mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 09:02:00 +00:00
3e1b776c2b
Make the device i2c0 common to plat-s3c and move the definitions from arch/arm/plat-s3c24xx/devs.c Signed-off-by: Ben Dooks <ben-linux@fluff.org>
625 lines
14 KiB
C
625 lines
14 KiB
C
/* linux/arch/arm/mach-s3c2410/mach-bast.c
|
|
*
|
|
* Copyright (c) 2003-2005,2008 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* http://www.simtec.co.uk/products/EB2410ITX/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/list.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/init.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dm9000.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <net/ax88796.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <mach/bast-map.h>
|
|
#include <mach/bast-irq.h>
|
|
#include <mach/bast-cpld.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
//#include <asm/debug-ll.h>
|
|
#include <plat/regs-serial.h>
|
|
#include <mach/regs-gpio.h>
|
|
#include <mach/regs-mem.h>
|
|
#include <mach/regs-lcd.h>
|
|
|
|
#include <plat/nand.h>
|
|
#include <plat/iic.h>
|
|
#include <mach/fb.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/nand_ecc.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <linux/serial_8250.h>
|
|
|
|
#include <plat/clock.h>
|
|
#include <plat/devs.h>
|
|
#include <plat/cpu.h>
|
|
|
|
#include "usb-simtec.h"
|
|
#include "nor-simtec.h"
|
|
|
|
#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
|
|
|
|
/* macros for virtual address mods for the io space entries */
|
|
#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
|
|
#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
|
|
#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
|
|
#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
|
|
|
|
/* macros to modify the physical addresses for io space */
|
|
|
|
#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
|
|
#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
|
|
#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
|
|
#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
|
|
|
|
static struct map_desc bast_iodesc[] __initdata = {
|
|
/* ISA IO areas */
|
|
{
|
|
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
|
|
.pfn = PA_CS2(BAST_PA_ISAIO),
|
|
.length = SZ_16M,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)S3C24XX_VA_ISA_WORD,
|
|
.pfn = PA_CS3(BAST_PA_ISAIO),
|
|
.length = SZ_16M,
|
|
.type = MT_DEVICE,
|
|
},
|
|
/* bast CPLD control registers, and external interrupt controls */
|
|
{
|
|
.virtual = (u32)BAST_VA_CTRL1,
|
|
.pfn = __phys_to_pfn(BAST_PA_CTRL1),
|
|
.length = SZ_1M,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)BAST_VA_CTRL2,
|
|
.pfn = __phys_to_pfn(BAST_PA_CTRL2),
|
|
.length = SZ_1M,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)BAST_VA_CTRL3,
|
|
.pfn = __phys_to_pfn(BAST_PA_CTRL3),
|
|
.length = SZ_1M,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)BAST_VA_CTRL4,
|
|
.pfn = __phys_to_pfn(BAST_PA_CTRL4),
|
|
.length = SZ_1M,
|
|
.type = MT_DEVICE,
|
|
},
|
|
/* PC104 IRQ mux */
|
|
{
|
|
.virtual = (u32)BAST_VA_PC104_IRQREQ,
|
|
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ),
|
|
.length = SZ_1M,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)BAST_VA_PC104_IRQRAW,
|
|
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW),
|
|
.length = SZ_1M,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)BAST_VA_PC104_IRQMASK,
|
|
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK),
|
|
.length = SZ_1M,
|
|
.type = MT_DEVICE,
|
|
},
|
|
|
|
/* peripheral space... one for each of fast/slow/byte/16bit */
|
|
/* note, ide is only decoded in word space, even though some registers
|
|
* are only 8bit */
|
|
|
|
/* slow, byte */
|
|
{ VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
|
|
{ VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
|
|
{ VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
|
|
|
|
/* slow, word */
|
|
{ VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
|
|
{ VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
|
|
{ VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
|
|
|
|
/* fast, byte */
|
|
{ VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
|
|
{ VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
|
|
{ VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
|
|
|
|
/* fast, word */
|
|
{ VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
|
|
{ VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
|
|
{ VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
|
|
};
|
|
|
|
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
|
|
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
|
|
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
|
|
|
|
static struct s3c24xx_uart_clksrc bast_serial_clocks[] = {
|
|
[0] = {
|
|
.name = "uclk",
|
|
.divisor = 1,
|
|
.min_baud = 0,
|
|
.max_baud = 0,
|
|
},
|
|
[1] = {
|
|
.name = "pclk",
|
|
.divisor = 1,
|
|
.min_baud = 0,
|
|
.max_baud = 0,
|
|
}
|
|
};
|
|
|
|
|
|
static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
|
|
[0] = {
|
|
.hwport = 0,
|
|
.flags = 0,
|
|
.ucon = UCON,
|
|
.ulcon = ULCON,
|
|
.ufcon = UFCON,
|
|
.clocks = bast_serial_clocks,
|
|
.clocks_size = ARRAY_SIZE(bast_serial_clocks),
|
|
},
|
|
[1] = {
|
|
.hwport = 1,
|
|
.flags = 0,
|
|
.ucon = UCON,
|
|
.ulcon = ULCON,
|
|
.ufcon = UFCON,
|
|
.clocks = bast_serial_clocks,
|
|
.clocks_size = ARRAY_SIZE(bast_serial_clocks),
|
|
},
|
|
/* port 2 is not actually used */
|
|
[2] = {
|
|
.hwport = 2,
|
|
.flags = 0,
|
|
.ucon = UCON,
|
|
.ulcon = ULCON,
|
|
.ufcon = UFCON,
|
|
.clocks = bast_serial_clocks,
|
|
.clocks_size = ARRAY_SIZE(bast_serial_clocks),
|
|
}
|
|
};
|
|
|
|
/* NAND Flash on BAST board */
|
|
|
|
#ifdef CONFIG_PM
|
|
static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
|
|
{
|
|
/* ensure that an nRESET is not generated on resume. */
|
|
s3c2410_gpio_setpin(S3C2410_GPA21, 1);
|
|
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bast_pm_resume(struct sys_device *sd)
|
|
{
|
|
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define bast_pm_suspend NULL
|
|
#define bast_pm_resume NULL
|
|
#endif
|
|
|
|
static struct sysdev_class bast_pm_sysclass = {
|
|
.name = "mach-bast",
|
|
.suspend = bast_pm_suspend,
|
|
.resume = bast_pm_resume,
|
|
};
|
|
|
|
static struct sys_device bast_pm_sysdev = {
|
|
.cls = &bast_pm_sysclass,
|
|
};
|
|
|
|
static int smartmedia_map[] = { 0 };
|
|
static int chip0_map[] = { 1 };
|
|
static int chip1_map[] = { 2 };
|
|
static int chip2_map[] = { 3 };
|
|
|
|
static struct mtd_partition bast_default_nand_part[] = {
|
|
[0] = {
|
|
.name = "Boot Agent",
|
|
.size = SZ_16K,
|
|
.offset = 0,
|
|
},
|
|
[1] = {
|
|
.name = "/boot",
|
|
.size = SZ_4M - SZ_16K,
|
|
.offset = SZ_16K,
|
|
},
|
|
[2] = {
|
|
.name = "user",
|
|
.offset = SZ_4M,
|
|
.size = MTDPART_SIZ_FULL,
|
|
}
|
|
};
|
|
|
|
/* the bast has 4 selectable slots for nand-flash, the three
|
|
* on-board chip areas, as well as the external SmartMedia
|
|
* slot.
|
|
*
|
|
* Note, there is no current hot-plug support for the SmartMedia
|
|
* socket.
|
|
*/
|
|
|
|
static struct s3c2410_nand_set bast_nand_sets[] = {
|
|
[0] = {
|
|
.name = "SmartMedia",
|
|
.nr_chips = 1,
|
|
.nr_map = smartmedia_map,
|
|
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
|
|
.partitions = bast_default_nand_part,
|
|
},
|
|
[1] = {
|
|
.name = "chip0",
|
|
.nr_chips = 1,
|
|
.nr_map = chip0_map,
|
|
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
|
|
.partitions = bast_default_nand_part,
|
|
},
|
|
[2] = {
|
|
.name = "chip1",
|
|
.nr_chips = 1,
|
|
.nr_map = chip1_map,
|
|
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
|
|
.partitions = bast_default_nand_part,
|
|
},
|
|
[3] = {
