linux/arch/sparc/kernel/sun4m_irq.c
Sam Ravnborg 6baa9b20a6 sparc32: genirq support
The conversion of sparc32 to genirq is based on original work done
by David S. Miller.
Daniel Hellstrom has helped in the conversion and implemented
the shutdowm functionality.
Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20

Test status:
sun4c      - not tested
sun4m,pci  - not tested
sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20)
sun4d      - not tested
leon       - tested on various combinations of leon boards,
             including SMP variants

generic
   Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW
   Allocate 64 IRQs - which is enough even for SS2000
   Use a table of irq_bucket to maintain uses IRQs
      irq_bucket is also used to chain several irq's that
      must be called when the same intrrupt is asserted
   Use irq_link to link a interrupt source to the irq
   All plafforms must now supply their own build_device_irq method
   handler_irq rewriten to use generic irq support

floppy
   Read FLOPPY_IRQ from platform device
   Use generic request_irq to register the floppy interrupt
   Rewrote sparc_floppy_irq to use the generic irq support

pcic:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for pcic
   Use pcic_build_device_irq in pci_time_init
   allocate virtual irqs in pcic_fill_irq

sun4c:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for sun4c
   Use sun4c_build_device_irq in sun4c_init_timers

sun4m:
   Introduce irq_chip
   Introduce dedicated mask/unmask methods
   Introduce sun4m_handler_data that allow easy access to necessary
     data in the mask/unmask functions
   Add a helper method to enable profile_timer (used from smp)
   Added sun4m_build_device_irq
   Use sun4m_build_device_irq in sun4m_init_timers

   TODO:
      There is no replacement for smp_rotate that always scheduled
      next CPU as interrupt target upon an interrupt

sun4d:
   Introduce irq_chip
   Introduce dedicated mask/unmask methods
   Introduce sun4d_handler_data that allow easy access to
   necessary data in mask/unmask fuctions
   Rewrote sun4d_handler_irq to use generic irq support

   TODO:
      The original implmentation of enable/disable had:

          if (irq < NR_IRQS)
               return;

      The new implmentation does not distingush between SBUS and cpu
      interrupts.
      I am no sure what is right here. I assume we need to do
      something for the cpu interrupts.

      I have not succeeded booting my sun4d box (with or without this patch)
      and my understanding of this platfrom is limited.
      So I would be a bit suprised if this works.

leon:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for leon
   Use leon_build_device_irq in leon_init_timers

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Hellstrom <daniel@gaisler.com>
Tested-by: Daniel Hellstrom <daniel@gaisler.com>
Tested-by: Marcel van Nies <morcles@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 22:11:40 -07:00

