_free(dev);
|
|
}
|
|
|
|
of_node_put(mdio_np);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ksz_irq_mask(struct irq_data *d)
|
|
{
|
|
struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
|
|
|
|
kirq->masked |= BIT(d->hwirq);
|
|
}
|
|
|
|
static void ksz_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
|
|
|
|
kirq->masked &= ~BIT(d->hwirq);
|
|
}
|
|
|
|
static void ksz_irq_bus_lock(struct irq_data *d)
|
|
{
|
|
struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
|
|
|
|
mutex_lock(&kirq->dev->lock_irq);
|
|
}
|
|
|
|
static void ksz_irq_bus_sync_unlock(struct irq_data *d)
|
|
{
|
|
struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
|
|
struct ksz_device *dev = kirq->dev;
|
|
int ret;
|
|
|
|
ret = ksz_write32(dev, kirq->reg_mask, kirq->masked);
|
|
if (ret)
|
|
dev_err(dev->dev, "failed to change IRQ mask\n");
|
|
|
|
mutex_unlock(&dev->lock_irq);
|
|
}
|
|
|
|
static const struct irq_chip ksz_irq_chip = {
|
|
.name = "ksz-irq",
|
|
.irq_mask = ksz_irq_mask,
|
|
.irq_unmask = ksz_irq_unmask,
|
|
.irq_bus_lock = ksz_irq_bus_lock,
|
|
.irq_bus_sync_unlock = ksz_irq_bus_sync_unlock,
|
|
};
|
|
|
|
static int ksz_irq_domain_map(struct irq_domain *d,
|
|
unsigned int irq, irq_hw_number_t hwirq)
|
|
{
|
|
irq_set_chip_data(irq, d->host_data);
|
|
irq_set_chip_and_handler(irq, &ksz_irq_chip, handle_level_irq);
|
|
irq_set_noprobe(irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops ksz_irq_domain_ops = {
|
|
.map = ksz_irq_domain_map,
|
|
.xlate = irq_domain_xlate_twocell,
|
|
};
|
|
|
|
static void ksz_irq_free(struct ksz_irq *kirq)
|
|
{
|
|
int irq, virq;
|
|
|
|
free_irq(kirq->irq_num, kirq);
|
|
|
|
for (irq = 0; irq < kirq->nirqs; irq++) {
|
|
virq = irq_find_mapping(kirq->domain, irq);
|
|
irq_dispose_mapping(virq);
|
|
}
|
|
|
|
irq_domain_remove(kirq->domain);
|
|
}
|
|
|
|
static irqreturn_t ksz_irq_thread_fn(int irq, void *dev_id)
|
|
{
|
|
struct ksz_irq *kirq = dev_id;
|
|
unsigned int nhandled = 0;
|
|
struct ksz_device *dev;
|
|
unsigned int sub_irq;
|
|
u8 data;
|
|
int ret;
|
|
u8 n;
|
|
|
|
dev = kirq->dev;
|
|
|
|
/* Read interrupt status register */
|
|
ret = ksz_read8(dev, kirq->reg_status, &data);
|
|
if (ret)
|
|
goto out;
|
|
|
|
for (n = 0; n < kirq->nirqs; ++n) {
|
|
if (data & BIT(n)) {
|
|
sub_irq = irq_find_mapping(kirq->domain, n);
|
|
handle_nested_irq(sub_irq);
|
|
++nhandled;
|
|
}
|
|
}
|
|
out:
|
|
return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
|
|
}
|
|
|
|
static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq)
|
|
{
|
|
int ret, n;
|
|
|
|
kirq->dev = dev;
|
|
kirq->masked = ~0;
|
|
|
|
kirq->domain = irq_domain_add_simple(dev->dev->of_node, kirq->nirqs, 0,
|
|
&ksz_irq_domain_ops, kirq);
|
|
if (!kirq->domain)
|
|
return -ENOMEM;
|
|
|
|
for (n = 0; n < kirq->nirqs; n++)
|
|
irq_create_mapping(kirq->domain, n);
|
|
|
|
ret = request_threaded_irq(kirq->irq_num, NULL, ksz_irq_thread_fn,
|
|
IRQF_ONESHOT, kirq->name, kirq);
|
|
if (ret)
|
|
goto out;
|
|
|
|
return 0;
|
|
|
|
out:
|
|
ksz_irq_free(kirq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ksz_girq_setup(struct ksz_device *dev)
|
|
{
|
|
struct ksz_irq *girq = &dev->girq;
|
|
|
|
girq->nirqs = dev->info->port_cnt;
|
|
girq->reg_mask = REG_SW_PORT_INT_MASK__1;
|
|
girq->reg_status = REG_SW_PORT_INT_STATUS__1;
|
|
snprintf(girq->name, sizeof(girq->name), "global_port_irq");
|
|
|
|
girq->irq_num = dev->irq;
|
|
|
|
return ksz_irq_common_setup(dev, girq);
|
|
}
|
|
|
|
static int ksz_pirq_setup(struct ksz_device *dev, u8 p)
|
|
{
|
|
struct ksz_irq *pirq = &dev->ports[p].pirq;
|
|
|
|
pirq->nirqs = dev->info->port_nirqs;
|
|
pirq->reg_mask = dev->dev_ops->get_port_addr(p, REG_PORT_INT_MASK);
|
|
pirq->reg_status = dev->dev_ops->get_port_addr(p, REG_PORT_INT_STATUS);
|
|
snprintf(pirq->name, sizeof(pirq->name), "port_irq-%d", p);
|
|
|
|
pirq->irq_num = irq_find_mapping(dev->girq.domain, p);
|
|
if (pirq->irq_num < 0)
|
|
return pirq->irq_num;
|
|
|
|
return ksz_irq_common_setup(dev, pirq);
|
|
}
|
|
|
|
static int ksz_setup(struct dsa_switch *ds)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
struct dsa_port *dp;
|
|
struct ksz_port *p;
|
|
const u16 *regs;
|
|
int ret;
|
|
|
|
regs = dev->info->regs;
|
|
|
|
dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
|
|
dev->info->num_vlans, GFP_KERNEL);
|
|
if (!dev->vlan_cache)
|
|
return -ENOMEM;
|
|
|
|
ret = dev->dev_ops->reset(dev);
|
|
if (ret) {
|
|
dev_err(ds->dev, "failed to reset switch\n");
|
|
return ret;
|
|
}
|
|
|
|
/* set broadcast storm protection 10% rate */
|
|
regmap_update_bits(dev->regmap[1], regs[S_BROADCAST_CTRL],
|
|
BROADCAST_STORM_RATE,
|
|
(BROADCAST_STORM_VALUE *
|
|
BROADCAST_STORM_PROT_RATE) / 100);
|
|
|
|
dev->dev_ops->config_cpu_port(ds);
|
|
|
|
dev->dev_ops->enable_stp_addr(dev);
|
|
|
|
ds->num_tx_queues = dev->info->num_tx_queues;
|
|
|
|
regmap_update_bits(dev->regmap[0], regs[S_MULTICAST_CTRL],
|
|
MULTICAST_STORM_DISABLE, MULTICAST_STORM_DISABLE);
|
|
|
|
ksz_init_mib_timer(dev);
|
|
|
|
ds->configure_vlan_while_not_filtering = false;
|
|
|
|
if (dev->dev_ops->setup) {
|
|
ret = dev->dev_ops->setup(ds);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Start with learning disabled on standalone user ports, and enabled
|
|
* on the CPU port. In lack of other finer mechanisms, learning on the
|
|
* CPU port will avoid flooding bridge local addresses on the network
|
|
* in some cases.
