linux/arch/x86/pci/acpi.c
Jiang Liu 965cd0e4a5 x86, PCI, ACPI: Use kmalloc_node() to optimize for performance
Use kmalloc_node() instead of kmalloc() when possible to optimize
for performance on NUMA platforms.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1402302011-23642-6-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-21 23:05:40 +02:00

603 lines
15 KiB
C

#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/dmi.h>
#include <linux/slab.h>
#include <asm/numa.h>
#include <asm/pci_x86.h>
struct pci_root_info {
struct acpi_device *bridge;
char name[16];
unsigned int res_num;
struct resource *res;
resource_size_t *res_offset;
struct pci_sysdata sd;
#ifdef CONFIG_PCI_MMCONFIG
bool mcfg_added;
u16 segment;
u8 start_bus;
u8 end_bus;
#endif
};
static bool pci_use_crs = true;
static bool pci_ignore_seg = false;
static int __init set_use_crs(const struct dmi_system_id *id)
{
pci_use_crs = true;
return 0;
}
static int __init set_nouse_crs(const struct dmi_system_id *id)
{
pci_use_crs = false;
return 0;
}
static int __init set_ignore_seg(const struct dmi_system_id *id)
{
printk(KERN_INFO "PCI: %s detected: ignoring ACPI _SEG\n", id->ident);
pci_ignore_seg = true;
return 0;
}
static const struct dmi_system_id pci_crs_quirks[] __initconst = {
/* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
{
.callback = set_use_crs,
.ident = "IBM System x3800",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
},
},
/* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */
/* 2006 AMD HT/VIA system with two host bridges */
{
.callback = set_use_crs,
.ident = "ASRock ALiveSATA2-GLAN",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
},
},
/* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */
/* 2006 AMD HT/VIA system with two host bridges */
{
.callback = set_use_crs,
.ident = "ASUS M2V-MX SE",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"),
DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
},
},
/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
{
.callback = set_use_crs,
.ident = "MSI MS-7253",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
},
},
/* Now for the blacklist.. */
/* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
{
.callback = set_nouse_crs,
.ident = "Dell Studio 1557",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"),
DMI_MATCH(DMI_BIOS_VERSION, "A09"),
},
},
/* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
{
.callback = set_nouse_crs,
.ident = "Thinkpad SL510",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
DMI_MATCH(DMI_BOARD_NAME, "2847DFG"),
DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"),
},
},
/* https://bugzilla.kernel.org/show_bug.cgi?id=15362 */
{
.callback = set_ignore_seg,
.ident = "HP xw9300",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
},
},
{}
};
void __init pci_acpi_crs_quirks(void)
{
int year;
if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008)
pci_use_crs = false;
dmi_check_system(pci_crs_quirks);
/*
* If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
* takes precedence over anything we figured out above.
*/
if (pci_probe & PCI_ROOT_NO_CRS)
pci_use_crs = false;
else if (pci_probe & PCI_USE__CRS)
pci_use_crs = true;
printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
"if necessary, use \"pci=%s\" and report a bug\n",
pci_use_crs ? "Using" : "Ignoring",
pci_use_crs ? "nocrs" : "use_crs");
}
#ifdef CONFIG_PCI_MMCONFIG
static int check_segment(u16 seg, struct device *dev, char *estr)
{
if (seg) {
dev_err(dev,
"%s can't access PCI configuration "
"space under this host bridge.\n",
estr);
return -EIO;
}
/*
* Failure in adding MMCFG information is not fatal,
* just can't access extended configuration space of
* devices under this host bridge.
