mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
d03a7005d9
Remove 'IRQF_TRIGGER_FALLING' request which is not allowed on every interrupt controller (i.e. arm64 GIC). Replace flag by a request that depends on the actual device-tree setting. Link: https://lore.kernel.org/all/02a701da2717$48abf150$da03d3f0$@samsung.com/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311221355.yxYpTIw3-lkp@intel.com/ Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
626 lines
16 KiB
C
626 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* drivers/extcon/extcon-tusb320.c - TUSB320 extcon driver
|
|
*
|
|
* Copyright (C) 2020 National Instruments Corporation
|
|
* Author: Michael Auchter <michael.auchter@ni.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/extcon-provider.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/usb/typec.h>
|
|
#include <linux/usb/typec_altmode.h>
|
|
#include <linux/usb/role.h>
|
|
#include <linux/irq.h>
|
|
|
|
#define TUSB320_REG8 0x8
|
|
#define TUSB320_REG8_CURRENT_MODE_ADVERTISE GENMASK(7, 6)
|
|
#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB 0x0
|
|
#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A 0x1
|
|
#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A 0x2
|
|
#define TUSB320_REG8_CURRENT_MODE_DETECT GENMASK(5, 4)
|
|
#define TUSB320_REG8_CURRENT_MODE_DETECT_DEF 0x0
|
|
#define TUSB320_REG8_CURRENT_MODE_DETECT_MED 0x1
|
|
#define TUSB320_REG8_CURRENT_MODE_DETECT_ACC 0x2
|
|
#define TUSB320_REG8_CURRENT_MODE_DETECT_HI 0x3
|
|
#define TUSB320_REG8_ACCESSORY_CONNECTED GENMASK(3, 1)
|
|
#define TUSB320_REG8_ACCESSORY_CONNECTED_NONE 0x0
|
|
#define TUSB320_REG8_ACCESSORY_CONNECTED_AUDIO 0x4
|
|
#define TUSB320_REG8_ACCESSORY_CONNECTED_ACHRG 0x5
|
|
#define TUSB320_REG8_ACCESSORY_CONNECTED_DBGDFP 0x6
|
|
#define TUSB320_REG8_ACCESSORY_CONNECTED_DBGUFP 0x7
|
|
#define TUSB320_REG8_ACTIVE_CABLE_DETECTION BIT(0)
|
|
|
|
#define TUSB320_REG9 0x9
|
|
#define TUSB320_REG9_ATTACHED_STATE GENMASK(7, 6)
|
|
#define TUSB320_REG9_CABLE_DIRECTION BIT(5)
|
|
#define TUSB320_REG9_INTERRUPT_STATUS BIT(4)
|
|
|
|
#define TUSB320_REGA 0xa
|
|
#define TUSB320L_REGA_DISABLE_TERM BIT(0)
|
|
#define TUSB320_REGA_I2C_SOFT_RESET BIT(3)
|
|
#define TUSB320_REGA_MODE_SELECT_SHIFT 4
|
|
#define TUSB320_REGA_MODE_SELECT_MASK 0x3
|
|
|
|
#define TUSB320L_REGA0_REVISION 0xa0
|
|
|
|
enum tusb320_attached_state {
|
|
TUSB320_ATTACHED_STATE_NONE,
|
|
TUSB320_ATTACHED_STATE_DFP,
|
|
TUSB320_ATTACHED_STATE_UFP,
|
|
TUSB320_ATTACHED_STATE_ACC,
|
|
};
|
|
|
|
enum tusb320_mode {
|
|
TUSB320_MODE_PORT,
|
|
TUSB320_MODE_UFP,
|
|
TUSB320_MODE_DFP,
|
|
TUSB320_MODE_DRP,
|
|
};
|
|
|
|
struct tusb320_priv;
|
|
|
|
struct tusb320_ops {
|
|
int (*set_mode)(struct tusb320_priv *priv, enum tusb320_mode mode);
|
|
int (*get_revision)(struct tusb320_priv *priv, unsigned int *revision);
|
|
};
|
|
|
|
struct tusb320_priv {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct extcon_dev *edev;
|
|
struct tusb320_ops *ops;
|
|