|
|
*/
|
|
p = &dev->ports[dev->cpu_port];
|
|
p->learning = true;
|
|
|
|
if (dev->irq > 0) {
|
|
ret = ksz_girq_setup(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dsa_switch_for_each_user_port(dp, dev->ds) {
|
|
ret = ksz_pirq_setup(dev, dp->index);
|
|
if (ret)
|
|
goto out_girq;
|
|
|
|
ret = ksz_ptp_irq_setup(ds, dp->index);
|
|
if (ret)
|
|
goto out_pirq;
|
|
}
|
|
}
|
|
|
|
ret = ksz_ptp_clock_register(ds);
|
|
if (ret) {
|
|
dev_err(dev->dev, "Failed to register PTP clock: %d\n", ret);
|
|
goto out_ptpirq;
|
|
}
|
|
|
|
ret = ksz_mdio_register(dev);
|
|
if (ret < 0) {
|
|
dev_err(dev->dev, "failed to register the mdio");
|
|
goto out_ptp_clock_unregister;
|
|
}
|
|
|
|
/* start switch */
|
|
regmap_update_bits(dev->regmap[0], regs[S_START_CTRL],
|
|
SW_START, SW_START);
|
|
|
|
return 0;
|
|
|
|
out_ptp_clock_unregister:
|
|
ksz_ptp_clock_unregister(ds);
|
|
out_ptpirq:
|
|
if (dev->irq > 0)
|
|
dsa_switch_for_each_user_port(dp, dev->ds)
|
|
ksz_ptp_irq_free(ds, dp->index);
|
|
out_pirq:
|
|
if (dev->irq > 0)
|
|
dsa_switch_for_each_user_port(dp, dev->ds)
|
|
ksz_irq_free(&dev->ports[dp->index].pirq);
|
|
out_girq:
|
|
if (dev->irq > 0)
|
|
ksz_irq_free(&dev->girq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ksz_teardown(struct dsa_switch *ds)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
struct dsa_port *dp;
|
|
|
|
ksz_ptp_clock_unregister(ds);
|
|
|
|
if (dev->irq > 0) {
|
|
dsa_switch_for_each_user_port(dp, dev->ds) {
|
|
ksz_ptp_irq_free(ds, dp->index);
|
|
|
|
ksz_irq_free(&dev->ports[dp->index].pirq);
|
|
}
|
|
|
|
ksz_irq_free(&dev->girq);
|
|
}
|
|
|
|
if (dev->dev_ops->teardown)
|
|
dev->dev_ops->teardown(ds);
|
|
}
|
|
|
|
static void port_r_cnt(struct ksz_device *dev, int port)
|
|
{
|
|
struct ksz_port_mib *mib = &dev->ports[port].mib;
|
|
u64 *dropped;
|
|
|
|
/* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
|
|
while (mib->cnt_ptr < dev->info->reg_mib_cnt) {
|
|
dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
|
|
&mib->counters[mib->cnt_ptr]);
|
|
++mib->cnt_ptr;
|
|
}
|
|
|
|
/* last one in storage */
|
|
dropped = &mib->counters[dev->info->mib_cnt];
|
|
|
|
/* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
|
|
while (mib->cnt_ptr < dev->info->mib_cnt) {
|
|
dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
|
|
dropped, &mib->counters[mib->cnt_ptr]);
|
|
++mib->cnt_ptr;
|
|
}
|
|
mib->cnt_ptr = 0;
|
|
}
|
|
|
|
static void ksz_mib_read_work(struct work_struct *work)
|
|
{
|
|
struct ksz_device *dev = container_of(work, struct ksz_device,
|
|
mib_read.work);
|
|
struct ksz_port_mib *mib;
|
|
struct ksz_port *p;
|
|
int i;
|
|
|
|
for (i = 0; i < dev->info->port_cnt; i++) {
|
|
if (dsa_is_unused_port(dev->ds, i))
|
|
continue;
|
|
|
|
p = &dev->ports[i];
|
|
mib = &p->mib;
|
|
mutex_lock(&mib->cnt_mutex);
|
|
|
|
/* Only read MIB counters when the port is told to do.
|
|
* If not, read only dropped counters when link is not up.
|
|
*/
|
|
if (!p->read) {
|
|
const struct dsa_port *dp = dsa_to_port(dev->ds, i);
|
|
|
|
if (!netif_carrier_ok(dp->slave))
|
|
mib->cnt_ptr = dev->info->reg_mib_cnt;
|
|
}
|
|
port_r_cnt(dev, i);
|
|
p->read = false;
|
|
|
|
if (dev->dev_ops->r_mib_stat64)
|
|
dev->dev_ops->r_mib_stat64(dev, i);
|
|
|
|
mutex_unlock(&mib->cnt_mutex);
|
|
}
|
|
|
|
schedule_delayed_work(&dev->mib_read, dev->mib_read_interval);
|
|
}
|
|
|
|
void ksz_init_mib_timer(struct ksz_device *dev)
|
|
{
|
|
int i;
|
|
|
|
INIT_DELAYED_WORK(&dev->mib_read, ksz_mib_read_work);
|
|
|
|
for (i = 0; i < dev->info->port_cnt; i++) {
|
|
struct ksz_port_mib *mib = &dev->ports[i].mib;
|
|
|
|
dev->dev_ops->port_init_cnt(dev, i);
|
|
|
|
mib->cnt_ptr = 0;
|
|
memset(mib->counters, 0, dev->info->mib_cnt * sizeof(u64));
|
|
}
|
|
}
|
|
|
|
static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
u16 val = 0xffff;
|
|
int ret;
|
|
|
|
ret = dev->dev_ops->r_phy(dev, addr, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
int ret;
|
|
|
|
ret = dev->dev_ops->w_phy(dev, addr, reg, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (dev->chip_id == KSZ8830_CHIP_ID) {
|
|
/* Silicon Errata Sheet (DS80000830A):
|
|
* Port 1 does not work with LinkMD Cable-Testing.
|
|
* Port 1 does not respond to received PAUSE control frames.
