linux/drivers/rtc/rtc-omap.c
David Brownell a2db8dfce8 [PATCH] rtc framewok: rtc_wkalrm.enabled reporting updates
Fix a glitch in the procfs dumping of whether the alarm IRQ is enabled: use
the traditional name (from drivers/char/rtc.c and many other places) of
"alarm_IRQ", not "alrm_wakeup" (which didn't even match the efirtc code, which
originated that reporting API).

Also, update a few of the RTC drivers to stop providing that duplicate status,
and/or to expose it properly when reporting the alarm state.  We really don't
want every RTC driver doing their own thing here...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:52 -08:00

572 lines
15 KiB
C

/*
* TI OMAP1 Real Time Clock interface for Linux
*
* Copyright (C) 2003 MontaVista Software, Inc.
* Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
*
* Copyright (C) 2006 David Brownell (new RTC framework)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/mach/time.h>
/* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock
* with century-range alarm matching, driven by the 32kHz clock.
*
* The main user-visible ways it differs from PC RTCs are by omitting
* "don't care" alarm fields and sub-second periodic IRQs, and having
* an autoadjust mechanism to calibrate to the true oscillator rate.
*
* Board-specific wiring options include using split power mode with
* RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset),
* and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from
* low power modes). See the BOARD-SPECIFIC CUSTOMIZATION comment.
*/
#define OMAP_RTC_BASE 0xfffb4800
/* RTC registers */
#define OMAP_RTC_SECONDS_REG 0x00
#define OMAP_RTC_MINUTES_REG 0x04
#define OMAP_RTC_HOURS_REG 0x08
#define OMAP_RTC_DAYS_REG 0x0C
#define OMAP_RTC_MONTHS_REG 0x10
#define OMAP_RTC_YEARS_REG 0x14
#define OMAP_RTC_WEEKS_REG 0x18
#define OMAP_RTC_ALARM_SECONDS_REG 0x20
#define OMAP_RTC_ALARM_MINUTES_REG 0x24
#define OMAP_RTC_ALARM_HOURS_REG 0x28
#define OMAP_RTC_ALARM_DAYS_REG 0x2c
#define OMAP_RTC_ALARM_MONTHS_REG 0x30
#define OMAP_RTC_ALARM_YEARS_REG 0x34
#define OMAP_RTC_CTRL_REG 0x40
#define OMAP_RTC_STATUS_REG 0x44
#define OMAP_RTC_INTERRUPTS_REG 0x48
#define OMAP_RTC_COMP_LSB_REG 0x4c
#define OMAP_RTC_COMP_MSB_REG 0x50
#define OMAP_RTC_OSC_REG 0x54
/* OMAP_RTC_CTRL_REG bit fields: */
#define OMAP_RTC_CTRL_SPLIT (1<<7)
#define OMAP_RTC_CTRL_DISABLE (1<<6)
#define OMAP_RTC_CTRL_SET_32_COUNTER (1<<5)
#define OMAP_RTC_CTRL_TEST (1<<4)
#define OMAP_RTC_CTRL_MODE_12_24 (1<<3)
#define OMAP_RTC_CTRL_AUTO_COMP (1<<2)
#define OMAP_RTC_CTRL_ROUND_30S (1<<1)
#define OMAP_RTC_CTRL_STOP (1<<0)
/* OMAP_RTC_STATUS_REG bit fields: */
#define OMAP_RTC_STATUS_POWER_UP (1<<7)
#define OMAP_RTC_STATUS_ALARM (1<<6)
#define OMAP_RTC_STATUS_1D_EVENT (1<<5)
#define OMAP_RTC_STATUS_1H_EVENT (1<<4)
#define OMAP_RTC_STATUS_1M_EVENT (1<<3)
#define OMAP_RTC_STATUS_1S_EVENT (1<<2)
#define OMAP_RTC_STATUS_RUN (1<<1)
#define OMAP_RTC_STATUS_BUSY (1<<0)
/* OMAP_RTC_INTERRUPTS_REG bit fields: */
#define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3)
#define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2)
#define rtc_read(addr) omap_readb(OMAP_RTC_BASE + (addr))
#define rtc_write(val, addr) omap_writeb(val, OMAP_RTC_BASE + (addr))
/* platform_bus isn't hotpluggable, so for static linkage it'd be safe
* to get rid of probe() and remove() code ... too bad the driver struct
* remembers probe(), that's about 25% of the runtime footprint!!