|
|
.name = "chip2",
|
|
.nr_chips = 1,
|
|
.nr_map = chip2_map,
|
|
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
|
|
.partitions = bast_default_nand_part,
|
|
}
|
|
};
|
|
|
|
static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
slot = set->nr_map[slot] & 3;
|
|
|
|
pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
|
|
slot, set, set->nr_map);
|
|
|
|
tmp = __raw_readb(BAST_VA_CTRL2);
|
|
tmp &= BAST_CPLD_CTLR2_IDERST;
|
|
tmp |= slot;
|
|
tmp |= BAST_CPLD_CTRL2_WNAND;
|
|
|
|
pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
|
|
|
|
__raw_writeb(tmp, BAST_VA_CTRL2);
|
|
}
|
|
|
|
static struct s3c2410_platform_nand bast_nand_info = {
|
|
.tacls = 30,
|
|
.twrph0 = 60,
|
|
.twrph1 = 60,
|
|
.nr_sets = ARRAY_SIZE(bast_nand_sets),
|
|
.sets = bast_nand_sets,
|
|
.select_chip = bast_nand_select,
|
|
};
|
|
|
|
/* DM9000 */
|
|
|
|
static struct resource bast_dm9k_resource[] = {
|
|
[0] = {
|
|
.start = S3C2410_CS5 + BAST_PA_DM9000,
|
|
.end = S3C2410_CS5 + BAST_PA_DM9000 + 3,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
|
|
.end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = IRQ_DM9000,
|
|
.end = IRQ_DM9000,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
|
|
}
|
|
|
|
};
|
|
|
|
/* for the moment we limit ourselves to 16bit IO until some
|
|
* better IO routines can be written and tested
|
|
*/
|
|
|
|
static struct dm9000_plat_data bast_dm9k_platdata = {
|
|
.flags = DM9000_PLATF_16BITONLY,
|
|
};
|
|
|
|
static struct platform_device bast_device_dm9k = {
|
|
.name = "dm9000",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(bast_dm9k_resource),
|
|
.resource = bast_dm9k_resource,
|
|
.dev = {
|
|
.platform_data = &bast_dm9k_platdata,
|
|
}
|
|
};
|
|
|
|
/* serial devices */
|
|
|
|
#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)
|
|
#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
|
|
#define SERIAL_CLK (1843200)
|
|
|
|
static struct plat_serial8250_port bast_sio_data[] = {
|
|
[0] = {
|
|
.mapbase = SERIAL_BASE + 0x2f8,
|
|
.irq = IRQ_PCSERIAL1,
|
|
.flags = SERIAL_FLAGS,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 0,
|
|
.uartclk = SERIAL_CLK,
|
|
},
|
|
[1] = {
|
|
.mapbase = SERIAL_BASE + 0x3f8,
|
|
.irq = IRQ_PCSERIAL2,
|
|
.flags = SERIAL_FLAGS,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 0,
|
|
.uartclk = SERIAL_CLK,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static struct platform_device bast_sio = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM,
|
|
.dev = {
|
|
.platform_data = &bast_sio_data,
|
|
},
|
|
};
|
|
|
|
/* we have devices on the bus which cannot work much over the
|
|
* standard 100KHz i2c bus frequency
|
|
*/
|
|
|
|
static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
|
|
.flags = 0,
|
|
.slave_addr = 0x10,
|
|
.bus_freq = 100*1000,
|
|
.max_freq = 130*1000,
|
|
};
|
|
|
|
/* Asix AX88796 10/100 ethernet controller */
|
|
|
|
static struct ax_plat_data bast_asix_platdata = {
|
|
.flags = AXFLG_MAC_FROMDEV,
|
|
.wordlength = 2,
|
|
.dcr_val = 0x48,
|
|
.rcr_val = 0x40,
|
|
};
|
|
|
|
static struct resource bast_asix_resource[] = {
|
|
[0] = {
|
|
.start = S3C2410_CS5 + BAST_PA_ASIXNET,
|
|
.end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20) - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
|
|
.end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = IRQ_ASIX,
|
|
.end = IRQ_ASIX,
|
|
.flags = IORESOURCE_IRQ
|
|
}
|
|
};
|
|
|
|
static struct platform_device bast_device_asix = {
|
|
.name = "ax88796",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(bast_asix_resource),
|
|
.resource = bast_asix_resource,
|
|
.dev = {
|
|
.platform_data = &bast_asix_platdata
|
|
}
|
|
};
|
|
|
|
/* Asix AX88796 10/100 ethernet controller parallel port */
|
|
|
|
static struct resource bast_asixpp_resource[] = {
|
|
[0] = {
|
|
.start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20),