|
|
*/
|
|
if (!port)
|
|
return MICREL_KSZ8_P1_ERRATA;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ksz_mac_link_down(struct dsa_switch *ds, int port,
|
|
unsigned int mode, phy_interface_t interface)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
struct ksz_port *p = &dev->ports[port];
|
|
|
|
/* Read all MIB counters when the link is going down. */
|
|
p->read = true;
|
|
/* timer started */
|
|
if (dev->mib_read_interval)
|
|
schedule_delayed_work(&dev->mib_read, 0);
|
|
}
|
|
|
|
static int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (sset != ETH_SS_STATS)
|
|
return 0;
|
|
|
|
return dev->info->mib_cnt;
|
|
}
|
|
|
|
static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
|
|
uint64_t *buf)
|
|
{
|
|
const struct dsa_port *dp = dsa_to_port(ds, port);
|
|
struct ksz_device *dev = ds->priv;
|
|
struct ksz_port_mib *mib;
|
|
|
|
mib = &dev->ports[port].mib;
|
|
mutex_lock(&mib->cnt_mutex);
|
|
|
|
/* Only read dropped counters if no link. */
|
|
if (!netif_carrier_ok(dp->slave))
|
|
mib->cnt_ptr = dev->info->reg_mib_cnt;
|
|
port_r_cnt(dev, port);
|
|
memcpy(buf, mib->counters, dev->info->mib_cnt * sizeof(u64));
|
|
mutex_unlock(&mib->cnt_mutex);
|
|
}
|
|
|
|
static int ksz_port_bridge_join(struct dsa_switch *ds, int port,
|
|
struct dsa_bridge bridge,
|
|
bool *tx_fwd_offload,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
/* port_stp_state_set() will be called after to put the port in
|
|
* appropriate state so there is no need to do anything.
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
|
|
struct dsa_bridge bridge)
|
|
{
|
|
/* port_stp_state_set() will be called after to put the port in
|
|
* forwarding state so there is no need to do anything.
|
|
*/
|
|
}
|
|
|
|
static void ksz_port_fast_age(struct dsa_switch *ds, int port)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
dev->dev_ops->flush_dyn_mac_table(dev, port);
|
|
}
|
|
|
|
static int ksz_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->dev_ops->set_ageing_time)
|
|
return -EOPNOTSUPP;
|
|
|
|
return dev->dev_ops->set_ageing_time(dev, msecs);
|
|
}
|
|
|
|
static int ksz_port_fdb_add(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid,
|
|
struct dsa_db db)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->dev_ops->fdb_add)
|
|
return -EOPNOTSUPP;
|
|
|
|
return dev->dev_ops->fdb_add(dev, port, addr, vid, db);
|
|
}
|
|
|
|
static int ksz_port_fdb_del(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr,
|
|
u16 vid, struct dsa_db db)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->dev_ops->fdb_del)
|
|
return -EOPNOTSUPP;
|
|
|
|
return dev->dev_ops->fdb_del(dev, port, addr, vid, db);
|
|
}
|
|
|
|
static int ksz_port_fdb_dump(struct dsa_switch *ds, int port,
|
|
dsa_fdb_dump_cb_t *cb, void *data)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->dev_ops->fdb_dump)
|
|
return -EOPNOTSUPP;
|
|
|
|
return dev->dev_ops->fdb_dump(dev, port, cb, data);
|
|
}
|
|
|
|
static int ksz_port_mdb_add(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_mdb *mdb,
|
|
struct dsa_db db)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->dev_ops->mdb_add)
|
|
return -EOPNOTSUPP;
|
|
|
|
return dev->dev_ops->mdb_add(dev, port, mdb, db);
|
|
}
|
|
|
|
static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_mdb *mdb,
|
|
struct dsa_db db)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->dev_ops->mdb_del)
|
|
return -EOPNOTSUPP;
|
|
|
|
return dev->dev_ops->mdb_del(dev, port, mdb, db);
|
|
}
|
|
|
|
static int ksz_enable_port(struct dsa_switch *ds, int port,
|
|
struct phy_device *phy)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dsa_is_user_port(ds, port))
|
|
return 0;
|
|
|
|
/* setup slave port */
|
|
dev->dev_ops->port_setup(dev, port, false);
|
|
|
|
/* port_stp_state_set() will be called after to enable the port so
|
|
* there is no need to do anything.
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
struct ksz_port *p;
|
|
const u16 *regs;
|
|
u8 data;
|
|
|
|
regs = dev->info->regs;
|
|
|
|
ksz_pread8(dev, port, regs[P_STP_CTRL], &data);
|
|
data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
|
|
|
|
p = &dev->ports[port];
|
|
|
|
switch (state) {
|
|
case BR_STATE_DISABLED:
|
|
data |= PORT_LEARN_DISABLE;
|
|
break;
|
|
case BR_STATE_LISTENING:
|
|
data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
|
|
break;
|
|
case BR_STATE_LEARNING:
|
|
data |= PORT_RX_ENABLE;
|
|
if (!p->learning)
|
|
data |= PORT_LEARN_DISABLE;
|
|
break;
|
|
case BR_STATE_FORWARDING:
|
|
data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
|
|
if (!p->learning)
|
|
data |= PORT_LEARN_DISABLE;
|
|
break;
|
|
case BR_STATE_BLOCKING:
|
|
data |= PORT_LEARN_DISABLE;
|
|
break;
|
|
default:
|
|
dev_err(ds->dev, "invalid STP state: %d\n", state);
|
|
return;
|
|
}
|
|
|
|
ksz_pwrite8(dev, port, regs[P_STP_CTRL], data);
|
|
|
|
p->stp_state = state;
|
|
|
|
ksz_update_port_member(dev, port);
|
|
}
|
|
|
|
static int ksz_port_pre_bridge_flags(struct dsa_switch *ds, int port,
|
|
struct switchdev_brport_flags flags,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
if (flags.mask & ~BR_LEARNING)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz_port_bridge_flags(struct dsa_switch *ds, int port,
|
|
struct switchdev_brport_flags flags,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
struct ksz_port *p = &dev->ports[port];
|
|
|
|
if (flags.mask & BR_LEARNING) {
|
|
p->learning = !!(flags.val & BR_LEARNING);
|
|
|
|
/* Make the change take effect immediately */
|
|
ksz_port_stp_state_set(ds, port, p->stp_state);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
|
|
int port,
|
|
enum dsa_tag_protocol mp)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
enum dsa_tag_protocol proto = DSA_TAG_PROTO_NONE;
|
|
|
|
if (dev->chip_id == KSZ8795_CHIP_ID ||
|
|
dev->chip_id == KSZ8794_CHIP_ID ||
|
|
dev->chip_id == KSZ8765_CHIP_ID)
|
|
proto = DSA_TAG_PROTO_KSZ8795;
|
|
|
|
if (dev->chip_id == KSZ8830_CHIP_ID ||
|
|
dev->chip_id == KSZ8563_CHIP_ID ||
|
|
dev->chip_id == KSZ9893_CHIP_ID ||
|
|
dev->chip_id == KSZ9563_CHIP_ID)
|
|
proto = DSA_TAG_PROTO_KSZ9893;
|
|
|
|
if (dev->chip_id == KSZ9477_CHIP_ID ||
|
|
dev->chip_id == KSZ9896_CHIP_ID ||
|
|
dev->chip_id == KSZ9897_CHIP_ID ||
|
|