489 lines
14 KiB
C

/*
* sun4m irq support
*
* djhr: Hacked out of irq.c into a CPU dependent version.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
* Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
*/
#include <asm/timer.h>
#include <asm/traps.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
#include "irq.h"
#include "kernel.h"
/* Sample sun4m IRQ layout:
*
* 0x22 - Power
* 0x24 - ESP SCSI
* 0x26 - Lance ethernet
* 0x2b - Floppy
* 0x2c - Zilog uart
* 0x32 - SBUS level 0
* 0x33 - Parallel port, SBUS level 1
* 0x35 - SBUS level 2
* 0x37 - SBUS level 3
* 0x39 - Audio, Graphics card, SBUS level 4
* 0x3b - SBUS level 5
* 0x3d - SBUS level 6
*
* Each interrupt source has a mask bit in the interrupt registers.
* When the mask bit is set, this blocks interrupt deliver. So you
* clear the bit to enable the interrupt.
*
* Interrupts numbered less than 0x10 are software triggered interrupts
* and unused by Linux.
*
* Interrupt level assignment on sun4m:
*
* level source
* ------------------------------------------------------------
* 1 softint-1
* 2 softint-2, VME/SBUS level 1
* 3 softint-3, VME/SBUS level 2
* 4 softint-4, onboard SCSI
* 5 softint-5, VME/SBUS level 3
* 6 softint-6, onboard ETHERNET
* 7 softint-7, VME/SBUS level 4
* 8 softint-8, onboard VIDEO
* 9 softint-9, VME/SBUS level 5, Module Interrupt
* 10 softint-10, system counter/timer
* 11 softint-11, VME/SBUS level 6, Floppy
* 12 softint-12, Keyboard/Mouse, Serial
* 13 softint-13, VME/SBUS level 7, ISDN Audio
* 14 softint-14, per-processor counter/timer
* 15 softint-15, Asynchronous Errors (broadcast)
*
* Each interrupt source is masked distinctly in the sun4m interrupt
* registers. The PIL level alone is therefore ambiguous, since multiple
* interrupt sources map to a single PIL.
*
* This ambiguity is resolved in the 'intr' property for device nodes
* in the OF device tree. Each 'intr' property entry is composed of
* two 32-bit words. The first word is the IRQ priority value, which
* is what we're intersted in. The second word is the IRQ vector, which
* is unused.
*
* The low 4 bits of the IRQ priority indicate the PIL, and the upper
* 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20
* means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
*
* For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
* whereas a value of 0x33 is SBUS level 2. Here are some sample
* 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
* Tadpole S3 GX systems.
*
* esp: 0x24 onboard ESP SCSI
* le: 0x26 onboard Lance ETHERNET
* p9100: 0x32 SBUS level 1 P9100 video
* bpp: 0x33 SBUS level 2 BPP parallel port device
* DBRI: 0x39 SBUS level 5 DBRI ISDN audio
* SUNW,leo: 0x39 SBUS level 5 LEO video
* pcmcia: 0x3b SBUS level 6 PCMCIA controller
* uctrl: 0x3b SBUS level 6 UCTRL device
* modem: 0x3d SBUS level 7 MODEM
* zs: 0x2c onboard keyboard/mouse/serial
* floppy: 0x2b onboard Floppy
* power: 0x22 onboard power device (XXX unknown mask bit XXX)
*/
/* Code in entry.S needs to get at these register mappings. */
struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
struct sun4m_irq_global __iomem *sun4m_irq_global;
struct sun4m_handler_data {
bool percpu;
long mask;
};
/* Dave Redman (djhr@tadpole.co.uk)
* The sun4m interrupt registers.
*/
#define SUN4M_INT_ENABLE 0x80000000
#define SUN4M_INT_E14 0x00000080
#define SUN4M_INT_E10 0x00080000
#define SUN4M_HARD_INT(x) (0x000000001 << (x))
#define SUN4M_SOFT_INT(x) (0x000010000 << (x))
#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */
#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */
#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */
#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
#define SUN4M_INT_REALTIME 0x00080000 /* system timer */
#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */
#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \
SUN4M_INT_M2S_WRITE_ERR | \
SUN4M_INT_ECC_ERR | \
SUN4M_INT_VME_ERR)
