linux/drivers/power/supply/axp20x_usb_power.c
Quentin Schulz c279adafe6 power: supply: axp20x_usb_power: add support for AXP813
This adds support for AXP813 PMIC. It is almost the same as AXP22X but
has a different current limit.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-04-17 23:23:15 +02:00

573 lines
14 KiB
C

/*
* AXP20x PMIC USB power supply status driver
*
* Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
* Copyright (C) 2014 Bruno Prémont <bonbons@linux-vserver.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/axp20x.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/iio/consumer.h>
#include <linux/workqueue.h>
#define DRVNAME "axp20x-usb-power-supply"
#define AXP20X_PWR_STATUS_VBUS_PRESENT BIT(5)
#define AXP20X_PWR_STATUS_VBUS_USED BIT(4)
#define AXP20X_USB_STATUS_VBUS_VALID BIT(2)
#define AXP20X_VBUS_VHOLD_uV(b) (4000000 + (((b) >> 3) & 7) * 100000)
#define AXP20X_VBUS_VHOLD_MASK GENMASK(5, 3)
#define AXP20X_VBUS_VHOLD_OFFSET 3
#define AXP20X_VBUS_CLIMIT_MASK 3
#define AXP20X_VBUS_CLIMIT_900mA 0
#define AXP20X_VBUS_CLIMIT_500mA 1
#define AXP20X_VBUS_CLIMIT_100mA 2
#define AXP20X_VBUS_CLIMIT_NONE 3
#define AXP813_VBUS_CLIMIT_900mA 0
#define AXP813_VBUS_CLIMIT_1500mA 1
#define AXP813_VBUS_CLIMIT_2000mA 2
#define AXP813_VBUS_CLIMIT_2500mA 3
#define AXP20X_ADC_EN1_VBUS_CURR BIT(2)
#define AXP20X_ADC_EN1_VBUS_VOLT BIT(3)
#define AXP20X_VBUS_MON_VBUS_VALID BIT(3)
/*
* Note do not raise the debounce time, we must report Vusb high within
* 100ms otherwise we get Vbus errors in musb.
*/
#define DEBOUNCE_TIME msecs_to_jiffies(50)
struct axp20x_usb_power {
struct device_node *np;
struct regmap *regmap;
struct power_supply *supply;
enum axp20x_variants axp20x_id;
struct iio_channel *vbus_v;
struct iio_channel *vbus_i;
struct delayed_work vbus_detect;
unsigned int old_status;
};
static irqreturn_t axp20x_usb_power_irq(int irq, void *devid)
{
struct axp20x_usb_power *power = devid;
power_supply_changed(power->supply);
return IRQ_HANDLED;
}
static void axp20x_usb_power_poll_vbus(struct work_struct *work)
{
struct axp20x_usb_power *power =
container_of(work, struct axp20x_usb_power, vbus_detect.work);
unsigned int val;
int ret;
ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &val);
if (ret)
goto out;
val &= (AXP20X_PWR_STATUS_VBUS_PRESENT | AXP20X_PWR_STATUS_VBUS_USED);
if (val != power->old_status)
power_supply_changed(power->supply);
power->old_status = val;
out:
mod_delayed_work(system_wq, &power->vbus_detect, DEBOUNCE_TIME);
}
static bool axp20x_usb_vbus_needs_polling(struct axp20x_usb_power *power)
{
if (power->axp20x_id >= AXP221_ID)
return true;
return false;
}
static int axp20x_get_current_max(struct axp20x_usb_power *power, int *val)
{
unsigned int v;
int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
if (ret)
return ret;
switch (v & AXP20X_VBUS_CLIMIT_MASK) {
case AXP20X_VBUS_CLIMIT_100mA:
if (power->axp20x_id == AXP221_ID)
*val = -1; /* No 100mA limit */
else
*val = 100000;
break;
case AXP20X_VBUS_CLIMIT_500mA:
*val = 500000;
break;
case AXP20X_VBUS_CLIMIT_900mA:
*val = 900000;
break;
case AXP20X_VBUS_CLIMIT_NONE:
*val = -1;
break;
}
return 0;
}
static int axp813_get_current_max(struct axp20x_usb_power *power, int *val)
{
unsigned int v;
int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
if (ret)