dev->chip_id == KSZ9567_CHIP_ID)
|
|
proto = DSA_TAG_PROTO_KSZ9477;
|
|
|
|
if (is_lan937x(dev))
|
|
proto = DSA_TAG_PROTO_LAN937X_VALUE;
|
|
|
|
return proto;
|
|
}
|
|
|
|
static int ksz_connect_tag_protocol(struct dsa_switch *ds,
|
|
enum dsa_tag_protocol proto)
|
|
{
|
|
struct ksz_tagger_data *tagger_data;
|
|
|
|
tagger_data = ksz_tagger_data(ds);
|
|
tagger_data->xmit_work_fn = ksz_port_deferred_xmit;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port,
|
|
bool flag, struct netlink_ext_ack *extack)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->dev_ops->vlan_filtering)
|
|
return -EOPNOTSUPP;
|
|
|
|
return dev->dev_ops->vlan_filtering(dev, port, flag, extack);
|
|
}
|
|
|
|
static int ksz_port_vlan_add(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->dev_ops->vlan_add)
|
|
return -EOPNOTSUPP;
|
|
|
|
return dev->dev_ops->vlan_add(dev, port, vlan, extack);
|
|
}
|
|
|
|
static int ksz_port_vlan_del(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->dev_ops->vlan_del)
|
|
return -EOPNOTSUPP;
|
|
|
|
return dev->dev_ops->vlan_del(dev, port, vlan);
|
|
}
|
|
|
|
static int ksz_port_mirror_add(struct dsa_switch *ds, int port,
|
|
struct dsa_mall_mirror_tc_entry *mirror,
|
|
bool ingress, struct netlink_ext_ack *extack)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->dev_ops->mirror_add)
|
|
return -EOPNOTSUPP;
|
|
|
|
return dev->dev_ops->mirror_add(dev, port, mirror, ingress, extack);
|
|
}
|
|
|
|
static void ksz_port_mirror_del(struct dsa_switch *ds, int port,
|
|
struct dsa_mall_mirror_tc_entry *mirror)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (dev->dev_ops->mirror_del)
|
|
dev->dev_ops->mirror_del(dev, port, mirror);
|
|
}
|
|
|
|
static int ksz_change_mtu(struct dsa_switch *ds, int port, int mtu)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->dev_ops->change_mtu)
|
|
return -EOPNOTSUPP;
|
|
|
|
return dev->dev_ops->change_mtu(dev, port, mtu);
|
|
}
|
|
|
|
static int ksz_max_mtu(struct dsa_switch *ds, int port)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
switch (dev->chip_id) {
|
|
case KSZ8795_CHIP_ID:
|
|
case KSZ8794_CHIP_ID:
|
|
case KSZ8765_CHIP_ID:
|
|
return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
|
|
case KSZ8830_CHIP_ID:
|
|
return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
|
|
case KSZ8563_CHIP_ID:
|
|
case KSZ9477_CHIP_ID:
|
|
case KSZ9563_CHIP_ID:
|
|
case KSZ9567_CHIP_ID:
|
|
case KSZ9893_CHIP_ID:
|
|
case KSZ9896_CHIP_ID:
|
|
case KSZ9897_CHIP_ID:
|
|
case LAN9370_CHIP_ID:
|
|
case LAN9371_CHIP_ID:
|
|
case LAN9372_CHIP_ID:
|
|
case LAN9373_CHIP_ID:
|
|
case LAN9374_CHIP_ID:
|
|
return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int ksz_validate_eee(struct dsa_switch *ds, int port)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (!dev->info->internal_phy[port])
|
|
return -EOPNOTSUPP;
|
|
|
|
switch (dev->chip_id) {
|
|
case KSZ8563_CHIP_ID:
|
|
case KSZ9477_CHIP_ID:
|
|
case KSZ9563_CHIP_ID:
|
|
case KSZ9567_CHIP_ID:
|
|
case KSZ9893_CHIP_ID:
|
|
case KSZ9896_CHIP_ID:
|
|
case KSZ9897_CHIP_ID:
|
|
return 0;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int ksz_get_mac_eee(struct dsa_switch *ds, int port,
|
|
struct ethtool_eee *e)
|
|
{
|
|
int ret;
|
|
|
|
ret = ksz_validate_eee(ds, port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* There is no documented control of Tx LPI configuration. */
|
|
e->tx_lpi_enabled = true;
|
|
|
|
/* There is no documented control of Tx LPI timer. According to tests
|
|
* Tx LPI timer seems to be set by default to minimal value.
|
|
*/
|
|
e->tx_lpi_timer = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz_set_mac_eee(struct dsa_switch *ds, int port,
|
|
struct ethtool_eee *e)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
int ret;
|
|
|
|
ret = ksz_validate_eee(ds, port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!e->tx_lpi_enabled) {
|
|
dev_err(dev->dev, "Disabling EEE Tx LPI is not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (e->tx_lpi_timer) {
|
|
dev_err(dev->dev, "Setting EEE Tx LPI timer is not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ksz_set_xmii(struct ksz_device *dev, int port,
|
|
phy_interface_t interface)
|
|
{
|
|
const u8 *bitval = dev->info->xmii_ctrl1;
|
|
struct ksz_port *p = &dev->ports[port];
|
|
const u16 *regs = dev->info->regs;
|
|
u8 data8;
|
|
|
|
ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
|
|
|
|
data8 &= ~(P_MII_SEL_M | P_RGMII_ID_IG_ENABLE |
|
|
P_RGMII_ID_EG_ENABLE);
|
|
|
|
switch (interface) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
data8 |= bitval[P_MII_SEL];
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
data8 |= bitval[P_RMII_SEL];
|
|
break;
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
data8 |= bitval[P_GMII_SEL];
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
data8 |= bitval[P_RGMII_SEL];
|
|
/* On KSZ9893, disable RGMII in-band status support */
|
|
if (dev->chip_id == KSZ9893_CHIP_ID ||
|
|
dev->chip_id == KSZ8563_CHIP_ID ||
|
|
dev->chip_id == KSZ9563_CHIP_ID)
|
|
data8 &= ~P_MII_MAC_MODE;
|
|
break;
|
|
default:
|
|
dev_err(dev->dev, "Unsupported interface '%s' for port %d\n",
|
|
phy_modes(interface), port);
|
|
return;
|
|
}
|
|
|
|
if (p->rgmii_tx_val)
|
|
data8 |= P_RGMII_ID_EG_ENABLE;
|
|
|
|
if (p->rgmii_rx_val)
|
|
data8 |= P_RGMII_ID_IG_ENABLE;
|
|
|
|
/* Write the updated value */
|
|
ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
|
|
}
|
|
|
|
phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit)
|
|
{
|
|
const u8 *bitval = dev->info->xmii_ctrl1;
|
|
const u16 *regs = dev->info->regs;
|
|
phy_interface_t interface;
|
|
u8 data8;
|
|
u8 val;
|
|
|
|
ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
|
|
|
|
val = FIELD_GET(P_MII_SEL_M, data8);
|
|
|
|
if (val == bitval[P_MII_SEL]) {
|
|
if (gbit)
|
|
interface = PHY_INTERFACE_MODE_GMII;
|
|
else
|
|
interface = PHY_INTERFACE_MODE_MII;
|
|
} else if (val == bitval[P_RMII_SEL]) {
|
|
interface = PHY_INTERFACE_MODE_RGMII;
|
|
} else {
|
|
interface = PHY_INTERFACE_MODE_RGMII;
|
|
if (data8 & P_RGMII_ID_EG_ENABLE)
|
|
interface = PHY_INTERFACE_MODE_RGMII_TXID;
|
|
if (data8 & P_RGMII_ID_IG_ENABLE) {
|
|
interface = PHY_INTERFACE_MODE_RGMII_RXID;
|
|
if (data8 & P_RGMII_ID_EG_ENABLE)
|
