linux/mm/swap.c
yangge 33dfe9204f mm/gup: clear the LRU flag of a page before adding to LRU batch
If a large number of CMA memory are configured in system (for example,
the CMA memory accounts for 50% of the system memory), starting a
virtual virtual machine with device passthrough, it will call
pin_user_pages_remote(..., FOLL_LONGTERM, ...) to pin memory.  Normally
if a page is present and in CMA area, pin_user_pages_remote() will
migrate the page from CMA area to non-CMA area because of FOLL_LONGTERM
flag.  But the current code will cause the migration failure due to
unexpected page refcounts, and eventually cause the virtual machine
fail to start.

If a page is added in LRU batch, its refcount increases one, remove the
page from LRU batch decreases one.  Page migration requires the page is
not referenced by others except page mapping.  Before migrating a page,
we should try to drain the page from LRU batch in case the page is in
it, however, folio_test_lru() is not sufficient to tell whether the
page is in LRU batch or not, if the page is in LRU batch, the migration
will fail.

To solve the problem above, we modify the logic of adding to LRU batch.
Before adding a page to LRU batch, we clear the LRU flag of the page
so that we can check whether the page is in LRU batch by
folio_test_lru(page).  It's quite valuable, because likely we don't
want to blindly drain the LRU batch simply because there is some
unexpected reference on a page, as described above.

This change makes the LRU flag of a page invisible for longer, which
may impact some programs.  For example, as long as a page is on a LRU
batch, we cannot isolate it, and we cannot check if it's an LRU page. 
Further, a page can now only be on exactly one LRU batch.  This doesn't
seem to matter much, because a new page is allocated from buddy and
added to the lru batch, or be isolated, it's LRU flag may also be
invisible for a long time.

Link: https://lkml.kernel.org/r/1720075944-27201-1-git-send-email-yangge1116@126.com
Link: https://lkml.kernel.org/r/1720008153-16035-1-git-send-email-yangge1116@126.com
Fixes: 9a4e9f3b2d ("mm: update get_user_pages_longterm to migrate pages allocated from CMA region")
Signed-off-by: yangge <yangge1116@126.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-17 21:08:54 -07:00

1141 lines
32 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/mm/swap.c
*
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*/
/*
* This file contains the default values for the operation of the
* Linux VM subsystem. Fine-tuning documentation can be found in
* Documentation/admin-guide/sysctl/vm.rst.
* Started 18.12.91
* Swap aging added 23.2.95, Stephen Tweedie.
* Buffermem limits added 12.3.98, Rik van Riel.
*/
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <linux/swap.h>
#include <linux/mman.h>
#include <linux/pagemap.h>
#include <linux/pagevec.h>
#include <linux/init.h>
#include <linux/export.h>
#include <linux/mm_inline.h>
#include <linux/percpu_counter.h>
#include <linux/memremap.h>
#include <linux/percpu.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/backing-dev.h>
#include <linux/memcontrol.h>
#include <linux/gfp.h>
#include <linux/uio.h>
#include <linux/hugetlb.h>
#include <linux/page_idle.h>
#include <linux/local_lock.h>
#include <linux/buffer_head.h>
#include "internal.h"
#define CREATE_TRACE_POINTS
#include <trace/events/pagemap.h>
/* How many pages do we try to swap or page in/out together? As a power of 2 */
int page_cluster;
const int page_cluster_max = 31;
/* Protecting only lru_rotate.fbatch which requires disabling interrupts */
struct lru_rotate {
local_lock_t lock;
struct folio_batch fbatch;
};
static DEFINE_PER_CPU(struct lru_rotate, lru_rotate) = {
.lock = INIT_LOCAL_LOCK(lock),
};
/*
* The following folio batches are grouped together because they are protected
* by disabling preemption (and interrupts remain enabled).
*/
struct cpu_fbatches {
local_lock_t lock;
struct folio_batch lru_add;
struct folio_batch lru_deactivate_file;
struct folio_batch lru_deactivate;
struct folio_batch lru_lazyfree;
#ifdef CONFIG_SMP
struct folio_batch activate;
#endif
};
static DEFINE_PER_CPU(struct cpu_fbatches, cpu_fbatches) = {
.lock = INIT_LOCAL_LOCK(lock),
};
static void __page_cache_release(struct folio *folio, struct lruvec **lruvecp,
unsigned long *flagsp)
{
if (folio_test_lru(folio)) {
folio_lruvec_relock_irqsave(folio, lruvecp, flagsp);
lruvec_del_folio(*lruvecp, folio);
__folio_clear_lru_flags(folio);
}
/*
* In rare cases, when truncation or holepunching raced with
* munlock after VM_LOCKED was cleared, Mlocked may still be
* found set here. This does not indicate a problem, unless
* "unevictable_pgs_cleared" appears worryingly large.
