..
board-2430sdp.c
ARM: OMAP: Add calls to omap2_set_globals_*()
2008-05-09 10:25:02 -07:00
board-apollon.c
[ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_*
2008-07-27 09:46:18 +01:00
board-generic.c
ARM: OMAP: Add calls to omap2_set_globals_*()
2008-05-09 10:25:02 -07:00
board-h4.c
ARM: OMAP: Add calls to omap2_set_globals_*()
2008-05-09 10:25:02 -07:00
clock24xx.c
ARM: OMAP2: Clock: New OMAP2/3 DPLL rate rounding algorithm
2008-07-03 12:24:46 +03:00
clock24xx.h
ARM: OMAP2: Clock: New OMAP2/3 DPLL rate rounding algorithm
2008-07-03 12:24:46 +03:00
clock34xx.c
ARM: OMAP2: Clock: Add OMAP3 DPLL autoidle functions
2008-07-03 12:24:45 +03:00
clock34xx.h
ARM: OMAP2: Clock: New OMAP2/3 DPLL rate rounding algorithm
2008-07-03 12:24:46 +03:00
clock.c
ARM: OMAP2: Clock: New OMAP2/3 DPLL rate rounding algorithm
2008-07-03 12:24:46 +03:00
clock.h
ARM: OMAP2: Clock: New OMAP2/3 DPLL rate rounding algorithm
2008-07-03 12:24:46 +03:00
cm-regbits-24xx.h
ARM: OMAP2: Add common register access for 24xx and 34xx
2008-04-14 10:27:25 -07:00
cm-regbits-34xx.h
ARM: OMAP2: Clock: Add OMAP3 DPLL autoidle functions
2008-07-03 12:24:45 +03:00
cm.h
ARM: OMAP2: Clock: Add OMAP3 DPLL autoidle functions
2008-07-03 12:24:45 +03:00
control.c
ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omap
2008-07-03 12:24:44 +03:00
devices.c
ARM: OMAP: Add minimal OMAP2430 support
2007-09-20 09:59:20 -07:00
gpmc.c
ARM: OMAP: Correcting the gpmc prefetch control register address
2008-06-06 15:44:12 -07:00
id.c
ARM: OMAP: Add OMAP chip type structure; clean up mach-omap2/id.c
2008-07-03 12:24:45 +03:00
io.c
ARM: OMAP2: Register the L4 io bus to boot OMAP2
2008-03-06 13:28:06 +02:00
irq.c
ARM: OMAP: Optimize INTC register accesses and enable autoidling
2007-09-20 09:59:19 -07:00
Kconfig
ARM: OMAP: Add minimal OMAP2430 support
2007-09-20 09:59:20 -07:00
mailbox.c
ARM: OMAP: Fix Unbalanced enable for IRQ in omap mailbox
2008-05-09 10:25:03 -07:00
Makefile
ARM: OMAP: McBSP: Add support for mcbsp on mach-omap2
2008-07-03 12:24:40 +03:00
Makefile.boot
mcbsp.c
ARM: OMAP: McBSP: Add support for mcbsp on mach-omap2
2008-07-03 12:24:40 +03:00
memory.c
ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omap
2008-07-03 12:24:44 +03:00
memory.h
ARM: OMAP2: Change 24xx to use shared clock code and new reg access
2008-04-14 10:29:38 -07:00
mux.c
ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omap
2008-07-03 12:24:44 +03:00
pm.c
[ARM] dyntick: Remove obsolete and unused ARM dyntick support
2008-05-12 17:39:14 +01:00
prcm-common.h
ARM: OMAP: SRAM: Split sram24xx.S into sram242x.S and sram243x.S
2008-07-03 12:24:38 +03:00
prcm.c
ARM: OMAP: Turn CM and PRM access into functions
2008-07-03 12:24:44 +03:00
prm-regbits-24xx.h
ARM: OMAP2: Add common register access for 24xx and 34xx
2008-04-14 10:27:25 -07:00
prm-regbits-34xx.h
ARM: OMAP2: Add register access for 34xx
2008-04-14 10:29:37 -07:00
prm.h
ARM: OMAP: Turn CM and PRM access into functions
2008-07-03 12:24:44 +03:00
sdrc.h
ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omap
2008-07-03 12:24:44 +03:00
serial.c
ARM: OMAP: Enable serial idling and wakeup features
2007-08-22 00:42:52 -07:00
sleep.S
ARM: OMAP2: Change 24xx to use new register access
2008-04-14 10:29:37 -07:00
sram242x.S
ARM: OMAP: SRAM: Split sram24xx.S into sram242x.S and sram243x.S
2008-07-03 12:24:38 +03:00
sram243x.S
ARM: OMAP: SRAM: Split sram24xx.S into sram242x.S and sram243x.S
2008-07-03 12:24:38 +03:00
timer-gp.c
ARM: OMAP: DMTimer: Optimize by adding load and start
2008-07-03 12:24:30 +03:00
usb-tusb6010.c
ARM: OMAP: TUSB EVM init
2007-09-20 09:59:21 -07:00