*/
#ifndef MODULE
#undef __devexit
#undef __devexit_p
#define __devexit __exit
#define __devexit_p __exit_p
#endif
/* we rely on the rtc framework to handle locking (rtc->ops_lock),
* so the only other requirement is that register accesses which
* require BUSY to be clear are made with IRQs locally disabled
*/
static void rtc_wait_not_busy(void)
{
int count = 0;
u8 status;
/* BUSY may stay active for 1/32768 second (~30 usec) */
for (count = 0; count < 50; count++) {
status = rtc_read(OMAP_RTC_STATUS_REG);
if ((status & (u8)OMAP_RTC_STATUS_BUSY) == 0)
break;
udelay(1);
}
/* now we have ~15 usec to read/write various registers */
}
static irqreturn_t rtc_irq(int irq, void *class_dev)
{
unsigned long events = 0;
u8 irq_data;
irq_data = rtc_read(OMAP_RTC_STATUS_REG);
/* alarm irq? */
if (irq_data & OMAP_RTC_STATUS_ALARM) {
rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
events |= RTC_IRQF | RTC_AF;
}
/* 1/sec periodic/update irq? */
if (irq_data & OMAP_RTC_STATUS_1S_EVENT)
events |= RTC_IRQF | RTC_UF;
rtc_update_irq(class_dev, 1, events);
return IRQ_HANDLED;
}
#ifdef CONFIG_RTC_INTF_DEV
static int
omap_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
u8 reg;
switch (cmd) {
case RTC_AIE_OFF:
case RTC_AIE_ON:
case RTC_UIE_OFF:
case RTC_UIE_ON:
break;
default:
return -ENOIOCTLCMD;
}
local_irq_disable();
rtc_wait_not_busy();
reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
switch (cmd) {
/* AIE = Alarm Interrupt Enable */
case RTC_AIE_OFF:
reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
break;
case RTC_AIE_ON:
reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
break;
/* UIE = Update Interrupt Enable (1/second) */
case RTC_UIE_OFF:
reg &= ~OMAP_RTC_INTERRUPTS_IT_TIMER;
break;
case RTC_UIE_ON:
reg |= OMAP_RTC_INTERRUPTS_IT_TIMER;
break;
}
rtc_wait_not_busy();
rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
local_irq_enable();
return 0;
}
#else
#define omap_rtc_ioctl NULL
#endif
/* this hardware doesn't support "don't care" alarm fields */
static int tm2bcd(struct rtc_time *tm)
{
if (rtc_valid_tm(tm) != 0)
return -EINVAL;
tm->tm_sec = BIN2BCD(tm->tm_sec);
tm->tm_min = BIN2BCD(tm->tm_min);
tm->tm_hour = BIN2BCD(tm->tm_hour);
tm->tm_mday = BIN2BCD(tm->tm_mday);
tm->tm_mon = BIN2BCD(tm->tm_mon + 1);
/* epoch == 1900 */
if (tm->tm_year < 100 || tm->tm_year > 199)
return -EINVAL;
tm->tm_year = BIN2BCD(tm->tm_year - 100);
return 0;
}
static void bcd2tm(struct rtc_time *tm)
{
tm->tm_sec = BCD2BIN(tm->tm_sec);
tm->tm_min = BCD2BIN(tm->tm_min);
tm->tm_hour = BCD2BIN(tm->tm_hour);
tm->tm_mday = BCD2BIN(tm->tm_mday);
tm->tm_mon = BCD2BIN(tm->tm_mon) - 1;
/* epoch == 1900 */
tm->tm_year = BCD2BIN(tm->tm_year) + 100;
}
static int omap_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
/* we don't report wday/yday/isdst ... */
local_irq_disable();
rtc_wait_not_busy();
tm->tm_sec = rtc_read(OMAP_RTC_SECONDS_REG);
tm->tm_min = rtc_read(OMAP_RTC_MINUTES_REG);
tm->tm_hour = rtc_read(OMAP_RTC_HOURS_REG);
tm->tm_mday = rtc_read(OMAP_RTC_DAYS_REG);
tm->tm_mon = rtc_read(OMAP_RTC_MONTHS_REG);
tm->tm_year = rtc_read(OMAP_RTC_YEARS_REG);
local_irq_enable();
bcd2tm(tm);
return 0;
}
static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
if (tm2bcd(tm) < 0)
return -EINVAL;
local_irq_disable();
rtc_wait_not_busy();
rtc_write(tm->tm_year, OMAP_RTC_YEARS_REG);
rtc_write(tm->tm_mon, OMAP_RTC_MONTHS_REG);
rtc_write(tm->tm_mday, OMAP_RTC_DAYS_REG);
rtc_write(tm->tm_hour, OMAP_RTC_HOURS_REG);
rtc_write(tm->tm_min, OMAP_RTC_MINUTES_REG);
rtc_write(tm->tm_sec, OMAP_RTC_SECONDS_REG);
local_irq_enable();
return 0;
}
static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
local_irq_disable();
rtc_wait_not_busy();
alm->time.tm_sec = rtc_read(OMAP_RTC_ALARM_SECONDS_REG);
alm->time.tm_min = rtc_read(OMAP_RTC_ALARM_MINUTES_REG);
alm->time.tm_hour = rtc_read(OMAP_RTC_ALARM_HOURS_REG);
alm->time.tm_mday = rtc_read(OMAP_RTC_ALARM_DAYS_REG);
alm->time.tm_mon = rtc_read(OMAP_RTC_ALARM_MONTHS_REG);
alm->time.tm_year = rtc_read(OMAP_RTC_ALARM_YEARS_REG);
local_irq_enable();
bcd2tm(&alm->time);
alm->enabled = !!(rtc_read(OMAP_RTC_INTERRUPTS_REG)
& OMAP_RTC_INTERRUPTS_IT_ALARM);
return 0;
}
static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
u8 reg;
/* Much userspace code uses RTC_ALM_SET, thus "don't care" for
* day/month/year specifies alarms up to 24 hours in the future.