*/
if (unlikely(folio_test_mlocked(folio))) {
long nr_pages = folio_nr_pages(folio);
__folio_clear_mlocked(folio);
zone_stat_mod_folio(folio, NR_MLOCK, -nr_pages);
count_vm_events(UNEVICTABLE_PGCLEARED, nr_pages);
}
}
/*
* This path almost never happens for VM activity - pages are normally freed
* in batches. But it gets used by networking - and for compound pages.
*/
static void page_cache_release(struct folio *folio)
{
struct lruvec *lruvec = NULL;
unsigned long flags;
__page_cache_release(folio, &lruvec, &flags);
if (lruvec)
unlock_page_lruvec_irqrestore(lruvec, flags);
}
void __folio_put(struct folio *folio)
{
if (unlikely(folio_is_zone_device(folio))) {
free_zone_device_folio(folio);
return;
} else if (folio_test_hugetlb(folio)) {
free_huge_folio(folio);
return;
}
page_cache_release(folio);
folio_undo_large_rmappable(folio);
mem_cgroup_uncharge(folio);
free_unref_page(&folio->page, folio_order(folio));
}
EXPORT_SYMBOL(__folio_put);
/**
* put_pages_list() - release a list of pages
* @pages: list of pages threaded on page->lru
*
* Release a list of pages which are strung together on page.lru.
*/
void put_pages_list(struct list_head *pages)
{
struct folio_batch fbatch;
struct folio *folio, *next;
folio_batch_init(&fbatch);
list_for_each_entry_safe(folio, next, pages, lru) {
if (!folio_put_testzero(folio))
continue;
if (folio_test_hugetlb(folio)) {
free_huge_folio(folio);
continue;
}
/* LRU flag must be clear because it's passed using the lru */
if (folio_batch_add(&fbatch, folio) > 0)
continue;
free_unref_folios(&fbatch);
}
if (fbatch.nr)
free_unref_folios(&fbatch);
INIT_LIST_HEAD(pages);
}
EXPORT_SYMBOL(put_pages_list);
typedef void (*move_fn_t)(struct lruvec *lruvec, struct folio *folio);
static void lru_add_fn(struct lruvec *lruvec, struct folio *folio)
{
int was_unevictable = folio_test_clear_unevictable(folio);
long nr_pages = folio_nr_pages(folio);
VM_BUG_ON_FOLIO(folio_test_lru(folio), folio);
/*
* Is an smp_mb__after_atomic() still required here, before
* folio_evictable() tests the mlocked flag, to rule out the possibility
* of stranding an evictable folio on an unevictable LRU? I think
* not, because __munlock_folio() only clears the mlocked flag
* while the LRU lock is held.
*
* (That is not true of __page_cache_release(), and not necessarily
* true of folios_put(): but those only clear the mlocked flag after
* folio_put_testzero() has excluded any other users of the folio.)
*/
if (folio_evictable(folio)) {
if (was_unevictable)
__count_vm_events(UNEVICTABLE_PGRESCUED, nr_pages);
} else {
folio_clear_active(folio);
folio_set_unevictable(folio);
/*
* folio->mlock_count = !!folio_test_mlocked(folio)?
* But that leaves __mlock_folio() in doubt whether another
* actor has already counted the mlock or not. Err on the
* safe side, underestimate, let page reclaim fix it, rather
* than leaving a page on the unevictable LRU indefinitely.
*/
folio->mlock_count = 0;
if (!was_unevictable)
__count_vm_events(UNEVICTABLE_PGCULLED, nr_pages);
}
lruvec_add_folio(lruvec, folio);
trace_mm_lru_insertion(folio);
}
static void folio_batch_move_lru(struct folio_batch *fbatch, move_fn_t move_fn)
{
int i;
struct lruvec *lruvec = NULL;
unsigned long flags = 0;
for (i = 0; i < folio_batch_count(fbatch); i++) {
struct folio *folio = fbatch->folios[i];
folio_lruvec_relock_irqsave(folio, &lruvec, &flags);
move_fn(lruvec, folio);
folio_set_lru(folio);
}
if (lruvec)
unlock_page_lruvec_irqrestore(lruvec, flags);
folios_put(fbatch);
}
static void folio_batch_add_and_move(struct folio_batch *fbatch,
struct folio *folio, move_fn_t move_fn)
{
if (folio_batch_add(fbatch, folio) && !folio_test_large(folio) &&
!lru_cache_disabled())
return;
folio_batch_move_lru(fbatch, move_fn);
}
static void lru_move_tail_fn(struct lruvec *lruvec, struct folio *folio)
{
if (!folio_test_unevictable(folio)) {
lruvec_del_folio(lruvec, folio);
folio_clear_active(folio);
lruvec_add_folio_tail(lruvec, folio);
__count_vm_events(PGROTATED, folio_nr_pages(folio));
}
}
/*
* Writeback is about to end against a folio which has been marked for
* immediate reclaim. If it still appears to be reclaimable, move it
* to the tail of the inactive list.