|
interface = PHY_INTERFACE_MODE_RGMII_ID;
|
|
}
|
|
}
|
|
|
|
return interface;
|
|
}
|
|
|
|
static void ksz_phylink_mac_config(struct dsa_switch *ds, int port,
|
|
unsigned int mode,
|
|
const struct phylink_link_state *state)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (ksz_is_ksz88x3(dev))
|
|
return;
|
|
|
|
/* Internal PHYs */
|
|
if (dev->info->internal_phy[port])
|
|
return;
|
|
|
|
if (phylink_autoneg_inband(mode)) {
|
|
dev_err(dev->dev, "In-band AN not supported!\n");
|
|
return;
|
|
}
|
|
|
|
ksz_set_xmii(dev, port, state->interface);
|
|
|
|
if (dev->dev_ops->phylink_mac_config)
|
|
dev->dev_ops->phylink_mac_config(dev, port, mode, state);
|
|
|
|
if (dev->dev_ops->setup_rgmii_delay)
|
|
dev->dev_ops->setup_rgmii_delay(dev, port);
|
|
}
|
|
|
|
bool ksz_get_gbit(struct ksz_device *dev, int port)
|
|
{
|
|
const u8 *bitval = dev->info->xmii_ctrl1;
|
|
const u16 *regs = dev->info->regs;
|
|
bool gbit = false;
|
|
u8 data8;
|
|
bool val;
|
|
|
|
ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
|
|
|
|
val = FIELD_GET(P_GMII_1GBIT_M, data8);
|
|
|
|
if (val == bitval[P_GMII_1GBIT])
|
|
gbit = true;
|
|
|
|
return gbit;
|
|
}
|
|
|
|
static void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit)
|
|
{
|
|
const u8 *bitval = dev->info->xmii_ctrl1;
|
|
const u16 *regs = dev->info->regs;
|
|
u8 data8;
|
|
|
|
ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
|
|
|
|
data8 &= ~P_GMII_1GBIT_M;
|
|
|
|
if (gbit)
|
|
data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_1GBIT]);
|
|
else
|
|
data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_NOT_1GBIT]);
|
|
|
|
/* Write the updated value */
|
|
ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
|
|
}
|
|
|
|
static void ksz_set_100_10mbit(struct ksz_device *dev, int port, int speed)
|
|
{
|
|
const u8 *bitval = dev->info->xmii_ctrl0;
|
|
const u16 *regs = dev->info->regs;
|
|
u8 data8;
|
|
|
|
ksz_pread8(dev, port, regs[P_XMII_CTRL_0], &data8);
|
|
|
|
data8 &= ~P_MII_100MBIT_M;
|
|
|
|
if (speed == SPEED_100)
|
|
data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_100MBIT]);
|
|
else
|
|
data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_10MBIT]);
|
|
|
|
/* Write the updated value */
|
|
ksz_pwrite8(dev, port, regs[P_XMII_CTRL_0], data8);
|
|
}
|
|
|
|
static void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed)
|
|
{
|
|
if (speed == SPEED_1000)
|
|
ksz_set_gbit(dev, port, true);
|
|
else
|
|
ksz_set_gbit(dev, port, false);
|
|
|
|
if (speed == SPEED_100 || speed == SPEED_10)
|
|
ksz_set_100_10mbit(dev, port, speed);
|
|
}
|
|
|
|
static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
|
|
bool tx_pause, bool rx_pause)
|
|
{
|
|
const u8 *bitval = dev->info->xmii_ctrl0;
|
|
const u32 *masks = dev->info->masks;
|
|
const u16 *regs = dev->info->regs;
|
|
u8 mask;
|
|
u8 val;
|
|
|
|
mask = P_MII_DUPLEX_M | masks[P_MII_TX_FLOW_CTRL] |
|
|
masks[P_MII_RX_FLOW_CTRL];
|
|
|
|
if (duplex == DUPLEX_FULL)
|
|
val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_FULL_DUPLEX]);
|
|
else
|
|
val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_HALF_DUPLEX]);
|
|
|
|
if (tx_pause)
|
|
val |= masks[P_MII_TX_FLOW_CTRL];
|
|
|
|
if (rx_pause)
|
|
val |= masks[P_MII_RX_FLOW_CTRL];
|
|
|
|
ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val);
|
|
}
|
|
|
|
static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
|
|
unsigned int mode,
|
|
phy_interface_t interface,
|
|
struct phy_device *phydev, int speed,
|
|
int duplex, bool tx_pause,
|
|
bool rx_pause)
|
|
{
|
|
struct ksz_port *p;
|
|
|
|
p = &dev->ports[port];
|
|
|
|
/* Internal PHYs */
|
|
if (dev->info->internal_phy[port])
|
|
return;
|
|
|
|
p->phydev.speed = speed;
|
|
|
|
ksz_port_set_xmii_speed(dev, port, speed);
|
|
|
|
ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
|
|
}
|
|
|
|
static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
|
|
unsigned int mode,
|
|
phy_interface_t interface,
|
|
struct phy_device *phydev, int speed,
|
|
int duplex, bool tx_pause, bool rx_pause)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (dev->dev_ops->phylink_mac_link_up)
|
|
dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface,
|
|
phydev, speed, duplex,
|
|
tx_pause, rx_pause);
|
|
}
|
|
|
|
static int ksz_switch_detect(struct ksz_device *dev)
|
|
{
|
|
u8 id1, id2, id4;
|
|
u16 id16;
|
|
u32 id32;
|
|
int ret;
|
|
|
|
/* read chip id */
|
|
ret = ksz_read16(dev, REG_CHIP_ID0, &id16);
|
|
if (ret)
|
|
return ret;
|
|
|
|
id1 = FIELD_GET(SW_FAMILY_ID_M, id16);
|
|
id2 = FIELD_GET(SW_CHIP_ID_M, id16);
|
|
|
|
switch (id1) {
|
|
case KSZ87_FAMILY_ID:
|
|
if (id2 == KSZ87_CHIP_ID_95) {
|
|
u8 val;
|
|
|
|
dev->chip_id = KSZ8795_CHIP_ID;
|
|
|
|
ksz_read8(dev, KSZ8_PORT_STATUS_0, &val);
|
|
if (val & KSZ8_PORT_FIBER_MODE)
|
|
dev->chip_id = KSZ8765_CHIP_ID;
|
|
} else if (id2 == KSZ87_CHIP_ID_94) {
|
|
dev->chip_id = KSZ8794_CHIP_ID;
|
|
} else {
|
|
return -ENODEV;
|
|
}
|
|
break;
|
|
case KSZ88_FAMILY_ID:
|
|
if (id2 == KSZ88_CHIP_ID_63)
|
|
dev->chip_id = KSZ8830_CHIP_ID;
|
|
else
|
|
return -ENODEV;
|
|
break;
|
|
default:
|
|
ret = ksz_read32(dev, REG_CHIP_ID0, &id32);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev->chip_rev = FIELD_GET(SW_REV_ID_M, id32);
|
|
id32 &= ~0xFF;
|
|
|
|
switch (id32) {
|
|
case KSZ9477_CHIP_ID:
|
|
case KSZ9896_CHIP_ID:
|
|
case KSZ9897_CHIP_ID:
|
|
case KSZ9567_CHIP_ID:
|
|
case LAN9370_CHIP_ID:
|
|
case LAN9371_CHIP_ID:
|
|
case LAN9372_CHIP_ID:
|
|
case LAN9373_CHIP_ID:
|
|
case LAN9374_CHIP_ID:
|
|
dev->chip_id = id32;
|
|
break;
|
|
case KSZ9893_CHIP_ID:
|
|
ret = ksz_read8(dev, REG_CHIP_ID4,
|
|
&id4);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (id4 == SKU_ID_KSZ8563)
|
|
dev->chip_id = KSZ8563_CHIP_ID;
|
|
else if (id4 == SKU_ID_KSZ9563)
|
|
dev->chip_id = KSZ9563_CHIP_ID;
|
|
else
|
|
dev->chip_id = KSZ9893_CHIP_ID;
|
|
|
|
break;
|
|
default:
|
|
dev_err(dev->dev,
|
|
"unsupported switch detected %x)\n", id32);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Bandwidth is calculated by idle slope/transmission speed. Then the Bandwidth
|
|
* is converted to Hex-decimal using the successive multiplication method. On
|
|
* every step, integer part is taken and decimal part is carry forwarded.
