linux/include/asm-xtensa/variant-fsf/tie.h
Chris Zankel c658eac628 [XTENSA] Add support for configurable registers and coprocessors
The Xtensa architecture allows to define custom instructions and
registers. Registers that are bound to a coprocessor are only
accessible if the corresponding enable bit is set, which allows
to implement a 'lazy' context switch mechanism. Other registers
needs to be saved and restore at the time of the context switch
or during interrupt handling.

This patch adds support for these additional states:

- save and restore registers that are used by the compiler upon
  interrupt entry and exit.
- context switch additional registers unbound to any coprocessor
- 'lazy' context switch of registers bound to a coprocessor
- ptrace interface to provide access to additional registers
- update configuration files in include/asm-xtensa/variant-fsf

Signed-off-by: Chris Zankel <chris@zankel.net>
2008-02-13 17:41:43 -08:00

78 lines
2.5 KiB
C

/*
* This header file describes this specific Xtensa processor's TIE extensions
* that extend basic Xtensa core functionality. It is customized to this
* Xtensa processor configuration.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1999-2007 Tensilica Inc.
*/
#ifndef _XTENSA_CORE_TIE_H
#define _XTENSA_CORE_TIE_H
#define XCHAL_CP_NUM 0 /* number of coprocessors */
#define XCHAL_CP_MAX 0 /* max CP ID + 1 (0 if none) */
#define XCHAL_CP_MASK 0x00 /* bitmask of all CPs by ID */
#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */
/* Basic parameters of each coprocessor: */
#define XCHAL_CP7_NAME "XTIOP"
#define XCHAL_CP7_IDENT XTIOP
#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */
#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */
#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */
/* Filler info for unassigned coprocessors, to simplify arrays etc: */
#define XCHAL_NCP_SA_SIZE 0
#define XCHAL_NCP_SA_ALIGN 1
#define XCHAL_CP0_SA_SIZE 0
#define XCHAL_CP0_SA_ALIGN 1
#define XCHAL_CP1_SA_SIZE 0
#define XCHAL_CP1_SA_ALIGN 1
#define XCHAL_CP2_SA_SIZE 0
#define XCHAL_CP2_SA_ALIGN 1
#define XCHAL_CP3_SA_SIZE 0
#define XCHAL_CP3_SA_ALIGN 1
#define XCHAL_CP4_SA_SIZE 0
#define XCHAL_CP4_SA_ALIGN 1
#define XCHAL_CP5_SA_SIZE 0
#define XCHAL_CP5_SA_ALIGN 1
#define XCHAL_CP6_SA_SIZE 0
#define XCHAL_CP6_SA_ALIGN 1
/* Save area for non-coprocessor optional and custom (TIE) state: */
#define XCHAL_NCP_SA_SIZE 0
#define XCHAL_NCP_SA_ALIGN 1
/* Total save area for optional and custom state (NCP + CPn): */
#define XCHAL_TOTAL_SA_SIZE 0 /* with 16-byte align padding */
#define XCHAL_TOTAL_SA_ALIGN 1 /* actual minimum alignment */
#define XCHAL_NCP_SA_NUM 0
#define XCHAL_NCP_SA_LIST(s)
#define XCHAL_CP0_SA_NUM 0
#define XCHAL_CP0_SA_LIST(s)
#define XCHAL_CP1_SA_NUM 0
#define XCHAL_CP1_SA_LIST(s)
#define XCHAL_CP2_SA_NUM 0
#define XCHAL_CP2_SA_LIST(s)
#define XCHAL_CP3_SA_NUM 0
#define XCHAL_CP3_SA_LIST(s)
#define XCHAL_CP4_SA_NUM 0
#define XCHAL_CP4_SA_LIST(s)
#define XCHAL_CP5_SA_NUM 0
#define XCHAL_CP5_SA_LIST(s)
#define XCHAL_CP6_SA_NUM 0
#define XCHAL_CP6_SA_LIST(s)
#define XCHAL_CP7_SA_NUM 0
#define XCHAL_CP7_SA_LIST(s)
/* Byte length of instruction from its first nibble (op0 field), per FLIX. */
#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
#endif /*_XTENSA_CORE_TIE_H*/