Akinobu Mita 815bbc8746 iio: ti-adc0832: add triggered buffer support ... This adds triggered buffer support for the ti-adc0832 driver. Tested with ADC0831 and ADC0832 by using SYSFS trigger. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2016-10-23 19:34:25 +01:00
..
accel	staging:iio:accel:sca3000 Move out of staging.	2016-10-23 19:34:07 +01:00
adc	iio: ti-adc0832: add triggered buffer support	2016-10-23 19:34:25 +01:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio: add resource managed triggered buffer init helpers	2016-09-04 15:42:46 +01:00
chemical	Second set of iio new device support, features and cleanups for the 4.9 cycle.	2016-09-14 20:42:03 +02:00
common	Second set of iio new device support, features and cleanups for the 4.9 cycle.	2016-09-14 20:42:03 +02:00
counter	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
dac	iio: dac: mcp4725: add devicetree support	2016-10-23 19:34:24 +01:00
dummy	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio: common: ssp_sensors: gyro: constify iio_info structures	2016-09-18 11:59:51 +01:00
health	First round of IIO new device support, features and cleanups for the 4.8 cycle.	2016-06-09 09:15:58 -07:00
humidity	iio: humidity: hdc100x: add triggered buffer support for HDC100X	2016-10-23 19:34:25 +01:00
imu	iio: bmi160_core: Fix sparse warning due to incorrect type in assignment	2016-10-23 19:33:44 +01:00
light	iio: light: ltr501: claim direct mode during raw writes	2016-10-23 19:34:08 +01:00
magnetometer	iio: magnetometer: ak8974: small endianness fixes	2016-10-03 21:30:00 +01:00
orientation
potentiometer	iio: potentiometer: Fix typo in Kconfig	2016-07-03 12:40:01 +01:00
potentiostat	iio: potentiostat: add LMP91000 support	2016-09-27 20:33:03 +01:00
pressure	iio: pressure: mpl3115: claim direct mode during raw reads	2016-10-23 19:33:55 +01:00
proximity	Second set of iio new device support, features and cleanups for the 4.9 cycle.	2016-09-14 20:42:03 +02:00
temperature	iio: temperature: fix non static symbol warnings	2016-08-29 19:49:00 +01:00
trigger	iio:trigger: Experimental kthread tight loop trigger (thread only)	2016-06-03 13:18:44 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	iio: Use kmalloc_array() in iio_scan_mask_set()	2016-09-24 16:35:24 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio: Implement counter channel type and info constants	2016-10-01 17:06:02 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio:trigger: Add helper function to verify that a trigger belongs to the same device	2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: inkern: add iio_read_channel_offset helper	2016-09-27 20:33:02 +01:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00