* So we need to handle that ... but let's ignore the "don't care"
* values for hours/minutes/seconds.
*/
if (alm->time.tm_mday <= 0
&& alm->time.tm_mon < 0
&& alm->time.tm_year < 0) {
struct rtc_time tm;
unsigned long now, then;
omap_rtc_read_time(dev, &tm);
rtc_tm_to_time(&tm, &now);
alm->time.tm_mday = tm.tm_mday;
alm->time.tm_mon = tm.tm_mon;
alm->time.tm_year = tm.tm_year;
rtc_tm_to_time(&alm->time, &then);
/* sometimes the alarm wraps into tomorrow */
if (then < now) {
rtc_time_to_tm(now + 24 * 60 * 60, &tm);
alm->time.tm_mday = tm.tm_mday;
alm->time.tm_mon = tm.tm_mon;
alm->time.tm_year = tm.tm_year;
}
}
if (tm2bcd(&alm->time) < 0)
return -EINVAL;
local_irq_disable();
rtc_wait_not_busy();
rtc_write(alm->time.tm_year, OMAP_RTC_ALARM_YEARS_REG);
rtc_write(alm->time.tm_mon, OMAP_RTC_ALARM_MONTHS_REG);
rtc_write(alm->time.tm_mday, OMAP_RTC_ALARM_DAYS_REG);
rtc_write(alm->time.tm_hour, OMAP_RTC_ALARM_HOURS_REG);
rtc_write(alm->time.tm_min, OMAP_RTC_ALARM_MINUTES_REG);
rtc_write(alm->time.tm_sec, OMAP_RTC_ALARM_SECONDS_REG);
reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
if (alm->enabled)
reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
else
reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
local_irq_enable();
return 0;
}
static struct rtc_class_ops omap_rtc_ops = {
.ioctl = omap_rtc_ioctl,
.read_time = omap_rtc_read_time,
.set_time = omap_rtc_set_time,
.read_alarm = omap_rtc_read_alarm,
.set_alarm = omap_rtc_set_alarm,
};
static int omap_rtc_alarm;
static int omap_rtc_timer;
static int __devinit omap_rtc_probe(struct platform_device *pdev)
{
struct resource *res, *mem;
struct rtc_device *rtc;
u8 reg, new_ctrl;
omap_rtc_timer = platform_get_irq(pdev, 0);
if (omap_rtc_timer <= 0) {
pr_debug("%s: no update irq?\n", pdev->name);
return -ENOENT;
}
omap_rtc_alarm = platform_get_irq(pdev, 1);
if (omap_rtc_alarm <= 0) {
pr_debug("%s: no alarm irq?\n", pdev->name);
return -ENOENT;
}
/* NOTE: using static mapping for RTC registers */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res && res->start != OMAP_RTC_BASE) {
pr_debug("%s: RTC registers at %08x, expected %08x\n",
pdev->name, (unsigned) res->start, OMAP_RTC_BASE);
return -ENOENT;
}
if (res)
mem = request_mem_region(res->start,
res->end - res->start + 1,
pdev->name);
else
mem = NULL;
if (!mem) {
pr_debug("%s: RTC registers at %08x are not free\n",
pdev->name, OMAP_RTC_BASE);
return -EBUSY;
}
rtc = rtc_device_register(pdev->name, &pdev->dev,
&omap_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
pr_debug("%s: can't register RTC device, err %ld\n",
pdev->name, PTR_ERR(rtc));
goto fail;
}
platform_set_drvdata(pdev, rtc);
class_set_devdata(&rtc->class_dev, mem);
/* clear pending irqs, and set 1/second periodic,
* which we'll use instead of update irqs
*/
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
/* clear old status */
reg = rtc_read(OMAP_RTC_STATUS_REG);
if (reg & (u8) OMAP_RTC_STATUS_POWER_UP) {
pr_info("%s: RTC power up reset detected\n",
pdev->name);
rtc_write(OMAP_RTC_STATUS_POWER_UP, OMAP_RTC_STATUS_REG);
}
if (reg & (u8) OMAP_RTC_STATUS_ALARM)
rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
/* handle periodic and alarm irqs */
if (request_irq(omap_rtc_timer, rtc_irq, SA_INTERRUPT,
rtc->class_dev.class_id, &rtc->class_dev)) {
pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n",
pdev->name, omap_rtc_timer);
goto fail0;
}
if (request_irq(omap_rtc_alarm, rtc_irq, SA_INTERRUPT,
rtc->class_dev.class_id, &rtc->class_dev)) {
pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n",
pdev->name, omap_rtc_alarm);
goto fail1;
}
/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
reg = rtc_read(OMAP_RTC_CTRL_REG);
if (reg & (u8) OMAP_RTC_CTRL_STOP)
pr_info("%s: already running\n", pdev->name);
/* force to 24 hour mode */
new_ctrl = reg & ~(OMAP_RTC_CTRL_SPLIT|OMAP_RTC_CTRL_AUTO_COMP);
new_ctrl |= OMAP_RTC_CTRL_STOP;
/* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE:
*
* - Boards wired so that RTC_WAKE_INT does something, and muxed
* right (W13_1610_RTC_WAKE_INT is the default after chip reset),
* should initialize the device wakeup flag appropriately.
