mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 18:11:56 +00:00
07b75260eb
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.7. Here's the summary of
the changes:
- ATH79: Support for DTB passuing using the UHI boot protocol
- ATH79: Remove support for builtin DTB.
- ATH79: Add zboot debug serial support.
- ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
and DPT-Module.
- ATH79: Update devicetree clock support for AR9132 and AR9331.
- ATH79: Cleanup the DT code.
- ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
- ATH79: Fix regression in PCI window initialization.
- BCM47xx: Move SPROM driver to drivers/firmware/
- BCM63xx: Enable partition parser in defconfig.
- BMIPS: BMIPS5000 has I cache filing from D cache
- BMIPS: BMIPS: Add cpu-feature-overrides.h
- BMIPS: Add Whirlwind support
- BMIPS: Adjust mips-hpt-frequency for BCM7435
- BMIPS: Remove maxcpus from BCM97435SVMB DTS
- BMIPS: Add missing 7038 L1 register cells to BCM7435
- BMIPS: Various tweaks to initialization code.
- BMIPS: Enable partition parser in defconfig.
- BMIPS: Cache tweaks.
- BMIPS: Add UART, I2C and SATA devices to DT.
- BMIPS: Add BCM6358 and BCM63268support
- BMIPS: Add device tree example for BCM6358.
- BMIPS: Improve Improve BCM6328 and BCM6368 device trees
- Lantiq: Add support for device tree file from boot loader
- Lantiq: Allow build with no built-in DT.
- Loongson 3: Reserve 32MB for RS780E integrated GPU.
- Loongson 3: Fix build error after ld-version.sh modification
- Loongson 3: Move chipset ACPI code from drivers to arch.
- Loongson 3: Speedup irq processing.
- Loongson 3: Add basic Loongson 3A support.
- Loongson 3: Set cache flush handlers to nop.
- Loongson 3: Invalidate special TLBs when needed.
- Loongson 3: Fast TLB refill handler.
- MT7620: Fallback strategy for invalid syscfg0.
- Netlogic: Fix CP0_EBASE redefinition warnings
- Octeon: Initialization fixes
- Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
- Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
- Octeon: Correctly handle endian-swapped initramfs images.
- Octeon: Support CN73xx, CN75xx and CN78xx.
- Octeon: Remove dead code from cvmx-sysinfo.
- Octeon: Extend number of supported CPUs past 32.
- Octeon: Remove some code limiting NR_IRQS to 255.
- Octeon: Simplify octeon_irq_ciu_gpio_set_type.
- Octeon: Mark some functions __init in smp.c
- Octeon: Octeon: Add Octeon III CN7xxx interface detection
- PIC32: Add serial driver and bindings for it.
- PIC32: Add PIC32 deadman timer driver and bindings.
- PIC32: Add PIC32 clock timer driver and bindings.
- Pistachio: Determine SoC revision during boot
- Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
- Sibyte: Strip redundant comments from bcm1480_regs.h.
- Panic immediately if panic_on_oops is set.
- module: fix incorrect IS_ERR_VALUE macro usage.
- module: Make consistent use of pr_*
- Remove no longer needed work_on_cpu() call.
- Remove CONFIG_IPV6_PRIVACY from defconfigs.
- Fix registers of non-crashing CPUs in dumps.
- Handle MIPSisms in new vmcore_elf32_check_arch.
- Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
- Allow RIXI to be used on non-R2 or R6 cores.
- Reserve nosave data for hibernation
- Fix siginfo.h to use strict POSIX types.
- Don't unwind user mode with EVA.
- Fix watchpoint restoration
- Ptrace watchpoints for R6.
- Sync icache when it fills from dcache
- I6400 I-cache fills from dcache.
- Various MSA fixes.
- Cleanup MIPS_CPU_* definitions.
- Signal: Move generic copy_siginfo to signal.h
- Signal: Fix uapi include in exported asm/siginfo.h
- Timer fixes for sake of KVM.
- XPA TLB refill fixes.
- Treat perf counter feature
- Update John Crispin's email address
- Add PIC32 watchdog and bindings.
- Handle R10000 LL/SC bug in set_pte()
- cpufreq: Various fixes for Longson1.
- R6: Fix R2 emulation.
- mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
- ELF: ABI and FP fixes.
- Allow for relocatable kernel and use that to support KASLR.
- Fix CPC_BASE_ADDR mask
- Plenty fo smp-cps, CM, R6 and M6250 fixes.
- Make reset_control_ops const.
- Fix kernel command line handling of leading whitespace.
- Cleanups to cache handling.
- Add brcm, bcm6345-l1-intc device tree bindings.
