linux/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
Thomas Gleixner 2aec85b26f treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE (part 2)
Based on the normalized pattern:

    this program is free software you can redistribute it and/or modify it
    under the terms of the gnu general public license as published by the
    free software foundation version 2  this program is distributed as is
    without any warranty of any kind whether express or implied without
    even the implied warranty of merchantability or fitness for a
    particular purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

    GPL-2.0-only

has been chosen to replace the boilerplate/reference.

Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 14:51:35 +02:00

90 lines
2.0 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
// Copyright (C) 2016 Broadcom
#include <linux/device.h>
#include <linux/module.h>
#include <linux/of_mdio.h>
#include <linux/mdio.h>
#include <linux/phy.h>
#include <linux/phy/phy.h>
#define BLK_ADDR_REG_OFFSET 0x1f
#define PLL_AFE1_100MHZ_BLK 0x2100
#define PLL_CLK_AMP_OFFSET 0x03
#define PLL_CLK_AMP_2P05V 0x2b18
static int ns2_pci_phy_init(struct phy *p)
{
struct mdio_device *mdiodev = phy_get_drvdata(p);
int rc;
/* select the AFE 100MHz block page */
rc = mdiodev_write(mdiodev, BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
if (rc)
goto err;
/* set the 100 MHz reference clock amplitude to 2.05 v */
rc = mdiodev_write(mdiodev, PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
if (rc)
goto err;
return 0;
err:
dev_err(&mdiodev->dev, "Error %d writing to phy\n", rc);
return rc;
}
static const struct phy_ops ns2_pci_phy_ops = {
.init = ns2_pci_phy_init,
.owner = THIS_MODULE,
};
static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
{
struct device *dev = &mdiodev->dev;
struct phy_provider *provider;
struct phy *phy;
phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops);
if (IS_ERR(phy)) {
dev_err(dev, "failed to create Phy\n");
return PTR_ERR(phy);
}
phy_set_drvdata(phy, mdiodev);
provider = devm_of_phy_provider_register(&phy->dev,
of_phy_simple_xlate);
if (IS_ERR(provider)) {
dev_err(dev, "failed to register Phy provider\n");
return PTR_ERR(provider);
}
dev_info(dev, "%s PHY registered\n", dev_name(dev));
return 0;
}
static const struct of_device_id ns2_pci_phy_of_match[] = {
{ .compatible = "brcm,ns2-pcie-phy", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, ns2_pci_phy_of_match);
static struct mdio_driver ns2_pci_phy_driver = {
.mdiodrv = {
.driver = {
.name = "phy-bcm-ns2-pci",
.of_match_table = ns2_pci_phy_of_match,
},
},
.probe = ns2_pci_phy_probe,
};
mdio_module_driver(ns2_pci_phy_driver);
MODULE_AUTHOR("Broadcom");
MODULE_DESCRIPTION("Broadcom Northstar2 PCI Phy driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:phy-bcm-ns2-pci");