|
|
*/
|
|
static int cinc_cal(s32 idle_slope, s32 send_slope, u32 *bw)
|
|
{
|
|
u32 cinc = 0;
|
|
u32 txrate;
|
|
u32 rate;
|
|
u8 temp;
|
|
u8 i;
|
|
|
|
txrate = idle_slope - send_slope;
|
|
|
|
if (!txrate)
|
|
return -EINVAL;
|
|
|
|
rate = idle_slope;
|
|
|
|
/* 24 bit register */
|
|
for (i = 0; i < 6; i++) {
|
|
rate = rate * 16;
|
|
|
|
temp = rate / txrate;
|
|
|
|
rate %= txrate;
|
|
|
|
cinc = ((cinc << 4) | temp);
|
|
}
|
|
|
|
*bw = cinc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz_setup_tc_mode(struct ksz_device *dev, int port, u8 scheduler,
|
|
u8 shaper)
|
|
{
|
|
return ksz_pwrite8(dev, port, REG_PORT_MTI_QUEUE_CTRL_0,
|
|
FIELD_PREP(MTI_SCHEDULE_MODE_M, scheduler) |
|
|
FIELD_PREP(MTI_SHAPING_M, shaper));
|
|
}
|
|
|
|
static int ksz_setup_tc_cbs(struct dsa_switch *ds, int port,
|
|
struct tc_cbs_qopt_offload *qopt)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
int ret;
|
|
u32 bw;
|
|
|
|
if (!dev->info->tc_cbs_supported)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (qopt->queue > dev->info->num_tx_queues)
|
|
return -EINVAL;
|
|
|
|
/* Queue Selection */
|
|
ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, qopt->queue);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!qopt->enable)
|
|
return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_WRR,
|
|
MTI_SHAPING_OFF);
|
|
|
|
/* High Credit */
|
|
ret = ksz_pwrite16(dev, port, REG_PORT_MTI_HI_WATER_MARK,
|
|
qopt->hicredit);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Low Credit */
|
|
ret = ksz_pwrite16(dev, port, REG_PORT_MTI_LO_WATER_MARK,
|
|
qopt->locredit);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Credit Increment Register */
|
|
ret = cinc_cal(qopt->idleslope, qopt->sendslope, &bw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (dev->dev_ops->tc_cbs_set_cinc) {
|
|
ret = dev->dev_ops->tc_cbs_set_cinc(dev, port, bw);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_STRICT_PRIO,
|
|
MTI_SHAPING_SRP);
|
|
}
|
|
|
|
static int ksz_disable_egress_rate_limit(struct ksz_device *dev, int port)
|
|
{
|
|
int queue, ret;
|
|
|
|
/* Configuration will not take effect until the last Port Queue X
|
|
* Egress Limit Control Register is written.
|
|
*/
|
|
for (queue = 0; queue < dev->info->num_tx_queues; queue++) {
|
|
ret = ksz_pwrite8(dev, port, KSZ9477_REG_PORT_OUT_RATE_0 + queue,
|
|
KSZ9477_OUT_RATE_NO_LIMIT);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params *p,
|
|
int band)
|
|
{
|
|
/* Compared to queues, bands prioritize packets differently. In strict
|
|
* priority mode, the lowest priority is assigned to Queue 0 while the
|
|
* highest priority is given to Band 0.
|
|
*/
|
|
return p->bands - 1 - band;
|
|
}
|
|
|
|
static int ksz_queue_set_strict(struct ksz_device *dev, int port, int queue)
|
|
{
|
|
int ret;
|
|
|
|
ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, queue);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_STRICT_PRIO,
|
|
MTI_SHAPING_OFF);
|
|
}
|
|
|
|
static int ksz_queue_set_wrr(struct ksz_device *dev, int port, int queue,
|
|
int weight)
|
|
{
|
|
int ret;
|
|
|
|
ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, queue);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_WRR,
|
|
MTI_SHAPING_OFF);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ksz_pwrite8(dev, port, KSZ9477_PORT_MTI_QUEUE_CTRL_1, weight);
|
|
}
|
|
|
|
static int ksz_tc_ets_add(struct ksz_device *dev, int port,
|
|
struct tc_ets_qopt_offload_replace_params *p)
|
|
{
|
|
int ret, band, tc_prio;
|
|
u32 queue_map = 0;
|
|
|
|
/* In order to ensure proper prioritization, it is necessary to set the
|
|
* rate limit for the related queue to zero. Otherwise strict priority
|
|
* or WRR mode will not work. This is a hardware limitation.
|
|
*/
|
|
ret = ksz_disable_egress_rate_limit(dev, port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Configure queue scheduling mode for all bands. Currently only strict
|
|
* prio mode is supported.
|
|
*/
|
|
for (band = 0; band < p->bands; band++) {
|
|
int queue = ksz_ets_band_to_queue(p, band);
|
|
|
|
ret = ksz_queue_set_strict(dev, port, queue);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Configure the mapping between traffic classes and queues. Note:
|
|
* priomap variable support 16 traffic classes, but the chip can handle
|
|
* only 8 classes.
|
|
*/
|
|
for (tc_prio = 0; tc_prio < ARRAY_SIZE(p->priomap); tc_prio++) {
|
|
int queue;
|
|
|
|
if (tc_prio > KSZ9477_MAX_TC_PRIO)
|
|
break;
|
|
|
|
queue = ksz_ets_band_to_queue(p, p->priomap[tc_prio]);
|
|
queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S);
|
|
}
|
|
|
|
return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
|
|
}
|
|
|
|
static int ksz_tc_ets_del(struct ksz_device *dev, int port)
|
|
{
|
|
int ret, queue, tc_prio, s;
|
|
u32 queue_map = 0;
|
|
|
|
/* To restore the default chip configuration, set all queues to use the
|
|
* WRR scheduler with a weight of 1.
