mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 10:01:43 +00:00
9e7b6d3eda
Add support for the ARM, AHB, APB and DDR clocks found on the WM8505, WM8650, WM8750 and WM8850 SoCs. These clocks are gateable, but the enable part of the clock definition is left out as there are no users for these clocks, and we don't want them being disabled at boot, but it does provide users the ability to check the current rate of these clocks. Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
291 lines
5.7 KiB
Plaintext
291 lines
5.7 KiB
Plaintext
/*
|
|
* wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC
|
|
*
|
|
* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
|
|
*
|
|
* Licensed under GPLv2 or later
|
|
*/
|
|
|
|
/include/ "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "wm,wm8505";
|
|
|
|
cpus {
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
|
|
cpu {
|
|
device_type = "cpu";
|
|
compatible = "arm,arm926ej-s";
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
serial4 = &uart4;
|
|
serial5 = &uart5;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
ranges;
|
|
interrupt-parent = <&intc0>;
|
|
|
|
intc0: interrupt-controller@d8140000 {
|
|
compatible = "via,vt8500-intc";
|
|
interrupt-controller;
|
|
reg = <0xd8140000 0x10000>;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
/* Secondary IC cascaded to intc0 */
|
|
intc1: interrupt-controller@d8150000 {
|
|
compatible = "via,vt8500-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0xD8150000 0x10000>;
|
|
interrupts = <56 57 58 59 60 61 62 63>;
|
|
};
|
|
|
|
pinctrl: pinctrl@d8110000 {
|
|
compatible = "wm,wm8505-pinctrl";
|
|
reg = <0xd8110000 0x10000>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
pmc@d8130000 {
|
|
compatible = "via,vt8500-pmc";
|
|
reg = <0xd8130000 0x1000>;
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ref24: ref24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
ref25: ref25M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
plla: plla {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-pll-clock";
|
|
clocks = <&ref25>;
|
|
reg = <0x200>;
|
|
};
|
|
|
|
pllb: pllb {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-pll-clock";
|
|
clocks = <&ref25>;
|
|
reg = <0x204>;
|
|
};
|
|
|
|
pllc: pllc {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-pll-clock";
|
|
clocks = <&ref25>;
|
|
reg = <0x208>;
|
|
};
|
|
|
|
plld: plld {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-pll-clock";
|
|
clocks = <&ref25>;
|
|
reg = <0x20c>;
|
|
};
|
|
|
|
clkarm: arm {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&plla>;
|
|
divisor-reg = <0x300>;
|
|
};
|
|
|
|
clkahb: ahb {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&pllb>;
|
|
divisor-reg = <0x304>;
|
|
};
|
|
|
|
clkapb: apb {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&pllb>;
|
|
divisor-reg = <0x350>;
|
|
};
|
|
|
|
clkddr: ddr {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&plld>;
|
|
divisor-reg = <0x310>;
|
|
};
|
|
|
|
clkuart0: uart0 {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&ref24>;
|
|
enable-reg = <0x250>;
|
|
enable-bit = <1>;
|
|
};
|
|
|
|
clkuart1: uart1 {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&ref24>;
|
|
enable-reg = <0x250>;
|
|
enable-bit = <2>;
|
|
};
|
|
|
|
clkuart2: uart2 {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&ref24>;
|
|
enable-reg = <0x250>;
|
|
enable-bit = <3>;
|
|
};
|
|
|
|
clkuart3: uart3 {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&ref24>;
|
|
enable-reg = <0x250>;
|
|
enable-bit = <4>;
|
|
};
|
|
|
|
clkuart4: uart4 {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&ref24>;
|
|
enable-reg = <0x250>;
|
|
enable-bit = <22>;
|
|
};
|
|
|
|
clkuart5: uart5 {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&ref24>;
|
|
enable-reg = <0x250>;
|
|
enable-bit = <23>;
|
|
};
|
|
|
|
clksdhc: sdhc {
|
|
#clock-cells = <0>;
|
|
compatible = "via,vt8500-device-clock";
|
|
clocks = <&pllb>;
|
|
divisor-reg = <0x328>;
|
|
divisor-mask = <0x3f>;
|
|
enable-reg = <0x254>;
|
|
enable-bit = <18>;
|
|
};
|
|
};
|
|
};
|
|
|
|
timer@d8130100 {
|
|
compatible = "via,vt8500-timer";
|
|
reg = <0xd8130100 0x28>;
|
|
interrupts = <36>;
|
|
};
|
|
|
|
ehci@d8007100 {
|
|
compatible = "via,vt8500-ehci";
|
|
reg = <0xd8007100 0x200>;
|
|
interrupts = <1>;
|
|
};
|
|
|
|
uhci@d8007300 {
|
|
compatible = "platform-uhci";
|
|
reg = <0xd8007300 0x200>;
|
|
interrupts = <0>;
|
|
};
|
|
|
|
fb: fb@d8050800 {
|
|
compatible = "wm,wm8505-fb";
|
|
reg = <0xd8050800 0x200>;
|
|
};
|
|
|
|
ge_rops@d8050400 {
|
|
compatible = "wm,prizm-ge-rops";
|
|
reg = <0xd8050400 0x100>;
|
|
};
|
|
|
|
uart0: serial@d8200000 {
|
|
compatible = "via,vt8500-uart";
|
|
reg = <0xd8200000 0x1040>;
|
|
interrupts = <32>;
|
|
clocks = <&clkuart0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@d82b0000 {
|
|
compatible = "via,vt8500-uart";
|
|
reg = <0xd82b0000 0x1040>;
|
|
interrupts = <33>;
|
|
clocks = <&clkuart1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@d8210000 {
|
|
compatible = "via,vt8500-uart";
|
|
reg = <0xd8210000 0x1040>;
|
|
interrupts = <47>;
|
|
clocks = <&clkuart2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@d82c0000 {
|
|
compatible = "via,vt8500-uart";
|
|
reg = <0xd82c0000 0x1040>;
|
|
interrupts = <50>;
|
|
clocks = <&clkuart3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@d8370000 {
|
|
compatible = "via,vt8500-uart";
|
|
reg = <0xd8370000 0x1040>;
|
|
interrupts = <31>;
|
|
clocks = <&clkuart4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@d8380000 {
|
|
compatible = "via,vt8500-uart";
|
|
reg = <0xd8380000 0x1040>;
|
|
interrupts = <30>;
|
|
clocks = <&clkuart5>;
|
|
status = "disabled";
|
|
};
|
|
|
|
rtc@d8100000 {
|
|
compatible = "via,vt8500-rtc";
|
|
reg = <0xd8100000 0x10000>;
|
|
interrupts = <48>;
|
|
};
|
|
|
|
sdhc@d800a000 {
|
|
compatible = "wm,wm8505-sdhc";
|
|
reg = <0xd800a000 0x1000>;
|
|
interrupts = <20 21>;
|
|
clocks = <&clksdhc>;
|
|
bus-width = <4>;
|
|
};
|
|
};
|
|
};
|