Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-18 18:11:56 +00:00
Code Issues Packages Projects Releases Wiki Activity
825773609c
linux/drivers/cpufreq/Kconfig
Rafael J. Wysocki 1aefc75b24 cpufreq: stats: Make the stats code non-modular 
The modularity of cpufreq_stats is quite problematic.

First off, the usage of policy notifiers for the initialization
and cleanup in the cpufreq_stats module is inherently racy with
respect to CPU offline/online and the initialization and cleanup
of the cpufreq driver.

Second, fast frequency switching (used by the schedutil governor)
cannot be enabled if any transition notifiers are registered, so
if the cpufreq_stats module (that registers a transition notifier
for updating transition statistics) is loaded, the schedutil governor
cannot use fast frequency switching.

On the other hand, allowing cpufreq_stats to be built as a module
doesn't really add much value.  Arguably, there's not much reason
for that code to be modular at all.

For the above reasons, make the cpufreq stats code non-modular,
modify the core to invoke functions provided by that code directly
and drop the notifiers from it.

Make the stats sysfs attributes appear empty if fast frequency
switching is enabled as the statistics will not be updated in that
case anyway (and returning -EBUSY from those attributes breaks
powertop).

While at it, clean up Kconfig help for the CPU_FREQ_STAT and
CPU_FREQ_STAT_DETAILS options.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2016-06-02 23:24:41 +02:00

