linux/arch/x86/lib/usercopy_64.c
Linus Torvalds 96d4f267e4 Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 18:57:57 -08:00

230 lines
5.5 KiB
C

/*
* User address space access functions.
*
* Copyright 1997 Andi Kleen <ak@muc.de>
* Copyright 1997 Linus Torvalds
* Copyright 2002 Andi Kleen <ak@suse.de>
*/
#include <linux/export.h>
#include <linux/uaccess.h>
#include <linux/highmem.h>
/*
* Zero Userspace
*/
unsigned long __clear_user(void __user *addr, unsigned long size)
{
long __d0;
might_fault();
/* no memory constraint because it doesn't change any memory gcc knows
about */
stac();
asm volatile(
" testq %[size8],%[size8]\n"
" jz 4f\n"
"0: movq $0,(%[dst])\n"
" addq $8,%[dst]\n"
" decl %%ecx ; jnz 0b\n"
"4: movq %[size1],%%rcx\n"
" testl %%ecx,%%ecx\n"
" jz 2f\n"
"1: movb $0,(%[dst])\n"
" incq %[dst]\n"
" decl %%ecx ; jnz 1b\n"
"2:\n"
".section .fixup,\"ax\"\n"
"3: lea 0(%[size1],%[size8],8),%[size8]\n"
" jmp 2b\n"
".previous\n"
_ASM_EXTABLE_UA(0b, 3b)
_ASM_EXTABLE_UA(1b, 2b)
: [size8] "=&c"(size), [dst] "=&D" (__d0)
: [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr));
clac();
return size;
}
EXPORT_SYMBOL(__clear_user);
unsigned long clear_user(void __user *to, unsigned long n)
{
if (access_ok(to, n))
return __clear_user(to, n);
return n;
}
EXPORT_SYMBOL(clear_user);
/*
* Try to copy last bytes and clear the rest if needed.
* Since protection fault in copy_from/to_user is not a normal situation,
* it is not necessary to optimize tail handling.
*/
__visible unsigned long
copy_user_handle_tail(char *to, char *from, unsigned len)
{
for (; len; --len, to++) {
char c;
if (__get_user_nocheck(c, from++, sizeof(char)))
break;
if (__put_user_nocheck(c, to, sizeof(char)))
break;
}
clac();
return len;
}
/*
* Similar to copy_user_handle_tail, probe for the write fault point,
* but reuse __memcpy_mcsafe in case a new read error is encountered.
* clac() is handled in _copy_to_iter_mcsafe().
*/
__visible unsigned long
mcsafe_handle_tail(char *to, char *from, unsigned len)
{
for (; len; --len, to++, from++) {
/*
* Call the assembly routine back directly since
* memcpy_mcsafe() may silently fallback to memcpy.
*/
unsigned long rem = __memcpy_mcsafe(to, from, 1);
if (rem)
break;
}
return len;
}
#ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE
/**
* clean_cache_range - write back a cache range with CLWB
* @vaddr: virtual start address
* @size: number of bytes to write back
*
* Write back a cache range using the CLWB (cache line write back)
* instruction. Note that @size is internally rounded up to be cache
* line size aligned.
*/
static void clean_cache_range(void *addr, size_t size)
{
u16 x86_clflush_size = boot_cpu_data.x86_clflush_size;
unsigned long clflush_mask = x86_clflush_size - 1;
void *vend = addr + size;
void *p;
for (p = (void *)((unsigned long)addr & ~clflush_mask);
p < vend; p += x86_clflush_size)
clwb(p);
}
void arch_wb_cache_pmem(void *addr, size_t size)
{
clean_cache_range(addr, size);
}
EXPORT_SYMBOL_GPL(arch_wb_cache_pmem);
long __copy_user_flushcache(void *dst, const void __user *src, unsigned size)
{
unsigned long flushed, dest = (unsigned long) dst;
long rc = __copy_user_nocache(dst, src, size, 0);
/*
* __copy_user_nocache() uses non-temporal stores for the bulk
* of the transfer, but we need to manually flush if the
* transfer is unaligned. A cached memory copy is used when
* destination or size is not naturally aligned. That is:
* - Require 8-byte alignment when size is 8 bytes or larger.
* - Require 4-byte alignment when size is 4 bytes.
*/
if (size < 8) {
if (!IS_ALIGNED(dest, 4) || size != 4)
clean_cache_range(dst, 1);
} else {
if (!IS_ALIGNED(dest, 8)) {
dest = ALIGN(dest, boot_cpu_data.x86_clflush_size);
clean_cache_range(dst, 1);
}
flushed = dest - (unsigned long) dst;
if (size > flushed && !IS_ALIGNED(size - flushed, 8))
clean_cache_range(dst + size - 1, 1);
}
return rc;
}
void __memcpy_flushcache(void *_dst, const void *_src, size_t size)
{
unsigned long dest = (unsigned long) _dst;
unsigned long source = (unsigned long) _src;
/* cache copy and flush to align dest */
if (!IS_ALIGNED(dest, 8)) {
unsigned len = min_t(unsigned, size, ALIGN(dest, 8) - dest);
memcpy((void *) dest, (void *) source, len);
clean_cache_range((void *) dest, len);
dest += len;
source += len;
size -= len;
if (!size)
return;
}
/* 4x8 movnti loop */
while (size >= 32) {
asm("movq (%0), %%r8\n"
"movq 8(%0), %%r9\n"
"movq 16(%0), %%r10\n"
"movq 24(%0), %%r11\n"
"movnti %%r8, (%1)\n"
"movnti %%r9, 8(%1)\n"
"movnti %%r10, 16(%1)\n"
"movnti %%r11, 24(%1)\n"
:: "r" (source), "r" (dest)
: "memory", "r8", "r9", "r10", "r11");
dest += 32;
source += 32;
size -= 32;
}
/* 1x8 movnti loop */
while (size >= 8) {
asm("movq (%0), %%r8\n"
"movnti %%r8, (%1)\n"
:: "r" (source), "r" (dest)
: "memory", "r8");
dest += 8;
source += 8;
size -= 8;
}
/* 1x4 movnti loop */
while (size >= 4) {
asm("movl (%0), %%r8d\n"
"movnti %%r8d, (%1)\n"
:: "r" (source), "r" (dest)
: "memory", "r8");
dest += 4;
source += 4;
size -= 4;
}
/* cache copy for remaining bytes */
if (size) {
memcpy((void *) dest, (void *) source, size);
clean_cache_range((void *) dest, size);
}
}
EXPORT_SYMBOL_GPL(__memcpy_flushcache);
void memcpy_page_flushcache(char *to, struct page *page, size_t offset,
size_t len)
{
char *from = kmap_atomic(page);
memcpy_flushcache(to, from + offset, len);
kunmap_atomic(from);
}
#endif