*
* folio_rotate_reclaimable() must disable IRQs, to prevent nasty races.
*/
void folio_rotate_reclaimable(struct folio *folio)
{
if (!folio_test_locked(folio) && !folio_test_dirty(folio) &&
!folio_test_unevictable(folio)) {
struct folio_batch *fbatch;
unsigned long flags;
folio_get(folio);
if (!folio_test_clear_lru(folio)) {
folio_put(folio);
return;
}
local_lock_irqsave(&lru_rotate.lock, flags);
fbatch = this_cpu_ptr(&lru_rotate.fbatch);
folio_batch_add_and_move(fbatch, folio, lru_move_tail_fn);
local_unlock_irqrestore(&lru_rotate.lock, flags);
}
}
void lru_note_cost(struct lruvec *lruvec, bool file,
unsigned int nr_io, unsigned int nr_rotated)
{
unsigned long cost;
/*
* Reflect the relative cost of incurring IO and spending CPU
* time on rotations. This doesn't attempt to make a precise
* comparison, it just says: if reloads are about comparable
* between the LRU lists, or rotations are overwhelmingly
* different between them, adjust scan balance for CPU work.
*/
cost = nr_io * SWAP_CLUSTER_MAX + nr_rotated;
do {
unsigned long lrusize;
/*
* Hold lruvec->lru_lock is safe here, since
* 1) The pinned lruvec in reclaim, or
* 2) From a pre-LRU page during refault (which also holds the
* rcu lock, so would be safe even if the page was on the LRU
* and could move simultaneously to a new lruvec).
*/
spin_lock_irq(&lruvec->lru_lock);
/* Record cost event */
if (file)
lruvec->file_cost += cost;
else
lruvec->anon_cost += cost;
/*
* Decay previous events
*
* Because workloads change over time (and to avoid
* overflow) we keep these statistics as a floating
* average, which ends up weighing recent refaults
* more than old ones.
*/
lrusize = lruvec_page_state(lruvec, NR_INACTIVE_ANON) +
lruvec_page_state(lruvec, NR_ACTIVE_ANON) +
lruvec_page_state(lruvec, NR_INACTIVE_FILE) +
lruvec_page_state(lruvec, NR_ACTIVE_FILE);
if (lruvec->file_cost + lruvec->anon_cost > lrusize / 4) {
lruvec->file_cost /= 2;
lruvec->anon_cost /= 2;
}
spin_unlock_irq(&lruvec->lru_lock);
} while ((lruvec = parent_lruvec(lruvec)));
}
void lru_note_cost_refault(struct folio *folio)
{
lru_note_cost(folio_lruvec(folio), folio_is_file_lru(folio),
folio_nr_pages(folio), 0);
}
static void folio_activate_fn(struct lruvec *lruvec, struct folio *folio)
{
if (!folio_test_active(folio) && !folio_test_unevictable(folio)) {
long nr_pages = folio_nr_pages(folio);
lruvec_del_folio(lruvec, folio);
folio_set_active(folio);
lruvec_add_folio(lruvec, folio);
trace_mm_lru_activate(folio);
__count_vm_events(PGACTIVATE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGACTIVATE,
nr_pages);
}
}
#ifdef CONFIG_SMP
static void folio_activate_drain(int cpu)
{
struct folio_batch *fbatch = &per_cpu(cpu_fbatches.activate, cpu);
if (folio_batch_count(fbatch))
folio_batch_move_lru(fbatch, folio_activate_fn);
}
void folio_activate(struct folio *folio)
{
if (!folio_test_active(folio) && !folio_test_unevictable(folio)) {
struct folio_batch *fbatch;
folio_get(folio);
if (!folio_test_clear_lru(folio)) {
folio_put(folio);
return;
}
local_lock(&cpu_fbatches.lock);
fbatch = this_cpu_ptr(&cpu_fbatches.activate);
folio_batch_add_and_move(fbatch, folio, folio_activate_fn);
local_unlock(&cpu_fbatches.lock);
}
}
#else
static inline void folio_activate_drain(int cpu)
{
}
void folio_activate(struct folio *folio)
{
struct lruvec *lruvec;
if (folio_test_clear_lru(folio)) {
lruvec = folio_lruvec_lock_irq(folio);
folio_activate_fn(lruvec, folio);
unlock_page_lruvec_irq(lruvec);
folio_set_lru(folio);
}
}
#endif
static void __lru_cache_activate_folio(struct folio *folio)
{
struct folio_batch *fbatch;
int i;
local_lock(&cpu_fbatches.lock);
fbatch = this_cpu_ptr(&cpu_fbatches.lru_add);
/*
* Search backwards on the optimistic assumption that the folio being
* activated has just been added to this batch. Note that only
* the local batch is examined as a !LRU folio could be in the
* process of being released, reclaimed, migrated or on a remote
* batch that is currently being drained. Furthermore, marking
* a remote batch's folio active potentially hits a race where
* a folio is marked active just after it is added to the inactive
* list causing accounting errors and BUG_ON checks to trigger.