return ret;
switch (v & AXP20X_VBUS_CLIMIT_MASK) {
case AXP813_VBUS_CLIMIT_900mA:
*val = 900000;
break;
case AXP813_VBUS_CLIMIT_1500mA:
*val = 1500000;
break;
case AXP813_VBUS_CLIMIT_2000mA:
*val = 2000000;
break;
case AXP813_VBUS_CLIMIT_2500mA:
*val = 2500000;
break;
}
return 0;
}
static int axp20x_usb_power_get_property(struct power_supply *psy,
enum power_supply_property psp, union power_supply_propval *val)
{
struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
unsigned int input, v;
int ret;
switch (psp) {
case POWER_SUPPLY_PROP_VOLTAGE_MIN:
ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
if (ret)
return ret;
val->intval = AXP20X_VBUS_VHOLD_uV(v);
return 0;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
ret = iio_read_channel_processed(power->vbus_v,
&val->intval);
if (ret)
return ret;
/*
* IIO framework gives mV but Power Supply framework
* gives uV.
*/
val->intval *= 1000;
return 0;
}
ret = axp20x_read_variable_width(power->regmap,
AXP20X_VBUS_V_ADC_H, 12);
if (ret < 0)
return ret;
val->intval = ret * 1700; /* 1 step = 1.7 mV */
return 0;
case POWER_SUPPLY_PROP_CURRENT_MAX:
if (power->axp20x_id == AXP813_ID)
return axp813_get_current_max(power, &val->intval);
return axp20x_get_current_max(power, &val->intval);
case POWER_SUPPLY_PROP_CURRENT_NOW:
if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
ret = iio_read_channel_processed(power->vbus_i,
&val->intval);
if (ret)
return ret;
/*
* IIO framework gives mA but Power Supply framework
* gives uA.
*/
val->intval *= 1000;
return 0;
}
ret = axp20x_read_variable_width(power->regmap,
AXP20X_VBUS_I_ADC_H, 12);
if (ret < 0)
return ret;
val->intval = ret * 375; /* 1 step = 0.375 mA */
return 0;
default:
break;
}
/* All the properties below need the input-status reg value */
ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input);
if (ret)
return ret;
switch (psp) {
case POWER_SUPPLY_PROP_HEALTH:
if (!(input & AXP20X_PWR_STATUS_VBUS_PRESENT)) {
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
break;
}
val->intval = POWER_SUPPLY_HEALTH_GOOD;
if (power->axp20x_id == AXP202_ID) {
ret = regmap_read(power->regmap,
AXP20X_USB_OTG_STATUS, &v);
if (ret)
return ret;
if (!(v & AXP20X_USB_STATUS_VBUS_VALID))
val->intval =
POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
}
break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_PRESENT);
break;
case POWER_SUPPLY_PROP_ONLINE:
val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_USED);
break;
default:
return -EINVAL;
}
return 0;
}
static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power,
int intval)
{
int val;
switch (intval) {
case 4000000:
case 4100000:
case 4200000:
case 4300000:
case 4400000:
case 4500000:
case 4600000:
case 4700000:
val = (intval - 4000000) / 100000;
return regmap_update_bits(power->regmap,
AXP20X_VBUS_IPSOUT_MGMT,
AXP20X_VBUS_VHOLD_MASK,
val << AXP20X_VBUS_VHOLD_OFFSET);
default:
return -EINVAL;
}
return -EINVAL;
}
static int axp813_usb_power_set_current_max(struct axp20x_usb_power *power,
int intval)
{
int val;
switch (intval) {
case 900000:
return regmap_update_bits(power->regmap,
AXP20X_VBUS_IPSOUT_MGMT,
AXP20X_VBUS_CLIMIT_MASK,
AXP813_VBUS_CLIMIT_900mA);
case 1500000:
case 2000000:
case 2500000:
val = (intval - 1000000) / 500000;
return regmap_update_bits(power->regmap,