enum tusb320_attached_state state;
|
|
struct typec_port *port;
|
|
struct typec_capability cap;
|
|
enum typec_port_type port_type;
|
|
enum typec_pwr_opmode pwr_opmode;
|
|
struct fwnode_handle *connector_fwnode;
|
|
struct usb_role_switch *role_sw;
|
|
};
|
|
|
|
static const char * const tusb_attached_states[] = {
|
|
[TUSB320_ATTACHED_STATE_NONE] = "not attached",
|
|
[TUSB320_ATTACHED_STATE_DFP] = "downstream facing port",
|
|
[TUSB320_ATTACHED_STATE_UFP] = "upstream facing port",
|
|
[TUSB320_ATTACHED_STATE_ACC] = "accessory",
|
|
};
|
|
|
|
static const unsigned int tusb320_extcon_cable[] = {
|
|
EXTCON_USB,
|
|
EXTCON_USB_HOST,
|
|
EXTCON_NONE,
|
|
};
|
|
|
|
static int tusb320_check_signature(struct tusb320_priv *priv)
|
|
{
|
|
static const char sig[] = { '\0', 'T', 'U', 'S', 'B', '3', '2', '0' };
|
|
unsigned val;
|
|
int i, ret;
|
|
|
|
for (i = 0; i < sizeof(sig); i++) {
|
|
ret = regmap_read(priv->regmap, sizeof(sig) - 1 - i, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (val != sig[i]) {
|
|
dev_err(priv->dev, "signature mismatch!\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tusb320_set_mode(struct tusb320_priv *priv, enum tusb320_mode mode)
|
|
{
|
|
int ret;
|
|
|
|
/* Mode cannot be changed while cable is attached */
|
|
if (priv->state != TUSB320_ATTACHED_STATE_NONE)
|
|
return -EBUSY;
|
|
|
|
/* Write mode */
|
|
ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
|
|
TUSB320_REGA_MODE_SELECT_MASK << TUSB320_REGA_MODE_SELECT_SHIFT,
|
|
mode << TUSB320_REGA_MODE_SELECT_SHIFT);
|
|
if (ret) {
|
|
dev_err(priv->dev, "failed to write mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tusb320l_set_mode(struct tusb320_priv *priv, enum tusb320_mode mode)
|
|
{
|
|
int ret;
|
|
|
|
/* Disable CC state machine */
|
|
ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
|
|
TUSB320L_REGA_DISABLE_TERM, 1);
|
|
if (ret) {
|
|
dev_err(priv->dev,
|
|
"failed to disable CC state machine: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Write mode */
|
|
ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
|
|
TUSB320_REGA_MODE_SELECT_MASK << TUSB320_REGA_MODE_SELECT_SHIFT,
|
|
mode << TUSB320_REGA_MODE_SELECT_SHIFT);
|
|
if (ret) {
|
|
dev_err(priv->dev, "failed to write mode: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
msleep(5);
|
|
err:
|
|
/* Re-enable CC state machine */
|
|
ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
|
|
TUSB320L_REGA_DISABLE_TERM, 0);
|
|
if (ret)
|
|
dev_err(priv->dev,
|
|
"failed to re-enable CC state machine: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tusb320_reset(struct tusb320_priv *priv)
|
|
{
|
|
int ret;
|
|
|
|
/* Set mode to default (follow PORT pin) */
|
|
ret = priv->ops->set_mode(priv, TUSB320_MODE_PORT);
|
|
if (ret && ret != -EBUSY) {
|
|
dev_err(priv->dev,
|
|
"failed to set mode to PORT: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Perform soft reset */
|
|
ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
|
|
TUSB320_REGA_I2C_SOFT_RESET, 1);
|
|
