linux/arch/arm/boot/dts/href.dtsi
Linus Walleij d594224ae6 ARM: ux500: drop any 0x prefix from I2C DT devices
This removes the "0x" prefix in front of the I2C DT device
address designation for each I2C DT node in the ux500
devicetree files.

Reported-by: Bryan Wu <cooloney@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04 11:50:32 +02:00

302 lines
6.0 KiB
Plaintext

/*
* Copyright 2012 ST-Ericsson AB
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include "dbx5x0.dtsi"
/ {
memory {
reg = <0x00000000 0x20000000>;
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
linux,code = <11>;
label = "SFH7741 Proximity Sensor";
};
};
soc {
uart@80120000 {
status = "okay";
};
uart@80121000 {
status = "okay";
};
uart@80007000 {
status = "okay";
};
i2c@80004000 {
tc3589x@42 {
compatible = "tc3589x";
reg = <0x42>;
interrupt-parent = <&gpio6>;
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
tc3589x_gpio: tc3589x_gpio {
compatible = "tc3589x-gpio";
interrupts = <0 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
};
};
i2c@80128000 {
lp5521@33 {
compatible = "national,lp5521";
reg = <0x33>;
label = "lp5521_pri";
clock-mode = /bits/ 8 <2>;
chan0 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
chan1 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
chan2 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
};
lp5521@34 {
compatible = "national,lp5521";
reg = <0x34>;
label = "lp5521_sec";
clock-mode = /bits/ 8 <2>;
chan0 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
chan1 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
chan2 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
};
bh1780@29 {
compatible = "rohm,bh1780gli";
reg = <0x33>;
};
};
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
mmc-cap-sd-highspeed;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
cd-gpios = <&tc3589x_gpio 3 0x4>;
status = "okay";
};
// WLAN SDIO channel
sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
status = "okay";
};
// PoP:ed eMMC
sdi2_per3@80005000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
status = "okay";
};
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
status = "okay";
};
sound {
compatible = "stericsson,snd-soc-mop500";
stericsson,cpu-dai = <&msp1 &msp3>;
stericsson,audio-codec = <&codec>;
};
msp1: msp@80124000 {
status = "okay";
};
msp3: msp@80125000 {
status = "okay";
};
prcmu@80157000 {
db8500-prcmu-regulators {
db8500_vape_reg: db8500_vape {
regulator-name = "db8500-vape";
};
db8500_varm_reg: db8500_varm {
regulator-name = "db8500-varm";
};
db8500_vmodem_reg: db8500_vmodem {
regulator-name = "db8500-vmodem";
};
db8500_vpll_reg: db8500_vpll {
regulator-name = "db8500-vpll";
};
db8500_vsmps1_reg: db8500_vsmps1 {
regulator-name = "db8500-vsmps1";
};
db8500_vsmps2_reg: db8500_vsmps2 {
regulator-name = "db8500-vsmps2";
};
db8500_vsmps3_reg: db8500_vsmps3 {
regulator-name = "db8500-vsmps3";
};
db8500_vrf1_reg: db8500_vrf1 {
regulator-name = "db8500-vrf1";
};
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
regulator-name = "db8500-sva-mmdsp";
};
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
regulator-name = "db8500-sva-mmdsp-ret";
};
db8500_sva_pipe_reg: db8500_sva_pipe {
regulator-name = "db8500_sva_pipe";
};
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
regulator-name = "db8500_sia_mmdsp";
};
db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
regulator-name = "db8500-sia-mmdsp-ret";
};
db8500_sia_pipe_reg: db8500_sia_pipe {
regulator-name = "db8500-sia-pipe";
};
db8500_sga_reg: db8500_sga {
regulator-name = "db8500-sga";
};
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
regulator-name = "db8500-b2r2-mcde";
};
db8500_esram12_reg: db8500_esram12 {
regulator-name = "db8500-esram12";
};
db8500_esram12_ret_reg: db8500_esram12_ret {
regulator-name = "db8500-esram12-ret";
};
db8500_esram34_reg: db8500_esram34 {
regulator-name = "db8500-esram34";
};
db8500_esram34_ret_reg: db8500_esram34_ret {
regulator-name = "db8500-esram34-ret";
};
};
ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
};
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
regulator-name = "V-eMMC1";
};
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
regulator-name = "V-MMC-SD";
};
ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-name = "V-INTCORE";
};
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
regulator-name = "V-TVOUT";
};
ab8500_ldo_usb_reg: ab8500_ldo_usb {
regulator-name = "dummy";
};
ab8500_ldo_audio_reg: ab8500_ldo_audio {
regulator-name = "V-AUD";
};
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-name = "V-AMIC1";
};
ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
regulator-name = "V-AMIC2";
};
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
regulator-name = "V-DMIC";
};
ab8500_ldo_ana_reg: ab8500_ldo_ana {
regulator-name = "V-CSI/DSI";
};
};
};
};
};
};