|
|
*/
|
|
for (queue = 0; queue < dev->info->num_tx_queues; queue++) {
|
|
ret = ksz_queue_set_wrr(dev, port, queue,
|
|
KSZ9477_DEFAULT_WRR_WEIGHT);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
switch (dev->info->num_tx_queues) {
|
|
case 2:
|
|
s = 2;
|
|
break;
|
|
case 4:
|
|
s = 1;
|
|
break;
|
|
case 8:
|
|
s = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Revert the queue mapping for TC-priority to its default setting on
|
|
* the chip.
|
|
*/
|
|
for (tc_prio = 0; tc_prio <= KSZ9477_MAX_TC_PRIO; tc_prio++) {
|
|
int queue;
|
|
|
|
queue = tc_prio >> s;
|
|
queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S);
|
|
}
|
|
|
|
return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
|
|
}
|
|
|
|
static int ksz_tc_ets_validate(struct ksz_device *dev, int port,
|
|
struct tc_ets_qopt_offload_replace_params *p)
|
|
{
|
|
int band;
|
|
|
|
/* Since it is not feasible to share one port among multiple qdisc,
|
|
* the user must configure all available queues appropriately.
|
|
*/
|
|
if (p->bands != dev->info->num_tx_queues) {
|
|
dev_err(dev->dev, "Not supported amount of bands. It should be %d\n",
|
|
dev->info->num_tx_queues);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
for (band = 0; band < p->bands; ++band) {
|
|
/* The KSZ switches utilize a weighted round robin configuration
|
|
* where a certain number of packets can be transmitted from a
|
|
* queue before the next queue is serviced. For more information
|
|
* on this, refer to section 5.2.8.4 of the KSZ8565R
|
|
* documentation on the Port Transmit Queue Control 1 Register.
|
|
* However, the current ETS Qdisc implementation (as of February
|
|
* 2023) assigns a weight to each queue based on the number of
|
|
* bytes or extrapolated bandwidth in percentages. Since this
|
|
* differs from the KSZ switches' method and we don't want to
|
|
* fake support by converting bytes to packets, it is better to
|
|
* return an error instead.
|
|
*/
|
|
if (p->quanta[band]) {
|
|
dev_err(dev->dev, "Quanta/weights configuration is not supported.\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port,
|
|
struct tc_ets_qopt_offload *qopt)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
int ret;
|
|
|
|
if (!dev->info->tc_ets_supported)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (qopt->parent != TC_H_ROOT) {
|
|
dev_err(dev->dev, "Parent should be \"root\"\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
switch (qopt->command) {
|
|
case TC_ETS_REPLACE:
|
|
ret = ksz_tc_ets_validate(dev, port, &qopt->replace_params);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ksz_tc_ets_add(dev, port, &qopt->replace_params);
|
|
case TC_ETS_DESTROY:
|
|
return ksz_tc_ets_del(dev, port);
|
|
case TC_ETS_STATS:
|
|
case TC_ETS_GRAFT:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int ksz_setup_tc(struct dsa_switch *ds, int port,
|
|
enum tc_setup_type type, void *type_data)
|
|
{
|
|
switch (type) {
|
|
case TC_SETUP_QDISC_CBS:
|
|
return ksz_setup_tc_cbs(ds, port, type_data);
|
|
case TC_SETUP_QDISC_ETS:
|
|
return ksz_tc_setup_qdisc_ets(ds, port, type_data);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static const struct dsa_switch_ops ksz_switch_ops = {
|
|
.get_tag_protocol = ksz_get_tag_protocol,
|
|
.connect_tag_protocol = ksz_connect_tag_protocol,
|
|
.get_phy_flags = ksz_get_phy_flags,
|
|
.setup = ksz_setup,
|
|
.teardown = ksz_teardown,
|
|
.phy_read = ksz_phy_read16,
|
|
.phy_write = ksz_phy_write16,
|
|
.phylink_get_caps = ksz_phylink_get_caps,
|
|
.phylink_mac_config = ksz_phylink_mac_config,
|
|
.phylink_mac_link_up = ksz_phylink_mac_link_up,
|
|
.phylink_mac_link_down = ksz_mac_link_down,
|
|
.port_enable = ksz_enable_port,
|
|
.set_ageing_time = ksz_set_ageing_time,
|
|
.get_strings = ksz_get_strings,
|
|
.get_ethtool_stats = ksz_get_ethtool_stats,
|
|
.get_sset_count = ksz_sset_count,
|
|
.port_bridge_join = ksz_port_bridge_join,
|
|
.port_bridge_leave = ksz_port_bridge_leave,
|
|
.port_stp_state_set = ksz_port_stp_state_set,
|
|
.port_pre_bridge_flags = ksz_port_pre_bridge_flags,
|
|
.port_bridge_flags = ksz_port_bridge_flags,
|
|
.port_fast_age = ksz_port_fast_age,
|
|
.port_vlan_filtering = ksz_port_vlan_filtering,
|
|
.port_vlan_add = ksz_port_vlan_add,
|
|
.port_vlan_del = ksz_port_vlan_del,
|
|
.port_fdb_dump = ksz_port_fdb_dump,
|
|
.port_fdb_add = ksz_port_fdb_add,
|
|
.port_fdb_del = ksz_port_fdb_del,
|
|
.port_mdb_add = ksz_port_mdb_add,
|
|
.port_mdb_del = ksz_port_mdb_del,
|
|
.port_mirror_add = ksz_port_mirror_add,
|
|
.port_mirror_del = ksz_port_mirror_del,
|
|
.get_stats64 = ksz_get_stats64,
|
|
.get_pause_stats = ksz_get_pause_stats,
|
|
.port_change_mtu = ksz_change_mtu,
|
|
.port_max_mtu = ksz_max_mtu,
|
|
.get_ts_info = ksz_get_ts_info,
|
|
.port_hwtstamp_get = ksz_hwtstamp_get,
|
|
.port_hwtstamp_set = ksz_hwtstamp_set,
|
|
.port_txtstamp = ksz_port_txtstamp,
|
|
.port_rxtstamp = ksz_port_rxtstamp,
|
|
.port_setup_tc = ksz_setup_tc,
|
|
.get_mac_eee = ksz_get_mac_eee,
|
|
.set_mac_eee = ksz_set_mac_eee,
|
|
};
|
|
|
|
struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
|
|
{
|
|
struct dsa_switch *ds;
|
|
struct ksz_device *swdev;
|
|
|
|
ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
|
|
if (!ds)
|
|
return NULL;
|
|
|
|
ds->dev = base;
|
|
ds->num_ports = DSA_MAX_PORTS;
|
|
ds->ops = &ksz_switch_ops;
|
|
|
|
swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL);
|
|
if (!swdev)
|
|
return NULL;
|
|
|
|
ds->priv = swdev;
