mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 18:11:56 +00:00
cb1a5bae56
If simulation needs predictable permanent mac addresses of hwsim wireless phy, this patch add the ability to create a new radio with a user defined permanent mac address. Allowed mac addresses needs to be locally administrated mac addresses (as also the former fixed 42:* and 02:* were). To do not break the operation with legacy software using hwsim, the new address is set twice. The problem here is, the netlink call backs use wiphy->addresses[1] as identification of a radio and not the proposed permanent address (wiphy->addresses[0]). This design decision is not documented in the kernel repo, therefore this patch simply reproduces this, but with the same address. Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de> [make pointer const] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
248 lines
9.0 KiB
C
248 lines
9.0 KiB
C
/*
|
|
* mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211
|
|
* Copyright (c) 2008, Jouni Malinen <j@w1.fi>
|
|
* Copyright (c) 2011, Javier Lopez <jlopex@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef __MAC80211_HWSIM_H
|
|
#define __MAC80211_HWSIM_H
|
|
|
|
/**
|
|
* enum hwsim_tx_control_flags - flags to describe transmission info/status
|
|
*
|
|
* These flags are used to give the wmediumd extra information in order to
|
|
* modify its behavior for each frame
|
|
*
|
|
* @HWSIM_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame.
|
|
* @HWSIM_TX_CTL_NO_ACK: tell the wmediumd not to wait for an ack
|
|
* @HWSIM_TX_STAT_ACK: Frame was acknowledged
|
|
*
|
|
*/
|
|
enum hwsim_tx_control_flags {
|
|
HWSIM_TX_CTL_REQ_TX_STATUS = BIT(0),
|
|
HWSIM_TX_CTL_NO_ACK = BIT(1),
|
|
HWSIM_TX_STAT_ACK = BIT(2),
|
|
};
|
|
|
|
/**
|
|
* DOC: Frame transmission/registration support
|
|
*
|
|
* Frame transmission and registration support exists to allow userspace
|
|
* entities such as wmediumd to receive and process all broadcasted
|
|
* frames from a mac80211_hwsim radio device.
|
|
*
|
|
* This allow user space applications to decide if the frame should be
|
|
* dropped or not and implement a wireless medium simulator at user space.
|
|
*
|
|
* Registration is done by sending a register message to the driver and
|
|
* will be automatically unregistered if the user application doesn't
|
|
* responds to sent frames.
|
|
* Once registered the user application has to take responsibility of
|
|
* broadcasting the frames to all listening mac80211_hwsim radio
|
|
* interfaces.
|
|
*
|
|
* For more technical details, see the corresponding command descriptions
|
|
* below.
|
|
*/
|
|
|
|
/**
|
|
* enum hwsim_commands - supported hwsim commands
|
|
*
|
|
* @HWSIM_CMD_UNSPEC: unspecified command to catch errors
|
|
*
|
|
* @HWSIM_CMD_REGISTER: request to register and received all broadcasted
|
|
* frames by any mac80211_hwsim radio device.
|
|
* @HWSIM_CMD_FRAME: send/receive a broadcasted frame from/to kernel/user
|
|
* space, uses:
|
|
* %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_ADDR_RECEIVER,
|
|
* %HWSIM_ATTR_FRAME, %HWSIM_ATTR_FLAGS, %HWSIM_ATTR_RX_RATE,
|
|
* %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE, %HWSIM_ATTR_FREQ (optional)
|
|
* @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to
|
|
* kernel, uses:
|
|
* %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FLAGS,
|
|
* %HWSIM_ATTR_TX_INFO, %WSIM_ATTR_TX_INFO_FLAGS,
|
|
* %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE
|
|
* @HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters,
|
|
* returns the radio ID (>= 0) or negative on errors, if successful
|
|
* then multicast the result, uses optional parameter:
|
|
* %HWSIM_ATTR_REG_STRICT_REG, %HWSIM_ATTR_SUPPORT_P2P_DEVICE,
|
|
* %HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE, %HWSIM_ATTR_CHANNELS,
|
|
* %HWSIM_ATTR_NO_VIF, %HWSIM_ATTR_RADIO_NAME, %HWSIM_ATTR_USE_CHANCTX,