|
|
.end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1b * 0x20) - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device bast_device_axpp = {
|
|
.name = "ax88796-pp",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(bast_asixpp_resource),
|
|
.resource = bast_asixpp_resource,
|
|
};
|
|
|
|
/* LCD/VGA controller */
|
|
|
|
static struct s3c2410fb_display __initdata bast_lcd_info[] = {
|
|
{
|
|
.type = S3C2410_LCDCON1_TFT,
|
|
.width = 640,
|
|
.height = 480,
|
|
|
|
.pixclock = 33333,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 4,
|
|
.left_margin = 40,
|
|
.right_margin = 20,
|
|
.hsync_len = 88,
|
|
.upper_margin = 30,
|
|
.lower_margin = 32,
|
|
.vsync_len = 3,
|
|
|
|
.lcdcon5 = 0x00014b02,
|
|
},
|
|
{
|
|
.type = S3C2410_LCDCON1_TFT,
|
|
.width = 640,
|
|
.height = 480,
|
|
|
|
.pixclock = 33333,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 8,
|
|
.left_margin = 40,
|
|
.right_margin = 20,
|
|
.hsync_len = 88,
|
|
.upper_margin = 30,
|
|
.lower_margin = 32,
|
|
.vsync_len = 3,
|
|
|
|
.lcdcon5 = 0x00014b02,
|
|
},
|
|
{
|
|
.type = S3C2410_LCDCON1_TFT,
|
|
.width = 640,
|
|
.height = 480,
|
|
|
|
.pixclock = 33333,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 16,
|
|
.left_margin = 40,
|
|
.right_margin = 20,
|
|
.hsync_len = 88,
|
|
.upper_margin = 30,
|
|
.lower_margin = 32,
|
|
.vsync_len = 3,
|
|
|
|
.lcdcon5 = 0x00014b02,
|
|
},
|
|
};
|
|
|
|
/* LCD/VGA controller */
|
|
|
|
static struct s3c2410fb_mach_info __initdata bast_fb_info = {
|
|
|
|
.displays = bast_lcd_info,
|
|
.num_displays = ARRAY_SIZE(bast_lcd_info),
|
|
.default_display = 1,
|
|
};
|
|
|
|
/* I2C devices fitted. */
|
|
|
|
static struct i2c_board_info bast_i2c_devs[] __initdata = {
|
|
{
|
|
I2C_BOARD_INFO("tlv320aic23", 0x1a),
|
|
}, {
|
|
I2C_BOARD_INFO("simtec-pmu", 0x6b),
|
|
}, {
|
|
I2C_BOARD_INFO("ch7013", 0x75),
|
|
},
|
|
};
|
|
|
|
/* Standard BAST devices */
|
|
|
|
static struct platform_device *bast_devices[] __initdata = {
|
|
&s3c_device_usb,
|
|
&s3c_device_lcd,
|
|
&s3c_device_wdt,
|
|
&s3c_device_i2c0,
|
|
&s3c_device_rtc,
|
|
&s3c_device_nand,
|
|
&bast_device_dm9k,
|
|
&bast_device_asix,
|
|
&bast_device_axpp,
|
|
&bast_sio,
|
|
};
|
|
|
|
static struct clk *bast_clocks[] __initdata = {
|
|
&s3c24xx_dclk0,
|
|
&s3c24xx_dclk1,
|
|
&s3c24xx_clkout0,
|
|
&s3c24xx_clkout1,
|
|
&s3c24xx_uclk,
|
|
};
|
|
|
|
static void __init bast_map_io(void)
|
|
{
|
|
/* initialise the clocks */
|
|
|
|
s3c24xx_dclk0.parent = &clk_upll;
|
|
s3c24xx_dclk0.rate = 12*1000*1000;
|
|
|
|
s3c24xx_dclk1.parent = &clk_upll;
|
|
s3c24xx_dclk1.rate = 24*1000*1000;
|
|
|
|
s3c24xx_clkout0.parent = &s3c24xx_dclk0;
|
|
s3c24xx_clkout1.parent = &s3c24xx_dclk1;
|
|
|
|
s3c24xx_uclk.parent = &s3c24xx_clkout1;
|
|
|
|
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
|
|
|
|
s3c_device_nand.dev.platform_data = &bast_nand_info;
|
|
|
|
s3c_i2c0_set_platdata(&bast_i2c_info);
|
|
|
|
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
|
|
s3c24xx_init_clocks(0);
|
|
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
|
|
|
|
usb_simtec_init();
|
|
}
|
|
|
|
static void __init bast_init(void)
|
|
{
|
|
sysdev_class_register(&bast_pm_sysclass);
|
|
sysdev_register(&bast_pm_sysdev);
|
|
|
|
s3c24xx_fb_set_platdata(&bast_fb_info);
|
|
platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
|
|
|
|
i2c_register_board_info(0, bast_i2c_devs,
|
|
ARRAY_SIZE(bast_i2c_devs));
|
|
|
|
nor_simtec_init();
|
|
}
|
|
|
|
MACHINE_START(BAST, "Simtec-BAST")
|
|
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
|
|
.phys_io = S3C2410_PA_UART,
|
|
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
|
|
.boot_params = S3C2410_SDRAM_PA + 0x100,
|
|
.map_io = bast_map_io,
|
|
.init_irq = s3c24xx_init_irq,
|
|
.init_machine = bast_init,
|
|
.timer = &s3c24xx_timer,
|
|
MACHINE_END
|