mirror of
https://github.com/torvalds/linux.git
synced 2024-11-17 01:22:07 +00:00
d3be83244c
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
225 lines
5.2 KiB
C
225 lines
5.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* IIO ADC driver for NXP LPC18xx ADC
|
|
*
|
|
* Copyright (C) 2016 Joachim Eastwood <manabian@gmail.com>
|
|
*
|
|
* UNSUPPORTED hardware features:
|
|
* - Hardware triggers
|
|
* - Burst mode
|
|
* - Interrupts
|
|
* - DMA
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
/* LPC18XX ADC registers and bits */
|
|
#define LPC18XX_ADC_CR 0x000
|
|
#define LPC18XX_ADC_CR_CLKDIV_SHIFT 8
|
|
#define LPC18XX_ADC_CR_PDN BIT(21)
|
|
#define LPC18XX_ADC_CR_START_NOW (0x1 << 24)
|
|
#define LPC18XX_ADC_GDR 0x004
|
|
|
|
/* Data register bits */
|
|
#define LPC18XX_ADC_SAMPLE_SHIFT 6
|
|
#define LPC18XX_ADC_SAMPLE_MASK 0x3ff
|
|
#define LPC18XX_ADC_CONV_DONE BIT(31)
|
|
|
|
/* Clock should be 4.5 MHz or less */
|
|
#define LPC18XX_ADC_CLK_TARGET 4500000
|
|
|
|
struct lpc18xx_adc {
|
|
struct regulator *vref;
|
|
void __iomem *base;
|
|
struct device *dev;
|
|
struct mutex lock;
|
|
struct clk *clk;
|
|
u32 cr_reg;
|
|
};
|
|
|
|
#define LPC18XX_ADC_CHAN(_idx) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = _idx, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
}
|
|
|
|
static const struct iio_chan_spec lpc18xx_adc_iio_channels[] = {
|
|
LPC18XX_ADC_CHAN(0),
|
|
LPC18XX_ADC_CHAN(1),
|
|
LPC18XX_ADC_CHAN(2),
|
|
LPC18XX_ADC_CHAN(3),
|
|
LPC18XX_ADC_CHAN(4),
|
|
LPC18XX_ADC_CHAN(5),
|
|
LPC18XX_ADC_CHAN(6),
|
|
LPC18XX_ADC_CHAN(7),
|
|
};
|
|
|
|
static int lpc18xx_adc_read_chan(struct lpc18xx_adc *adc, unsigned int ch)
|
|
{
|
|
int ret;
|
|
u32 reg;
|
|
|
|
reg = adc->cr_reg | BIT(ch) | LPC18XX_ADC_CR_START_NOW;
|
|
writel(reg, adc->base + LPC18XX_ADC_CR);
|
|
|
|
ret = readl_poll_timeout(adc->base + LPC18XX_ADC_GDR, reg,
|
|
reg & LPC18XX_ADC_CONV_DONE, 3, 9);
|
|
if (ret) {
|
|
dev_warn(adc->dev, "adc read timed out\n");
|
|
return ret;
|
|
}
|
|
|
|
return (reg >> LPC18XX_ADC_SAMPLE_SHIFT) & LPC18XX_ADC_SAMPLE_MASK;
|
|
}
|
|
|
|
static int lpc18xx_adc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct lpc18xx_adc *adc = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&adc->lock);
|
|
*val = lpc18xx_adc_read_chan(adc, chan->channel);
|
|
mutex_unlock(&adc->lock);
|
|
if (*val < 0)
|
|
return *val;
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = regulator_get_voltage(adc->vref) / 1000;
|
|
*val2 = 10;
|
|
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info lpc18xx_adc_info = {
|
|
.read_raw = lpc18xx_adc_read_raw,
|
|
};
|
|
|
|
static int lpc18xx_adc_probe(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct lpc18xx_adc *adc;
|
|
unsigned int clkdiv;
|
|
unsigned long rate;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
adc = iio_priv(indio_dev);
|
|
adc->dev = &pdev->dev;
|
|
mutex_init(&adc->lock);
|
|
|
|
adc->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(adc->base))
|
|
return PTR_ERR(adc->base);
|
|
|
|
adc->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(adc->clk)) {
|
|
dev_err(&pdev->dev, "error getting clock\n");
|
|
return PTR_ERR(adc->clk);
|
|
}
|
|
|
|
rate = clk_get_rate(adc->clk);
|
|
clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET);
|
|
|
|
adc->vref = devm_regulator_get(&pdev->dev, "vref");
|
|
if (IS_ERR(adc->vref)) {
|
|
dev_err(&pdev->dev, "error getting regulator\n");
|
|
return PTR_ERR(adc->vref);
|
|
}
|
|
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->info = &lpc18xx_adc_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = lpc18xx_adc_iio_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(lpc18xx_adc_iio_channels);
|
|
|
|
ret = regulator_enable(adc->vref);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to enable regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(adc->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to enable clock\n");
|
|
goto dis_reg;
|
|
}
|
|
|
|
adc->cr_reg = (clkdiv << LPC18XX_ADC_CR_CLKDIV_SHIFT) |
|
|
LPC18XX_ADC_CR_PDN;
|
|
writel(adc->cr_reg, adc->base + LPC18XX_ADC_CR);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to register device\n");
|
|
goto dis_clk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
dis_clk:
|
|
writel(0, adc->base + LPC18XX_ADC_CR);
|
|
clk_disable_unprepare(adc->clk);
|
|
dis_reg:
|
|
regulator_disable(adc->vref);
|
|
return ret;
|
|
}
|
|
|
|
static int lpc18xx_adc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct lpc18xx_adc *adc = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
writel(0, adc->base + LPC18XX_ADC_CR);
|
|
clk_disable_unprepare(adc->clk);
|
|
regulator_disable(adc->vref);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id lpc18xx_adc_match[] = {
|
|
{ .compatible = "nxp,lpc1850-adc" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lpc18xx_adc_match);
|
|
|
|
static struct platform_driver lpc18xx_adc_driver = {
|
|
.probe = lpc18xx_adc_probe,
|
|
.remove = lpc18xx_adc_remove,
|
|
.driver = {
|
|
.name = "lpc18xx-adc",
|
|
.of_match_table = lpc18xx_adc_match,
|
|
},
|
|
};
|
|
module_platform_driver(lpc18xx_adc_driver);
|
|
|
|
MODULE_DESCRIPTION("LPC18xx ADC driver");
|
|
MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|