*/
dev_warn(dev,
"%s can't access extended PCI configuration "
"space under this bridge.\n",
estr);
return 0;
}
static int setup_mcfg_map(struct pci_root_info *info, u16 seg, u8 start,
u8 end, phys_addr_t addr)
{
int result;
struct device *dev = &info->bridge->dev;
info->start_bus = start;
info->end_bus = end;
info->mcfg_added = false;
/* return success if MMCFG is not in use */
if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg)
return 0;
if (!(pci_probe & PCI_PROBE_MMCONF))
return check_segment(seg, dev, "MMCONFIG is disabled,");
result = pci_mmconfig_insert(dev, seg, start, end, addr);
if (result == 0) {
/* enable MMCFG if it hasn't been enabled yet */
if (raw_pci_ext_ops == NULL)
raw_pci_ext_ops = &pci_mmcfg;
info->mcfg_added = true;
} else if (result != -EEXIST)
return check_segment(seg, dev,
"fail to add MMCONFIG information,");
return 0;
}
static void teardown_mcfg_map(struct pci_root_info *info)
{
if (info->mcfg_added) {
pci_mmconfig_delete(info->segment, info->start_bus,
info->end_bus);
info->mcfg_added = false;
}
}
#else
static int setup_mcfg_map(struct pci_root_info *info,
u16 seg, u8 start, u8 end,
phys_addr_t addr)
{
return 0;
}
static void teardown_mcfg_map(struct pci_root_info *info)
{
}
#endif
static acpi_status resource_to_addr(struct acpi_resource *resource,
struct acpi_resource_address64 *addr)
{
acpi_status status;
struct acpi_resource_memory24 *memory24;
struct acpi_resource_memory32 *memory32;
struct acpi_resource_fixed_memory32 *fixed_memory32;
memset(addr, 0, sizeof(*addr));
switch (resource->type) {
case ACPI_RESOURCE_TYPE_MEMORY24:
memory24 = &resource->data.memory24;
addr->resource_type = ACPI_MEMORY_RANGE;
addr->minimum = memory24->minimum;
addr->address_length = memory24->address_length;
addr->maximum = addr->minimum + addr->address_length - 1;
return AE_OK;
case ACPI_RESOURCE_TYPE_MEMORY32:
memory32 = &resource->data.memory32;
addr->resource_type = ACPI_MEMORY_RANGE;
addr->minimum = memory32->minimum;
addr->address_length = memory32->address_length;
addr->maximum = addr->minimum + addr->address_length - 1;
return AE_OK;
case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
fixed_memory32 = &resource->data.fixed_memory32;
addr->resource_type = ACPI_MEMORY_RANGE;
addr->minimum = fixed_memory32->address;
addr->address_length = fixed_memory32->address_length;
addr->maximum = addr->minimum + addr->address_length - 1;
return AE_OK;
case ACPI_RESOURCE_TYPE_ADDRESS16:
case ACPI_RESOURCE_TYPE_ADDRESS32:
case ACPI_RESOURCE_TYPE_ADDRESS64:
status = acpi_resource_to_address64(resource, addr);
if (ACPI_SUCCESS(status) &&
(addr->resource_type == ACPI_MEMORY_RANGE ||
addr->resource_type == ACPI_IO_RANGE) &&
addr->address_length > 0) {
return AE_OK;
}
break;
}
return AE_ERROR;
}
static acpi_status count_resource(struct acpi_resource *acpi_res, void *data)
{
struct pci_root_info *info = data;
struct acpi_resource_address64 addr;
acpi_status status;
status = resource_to_addr(acpi_res, &addr);
if (ACPI_SUCCESS(status))
info->res_num++;
return AE_OK;
}
static acpi_status setup_resource(struct acpi_resource *acpi_res, void *data)
{
struct pci_root_info *info = data;
struct resource *res;
struct acpi_resource_address64 addr;
acpi_status status;
unsigned long flags;
u64 start, orig_end, end;
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
return AE_OK;
if (addr.resource_type == ACPI_MEMORY_RANGE) {
flags = IORESOURCE_MEM;
if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
flags |= IORESOURCE_PREFETCH;
} else if (addr.resource_type == ACPI_IO_RANGE) {
flags = IORESOURCE_IO;
} else
return AE_OK;
start = addr.minimum + addr.translation_offset;
orig_end = end = addr.maximum + addr.translation_offset;
/* Exclude non-addressable range or non-addressable portion of range */
end = min(end, (u64)iomem_resource.end);
if (end <= start) {
dev_info(&info->bridge->dev,
"host bridge window [%#llx-%#llx] "
"(ignored, not CPU addressable)\n", start, orig_end);
return AE_OK;
} else if (orig_end != end) {
dev_info(&info->bridge->dev,
"host bridge window [%#llx-%#llx] "
"([%#llx-%#llx] ignored, not CPU addressable)\n",
start, orig_end, end + 1, orig_end);
}
res = &info->res[info->res_num];
res->name = info->name;
res->flags = flags;
res->start = start;
res->end = end;
info->res_offset[info->res_num] = addr.translation_offset;
info->res_num++;
if (!pci_use_crs)
dev_printk(KERN_DEBUG, &info->bridge->dev,
"host bridge window %pR (ignored)\n", res);
return AE_OK;
}
static void coalesce_windows(struct pci_root_info *info, unsigned long type)
{
int i, j;
struct resource *res1, *res2;
for (i = 0; i < info->res_num; i++) {
res1 = &info->res[i];
if (!(res1->flags & type))
continue;
for (j = i + 1; j < info->res_num; j++) {
res2 = &info->res[j];
if (!(res2->flags & type))
continue;
/*
* I don't like throwing away windows because then
* our resources no longer match the ACPI _CRS, but
* the kernel resource tree doesn't allow overlaps.