*
* - Boards wired so RTC_ON_nOFF is used as the reset signal,
* rather than nPWRON_RESET, should forcibly enable split
* power mode. (Some chip errata report that RTC_CTRL_SPLIT
* is write-only, and always reads as zero...)
*/
device_init_wakeup(&pdev->dev, 0);
if (new_ctrl & (u8) OMAP_RTC_CTRL_SPLIT)
pr_info("%s: split power mode\n", pdev->name);
if (reg != new_ctrl)
rtc_write(new_ctrl, OMAP_RTC_CTRL_REG);
return 0;
fail1:
free_irq(omap_rtc_timer, NULL);
fail0:
rtc_device_unregister(rtc);
fail:
release_resource(mem);
return -EIO;
}
static int __devexit omap_rtc_remove(struct platform_device *pdev)
{
struct rtc_device *rtc = platform_get_drvdata(pdev);;
device_init_wakeup(&pdev->dev, 0);
/* leave rtc running, but disable irqs */
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
free_irq(omap_rtc_timer, rtc);
free_irq(omap_rtc_alarm, rtc);
release_resource(class_get_devdata(&rtc->class_dev));
rtc_device_unregister(rtc);
return 0;
}
#ifdef CONFIG_PM
static struct timespec rtc_delta;
static u8 irqstat;
static int omap_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
struct rtc_time rtc_tm;
struct timespec time;
time.tv_nsec = 0;
omap_rtc_read_time(NULL, &rtc_tm);
rtc_tm_to_time(&rtc_tm, &time.tv_sec);
save_time_delta(&rtc_delta, &time);
irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG);
/* FIXME the RTC alarm is not currently acting as a wakeup event
* source, and in fact this enable() call is just saving a flag
* that's never used...
*/
if (device_may_wakeup(&pdev->dev))
enable_irq_wake(omap_rtc_alarm);
else
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
return 0;
}
static int omap_rtc_resume(struct platform_device *pdev)
{
struct rtc_time rtc_tm;
struct timespec time;
time.tv_nsec = 0;
omap_rtc_read_time(NULL, &rtc_tm);
rtc_tm_to_time(&rtc_tm, &time.tv_sec);
restore_time_delta(&rtc_delta, &time);
if (device_may_wakeup(&pdev->dev))
disable_irq_wake(omap_rtc_alarm);
else
rtc_write(irqstat, OMAP_RTC_INTERRUPTS_REG);
return 0;
}
#else
#define omap_rtc_suspend NULL
#define omap_rtc_resume NULL
#endif
static void omap_rtc_shutdown(struct platform_device *pdev)
{
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
}
MODULE_ALIAS("omap_rtc");
static struct platform_driver omap_rtc_driver = {
.probe = omap_rtc_probe,
.remove = __devexit_p(omap_rtc_remove),
.suspend = omap_rtc_suspend,
.resume = omap_rtc_resume,
.shutdown = omap_rtc_shutdown,
.driver = {
.name = "omap_rtc",
.owner = THIS_MODULE,
},
};
static int __init rtc_init(void)
{
return platform_driver_register(&omap_rtc_driver);
}
module_init(rtc_init);
static void __exit rtc_exit(void)
{
platform_driver_unregister(&omap_rtc_driver);
}
module_exit(rtc_exit);
MODULE_AUTHOR("George G. Davis (and others)");
MODULE_LICENSE("GPL");