mirror of
https://github.com/torvalds/linux.git
synced 2024-11-20 02:51:44 +00:00
16c4c52435
Filenames of devictree binding documentation seems to be arbitrary and for me it is unneeded hazzle to find the corresponding documentation for a specific driver. Naming the description the same as the driver is a lot easier and makes sense to me since the driver defines the binding it understands. Also, remove a reference in one source to the binding documentation, since path information easily gets stale. Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Cc: Rob Herring <robherring2@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
37 lines
878 B
Plaintext
37 lines
878 B
Plaintext
* NXP PNX I2C Controller
|
|
|
|
Required properties:
|
|
|
|
- reg: Offset and length of the register set for the device
|
|
- compatible: should be "nxp,pnx-i2c"
|
|
- interrupts: configure one interrupt line
|
|
- #address-cells: always 1 (for i2c addresses)
|
|
- #size-cells: always 0
|
|
- interrupt-parent: the phandle for the interrupt controller that
|
|
services interrupts for this device.
|
|
|
|
Optional properties:
|
|
|
|
- clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
|
|
|
|
Examples:
|
|
|
|
i2c1: i2c@400a0000 {
|
|
compatible = "nxp,pnx-i2c";
|
|
reg = <0x400a0000 0x100>;
|
|
interrupt-parent = <&mic>;
|
|
interrupts = <51 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c2: i2c@400a8000 {
|
|
compatible = "nxp,pnx-i2c";
|
|
reg = <0x400a8000 0x100>;
|
|
interrupt-parent = <&mic>;
|
|
interrupts = <50 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-frequency = <100000>;
|
|
};
|