linux/sound/soc/qcom/sm8250.c
Srinivas Kandagatla 961e7ba550
ASoC: qcom: sm8250: add support for TX and RX Macro dais
On SM8250 MTP boards WCD938x codec is connected via TX and RX Macros,
so add support for this dais in the soundcard driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211006172745.22103-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-18 21:11:49 +01:00

248 lines
6.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2020, Linaro Limited
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/pcm.h>
#include <linux/soundwire/sdw.h>
#include "qdsp6/q6afe.h"
#include "common.h"
#define DRIVER_NAME "sm8250"
#define MI2S_BCLK_RATE 1536000
struct sm8250_snd_data {
bool stream_prepared[AFE_PORT_MAX];
struct snd_soc_card *card;
struct sdw_stream_runtime *sruntime[AFE_PORT_MAX];
};
static int sm8250_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_hw_params *params)
{
struct snd_interval *rate = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_RATE);
struct snd_interval *channels = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
rate->min = rate->max = 48000;
channels->min = channels->max = 2;
return 0;
}
static int sm8250_snd_startup(struct snd_pcm_substream *substream)
{
unsigned int fmt = SND_SOC_DAIFMT_CBS_CFS;
unsigned int codec_dai_fmt = SND_SOC_DAIFMT_CBS_CFS;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
switch (cpu_dai->id) {
case TERTIARY_MI2S_RX:
codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
snd_soc_dai_set_sysclk(cpu_dai,
Q6AFE_LPASS_CLK_ID_TER_MI2S_IBIT,
MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
snd_soc_dai_set_fmt(cpu_dai, fmt);
snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
break;
default:
break;
}
return 0;
}
static int sm8250_snd_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai;
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
struct sm8250_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
struct sdw_stream_runtime *sruntime;
int i;
switch (cpu_dai->id) {
case WSA_CODEC_DMA_RX_0:
case RX_CODEC_DMA_RX_0:
case RX_CODEC_DMA_RX_1:
case TX_CODEC_DMA_TX_0:
case TX_CODEC_DMA_TX_1:
case TX_CODEC_DMA_TX_2:
case TX_CODEC_DMA_TX_3:
for_each_rtd_codec_dais(rtd, i, codec_dai) {
sruntime = snd_soc_dai_get_sdw_stream(codec_dai,
substream->stream);
if (sruntime != ERR_PTR(-ENOTSUPP))
pdata->sruntime[cpu_dai->id] = sruntime;
}
break;
}
return 0;
}
static int sm8250_snd_wsa_dma_prepare(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
struct sm8250_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
int ret;
if (!sruntime)
return 0;
if (data->stream_prepared[cpu_dai->id]) {
sdw_disable_stream(sruntime);
sdw_deprepare_stream(sruntime);
data->stream_prepared[cpu_dai->id] = false;
}
ret = sdw_prepare_stream(sruntime);
if (ret)
return ret;
/**
* NOTE: there is a strict hw requirement about the ordering of port
* enables and actual WSA881x PA enable. PA enable should only happen
* after soundwire ports are enabled if not DC on the line is
* accumulated resulting in Click/Pop Noise
* PA enable/mute are handled as part of codec DAPM and digital mute.
*/
ret = sdw_enable_stream(sruntime);
if (ret) {
sdw_deprepare_stream(sruntime);
return ret;
}
data->stream_prepared[cpu_dai->id] = true;
return ret;
}
static int sm8250_snd_prepare(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
switch (cpu_dai->id) {
case WSA_CODEC_DMA_RX_0:
case WSA_CODEC_DMA_RX_1:
case RX_CODEC_DMA_RX_0:
case RX_CODEC_DMA_RX_1:
case TX_CODEC_DMA_TX_0:
case TX_CODEC_DMA_TX_1:
case TX_CODEC_DMA_TX_2:
case TX_CODEC_DMA_TX_3:
return sm8250_snd_wsa_dma_prepare(substream);
default:
break;
}
return 0;
}
static int sm8250_snd_hw_free(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct sm8250_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
switch (cpu_dai->id) {
case WSA_CODEC_DMA_RX_0:
case WSA_CODEC_DMA_RX_1:
case RX_CODEC_DMA_RX_0:
case RX_CODEC_DMA_RX_1:
case TX_CODEC_DMA_TX_0:
case TX_CODEC_DMA_TX_1:
case TX_CODEC_DMA_TX_2:
case TX_CODEC_DMA_TX_3:
if (sruntime && data->stream_prepared[cpu_dai->id]) {
sdw_disable_stream(sruntime);
sdw_deprepare_stream(sruntime);
data->stream_prepared[cpu_dai->id] = false;
}
break;
default:
break;
}
return 0;
}
static const struct snd_soc_ops sm8250_be_ops = {
.startup = sm8250_snd_startup,
.hw_params = sm8250_snd_hw_params,
.hw_free = sm8250_snd_hw_free,
.prepare = sm8250_snd_prepare,
};
static void sm8250_add_be_ops(struct snd_soc_card *card)
{
struct snd_soc_dai_link *link;
int i;
for_each_card_prelinks(card, i, link) {
if (link->no_pcm == 1) {
link->be_hw_params_fixup = sm8250_be_hw_params_fixup;
link->ops = &sm8250_be_ops;
}
}
}
static int sm8250_platform_probe(struct platform_device *pdev)
{
struct snd_soc_card *card;
struct sm8250_snd_data *data;
struct device *dev = &pdev->dev;
int ret;
card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL);
if (!card)
return -ENOMEM;
/* Allocate the private data */
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
card->dev = dev;
dev_set_drvdata(dev, card);
snd_soc_card_set_drvdata(card, data);
ret = qcom_snd_parse_of(card);
if (ret)
return ret;
card->driver_name = DRIVER_NAME;
sm8250_add_be_ops(card);
return devm_snd_soc_register_card(dev, card);
}
static const struct of_device_id snd_sm8250_dt_match[] = {
{.compatible = "qcom,sm8250-sndcard"},
{.compatible = "qcom,qrb5165-rb5-sndcard"},
{}
};
MODULE_DEVICE_TABLE(of, snd_sm8250_dt_match);
static struct platform_driver snd_sm8250_driver = {
.probe = sm8250_platform_probe,
.driver = {
.name = "snd-sm8250",
.of_match_table = snd_sm8250_dt_match,
},
};
module_platform_driver(snd_sm8250_driver);
MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org");
MODULE_DESCRIPTION("SM8250 ASoC Machine Driver");
MODULE_LICENSE("GPL v2");