348 lines
10 KiB
Plaintext
Raw Blame History

menu "CPU Frequency scaling"
config CPU_FREQ
bool "CPU Frequency scaling"
select SRCU
help
CPU Frequency scaling allows you to change the clock speed of
CPUs on the fly. This is a nice method to save power, because
the lower the CPU clock speed, the less power the CPU consumes.
Note that this driver doesn't automatically change the CPU
clock speed, you need to either enable a dynamic cpufreq governor
(see below) after boot, or use a userspace tool.
For details, take a look at <file:Documentation/cpu-freq>.
If in doubt, say N.
if CPU_FREQ
config CPU_FREQ_GOV_ATTR_SET
bool
config CPU_FREQ_GOV_COMMON
select CPU_FREQ_GOV_ATTR_SET
select IRQ_WORK
bool
config CPU_FREQ_BOOST_SW
bool
depends on THERMAL
config CPU_FREQ_STAT
bool "CPU frequency transition statistics"
default y
help
Export CPU frequency statistics information through sysfs.
If in doubt, say N.
config CPU_FREQ_STAT_DETAILS
bool "CPU frequency transition statistics details"
depends on CPU_FREQ_STAT
help
Show detailed CPU frequency transition table in sysfs.
If in doubt, say N.
choice
prompt "Default CPUFreq governor"
default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ
default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
help
This option sets which CPUFreq governor shall be loaded at
startup. If in doubt, select 'performance'.
config CPU_FREQ_DEFAULT_GOV_PERFORMANCE
bool "performance"
select CPU_FREQ_GOV_PERFORMANCE
help
Use the CPUFreq governor 'performance' as default. This sets
the frequency statically to the highest frequency supported by
the CPU.
config CPU_FREQ_DEFAULT_GOV_POWERSAVE
bool "powersave"
select CPU_FREQ_GOV_POWERSAVE
help
Use the CPUFreq governor 'powersave' as default. This sets
the frequency statically to the lowest frequency supported by
the CPU.
config CPU_FREQ_DEFAULT_GOV_USERSPACE
bool "userspace"
select CPU_FREQ_GOV_USERSPACE
help
Use the CPUFreq governor 'userspace' as default. This allows
you to set the CPU frequency manually or when a userspace
program shall be able to set the CPU dynamically without having
to enable the userspace governor manually.
config CPU_FREQ_DEFAULT_GOV_ONDEMAND
bool "ondemand"
select CPU_FREQ_GOV_ONDEMAND
select CPU_FREQ_GOV_PERFORMANCE
help
Use the CPUFreq governor 'ondemand' as default. This allows
you to get a full dynamic frequency capable system by simply
loading your cpufreq low-level hardware driver.
Be aware that not all cpufreq drivers support the ondemand
governor. If unsure have a look at the help section of the
driver. Fallback governor will be the performance governor.
config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
bool "conservative"
select CPU_FREQ_GOV_CONSERVATIVE
select CPU_FREQ_GOV_PERFORMANCE
help
Use the CPUFreq governor 'conservative' as default. This allows
you to get a full dynamic frequency capable system by simply
loading your cpufreq low-level hardware driver.
Be aware that not all cpufreq drivers support the conservative
governor. If unsure have a look at the help section of the
driver. Fallback governor will be the performance governor.
config CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
bool "schedutil"
depends on SMP
select CPU_FREQ_GOV_SCHEDUTIL
select CPU_FREQ_GOV_PERFORMANCE
help
Use the 'schedutil' CPUFreq governor by default. If unsure,
have a look at the help section of that governor. The fallback
governor will be 'performance'.
endchoice
config CPU_FREQ_GOV_PERFORMANCE
tristate "'performance' governor"
help
This cpufreq governor sets the frequency statically to the
highest available CPU frequency.
To compile this driver as a module, choose M here: the
module will be called cpufreq_performance.
If in doubt, say Y.
config CPU_FREQ_GOV_POWERSAVE
tristate "'powersave' governor"
help
This cpufreq governor sets the frequency statically to the
lowest available CPU frequency.
To compile this driver as a module, choose M here: the
module will be called cpufreq_powersave.
If in doubt, say Y.
config CPU_FREQ_GOV_USERSPACE
tristate "'userspace' governor for userspace frequency scaling"
help
Enable this cpufreq governor when you either want to set the
CPU frequency manually or when a userspace program shall
be able to set the CPU dynamically, like on LART
<http://www.lartmaker.nl/>.
To compile this driver as a module, choose M here: the
module will be called cpufreq_userspace.
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say Y.
config CPU_FREQ_GOV_ONDEMAND
tristate "'ondemand' cpufreq policy governor"
select CPU_FREQ_GOV_COMMON
help
'ondemand' - This driver adds a dynamic cpufreq policy governor.
The governor does a periodic polling and
changes frequency based on the CPU utilization.
The support for this governor depends on CPU capability to
do fast frequency switching (i.e, very low latency frequency
transitions).
To compile this driver as a module, choose M here: the
module will be called cpufreq_ondemand.
For details, take a look at linux/Documentation/cpu-freq.
If in doubt, say N.
config CPU_FREQ_GOV_CONSERVATIVE
tristate "'conservative' cpufreq governor"
depends on CPU_FREQ
select CPU_FREQ_GOV_COMMON
help
'conservative' - this driver is rather similar to the 'ondemand'
governor both in its source code and its purpose, the difference is
its optimisation for better suitability in a battery powered
environment. The frequency is gracefully increased and decreased
rather than jumping to 100% when speed is required.
If you have a desktop machine then you should really be considering
the 'ondemand' governor instead, however if you are using a laptop,
PDA or even an AMD64 based computer (due to the unacceptable
step-by-step latency issues between the minimum and maximum frequency
transitions in the CPU) you will probably want to use this governor.
To compile this driver as a module, choose M here: the
module will be called cpufreq_conservative.
For details, take a look at linux/Documentation/cpu-freq.
If in doubt, say N.
config CPU_FREQ_GOV_SCHEDUTIL
tristate "'schedutil' cpufreq policy governor"
depends on CPU_FREQ && SMP
select CPU_FREQ_GOV_ATTR_SET
select IRQ_WORK
help
This governor makes decisions based on the utilization data provided
by the scheduler. It sets the CPU frequency to be proportional to
the utilization/capacity ratio coming from the scheduler. If the
utilization is frequency-invariant, the new frequency is also
proportional to the maximum available frequency. If that is not the
case, it is proportional to the current frequency of the CPU. The
frequency tipping point is at utilization/capacity equal to 80% in
both cases.
To compile this driver as a module, choose M here: the module will
be called cpufreq_schedutil.
If in doubt, say N.
comment "CPU frequency scaling drivers"
config CPUFREQ_DT
tristate "Generic DT based cpufreq driver"
depends on HAVE_CLK && OF
# if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
depends on !CPU_THERMAL || THERMAL
select CPUFREQ_DT_PLATDEV
select PM_OPP
help
This adds a generic DT based cpufreq driver for frequency management.
It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
systems which share clock and voltage across all CPUs.
If in doubt, say N.
config CPUFREQ_DT_PLATDEV
bool
help
This adds a generic DT based cpufreq platdev driver for frequency
management. This creates a 'cpufreq-dt' platform device, on the
supported platforms.
If in doubt, say N.
if X86
source "drivers/cpufreq/Kconfig.x86"
endif
if ARM || ARM64
source "drivers/cpufreq/Kconfig.arm"
endif
if PPC32 || PPC64
source "drivers/cpufreq/Kconfig.powerpc"
endif
if AVR32
config AVR32_AT32AP_CPUFREQ
bool "CPU frequency driver for AT32AP"
depends on PLATFORM_AT32AP
default n
help
This enables the CPU frequency driver for AT32AP processors.
If in doubt, say N.
endif
if IA64
config IA64_ACPI_CPUFREQ
tristate "ACPI Processor P-States driver"
depends on ACPI_PROCESSOR
help
This driver adds a CPUFreq driver which utilizes the ACPI
Processor Performance States.
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
endif
if MIPS
config LOONGSON2_CPUFREQ
tristate "Loongson2 CPUFreq Driver"
help
This option adds a CPUFreq driver for loongson processors which
support software configurable cpu frequency.
Loongson2F and it's successors support this feature.
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
config LOONGSON1_CPUFREQ
tristate "Loongson1 CPUFreq Driver"
help
This option adds a CPUFreq driver for loongson1 processors which
support software configurable cpu frequency.
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
endif
if SPARC64
config SPARC_US3_CPUFREQ
tristate "UltraSPARC-III CPU Frequency driver"
help
This adds the CPUFreq driver for UltraSPARC-III processors.
For details, take a look at <file:Documentation/cpu-freq>.
If in doubt, say N.
config SPARC_US2E_CPUFREQ
tristate "UltraSPARC-IIe CPU Frequency driver"
help
This adds the CPUFreq driver for UltraSPARC-IIe processors.
For details, take a look at <file:Documentation/cpu-freq>.
If in doubt, say N.
endif
if SUPERH
config SH_CPU_FREQ
tristate "SuperH CPU Frequency driver"
help
This adds the cpufreq driver for SuperH. Any CPU that supports
clock rate rounding through the clock framework can use this
driver. While it will make the kernel slightly larger, this is
harmless for CPUs that don't support rate rounding. The driver
will also generate a notice in the boot log before disabling
itself if the CPU in question is not capable of rate rounding.
For details, take a look at <file:Documentation/cpu-freq>.
If unsure, say N.
endif
config QORIQ_CPUFREQ
tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
depends on OF && COMMON_CLK && (PPC_E500MC || ARM)
depends on !CPU_THERMAL || THERMAL
select CLK_QORIQ
help
This adds the CPUFreq driver support for Freescale QorIQ SoCs
which are capable of changing the CPU's frequency dynamically.
endif
endmenu
Reference in New Issue View Git Blame Copy Permalink