- Use generic clkdev.h header
- Remove CLK_IS_ROOT usage.
- Misc small cleanups.
- CM: Fix compilation error when !MIPS_CM
- oprofile: Fix a preemption issue
- Detect DSP ASE v3 support:1"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
MIPS: pic32mzda: fix getting timer clock rate.
MIPS: ath79: fix regression in PCI window initialization
MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
MIPS: Fix VZ probe gas errors with binutils <2.24
MIPS: perf: Fix I6400 event numbers
MIPS: DEC: Export `ioasic_ssr_lock' to modules
MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
MIPS: CM: Fix compilation error when !MIPS_CM
MIPS: Fix genvdso error on rebuild
USB: ohci-jz4740: Remove obsolete driver
MIPS: JZ4740: Probe OHCI platform device via DT
MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
MIPS: pistachio: Determine SoC revision during boot
MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
MIPS: Prevent "restoration" of MSA context in non-MSA kernels
MIPS: cevt-r4k: Dynamically calculate min_delta_ns
MIPS: malta-time: Take seconds into account
MIPS: malta-time: Start GIC count before syncing to RTC
MIPS: Force CPUs to lose FP context during mode switches
...
110 lines
5.1 KiB
Makefile
110 lines
5.1 KiB
Makefile
# CPUfreq core
|
|
obj-$(CONFIG_CPU_FREQ) += cpufreq.o freq_table.o
|
|
|
|
# CPUfreq stats
|
|
obj-$(CONFIG_CPU_FREQ_STAT) += cpufreq_stats.o
|
|
|
|
# CPUfreq governors
|
|
obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE) += cpufreq_performance.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET) += cpufreq_governor_attr_set.o
|
|
|
|
obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o
|
|
obj-$(CONFIG_CPUFREQ_DT_PLATDEV) += cpufreq-dt-platdev.o
|
|
|
|
##################################################################################
|
|
# x86 drivers.
|
|
# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
|
|
# K8 systems. This is still the case but acpi-cpufreq errors out so that
|
|
# powernow-k8 can load then. ACPI is preferred to all other hardware-specific drivers.
|
|
# speedstep-* is preferred over p4-clockmod.
|
|
|
|
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
|
|
obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
|
|
obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o
|
|
obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o
|
|
obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
|
|
obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
|
|
obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o
|
|
obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o
|
|
obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o
|
|
obj-$(CONFIG_X86_LONGRUN) += longrun.o
|
|
obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
|
|
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
|
|
obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
|
|
obj-$(CONFIG_X86_INTEL_PSTATE) += intel_pstate.o
|
|
obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY) += amd_freq_sensitivity.o
|
|
obj-$(CONFIG_X86_SFI_CPUFREQ) += sfi-cpufreq.o
|
|
|
|
##################################################################################
|
|
# ARM SoC drivers
|
|
obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o
|
|
# big LITTLE per platform glues. Keep DT_BL_CPUFREQ as the last entry in all big
|
|
# LITTLE drivers, so that it is probed last.
|
|
obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
|
|
|
|
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
|
|
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
|
|
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
|
|
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
|
|
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
|
|
obj-$(CONFIG_ARM_INTEGRATOR) += integrator-cpufreq.o
|
|
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
|
|
obj-$(CONFIG_ARM_MT8173_CPUFREQ) += mt8173-cpufreq.o
|
|
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
|
|
obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
|
|
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
|
|
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
|
|
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
|
|
obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
|
|
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
|
|
obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o
|
|
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
|
|
obj-$(CONFIG_ARM_STI_CPUFREQ) += sti-cpufreq.o
|
|
obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o
|
|
obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o
|
|
obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
|
|
obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
|
|
obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
|
|
|
|
|
|
##################################################################################
|
|
# PowerPC platform drivers
|
|
obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o
|
|
ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
|
|
obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o
|
|
obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o
|
|
obj-$(CONFIG_QORIQ_CPUFREQ) += qoriq-cpufreq.o
|
|
obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o
|
|
obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o
|
|
obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o
|
|
obj-$(CONFIG_POWERNV_CPUFREQ) += powernv-cpufreq.o
|
|
|
|
##################################################################################
|
|
# Other platform drivers
|
|
obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o
|
|
obj-$(CONFIG_BFIN_CPU_FREQ) += blackfin-cpufreq.o
|
|
obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o
|
|
obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
|
|
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
|
|
obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
|
|
obj-$(CONFIG_LOONGSON1_CPUFREQ) += loongson1-cpufreq.o
|
|
obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
|
|
obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o
|
|
obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o
|
|
obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o
|