|
|
* %HWSIM_ATTR_REG_HINT_ALPHA2, %HWSIM_ATTR_REG_CUSTOM_REG,
|
|
* %HWSIM_ATTR_PERM_ADDR
|
|
* @HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted
|
|
* @HWSIM_CMD_GET_RADIO: fetch information about existing radios, uses:
|
|
* %HWSIM_ATTR_RADIO_ID
|
|
* @__HWSIM_CMD_MAX: enum limit
|
|
*/
|
|
enum {
|
|
HWSIM_CMD_UNSPEC,
|
|
HWSIM_CMD_REGISTER,
|
|
HWSIM_CMD_FRAME,
|
|
HWSIM_CMD_TX_INFO_FRAME,
|
|
HWSIM_CMD_NEW_RADIO,
|
|
HWSIM_CMD_DEL_RADIO,
|
|
HWSIM_CMD_GET_RADIO,
|
|
__HWSIM_CMD_MAX,
|
|
};
|
|
#define HWSIM_CMD_MAX (_HWSIM_CMD_MAX - 1)
|
|
|
|
#define HWSIM_CMD_CREATE_RADIO HWSIM_CMD_NEW_RADIO
|
|
#define HWSIM_CMD_DESTROY_RADIO HWSIM_CMD_DEL_RADIO
|
|
|
|
/**
|
|
* enum hwsim_attrs - hwsim netlink attributes
|
|
*
|
|
* @HWSIM_ATTR_UNSPEC: unspecified attribute to catch errors
|
|
*
|
|
* @HWSIM_ATTR_ADDR_RECEIVER: MAC address of the radio device that
|
|
* the frame is broadcasted to
|
|
* @HWSIM_ATTR_ADDR_TRANSMITTER: MAC address of the radio device that
|
|
* the frame was broadcasted from
|
|
* @HWSIM_ATTR_FRAME: Data array
|
|
* @HWSIM_ATTR_FLAGS: mac80211 transmission flags, used to process
|
|
properly the frame at user space
|
|
* @HWSIM_ATTR_RX_RATE: estimated rx rate index for this frame at user
|
|
space
|
|
* @HWSIM_ATTR_SIGNAL: estimated RX signal for this frame at user
|
|
space
|
|
* @HWSIM_ATTR_TX_INFO: ieee80211_tx_rate array
|
|
* @HWSIM_ATTR_COOKIE: sk_buff cookie to identify the frame
|
|
* @HWSIM_ATTR_CHANNELS: u32 attribute used with the %HWSIM_CMD_CREATE_RADIO
|
|
* command giving the number of channels supported by the new radio
|
|
* @HWSIM_ATTR_RADIO_ID: u32 attribute used with %HWSIM_CMD_DESTROY_RADIO
|
|
* only to destroy a radio
|
|
* @HWSIM_ATTR_REG_HINT_ALPHA2: alpha2 for regulatoro driver hint
|
|
* (nla string, length 2)
|
|
* @HWSIM_ATTR_REG_CUSTOM_REG: custom regulatory domain index (u32 attribute)
|
|
* @HWSIM_ATTR_REG_STRICT_REG: request REGULATORY_STRICT_REG (flag attribute)
|
|
* @HWSIM_ATTR_SUPPORT_P2P_DEVICE: support P2P Device virtual interface (flag)
|
|
* @HWSIM_ATTR_USE_CHANCTX: used with the %HWSIM_CMD_CREATE_RADIO
|
|
* command to force use of channel contexts even when only a
|
|
* single channel is supported
|
|
* @HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE: used with the %HWSIM_CMD_CREATE_RADIO
|
|
* command to force radio removal when process that created the radio dies
|
|
* @HWSIM_ATTR_RADIO_NAME: Name of radio, e.g. phy666
|
|
* @HWSIM_ATTR_NO_VIF: Do not create vif (wlanX) when creating radio.
|
|
* @HWSIM_ATTR_FREQ: Frequency at which packet is transmitted or received.
|
|
* @HWSIM_ATTR_TX_INFO_FLAGS: additional flags for corresponding
|
|
* rates of %HWSIM_ATTR_TX_INFO
|
|
* @HWSIM_ATTR_PERM_ADDR: permanent mac address of new radio
|
|
* @__HWSIM_ATTR_MAX: enum limit
|
|
*/
|
|
|
|
|
|
enum {
|
|
HWSIM_ATTR_UNSPEC,
|
|
HWSIM_ATTR_ADDR_RECEIVER,
|
|
HWSIM_ATTR_ADDR_TRANSMITTER,
|
|
HWSIM_ATTR_FRAME,
|
|
HWSIM_ATTR_FLAGS,
|
|
HWSIM_ATTR_RX_RATE,
|
|
HWSIM_ATTR_SIGNAL,
|
|
HWSIM_ATTR_TX_INFO,
|
|
HWSIM_ATTR_COOKIE,
|
|
HWSIM_ATTR_CHANNELS,
|
|
HWSIM_ATTR_RADIO_ID,
|
|
HWSIM_ATTR_REG_HINT_ALPHA2,
|
|
HWSIM_ATTR_REG_CUSTOM_REG,
|
|
HWSIM_ATTR_REG_STRICT_REG,
|
|
HWSIM_ATTR_SUPPORT_P2P_DEVICE,
|
|
HWSIM_ATTR_USE_CHANCTX,
|
|
HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE,
|
|
HWSIM_ATTR_RADIO_NAME,
|
|
HWSIM_ATTR_NO_VIF,
|
|
HWSIM_ATTR_FREQ,
|
|
HWSIM_ATTR_PAD,
|
|
HWSIM_ATTR_TX_INFO_FLAGS,
|
|
HWSIM_ATTR_PERM_ADDR,
|
|
__HWSIM_ATTR_MAX,
|
|
};
|
|
#define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1)
|
|
|
|
/**
|
|
* struct hwsim_tx_rate - rate selection/status
|
|
*
|
|
* @idx: rate index to attempt to send with
|
|
* @count: number of tries in this rate before going to the next rate
|
|
*
|
|
* A value of -1 for @idx indicates an invalid rate and, if used
|
|
* in an array of retry rates, that no more rates should be tried.