|
|
swdev->dev = base;
|
|
|
|
swdev->ds = ds;
|
|
swdev->priv = priv;
|
|
|
|
return swdev;
|
|
}
|
|
EXPORT_SYMBOL(ksz_switch_alloc);
|
|
|
|
static void ksz_parse_rgmii_delay(struct ksz_device *dev, int port_num,
|
|
struct device_node *port_dn)
|
|
{
|
|
phy_interface_t phy_mode = dev->ports[port_num].interface;
|
|
int rx_delay = -1, tx_delay = -1;
|
|
|
|
if (!phy_interface_mode_is_rgmii(phy_mode))
|
|
return;
|
|
|
|
of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay);
|
|
of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay);
|
|
|
|
if (rx_delay == -1 && tx_delay == -1) {
|
|
dev_warn(dev->dev,
|
|
"Port %d interpreting RGMII delay settings based on \"phy-mode\" property, "
|
|
"please update device tree to specify \"rx-internal-delay-ps\" and "
|
|
"\"tx-internal-delay-ps\"",
|
|
port_num);
|
|
|
|
if (phy_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
|
|
phy_mode == PHY_INTERFACE_MODE_RGMII_ID)
|
|
rx_delay = 2000;
|
|
|
|
if (phy_mode == PHY_INTERFACE_MODE_RGMII_TXID ||
|
|
phy_mode == PHY_INTERFACE_MODE_RGMII_ID)
|
|
tx_delay = 2000;
|
|
}
|
|
|
|
if (rx_delay < 0)
|
|
rx_delay = 0;
|
|
if (tx_delay < 0)
|
|
tx_delay = 0;
|
|
|
|
dev->ports[port_num].rgmii_rx_val = rx_delay;
|
|
dev->ports[port_num].rgmii_tx_val = tx_delay;
|
|
}
|
|
|
|
int ksz_switch_register(struct ksz_device *dev)
|
|
{
|
|
const struct ksz_chip_data *info;
|
|
struct device_node *port, *ports;
|
|
phy_interface_t interface;
|
|
unsigned int port_num;
|
|
int ret;
|
|
int i;
|
|
|
|
if (dev->pdata)
|
|
dev->chip_id = dev->pdata->chip_id;
|
|
|
|
dev->reset_gpio = devm_gpiod_get_optional(dev->dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(dev->reset_gpio))
|
|
return PTR_ERR(dev->reset_gpio);
|
|
|
|
if (dev->reset_gpio) {
|
|
gpiod_set_value_cansleep(dev->reset_gpio, 1);
|
|
usleep_range(10000, 12000);
|
|
gpiod_set_value_cansleep(dev->reset_gpio, 0);
|
|
msleep(100);
|
|
}
|
|
|
|
mutex_init(&dev->dev_mutex);
|
|
mutex_init(&dev->regmap_mutex);
|
|
mutex_init(&dev->alu_mutex);
|
|
mutex_init(&dev->vlan_mutex);
|
|
|
|
ret = ksz_switch_detect(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
info = ksz_lookup_info(dev->chip_id);
|
|
if (!info)
|
|
return -ENODEV;
|
|
|
|
/* Update the compatible info with the probed one */
|
|
dev->info = info;
|
|
|
|
dev_info(dev->dev, "found switch: %s, rev %i\n",
|
|
dev->info->dev_name, dev->chip_rev);
|
|
|
|
ret = ksz_check_device_id(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev->dev_ops = dev->info->ops;
|
|
|
|
ret = dev->dev_ops->init(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev->ports = devm_kzalloc(dev->dev,
|
|
dev->info->port_cnt * sizeof(struct ksz_port),
|
|
GFP_KERNEL);
|
|
if (!dev->ports)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < dev->info->port_cnt; i++) {
|
|
spin_lock_init(&dev->ports[i].mib.stats64_lock);
|
|
mutex_init(&dev->ports[i].mib.cnt_mutex);
|
|
dev->ports[i].mib.counters =
|
|
devm_kzalloc(dev->dev,
|
|
sizeof(u64) * (dev->info->mib_cnt + 1),
|
|
GFP_KERNEL);
|
|
if (!dev->ports[i].mib.counters)
|
|
return -ENOMEM;
|
|
|
|
dev->ports[i].ksz_dev = dev;
|
|
dev->ports[i].num = i;
|
|
}
|
|
|
|
/* set the real number of ports */
|
|
dev->ds->num_ports = dev->info->port_cnt;
|
|
|
|
/* Host port interface will be self detected, or specifically set in
|
|
* device tree.
|
|
*/
|
|
for (port_num = 0; port_num < dev->info->port_cnt; ++port_num)
|
|
dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA;
|
|
if (dev->dev->of_node) {
|
|
ret = of_get_phy_mode(dev->dev->of_node, &interface);
|
|
if (ret == 0)
|
|
dev->compat_interface = interface;
|
|
ports = of_get_child_by_name(dev->dev->of_node, "ethernet-ports");
|
|
if (!ports)
|
|
ports = of_get_child_by_name(dev->dev->of_node, "ports");
|
|
if (ports) {
|
|
for_each_available_child_of_node(ports, port) {
|
|
if (of_property_read_u32(port, "reg",
|
|
&port_num))
|
|
continue;
|
|
if (!(dev->port_mask & BIT(port_num))) {
|
|
of_node_put(port);
|
|
of_node_put(ports);
|
|
return -EINVAL;
|
|
}
|
|
of_get_phy_mode(port,
|
|
&dev->ports[port_num].interface);
|
|
|
|
ksz_parse_rgmii_delay(dev, port_num, port);
|
|
}
|
|
of_node_put(ports);
|
|
}
|
|
dev->synclko_125 = of_property_read_bool(dev->dev->of_node,
|
|
"microchip,synclko-125");
|
|
dev->synclko_disable = of_property_read_bool(dev->dev->of_node,
|
|
"microchip,synclko-disable");
|
|
if (dev->synclko_125 && dev->synclko_disable) {
|
|
dev_err(dev->dev, "inconsistent synclko settings\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
ret = dsa_register_switch(dev->ds);
|
|
if (ret) {
|
|
dev->dev_ops->exit(dev);
|
|
return ret;
|
|
}
|
|
|
|
/* Read MIB counters every 30 seconds to avoid overflow. */
|
|
dev->mib_read_interval = msecs_to_jiffies(5000);
|
|
|
|
/* Start the MIB timer. */
|
|
schedule_delayed_work(&dev->mib_read, 0);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(ksz_switch_register);
|
|
|
|
void ksz_switch_remove(struct ksz_device *dev)
|
|
{
|
|
/* timer started */
|
|
if (dev->mib_read_interval) {
|
|
dev->mib_read_interval = 0;
|
|
cancel_delayed_work_sync(&dev->mib_read);
|
|
}
|
|
|
|
dev->dev_ops->exit(dev);
|
|
dsa_unregister_switch(dev->ds);
|
|
|
|
if (dev->reset_gpio)
|
|
gpiod_set_value_cansleep(dev->reset_gpio, 1);
|
|
|
|
}
|
|
EXPORT_SYMBOL(ksz_switch_remove);
|
|
|
|
MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
|
|
MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver");
|
|
MODULE_LICENSE("GPL");
|