mirror of
https://github.com/torvalds/linux.git
synced 2024-11-11 06:31:49 +00:00
9776dd3609
Support for posted interrupts on bare metal
Posted interrupts is a virtualization feature which allows to inject
interrupts directly into a guest without host interaction. The VT-d
interrupt remapping hardware sets the bit which corresponds to the
interrupt vector in a vector bitmap which is either used to inject the
interrupt directly into the guest via a virtualized APIC or in case
that the guest is scheduled out provides a host side notification
interrupt which informs the host that an interrupt has been marked
pending in the bitmap.
This can be utilized on bare metal for scenarios where multiple
devices, e.g. NVME storage, raise interrupts with a high frequency. In
the default mode these interrupts are handles independently and
therefore require a full roundtrip of interrupt entry/exit.
Utilizing posted interrupts this roundtrip overhead can be avoided by
coalescing these interrupt entries to a single entry for the posted
interrupt notification. The notification interrupt then demultiplexes
the pending bits in a memory based bitmap and invokes the corresponding
device specific handlers.
Depending on the usage scenario and device utilization throughput
improvements between 10% and 130% have been measured.
As this is only relevant for high end servers with multiple device
queues per CPU attached and counterproductive for situations where
interrupts are arriving at distinct times, the functionality is opt-in
via a kernel command line parameter.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmZBGUITHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYod3xD/98Xa4qZN7eceyyGUhgXnPLOKQzGQ7k
7cmhsoAYjABeXLvuAvtKePL7ky7OPcqVW2E/g0+jdZuRDkRDbnVkM7CDMRTyL0/b
BZLhVAXyANKjK79a5WvjL0zDasYQRQ16MQJ6TPa++mX0KhZSI7KvXWIqPWov5i02
n8UbPUraH5bJi3qGKm6u4n2261Be1gtDag0ZjmGma45/3wsn3bWPoB7iPK6qxmq3
Q7VARPXAcRp5wYACk6mCOM1dOXMUV9CgI5AUk92xGfXi4RAdsFeNSzeQWn9jHWOf
CYbbJjNl4QmGP4IWmy6/Up4vIiEhUCOT2DmHsygrQTs/G+nPnMAe1qUuDuECiofj
iToBL3hn1dHG8uINKOB81MJ33QEGWyYWY8PxxoR3LMTrhVpfChUlJO8T2XK5nu+i
2EA6XLtJiHacpXhn8HQam0aQN9nvi4wT1LzpkhmboyCQuXTiXuJNbyLIh5TdFa1n
DzqAGhRB67z6eGevJJ7kTI1X71W0poMwYlzCU8itnLOK8np0zFQ8bgwwqm9opZGq
V2eSDuZAbqXVolzmaF8NSfM+b/R9URQtWsZ8cEc+/OdVV4HR4zfeqejy60TuV/4G
39CTnn8vPBKcRSS6CAcJhKPhzIvHw4EMhoU4DJKBtwBdM58RyP9NY1wF3rIPJIGh
sl61JBuYYuIZXg==
=bqLN
-----END PGP SIGNATURE-----
Merge tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 interrupt handling updates from Thomas Gleixner:
"Add support for posted interrupts on bare metal.
Posted interrupts is a virtualization feature which allows to inject
interrupts directly into a guest without host interaction. The VT-d
interrupt remapping hardware sets the bit which corresponds to the
interrupt vector in a vector bitmap which is either used to inject the
interrupt directly into the guest via a virtualized APIC or in case
that the guest is scheduled out provides a host side notification
interrupt which informs the host that an interrupt has been marked
pending in the bitmap.
This can be utilized on bare metal for scenarios where multiple
devices, e.g. NVME storage, raise interrupts with a high frequency. In
the default mode these interrupts are handles independently and
therefore require a full roundtrip of interrupt entry/exit.
Utilizing posted interrupts this roundtrip overhead can be avoided by
coalescing these interrupt entries to a single entry for the posted
interrupt notification. The notification interrupt then demultiplexes
the pending bits in a memory based bitmap and invokes the
corresponding device specific handlers.
Depending on the usage scenario and device utilization throughput
improvements between 10% and 130% have been measured.
As this is only relevant for high end servers with multiple device
queues per CPU attached and counterproductive for situations where
interrupts are arriving at distinct times, the functionality is opt-in
via a kernel command line parameter"
* tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Use existing helper for pending vector check
iommu/vt-d: Enable posted mode for device MSIs
iommu/vt-d: Make posted MSI an opt-in command line option
x86/irq: Extend checks for pending vectors to posted interrupts
x86/irq: Factor out common code for checking pending interrupts
x86/irq: Install posted MSI notification handler
x86/irq: Factor out handler invocation from common_interrupt()
x86/irq: Set up per host CPU posted interrupt descriptors
x86/irq: Reserve a per CPU IDT vector for posted MSIs
x86/irq: Add a Kconfig option for posted MSI
x86/irq: Remove bitfields in posted interrupt descriptor
x86/irq: Unionize PID.PIR for 64bit access w/o casting
KVM: VMX: Move posted interrupt descriptor out of VMX code
|
||
|---|---|---|
| .. | ||
| amd | ||
| arm | ||
| intel | ||
| iommufd | ||
| apple-dart.c | ||
| dma-iommu.c | ||
| dma-iommu.h | ||
| exynos-iommu.c | ||
| fsl_pamu_domain.c | ||
| fsl_pamu_domain.h | ||
| fsl_pamu.c | ||
| fsl_pamu.h | ||
| hyperv-iommu.c | ||
| io-pgfault.c | ||
| io-pgtable-arm-v7s.c | ||
| io-pgtable-arm.c | ||
| io-pgtable-arm.h | ||
| io-pgtable-dart.c | ||
| io-pgtable.c | ||
| iommu-debugfs.c | ||
| iommu-priv.h | ||
| iommu-sva.c | ||
| iommu-sysfs.c | ||
| iommu-traces.c | ||
| iommu.c | ||
| iova.c | ||
| ipmmu-vmsa.c | ||
| irq_remapping.c | ||
| irq_remapping.h | ||
| Kconfig | ||
| Makefile | ||
| msm_iommu_hw-8xxx.h | ||
| msm_iommu.c | ||
| msm_iommu.h | ||
| mtk_iommu_v1.c | ||
| mtk_iommu.c | ||
| of_iommu.c | ||
| omap-iommu-debug.c | ||
| omap-iommu.c | ||
| omap-iommu.h | ||
| omap-iopgtable.h | ||
| rockchip-iommu.c | ||
| s390-iommu.c | ||
| sprd-iommu.c | ||
| sun50i-iommu.c | ||
| tegra-smmu.c | ||
| virtio-iommu.c | ||