#define SUN4M_INT_SBUS(x) (1 << (x+7))
#define SUN4M_INT_VME(x) (1 << (x))
/* Interrupt levels used by OBP */
#define OBP_INT_LEVEL_SOFT 0x10
#define OBP_INT_LEVEL_ONBOARD 0x20
#define OBP_INT_LEVEL_SBUS 0x30
#define OBP_INT_LEVEL_VME 0x40
#define SUN4M_TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10)
#define SUN4M_PROFILE_IRQ (OBP_INT_LEVEL_ONBOARD | 14)
static unsigned long sun4m_imask[0x50] = {
/* 0x00 - SMP */
0, SUN4M_SOFT_INT(1),
SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
/* 0x10 - soft */
0, SUN4M_SOFT_INT(1),
SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
/* 0x20 - onboard */
0, 0, 0, 0,
SUN4M_INT_SCSI, 0, SUN4M_INT_ETHERNET, 0,
SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
(SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
SUN4M_INT_AUDIO, SUN4M_INT_E14, SUN4M_INT_MODULE_ERR,
/* 0x30 - sbus */
0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
0, SUN4M_INT_SBUS(6), 0, 0,
/* 0x40 - vme */
0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
0, SUN4M_INT_VME(6), 0, 0
};
static void sun4m_mask_irq(struct irq_data *data)
{
struct sun4m_handler_data *handler_data = data->handler_data;
int cpu = smp_processor_id();
if (handler_data->mask) {
unsigned long flags;
local_irq_save(flags);
if (handler_data->percpu) {
sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->set);
} else {
sbus_writel(handler_data->mask, &sun4m_irq_global->mask_set);
}
local_irq_restore(flags);
}
}
static void sun4m_unmask_irq(struct irq_data *data)
{
struct sun4m_handler_data *handler_data = data->handler_data;
int cpu = smp_processor_id();
if (handler_data->mask) {
unsigned long flags;
local_irq_save(flags);
if (handler_data->percpu) {
sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->clear);
} else {
sbus_writel(handler_data->mask, &sun4m_irq_global->mask_clear);
}
local_irq_restore(flags);
}
}
static unsigned int sun4m_startup_irq(struct irq_data *data)
{
irq_link(data->irq);
sun4m_unmask_irq(data);
return 0;
}
static void sun4m_shutdown_irq(struct irq_data *data)
{
sun4m_mask_irq(data);
irq_unlink(data->irq);
}
static struct irq_chip sun4m_irq = {
.name = "sun4m",
.irq_startup = sun4m_startup_irq,
.irq_shutdown = sun4m_shutdown_irq,
.irq_mask = sun4m_mask_irq,
.irq_unmask = sun4m_unmask_irq,
};
static unsigned int sun4m_build_device_irq(struct platform_device *op,
unsigned int real_irq)
{
struct sun4m_handler_data *handler_data;
unsigned int irq;
unsigned int pil;
if (real_irq >= OBP_INT_LEVEL_VME) {
prom_printf("Bogus sun4m IRQ %u\n", real_irq);
prom_halt();
}
pil = (real_irq & 0xf);
irq = irq_alloc(real_irq, pil);
if (irq == 0)
goto out;
handler_data = irq_get_handler_data(irq);
if (unlikely(handler_data))
goto out;
handler_data = kzalloc(sizeof(struct sun4m_handler_data), GFP_ATOMIC);
if (unlikely(!handler_data)) {
prom_printf("IRQ: kzalloc(sun4m_handler_data) failed.\n");
prom_halt();
}
handler_data->mask = sun4m_imask[real_irq];
handler_data->percpu = real_irq < OBP_INT_LEVEL_ONBOARD;
irq_set_chip_and_handler_name(irq, &sun4m_irq,
handle_level_irq, "level");
irq_set_handler_data(irq, handler_data);
out:
return irq;
}
#ifdef CONFIG_SMP
static void sun4m_send_ipi(int cpu, int level)
{
sbus_writel(SUN4M_SOFT_INT(level), &sun4m_irq_percpu[cpu]->set);
}
static void sun4m_clear_ipi(int cpu, int level)
{
sbus_writel(SUN4M_SOFT_INT(level), &sun4m_irq_percpu[cpu]->clear);
}
static void sun4m_set_udt(int cpu)
{
sbus_writel(cpu, &sun4m_irq_global->interrupt_target);
}
#endif
struct sun4m_timer_percpu {
u32 l14_limit;
u32 l14_count;
u32 l14_limit_noclear;
u32 user_timer_start_stop;
};
static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
struct sun4m_timer_global {
u32 l10_limit;
u32 l10_count;
u32 l10_limit_noclear;
u32 reserved;
u32 timer_config;
};
static struct sun4m_timer_global __iomem *timers_global;
unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
static void sun4m_clear_clock_irq(void)
{
sbus_readl(&timers_global->l10_limit);