*/
for (i = folio_batch_count(fbatch) - 1; i >= 0; i--) {
struct folio *batch_folio = fbatch->folios[i];
if (batch_folio == folio) {
folio_set_active(folio);
break;
}
}
local_unlock(&cpu_fbatches.lock);
}
#ifdef CONFIG_LRU_GEN
static void folio_inc_refs(struct folio *folio)
{
unsigned long new_flags, old_flags = READ_ONCE(folio->flags);
if (folio_test_unevictable(folio))
return;
if (!folio_test_referenced(folio)) {
folio_set_referenced(folio);
return;
}
if (!folio_test_workingset(folio)) {
folio_set_workingset(folio);
return;
}
/* see the comment on MAX_NR_TIERS */
do {
new_flags = old_flags & LRU_REFS_MASK;
if (new_flags == LRU_REFS_MASK)
break;
new_flags += BIT(LRU_REFS_PGOFF);
new_flags |= old_flags & ~LRU_REFS_MASK;
} while (!try_cmpxchg(&folio->flags, &old_flags, new_flags));
}
#else
static void folio_inc_refs(struct folio *folio)
{
}
#endif /* CONFIG_LRU_GEN */
/**
* folio_mark_accessed - Mark a folio as having seen activity.
* @folio: The folio to mark.
*
* This function will perform one of the following transitions:
*
* * inactive,unreferenced -> inactive,referenced
* * inactive,referenced -> active,unreferenced
* * active,unreferenced -> active,referenced
*
* When a newly allocated folio is not yet visible, so safe for non-atomic ops,
* __folio_set_referenced() may be substituted for folio_mark_accessed().
*/
void folio_mark_accessed(struct folio *folio)
{
if (lru_gen_enabled()) {
folio_inc_refs(folio);
return;
}
if (!folio_test_referenced(folio)) {
folio_set_referenced(folio);
} else if (folio_test_unevictable(folio)) {
/*
* Unevictable pages are on the "LRU_UNEVICTABLE" list. But,
* this list is never rotated or maintained, so marking an
* unevictable page accessed has no effect.
*/
} else if (!folio_test_active(folio)) {
/*
* If the folio is on the LRU, queue it for activation via
* cpu_fbatches.activate. Otherwise, assume the folio is in a
* folio_batch, mark it active and it'll be moved to the active
* LRU on the next drain.
*/
if (folio_test_lru(folio))
folio_activate(folio);
else
__lru_cache_activate_folio(folio);
folio_clear_referenced(folio);
workingset_activation(folio);
}
if (folio_test_idle(folio))
folio_clear_idle(folio);
}
EXPORT_SYMBOL(folio_mark_accessed);
/**
* folio_add_lru - Add a folio to an LRU list.
* @folio: The folio to be added to the LRU.
*
* Queue the folio for addition to the LRU. The decision on whether
* to add the page to the [in]active [file|anon] list is deferred until the
* folio_batch is drained. This gives a chance for the caller of folio_add_lru()
* have the folio added to the active list using folio_mark_accessed().
*/
void folio_add_lru(struct folio *folio)
{
struct folio_batch *fbatch;
VM_BUG_ON_FOLIO(folio_test_active(folio) &&
folio_test_unevictable(folio), folio);
VM_BUG_ON_FOLIO(folio_test_lru(folio), folio);
/* see the comment in lru_gen_add_folio() */
if (lru_gen_enabled() && !folio_test_unevictable(folio) &&
lru_gen_in_fault() && !(current->flags & PF_MEMALLOC))
folio_set_active(folio);
folio_get(folio);
local_lock(&cpu_fbatches.lock);
fbatch = this_cpu_ptr(&cpu_fbatches.lru_add);
folio_batch_add_and_move(fbatch, folio, lru_add_fn);
local_unlock(&cpu_fbatches.lock);
}
EXPORT_SYMBOL(folio_add_lru);
/**
* folio_add_lru_vma() - Add a folio to the appropate LRU list for this VMA.
* @folio: The folio to be added to the LRU.
* @vma: VMA in which the folio is mapped.
*
* If the VMA is mlocked, @folio is added to the unevictable list.
* Otherwise, it is treated the same way as folio_add_lru().