AXP20X_VBUS_IPSOUT_MGMT,
AXP20X_VBUS_CLIMIT_MASK, val);
default:
return -EINVAL;
}
return -EINVAL;
}
static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
int intval)
{
int val;
switch (intval) {
case 100000:
if (power->axp20x_id == AXP221_ID)
return -EINVAL;
/* fall through */
case 500000:
case 900000:
val = (900000 - intval) / 400000;
return regmap_update_bits(power->regmap,
AXP20X_VBUS_IPSOUT_MGMT,
AXP20X_VBUS_CLIMIT_MASK, val);
default:
return -EINVAL;
}
return -EINVAL;
}
static int axp20x_usb_power_set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
{
struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
switch (psp) {
case POWER_SUPPLY_PROP_VOLTAGE_MIN:
return axp20x_usb_power_set_voltage_min(power, val->intval);
case POWER_SUPPLY_PROP_CURRENT_MAX:
if (power->axp20x_id == AXP813_ID)
return axp813_usb_power_set_current_max(power,
val->intval);
return axp20x_usb_power_set_current_max(power, val->intval);
default:
return -EINVAL;
}
return -EINVAL;
}
static int axp20x_usb_power_prop_writeable(struct power_supply *psy,
enum power_supply_property psp)
{
return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
psp == POWER_SUPPLY_PROP_CURRENT_MAX;
}
static enum power_supply_property axp20x_usb_power_properties[] = {
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_MIN,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_CURRENT_MAX,
POWER_SUPPLY_PROP_CURRENT_NOW,
};
static enum power_supply_property axp22x_usb_power_properties[] = {
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_MIN,
POWER_SUPPLY_PROP_CURRENT_MAX,
};
static const struct power_supply_desc axp20x_usb_power_desc = {
.name = "axp20x-usb",
.type = POWER_SUPPLY_TYPE_USB,
.properties = axp20x_usb_power_properties,
.num_properties = ARRAY_SIZE(axp20x_usb_power_properties),
.property_is_writeable = axp20x_usb_power_prop_writeable,
.get_property = axp20x_usb_power_get_property,
.set_property = axp20x_usb_power_set_property,
};
static const struct power_supply_desc axp22x_usb_power_desc = {
.name = "axp20x-usb",
.type = POWER_SUPPLY_TYPE_USB,
.properties = axp22x_usb_power_properties,
.num_properties = ARRAY_SIZE(axp22x_usb_power_properties),
.property_is_writeable = axp20x_usb_power_prop_writeable,
.get_property = axp20x_usb_power_get_property,
.set_property = axp20x_usb_power_set_property,
};
static int configure_iio_channels(struct platform_device *pdev,
struct axp20x_usb_power *power)
{
power->vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v");
if (IS_ERR(power->vbus_v)) {
if (PTR_ERR(power->vbus_v) == -ENODEV)
return -EPROBE_DEFER;
return PTR_ERR(power->vbus_v);
}
power->vbus_i = devm_iio_channel_get(&pdev->dev, "vbus_i");
if (IS_ERR(power->vbus_i)) {
if (PTR_ERR(power->vbus_i) == -ENODEV)
return -EPROBE_DEFER;
return PTR_ERR(power->vbus_i);
}
return 0;
}
static int configure_adc_registers(struct axp20x_usb_power *power)
{
/* Enable vbus voltage and current measurement */
return regmap_update_bits(power->regmap, AXP20X_ADC_EN1,
AXP20X_ADC_EN1_VBUS_CURR |
AXP20X_ADC_EN1_VBUS_VOLT,
AXP20X_ADC_EN1_VBUS_CURR |
AXP20X_ADC_EN1_VBUS_VOLT);
}
static int axp20x_usb_power_probe(struct platform_device *pdev)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
struct power_supply_config psy_cfg = {};
struct axp20x_usb_power *power;