if (ret) {
|
|
dev_err(priv->dev,
|
|
"failed to write soft reset bit: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Wait for chip to go through reset */
|
|
msleep(95);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tusb320l_get_revision(struct tusb320_priv *priv, unsigned int *revision)
|
|
{
|
|
return regmap_read(priv->regmap, TUSB320L_REGA0_REVISION, revision);
|
|
}
|
|
|
|
static struct tusb320_ops tusb320_ops = {
|
|
.set_mode = tusb320_set_mode,
|
|
};
|
|
|
|
static struct tusb320_ops tusb320l_ops = {
|
|
.set_mode = tusb320l_set_mode,
|
|
.get_revision = tusb320l_get_revision,
|
|
};
|
|
|
|
static int tusb320_set_adv_pwr_mode(struct tusb320_priv *priv)
|
|
{
|
|
u8 mode;
|
|
|
|
if (priv->pwr_opmode == TYPEC_PWR_MODE_USB)
|
|
mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB;
|
|
else if (priv->pwr_opmode == TYPEC_PWR_MODE_1_5A)
|
|
mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A;
|
|
else if (priv->pwr_opmode == TYPEC_PWR_MODE_3_0A)
|
|
mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A;
|
|
else /* No other mode is supported. */
|
|
return -EINVAL;
|
|
|
|
return regmap_write_bits(priv->regmap, TUSB320_REG8,
|
|
TUSB320_REG8_CURRENT_MODE_ADVERTISE,
|
|
FIELD_PREP(TUSB320_REG8_CURRENT_MODE_ADVERTISE,
|
|
mode));
|
|
}
|
|
|
|
static int tusb320_port_type_set(struct typec_port *port,
|
|
enum typec_port_type type)
|
|
{
|
|
struct tusb320_priv *priv = typec_get_drvdata(port);
|
|
|
|
if (type == TYPEC_PORT_SRC)
|
|
return priv->ops->set_mode(priv, TUSB320_MODE_DFP);
|
|
else if (type == TYPEC_PORT_SNK)
|
|
return priv->ops->set_mode(priv, TUSB320_MODE_UFP);
|
|
else if (type == TYPEC_PORT_DRP)
|
|
return priv->ops->set_mode(priv, TUSB320_MODE_DRP);
|
|
else
|
|
return priv->ops->set_mode(priv, TUSB320_MODE_PORT);
|
|
}
|
|
|
|
static const struct typec_operations tusb320_typec_ops = {
|
|
.port_type_set = tusb320_port_type_set,
|
|
};
|
|
|
|
static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
|
|
{
|
|
int state, polarity;
|
|
|
|
state = FIELD_GET(TUSB320_REG9_ATTACHED_STATE, reg);
|
|
polarity = !!(reg & TUSB320_REG9_CABLE_DIRECTION);
|
|
|
|
dev_dbg(priv->dev, "attached state: %s, polarity: %d\n",
|
|
tusb_attached_states[state], polarity);
|
|
|
|
extcon_set_state(priv->edev, EXTCON_USB,
|
|
state == TUSB320_ATTACHED_STATE_UFP);
|
|
extcon_set_state(priv->edev, EXTCON_USB_HOST,
|
|
state == TUSB320_ATTACHED_STATE_DFP);
|
|
extcon_set_property(priv->edev, EXTCON_USB,
|
|
EXTCON_PROP_USB_TYPEC_POLARITY,
|
|
(union extcon_property_value)polarity);
|
|
extcon_set_property(priv->edev, EXTCON_USB_HOST,
|
|
EXTCON_PROP_USB_TYPEC_POLARITY,
|
|
(union extcon_property_value)polarity);
|
|
extcon_sync(priv->edev, EXTCON_USB);
|
|
extcon_sync(priv->edev, EXTCON_USB_HOST);
|
|
|
|
priv->state = state;
|
|
}
|
|
|
|
static void tusb320_typec_irq_handler(struct tusb320_priv *priv, u8 reg9)
|
|
{
|
|
struct typec_port *port = priv->port;
|
|
struct device *dev = priv->dev;
|
|
int typec_mode;
|
|
enum usb_role usb_role;