*/
void folio_add_lru_vma(struct folio *folio, struct vm_area_struct *vma)
{
VM_BUG_ON_FOLIO(folio_test_lru(folio), folio);
if (unlikely((vma->vm_flags & (VM_LOCKED | VM_SPECIAL)) == VM_LOCKED))
mlock_new_folio(folio);
else
folio_add_lru(folio);
}
/*
* If the folio cannot be invalidated, it is moved to the
* inactive list to speed up its reclaim. It is moved to the
* head of the list, rather than the tail, to give the flusher
* threads some time to write it out, as this is much more
* effective than the single-page writeout from reclaim.
*
* If the folio isn't mapped and dirty/writeback, the folio
* could be reclaimed asap using the reclaim flag.
*
* 1. active, mapped folio -> none
* 2. active, dirty/writeback folio -> inactive, head, reclaim
* 3. inactive, mapped folio -> none
* 4. inactive, dirty/writeback folio -> inactive, head, reclaim
* 5. inactive, clean -> inactive, tail
* 6. Others -> none
*
* In 4, it moves to the head of the inactive list so the folio is
* written out by flusher threads as this is much more efficient
* than the single-page writeout from reclaim.
*/
static void lru_deactivate_file_fn(struct lruvec *lruvec, struct folio *folio)
{
bool active = folio_test_active(folio);
long nr_pages = folio_nr_pages(folio);
if (folio_test_unevictable(folio))
return;
/* Some processes are using the folio */
if (folio_mapped(folio))
return;
lruvec_del_folio(lruvec, folio);
folio_clear_active(folio);
folio_clear_referenced(folio);
if (folio_test_writeback(folio) || folio_test_dirty(folio)) {
/*
* Setting the reclaim flag could race with
* folio_end_writeback() and confuse readahead. But the
* race window is _really_ small and it's not a critical
* problem.
*/
lruvec_add_folio(lruvec, folio);
folio_set_reclaim(folio);
} else {
/*
* The folio's writeback ended while it was in the batch.
* We move that folio to the tail of the inactive list.
*/
lruvec_add_folio_tail(lruvec, folio);
__count_vm_events(PGROTATED, nr_pages);
}
if (active) {
__count_vm_events(PGDEACTIVATE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGDEACTIVATE,
nr_pages);
}
}
static void lru_deactivate_fn(struct lruvec *lruvec, struct folio *folio)
{
if (!folio_test_unevictable(folio) && (folio_test_active(folio) || lru_gen_enabled())) {
long nr_pages = folio_nr_pages(folio);
lruvec_del_folio(lruvec, folio);
folio_clear_active(folio);
folio_clear_referenced(folio);
lruvec_add_folio(lruvec, folio);
__count_vm_events(PGDEACTIVATE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGDEACTIVATE,
nr_pages);
}
}
static void lru_lazyfree_fn(struct lruvec *lruvec, struct folio *folio)
{
if (folio_test_anon(folio) && folio_test_swapbacked(folio) &&
!folio_test_swapcache(folio) && !folio_test_unevictable(folio)) {
long nr_pages = folio_nr_pages(folio);
lruvec_del_folio(lruvec, folio);
folio_clear_active(folio);
folio_clear_referenced(folio);
/*
* Lazyfree folios are clean anonymous folios. They have
* the swapbacked flag cleared, to distinguish them from normal
* anonymous folios
*/
folio_clear_swapbacked(folio);
lruvec_add_folio(lruvec, folio);
__count_vm_events(PGLAZYFREE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGLAZYFREE,
nr_pages);
}
}
/*
* Drain pages out of the cpu's folio_batch.
* Either "cpu" is the current CPU, and preemption has already been
* disabled; or "cpu" is being hot-unplugged, and is already dead.
*/
void lru_add_drain_cpu(int cpu)
{
struct cpu_fbatches *fbatches = &per_cpu(cpu_fbatches, cpu);
struct folio_batch *fbatch = &fbatches->lru_add;
if (folio_batch_count(fbatch))
folio_batch_move_lru(fbatch, lru_add_fn);
fbatch = &per_cpu(lru_rotate.fbatch, cpu);
/* Disabling interrupts below acts as a compiler barrier. */
if (data_race(folio_batch_count(fbatch))) {
unsigned long flags;
/* No harm done if a racing interrupt already did this */
local_lock_irqsave(&lru_rotate.lock, flags);
folio_batch_move_lru(fbatch, lru_move_tail_fn);
local_unlock_irqrestore(&lru_rotate.lock, flags);
}
fbatch = &fbatches->lru_deactivate_file;
if (folio_batch_count(fbatch))
folio_batch_move_lru(fbatch, lru_deactivate_file_fn);
fbatch = &fbatches->lru_deactivate;
if (folio_batch_count(fbatch))
folio_batch_move_lru(fbatch, lru_deactivate_fn);
fbatch = &fbatches->lru_lazyfree;
if (folio_batch_count(fbatch))
folio_batch_move_lru(fbatch, lru_lazyfree_fn);
folio_activate_drain(cpu);
}
/**
* deactivate_file_folio() - Deactivate a file folio.