static const char * const axp20x_irq_names[] = { "VBUS_PLUGIN",
"VBUS_REMOVAL", "VBUS_VALID", "VBUS_NOT_VALID", NULL };
static const char * const axp22x_irq_names[] = {
"VBUS_PLUGIN", "VBUS_REMOVAL", NULL };
const char * const *irq_names;
const struct power_supply_desc *usb_power_desc;
int i, irq, ret;
if (!of_device_is_available(pdev->dev.of_node))
return -ENODEV;
if (!axp20x) {
dev_err(&pdev->dev, "Parent drvdata not set\n");
return -EINVAL;
}
power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL);
if (!power)
return -ENOMEM;
platform_set_drvdata(pdev, power);
power->axp20x_id = (enum axp20x_variants)of_device_get_match_data(
&pdev->dev);
power->np = pdev->dev.of_node;
power->regmap = axp20x->regmap;
if (power->axp20x_id == AXP202_ID) {
/* Enable vbus valid checking */
ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON,
AXP20X_VBUS_MON_VBUS_VALID,
AXP20X_VBUS_MON_VBUS_VALID);
if (ret)
return ret;
if (IS_ENABLED(CONFIG_AXP20X_ADC))
ret = configure_iio_channels(pdev, power);
else
ret = configure_adc_registers(power);
if (ret)
return ret;
usb_power_desc = &axp20x_usb_power_desc;
irq_names = axp20x_irq_names;
} else if (power->axp20x_id == AXP221_ID ||
power->axp20x_id == AXP223_ID ||
power->axp20x_id == AXP813_ID) {
usb_power_desc = &axp22x_usb_power_desc;
irq_names = axp22x_irq_names;
} else {
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
axp20x->variant);
return -EINVAL;
}
psy_cfg.of_node = pdev->dev.of_node;
psy_cfg.drv_data = power;
power->supply = devm_power_supply_register(&pdev->dev, usb_power_desc,
&psy_cfg);
if (IS_ERR(power->supply))
return PTR_ERR(power->supply);
/* Request irqs after registering, as irqs may trigger immediately */
for (i = 0; irq_names[i]; i++) {
irq = platform_get_irq_byname(pdev, irq_names[i]);
if (irq < 0) {
dev_warn(&pdev->dev, "No IRQ for %s: %d\n",
irq_names[i], irq);
continue;
}
irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
ret = devm_request_any_context_irq(&pdev->dev, irq,
axp20x_usb_power_irq, 0, DRVNAME, power);
if (ret < 0)
dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n",
irq_names[i], ret);
}
INIT_DELAYED_WORK(&power->vbus_detect, axp20x_usb_power_poll_vbus);
if (axp20x_usb_vbus_needs_polling(power))
queue_delayed_work(system_wq, &power->vbus_detect, 0);
return 0;
}
static int axp20x_usb_power_remove(struct platform_device *pdev)
{
struct axp20x_usb_power *power = platform_get_drvdata(pdev);
cancel_delayed_work_sync(&power->vbus_detect);
return 0;
}
static const struct of_device_id axp20x_usb_power_match[] = {
{
.compatible = "x-powers,axp202-usb-power-supply",
.data = (void *)AXP202_ID,
}, {
.compatible = "x-powers,axp221-usb-power-supply",
.data = (void *)AXP221_ID,
}, {
.compatible = "x-powers,axp223-usb-power-supply",
.data = (void *)AXP223_ID,
}, {
.compatible = "x-powers,axp813-usb-power-supply",
.data = (void *)AXP813_ID,
}, { /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, axp20x_usb_power_match);
static struct platform_driver axp20x_usb_power_driver = {
.probe = axp20x_usb_power_probe,
.remove = axp20x_usb_power_remove,
.driver = {
.name = DRVNAME,
.of_match_table = axp20x_usb_power_match,
},
};
module_platform_driver(axp20x_usb_power_driver);
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_DESCRIPTION("AXP20x PMIC USB power supply status driver");
MODULE_LICENSE("GPL");