linux/arch/x86/boot/Makefile
Ingo Molnar 965c7ecaf2 x86: remove the Voyager 32-bit subarch
Impact: remove unused/broken code

The Voyager subarch last built successfully on the v2.6.26 kernel
and has been stale since then and does not build on the v2.6.27,
v2.6.28 and v2.6.29-rc5 kernels.

No actual users beyond the maintainer reported this breakage.
Patches were sent and most of the fixes were accepted but the
discussion around how to do a few remaining issues cleanly
fizzled out with no resolution and the code remained broken.

In the v2.6.30 x86 tree development cycle 32-bit subarch support
has been reworked and removed - and the Voyager code, beyond the
build problems already known, needs serious and significant
changes and probably a rewrite to support it.

CONFIG_X86_VOYAGER has been marked BROKEN then. The maintainer has
been notified but no patches have been sent so far to fix it.

While all other subarchs have been converted to the new scheme,
voyager is still broken. We'd prefer to receive patches which
clean up the current situation in a constructive way, but even in
case of removal there is no obstacle to add that support back
after the issues have been sorted out in a mutually acceptable
fashion.

So remove this inactive code for now.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-23 00:54:01 +01:00

193 lines
6.6 KiB
Makefile

#
# arch/x86/boot/Makefile
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
#
# ROOT_DEV specifies the default root-device when making the image.
# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
# the default of FLOPPY is used by 'build'.
ROOT_DEV := CURRENT
# If you want to preset the SVGA mode, uncomment the next line and
# set SVGA_MODE to whatever number you want.
# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
# The number is the same as you would ordinarily press at bootup.
SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
# If you want the RAM disk device, define this to be the size in blocks.
#RAMDISK := -DRAMDISK=512
targets := vmlinux.bin setup.bin setup.elf zImage bzImage
subdir- := compressed
setup-y += a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
setup-y += header.o main.o mca.o memory.o pm.o pmjump.o
setup-y += printf.o string.o tty.o video.o video-mode.o version.o
setup-$(CONFIG_X86_APM_BOOT) += apm.o
# The link order of the video-*.o modules can matter. In particular,
# video-vga.o *must* be listed first, followed by video-vesa.o.
# Hardware-specific drivers should follow in the order they should be
# probed, and video-bios.o should typically be last.
setup-y += video-vga.o
setup-y += video-vesa.o
setup-y += video-bios.o
targets += $(setup-y)
hostprogs-y := mkcpustr tools/build
HOST_EXTRACFLAGS += $(LINUXINCLUDE)
$(obj)/cpu.o: $(obj)/cpustr.h
quiet_cmd_cpustr = CPUSTR $@
cmd_cpustr = $(obj)/mkcpustr > $@
targets += cpustr.h
$(obj)/cpustr.h: $(obj)/mkcpustr FORCE
$(call if_changed,cpustr)
# ---------------------------------------------------------------------------
# How to compile the 16-bit code. Note we always compile for -march=i386,
# that way we can complain to the user if the CPU is insufficient.
KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
-Wall -Wstrict-prototypes \
-march=i386 -mregparm=3 \
-include $(srctree)/$(src)/code16gcc.h \
-fno-strict-aliasing -fomit-frame-pointer \
$(call cc-option, -ffreestanding) \
$(call cc-option, -fno-toplevel-reorder,\
$(call cc-option, -fno-unit-at-a-time)) \
$(call cc-option, -fno-stack-protector) \
$(call cc-option, -mpreferred-stack-boundary=2)
KBUILD_CFLAGS += $(call cc-option,-m32)
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
$(obj)/zImage: asflags-y := $(SVGA_MODE) $(RAMDISK)
$(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__
$(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
$(obj)/bzImage: BUILDFLAGS := -b
quiet_cmd_image = BUILD $@
cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \
$(obj)/vmlinux.bin $(ROOT_DEV) > $@
$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \
$(obj)/vmlinux.bin $(obj)/tools/build FORCE
$(call if_changed,image)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy)
SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
sed-offsets := -e 's/^00*/0/' \
-e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p'
quiet_cmd_offsets = OFFSETS $@
cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
$(call if_changed,offsets)
targets += offsets.h
AFLAGS_header.o += -I$(obj)
$(obj)/header.o: $(obj)/offsets.h
LDFLAGS_setup.elf := -T
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
$(call if_changed,ld)
OBJCOPYFLAGS_setup.bin := -O binary
$(obj)/setup.bin: $(obj)/setup.elf FORCE
$(call if_changed,objcopy)
$(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
FDARGS =
# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
FDINITRD =
image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
$(obj)/mtools.conf: $(src)/mtools.conf.in
sed -e 's|@OBJ@|$(obj)|g' < $< > $@
# This requires write access to /dev/fd0
zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
syslinux /dev/fd0 ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
# These require being root or having syslinux 2.02 or higher installed
fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
syslinux $(obj)/fdimage ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
syslinux $(obj)/fdimage ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync
isoimage: $(BOOTIMAGE)
-rm -rf $(obj)/isoimage
mkdir $(obj)/isoimage
for i in lib lib64 share end ; do \
if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
break ; \
fi ; \
if [ $$i = end ] ; then exit 1 ; fi ; \
done
cp $(BOOTIMAGE) $(obj)/isoimage/linux
echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
fi
mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
-no-emul-boot -boot-load-size 4 -boot-info-table \
$(obj)/isoimage
isohybrid $(obj)/image.iso 2>/dev/null || true
rm -rf $(obj)/isoimage
zlilo: $(BOOTIMAGE)
if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
cp System.map $(INSTALL_PATH)/
if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
install:
sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"