* @folio: Folio to deactivate.
*
* This function hints to the VM that @folio is a good reclaim candidate,
* for example if its invalidation fails due to the folio being dirty
* or under writeback.
*
* Context: Caller holds a reference on the folio.
*/
void deactivate_file_folio(struct folio *folio)
{
struct folio_batch *fbatch;
/* Deactivating an unevictable folio will not accelerate reclaim */
if (folio_test_unevictable(folio))
return;
folio_get(folio);
if (!folio_test_clear_lru(folio)) {
folio_put(folio);
return;
}
local_lock(&cpu_fbatches.lock);
fbatch = this_cpu_ptr(&cpu_fbatches.lru_deactivate_file);
folio_batch_add_and_move(fbatch, folio, lru_deactivate_file_fn);
local_unlock(&cpu_fbatches.lock);
}
/*
* folio_deactivate - deactivate a folio
* @folio: folio to deactivate
*
* folio_deactivate() moves @folio to the inactive list if @folio was on the
* active list and was not unevictable. This is done to accelerate the
* reclaim of @folio.
*/
void folio_deactivate(struct folio *folio)
{
if (!folio_test_unevictable(folio) && (folio_test_active(folio) ||
lru_gen_enabled())) {
struct folio_batch *fbatch;
folio_get(folio);
if (!folio_test_clear_lru(folio)) {
folio_put(folio);
return;
}
local_lock(&cpu_fbatches.lock);
fbatch = this_cpu_ptr(&cpu_fbatches.lru_deactivate);
folio_batch_add_and_move(fbatch, folio, lru_deactivate_fn);
local_unlock(&cpu_fbatches.lock);
}
}
/**
* folio_mark_lazyfree - make an anon folio lazyfree
* @folio: folio to deactivate
*
* folio_mark_lazyfree() moves @folio to the inactive file list.
* This is done to accelerate the reclaim of @folio.
*/
void folio_mark_lazyfree(struct folio *folio)
{
if (folio_test_anon(folio) && folio_test_swapbacked(folio) &&
!folio_test_swapcache(folio) && !folio_test_unevictable(folio)) {
struct folio_batch *fbatch;
folio_get(folio);
if (!folio_test_clear_lru(folio)) {
folio_put(folio);
return;
}
local_lock(&cpu_fbatches.lock);
fbatch = this_cpu_ptr(&cpu_fbatches.lru_lazyfree);
folio_batch_add_and_move(fbatch, folio, lru_lazyfree_fn);
local_unlock(&cpu_fbatches.lock);
}
}
void lru_add_drain(void)
{
local_lock(&cpu_fbatches.lock);
lru_add_drain_cpu(smp_processor_id());
local_unlock(&cpu_fbatches.lock);
mlock_drain_local();
}
/*
* It's called from per-cpu workqueue context in SMP case so
* lru_add_drain_cpu and invalidate_bh_lrus_cpu should run on
* the same cpu. It shouldn't be a problem in !SMP case since
* the core is only one and the locks will disable preemption.
*/
static void lru_add_and_bh_lrus_drain(void)
{
local_lock(&cpu_fbatches.lock);
lru_add_drain_cpu(smp_processor_id());
local_unlock(&cpu_fbatches.lock);
invalidate_bh_lrus_cpu();
mlock_drain_local();
}
void lru_add_drain_cpu_zone(struct zone *zone)
{
local_lock(&cpu_fbatches.lock);
lru_add_drain_cpu(smp_processor_id());
drain_local_pages(zone);
local_unlock(&cpu_fbatches.lock);
mlock_drain_local();
}
#ifdef CONFIG_SMP
static DEFINE_PER_CPU(struct work_struct, lru_add_drain_work);
static void lru_add_drain_per_cpu(struct work_struct *dummy)
{
lru_add_and_bh_lrus_drain();
}
static bool cpu_needs_drain(unsigned int cpu)
{
struct cpu_fbatches *fbatches = &per_cpu(cpu_fbatches, cpu);
/* Check these in order of likelihood that they're not zero */
return folio_batch_count(&fbatches->lru_add) ||
data_race(folio_batch_count(&per_cpu(lru_rotate.fbatch, cpu))) ||
folio_batch_count(&fbatches->lru_deactivate_file) ||
folio_batch_count(&fbatches->lru_deactivate) ||
folio_batch_count(&fbatches->lru_lazyfree) ||
folio_batch_count(&fbatches->activate) ||
need_mlock_drain(cpu) ||
has_bh_in_lru(cpu, NULL);
}
/*
* Doesn't need any cpu hotplug locking because we do rely on per-cpu
* kworkers being shut down before our page_alloc_cpu_dead callback is
* executed on the offlined cpu.