*/
if (resource_overlaps(res1, res2)) {
res2->start = min(res1->start, res2->start);
res2->end = max(res1->end, res2->end);
dev_info(&info->bridge->dev,
"host bridge window expanded to %pR; %pR ignored\n",
res2, res1);
res1->flags = 0;
}
}
}
}
static void add_resources(struct pci_root_info *info,
struct list_head *resources)
{
int i;
struct resource *res, *root, *conflict;
coalesce_windows(info, IORESOURCE_MEM);
coalesce_windows(info, IORESOURCE_IO);
for (i = 0; i < info->res_num; i++) {
res = &info->res[i];
if (res->flags & IORESOURCE_MEM)
root = &iomem_resource;
else if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
else
continue;
conflict = insert_resource_conflict(root, res);
if (conflict)
dev_info(&info->bridge->dev,
"ignoring host bridge window %pR (conflicts with %s %pR)\n",
res, conflict->name, conflict);
else
pci_add_resource_offset(resources, res,
info->res_offset[i]);
}
}
static void free_pci_root_info_res(struct pci_root_info *info)
{
kfree(info->res);
info->res = NULL;
kfree(info->res_offset);
info->res_offset = NULL;
info->res_num = 0;
}
static void __release_pci_root_info(struct pci_root_info *info)
{
int i;
struct resource *res;
for (i = 0; i < info->res_num; i++) {
res = &info->res[i];
if (!res->parent)
continue;
if (!(res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
continue;
release_resource(res);
}
free_pci_root_info_res(info);
teardown_mcfg_map(info);
kfree(info);
}
static void release_pci_root_info(struct pci_host_bridge *bridge)
{
struct pci_root_info *info = bridge->release_data;
__release_pci_root_info(info);
}
static void probe_pci_root_info(struct pci_root_info *info,
struct acpi_device *device,
int busnum, int domain)
{
size_t size;
sprintf(info->name, "PCI Bus %04x:%02x", domain, busnum);
info->bridge = device;
info->res_num = 0;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource,
info);
if (!info->res_num)
return;
size = sizeof(*info->res) * info->res_num;
info->res = kzalloc_node(size, GFP_KERNEL, info->sd.node);
if (!info->res) {
info->res_num = 0;
return;
}
size = sizeof(*info->res_offset) * info->res_num;
info->res_num = 0;
info->res_offset = kzalloc_node(size, GFP_KERNEL, info->sd.node);
if (!info->res_offset) {
kfree(info->res);
info->res = NULL;
return;
}
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
info);
}
struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
{
struct acpi_device *device = root->device;
struct pci_root_info *info;
int domain = root->segment;
int busnum = root->secondary.start;
LIST_HEAD(resources);
struct pci_bus *bus;
struct pci_sysdata *sd;
int node;
if (pci_ignore_seg)
domain = 0;
if (domain && !pci_domains_supported) {
printk(KERN_WARNING "pci_bus %04x:%02x: "
"ignored (multiple domains not supported)\n",
domain, busnum);
return NULL;
}
node = acpi_get_node(device->handle);
if (node == NUMA_NO_NODE) {
node = x86_pci_root_bus_node(busnum);
if (node != 0 && node != NUMA_NO_NODE)
dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n",
node);
}
if (node != NUMA_NO_NODE && !node_online(node))
node = NUMA_NO_NODE;
info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
if (!info) {
printk(KERN_WARNING "pci_bus %04x:%02x: "
"ignored (out of memory)\n", domain, busnum);
return NULL;
}
sd = &info->sd;
sd->domain = domain;
sd->node = node;
sd->companion = device;
bus = pci_find_bus(domain, busnum);
if (bus) {
/*
* If the desired bus has been scanned already, replace
* its bus->sysdata.
*/
memcpy(bus->sysdata, sd, sizeof(*sd));
kfree(info);
} else {
probe_pci_root_info(info, device, busnum, domain);
/* insert busn res at first */
pci_add_resource(&resources, &root->secondary);
/*
* _CRS with no apertures is normal, so only fall back to
* defaults or native bridge info if we're ignoring _CRS.
*/
if (pci_use_crs)
add_resources(info, &resources);
else {
free_pci_root_info_res(info);
x86_pci_root_bus_resources(busnum, &resources);
}
if (!setup_mcfg_map(info, domain, (u8)root->secondary.start,
(u8)root->secondary.end, root->mcfg_addr))
bus = pci_create_root_bus(NULL, busnum, &pci_root_ops,
sd, &resources);
if (bus) {
pci_scan_child_bus(bus);
pci_set_host_bridge_release(
to_pci_host_bridge(bus->bridge),
release_pci_root_info, info);
} else {
pci_free_resource_list(&resources);
__release_pci_root_info(info);
}
}
/* After the PCI-E bus has been walked and all devices discovered,
* configure any settings of the fabric that might be necessary.
*/
if (bus) {
struct pci_bus *child;
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
}
if (bus && node != NUMA_NO_NODE)
dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
return bus;
}
int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
{
struct pci_sysdata *sd = bridge->bus->sysdata;
ACPI_COMPANION_SET(&bridge->dev, sd->companion);
return 0;
}
int __init pci_acpi_init(void)
{
struct pci_dev *dev = NULL;
if (acpi_noirq)
return -ENODEV;
printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
acpi_irq_penalty_init();
pcibios_enable_irq = acpi_pci_irq_enable;
pcibios_disable_irq = acpi_pci_irq_disable;
x86_init.pci.init_irq = x86_init_noop;
if (pci_routeirq) {
/*
* PCI IRQ routing is set up by pci_enable_device(), but we
* also do it here in case there are still broken drivers that
* don't use pci_enable_device().
*/
printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
for_each_pci_dev(dev)
acpi_pci_irq_enable(dev);
}
return 0;
}