}
void sun4m_nmi(struct pt_regs *regs)
{
unsigned long afsr, afar, si;
printk(KERN_ERR "Aieee: sun4m NMI received!\n");
/* XXX HyperSparc hack XXX */
__asm__ __volatile__("mov 0x500, %%g1\n\t"
"lda [%%g1] 0x4, %0\n\t"
"mov 0x600, %%g1\n\t"
"lda [%%g1] 0x4, %1\n\t" :
"=r" (afsr), "=r" (afar));
printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
si = sbus_readl(&sun4m_irq_global->pending);
printk(KERN_ERR "si=%08lx\n", si);
if (si & SUN4M_INT_MODULE_ERR)
printk(KERN_ERR "Module async error\n");
if (si & SUN4M_INT_M2S_WRITE_ERR)
printk(KERN_ERR "MBus/SBus async error\n");
if (si & SUN4M_INT_ECC_ERR)
printk(KERN_ERR "ECC memory error\n");
if (si & SUN4M_INT_VME_ERR)
printk(KERN_ERR "VME async error\n");
printk(KERN_ERR "you lose buddy boy...\n");
show_regs(regs);
prom_halt();
}
void sun4m_unmask_profile_irq(void)
{
unsigned long flags;
local_irq_save(flags);
sbus_writel(sun4m_imask[SUN4M_PROFILE_IRQ], &sun4m_irq_global->mask_clear);
local_irq_restore(flags);
}
void sun4m_clear_profile_irq(int cpu)
{
sbus_readl(&timers_percpu[cpu]->l14_limit);
}
static void sun4m_load_profile_irq(int cpu, unsigned int limit)
{
sbus_writel(limit, &timers_percpu[cpu]->l14_limit);
}
static void __init sun4m_init_timers(irq_handler_t counter_fn)
{
struct device_node *dp = of_find_node_by_name(NULL, "counter");
int i, err, len, num_cpu_timers;
unsigned int irq;
const u32 *addr;
if (!dp) {
printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
return;
}
addr = of_get_property(dp, "address", &len);
of_node_put(dp);
if (!addr) {
printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
return;
}
num_cpu_timers = (len / sizeof(u32)) - 1;
for (i = 0; i < num_cpu_timers; i++) {
timers_percpu[i] = (void __iomem *)
(unsigned long) addr[i];
}
timers_global = (void __iomem *)
(unsigned long) addr[num_cpu_timers];
sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit);
master_l10_counter = &timers_global->l10_count;
irq = sun4m_build_device_irq(NULL, SUN4M_TIMER_IRQ);
err = request_irq(irq, counter_fn, IRQF_TIMER, "timer", NULL);
if (err) {
printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
err);
return;
}
for (i = 0; i < num_cpu_timers; i++)
sbus_writel(0, &timers_percpu[i]->l14_limit);
if (num_cpu_timers == 4)
sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
#ifdef CONFIG_SMP
{
unsigned long flags;
struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
/* For SMP we use the level 14 ticker, however the bootup code
* has copied the firmware's level 14 vector into the boot cpu's
* trap table, we must fix this now or we get squashed.
*/
local_irq_save(flags);
trap_table->inst_one = lvl14_save[0];
trap_table->inst_two = lvl14_save[1];
trap_table->inst_three = lvl14_save[2];
trap_table->inst_four = lvl14_save[3];
local_flush_cache_all();
local_irq_restore(flags);
}
#endif
}
void __init sun4m_init_IRQ(void)
{
struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
int len, i, mid, num_cpu_iregs;
const u32 *addr;
if (!dp) {
printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
return;
}
addr = of_get_property(dp, "address", &len);
of_node_put(dp);
if (!addr) {
printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
return;
}
num_cpu_iregs = (len / sizeof(u32)) - 1;
for (i = 0; i < num_cpu_iregs; i++) {
sun4m_irq_percpu[i] = (void __iomem *)
(unsigned long) addr[i];
}
sun4m_irq_global = (void __iomem *)
(unsigned long) addr[num_cpu_iregs];
local_irq_disable();
sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
if (num_cpu_iregs == 4)
sbus_writel(0, &sun4m_irq_global->interrupt_target);
BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
sparc_irq_config.init_timers = sun4m_init_timers;
sparc_irq_config.build_device_irq = sun4m_build_device_irq;
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(set_cpu_int, sun4m_send_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM);
#endif
/* Cannot enable interrupts until OBP ticker is disabled. */
}