* Calling this function with cpu hotplug locks held can actually lead
* to obscure indirect dependencies via WQ context.
*/
static inline void __lru_add_drain_all(bool force_all_cpus)
{
/*
* lru_drain_gen - Global pages generation number
*
* (A) Definition: global lru_drain_gen = x implies that all generations
* 0 < n <= x are already *scheduled* for draining.
*
* This is an optimization for the highly-contended use case where a
* user space workload keeps constantly generating a flow of pages for
* each CPU.
*/
static unsigned int lru_drain_gen;
static struct cpumask has_work;
static DEFINE_MUTEX(lock);
unsigned cpu, this_gen;
/*
* Make sure nobody triggers this path before mm_percpu_wq is fully
* initialized.
*/
if (WARN_ON(!mm_percpu_wq))
return;
/*
* Guarantee folio_batch counter stores visible by this CPU
* are visible to other CPUs before loading the current drain
* generation.
*/
smp_mb();
/*
* (B) Locally cache global LRU draining generation number
*
* The read barrier ensures that the counter is loaded before the mutex
* is taken. It pairs with smp_mb() inside the mutex critical section
* at (D).
*/
this_gen = smp_load_acquire(&lru_drain_gen);
mutex_lock(&lock);
/*
* (C) Exit the draining operation if a newer generation, from another
* lru_add_drain_all(), was already scheduled for draining. Check (A).
*/
if (unlikely(this_gen != lru_drain_gen && !force_all_cpus))
goto done;
/*
* (D) Increment global generation number
*
* Pairs with smp_load_acquire() at (B), outside of the critical
* section. Use a full memory barrier to guarantee that the
* new global drain generation number is stored before loading
* folio_batch counters.
*
* This pairing must be done here, before the for_each_online_cpu loop
* below which drains the page vectors.
*
* Let x, y, and z represent some system CPU numbers, where x < y < z.
* Assume CPU #z is in the middle of the for_each_online_cpu loop
* below and has already reached CPU #y's per-cpu data. CPU #x comes
* along, adds some pages to its per-cpu vectors, then calls
* lru_add_drain_all().
*
* If the paired barrier is done at any later step, e.g. after the
* loop, CPU #x will just exit at (C) and miss flushing out all of its
* added pages.
*/
WRITE_ONCE(lru_drain_gen, lru_drain_gen + 1);
smp_mb();
cpumask_clear(&has_work);
for_each_online_cpu(cpu) {
struct work_struct *work = &per_cpu(lru_add_drain_work, cpu);
if (cpu_needs_drain(cpu)) {
INIT_WORK(work, lru_add_drain_per_cpu);
queue_work_on(cpu, mm_percpu_wq, work);
__cpumask_set_cpu(cpu, &has_work);
}
}
for_each_cpu(cpu, &has_work)
flush_work(&per_cpu(lru_add_drain_work, cpu));
done:
mutex_unlock(&lock);
}
void lru_add_drain_all(void)
{
__lru_add_drain_all(false);
}
#else
void lru_add_drain_all(void)
{
lru_add_drain();
}
#endif /* CONFIG_SMP */
atomic_t lru_disable_count = ATOMIC_INIT(0);
/*
* lru_cache_disable() needs to be called before we start compiling
* a list of pages to be migrated using isolate_lru_page().
* It drains pages on LRU cache and then disable on all cpus until
* lru_cache_enable is called.
*
* Must be paired with a call to lru_cache_enable().
*/
void lru_cache_disable(void)
{
atomic_inc(&lru_disable_count);
/*
* Readers of lru_disable_count are protected by either disabling
* preemption or rcu_read_lock:
*
* preempt_disable, local_irq_disable [bh_lru_lock()]
* rcu_read_lock [rt_spin_lock CONFIG_PREEMPT_RT]
* preempt_disable [local_lock !CONFIG_PREEMPT_RT]
*
* Since v5.1 kernel, synchronize_rcu() is guaranteed to wait on
* preempt_disable() regions of code. So any CPU which sees
* lru_disable_count = 0 will have exited the critical
* section when synchronize_rcu() returns.
*/
synchronize_rcu_expedited();
#ifdef CONFIG_SMP
__lru_add_drain_all(true);
#else
lru_add_and_bh_lrus_drain();
#endif
}
/**
* folios_put_refs - Reduce the reference count on a batch of folios.
* @folios: The folios.
* @refs: The number of refs to subtract from each folio.
*
* Like folio_put(), but for a batch of folios. This is more efficient
* than writing the loop yourself as it will optimise the locks which need
* to be taken if the folios are freed. The folios batch is returned
* empty and ready to be reused for another batch; there is no need
* to reinitialise it. If @refs is NULL, we subtract one from each
* folio refcount.