|
|
*
|
|
* When used for transmit status reporting, the driver should
|
|
* always report the rate and number of retries used.
|
|
*
|
|
*/
|
|
struct hwsim_tx_rate {
|
|
s8 idx;
|
|
u8 count;
|
|
} __packed;
|
|
|
|
/**
|
|
* enum hwsim_tx_rate_flags - per-rate flags set by the rate control algorithm.
|
|
* Inspired by structure mac80211_rate_control_flags. New flags may be
|
|
* appended, but old flags not deleted, to keep compatibility for
|
|
* userspace.
|
|
*
|
|
* These flags are set by the Rate control algorithm for each rate during tx,
|
|
* in the @flags member of struct ieee80211_tx_rate.
|
|
*
|
|
* @MAC80211_HWSIM_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
|
|
* @MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
|
|
* This is set if the current BSS requires ERP protection.
|
|
* @MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
|
|
* @MAC80211_HWSIM_TX_RC_MCS: HT rate.
|
|
* @MAC80211_HWSIM_TX_RC_VHT_MCS: VHT MCS rate, in this case the idx field is
|
|
* split into a higher 4 bits (Nss) and lower 4 bits (MCS number)
|
|
* @MAC80211_HWSIM_TX_RC_GREEN_FIELD: Indicates whether this rate should be used
|
|
* in Greenfield mode.
|
|
* @MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be
|
|
* 40 MHz.
|
|
* @MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH: Indicates 80 MHz transmission
|
|
* @MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH: Indicates 160 MHz transmission
|
|
* (80+80 isn't supported yet)
|
|
* @MAC80211_HWSIM_TX_RC_DUP_DATA: The frame should be transmitted on both of
|
|
* the adjacent 20 MHz channels, if the current channel type is
|
|
* NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
|
|
* @MAC80211_HWSIM_TX_RC_SHORT_GI: Short Guard interval should be used for this
|
|
* rate.
|
|
*/
|
|
enum hwsim_tx_rate_flags {
|
|
MAC80211_HWSIM_TX_RC_USE_RTS_CTS = BIT(0),
|
|
MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT = BIT(1),
|
|
MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE = BIT(2),
|
|
|
|
/* rate index is an HT/VHT MCS instead of an index */
|
|
MAC80211_HWSIM_TX_RC_MCS = BIT(3),
|
|
MAC80211_HWSIM_TX_RC_GREEN_FIELD = BIT(4),
|
|
MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH = BIT(5),
|
|
MAC80211_HWSIM_TX_RC_DUP_DATA = BIT(6),
|
|
MAC80211_HWSIM_TX_RC_SHORT_GI = BIT(7),
|
|
MAC80211_HWSIM_TX_RC_VHT_MCS = BIT(8),
|
|
MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH = BIT(9),
|
|
MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH = BIT(10),
|
|
};
|
|
|
|
/**
|
|
* struct hwsim_tx_rate - rate selection/status
|
|
*
|
|
* @idx: rate index to attempt to send with
|
|
* @count: number of tries in this rate before going to the next rate
|
|
*
|
|
* A value of -1 for @idx indicates an invalid rate and, if used
|
|
* in an array of retry rates, that no more rates should be tried.
|
|
*
|
|
* When used for transmit status reporting, the driver should
|
|
* always report the rate and number of retries used.
|
|
*
|
|
*/
|
|
struct hwsim_tx_rate_flag {
|
|
s8 idx;
|
|
u16 flags;
|
|
} __packed;
|
|
#endif /* __MAC80211_HWSIM_H */
|