linux/arch/arm/plat-samsung/Makefile
Ben Dooks 0317e52e04 ARM: SAMSUNG: Add support for interrupt wakeup-sources
Add support for wakeup-mask style interrupts that share a
single mask register for various different interrupts. This
registers a set of interrupt->bit mappings and the register
they belong to.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20 21:07:01 +09:00

69 lines
1.5 KiB
Makefile

# arch/arm/plat-s3c64xx/Makefile
#
# Copyright 2009 Simtec Electronics
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n := dummy.o
obj- :=
# Objects we always build independent of SoC choice
obj-y += init.o
obj-y += time.o
obj-y += clock.o
obj-y += pwm-clock.o
obj-y += gpio.o
obj-y += gpio-config.o
obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT) += gpiolib.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o
obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
# ADC
obj-$(CONFIG_S3C_ADC) += adc.o
# devices
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-y += dev-uart.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o
obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o
obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o
obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o
# DMA support
obj-$(CONFIG_S3C_DMA) += dma.o
obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o
# PM support
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
# PWM support
obj-$(CONFIG_HAVE_PWM) += pwm.o