*
* Context: May be called in process or interrupt context, but not in NMI
* context. May be called while holding a spinlock.
*/
void folios_put_refs(struct folio_batch *folios, unsigned int *refs)
{
int i, j;
struct lruvec *lruvec = NULL;
unsigned long flags = 0;
for (i = 0, j = 0; i < folios->nr; i++) {
struct folio *folio = folios->folios[i];
unsigned int nr_refs = refs ? refs[i] : 1;
if (is_huge_zero_folio(folio))
continue;
if (folio_is_zone_device(folio)) {
if (lruvec) {
unlock_page_lruvec_irqrestore(lruvec, flags);
lruvec = NULL;
}
if (put_devmap_managed_folio_refs(folio, nr_refs))
continue;
if (folio_ref_sub_and_test(folio, nr_refs))
free_zone_device_folio(folio);
continue;
}
if (!folio_ref_sub_and_test(folio, nr_refs))
continue;
/* hugetlb has its own memcg */
if (folio_test_hugetlb(folio)) {
if (lruvec) {
unlock_page_lruvec_irqrestore(lruvec, flags);
lruvec = NULL;
}
free_huge_folio(folio);
continue;
}
folio_undo_large_rmappable(folio);
__page_cache_release(folio, &lruvec, &flags);
if (j != i)
folios->folios[j] = folio;
j++;
}
if (lruvec)
unlock_page_lruvec_irqrestore(lruvec, flags);
if (!j) {
folio_batch_reinit(folios);
return;
}
folios->nr = j;
mem_cgroup_uncharge_folios(folios);
free_unref_folios(folios);
}
EXPORT_SYMBOL(folios_put_refs);
/**
* release_pages - batched put_page()
* @arg: array of pages to release
* @nr: number of pages
*
* Decrement the reference count on all the pages in @arg. If it
* fell to zero, remove the page from the LRU and free it.
*
* Note that the argument can be an array of pages, encoded pages,
* or folio pointers. We ignore any encoded bits, and turn any of
* them into just a folio that gets free'd.
*/
void release_pages(release_pages_arg arg, int nr)
{
struct folio_batch fbatch;
int refs[PAGEVEC_SIZE];
struct encoded_page **encoded = arg.encoded_pages;
int i;
folio_batch_init(&fbatch);
for (i = 0; i < nr; i++) {
/* Turn any of the argument types into a folio */
struct folio *folio = page_folio(encoded_page_ptr(encoded[i]));
/* Is our next entry actually "nr_pages" -> "nr_refs" ? */
refs[fbatch.nr] = 1;
if (unlikely(encoded_page_flags(encoded[i]) &
ENCODED_PAGE_BIT_NR_PAGES_NEXT))
refs[fbatch.nr] = encoded_nr_pages(encoded[++i]);
if (folio_batch_add(&fbatch, folio) > 0)
continue;
folios_put_refs(&fbatch, refs);
}
if (fbatch.nr)
folios_put_refs(&fbatch, refs);
}
EXPORT_SYMBOL(release_pages);
/*
* The folios which we're about to release may be in the deferred lru-addition
* queues. That would prevent them from really being freed right now. That's
* OK from a correctness point of view but is inefficient - those folios may be
* cache-warm and we want to give them back to the page allocator ASAP.
*
* So __folio_batch_release() will drain those queues here.
* folio_batch_move_lru() calls folios_put() directly to avoid
* mutual recursion.
*/
void __folio_batch_release(struct folio_batch *fbatch)
{
if (!fbatch->percpu_pvec_drained) {
lru_add_drain();
fbatch->percpu_pvec_drained = true;
}
folios_put(fbatch);
}
EXPORT_SYMBOL(__folio_batch_release);
/**
* folio_batch_remove_exceptionals() - Prune non-folios from a batch.
* @fbatch: The batch to prune
*
* find_get_entries() fills a batch with both folios and shadow/swap/DAX
* entries. This function prunes all the non-folio entries from @fbatch
* without leaving holes, so that it can be passed on to folio-only batch
* operations.
*/
void folio_batch_remove_exceptionals(struct folio_batch *fbatch)
{
unsigned int i, j;
for (i = 0, j = 0; i < folio_batch_count(fbatch); i++) {
struct folio *folio = fbatch->folios[i];
if (!xa_is_value(folio))
fbatch->folios[j++] = folio;
}
fbatch->nr = j;
}
/*
* Perform any setup for the swap system
*/
void __init swap_setup(void)
{
unsigned long megs = totalram_pages() >> (20 - PAGE_SHIFT);
/* Use a smaller cluster for small-memory machines */
if (megs < 16)
page_cluster = 2;
else
page_cluster = 3;
/*
* Right now other parts of the system means that we
* _really_ don't want to cluster much more
*/
}