|
|
enum typec_role pwr_role;
|
|
enum typec_data_role data_role;
|
|
u8 state, mode, accessory;
|
|
int ret, reg8;
|
|
bool ori;
|
|
|
|
ret = regmap_read(priv->regmap, TUSB320_REG8, ®8);
|
|
if (ret) {
|
|
dev_err(dev, "error during reg8 i2c read, ret=%d!\n", ret);
|
|
return;
|
|
}
|
|
|
|
ori = reg9 & TUSB320_REG9_CABLE_DIRECTION;
|
|
typec_set_orientation(port, ori ? TYPEC_ORIENTATION_REVERSE :
|
|
TYPEC_ORIENTATION_NORMAL);
|
|
|
|
state = FIELD_GET(TUSB320_REG9_ATTACHED_STATE, reg9);
|
|
accessory = FIELD_GET(TUSB320_REG8_ACCESSORY_CONNECTED, reg8);
|
|
|
|
switch (state) {
|
|
case TUSB320_ATTACHED_STATE_DFP:
|
|
typec_mode = TYPEC_MODE_USB2;
|
|
usb_role = USB_ROLE_HOST;
|
|
pwr_role = TYPEC_SOURCE;
|
|
data_role = TYPEC_HOST;
|
|
break;
|
|
case TUSB320_ATTACHED_STATE_UFP:
|
|
typec_mode = TYPEC_MODE_USB2;
|
|
usb_role = USB_ROLE_DEVICE;
|
|
pwr_role = TYPEC_SINK;
|
|
data_role = TYPEC_DEVICE;
|
|
break;
|
|
case TUSB320_ATTACHED_STATE_ACC:
|
|
/*
|
|
* Accessory detected. For debug accessories, just make some
|
|
* qualified guesses as to the role for lack of a better option.
|
|
*/
|
|
if (accessory == TUSB320_REG8_ACCESSORY_CONNECTED_AUDIO ||
|
|
accessory == TUSB320_REG8_ACCESSORY_CONNECTED_ACHRG) {
|
|
typec_mode = TYPEC_MODE_AUDIO;
|
|
usb_role = USB_ROLE_NONE;
|
|
pwr_role = TYPEC_SINK;
|
|
data_role = TYPEC_DEVICE;
|
|
break;
|
|
} else if (accessory ==
|
|
TUSB320_REG8_ACCESSORY_CONNECTED_DBGDFP) {
|
|
typec_mode = TYPEC_MODE_DEBUG;
|
|
pwr_role = TYPEC_SOURCE;
|
|
usb_role = USB_ROLE_HOST;
|
|
data_role = TYPEC_HOST;
|
|
break;
|
|
} else if (accessory ==
|
|
TUSB320_REG8_ACCESSORY_CONNECTED_DBGUFP) {
|
|
typec_mode = TYPEC_MODE_DEBUG;
|
|
pwr_role = TYPEC_SINK;
|
|
usb_role = USB_ROLE_DEVICE;
|
|
data_role = TYPEC_DEVICE;
|
|
break;
|
|
}
|
|
|
|
dev_warn(priv->dev, "unexpected ACCESSORY_CONNECTED state %d\n",
|
|
accessory);
|
|
|
|
fallthrough;
|
|
default:
|
|
typec_mode = TYPEC_MODE_USB2;
|
|
usb_role = USB_ROLE_NONE;
|
|
pwr_role = TYPEC_SINK;
|
|
data_role = TYPEC_DEVICE;
|
|
break;
|
|
}
|
|
|
|
typec_set_vconn_role(port, pwr_role);
|
|
typec_set_pwr_role(port, pwr_role);
|
|
typec_set_data_role(port, data_role);
|
|
typec_set_mode(port, typec_mode);
|
|
usb_role_switch_set_role(priv->role_sw, usb_role);
|
|
|
|
mode = FIELD_GET(TUSB320_REG8_CURRENT_MODE_DETECT, reg8);
|
|
if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_DEF)
|
|
typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
|
|
else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_MED)
|
|
typec_set_pwr_opmode(port, TYPEC_PWR_MODE_1_5A);
|
|
else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_HI)
|
|
typec_set_pwr_opmode(port, TYPEC_PWR_MODE_3_0A);
|
|
else /* Charge through accessory */
|
|
typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
|
|
}
|
|
|
|
static irqreturn_t tusb320_state_update_handler(struct tusb320_priv *priv,
|
|
bool force_update)
|
|
{
|
|
unsigned int reg;
|
|
|
|
if (regmap_read(priv->regmap, TUSB320_REG9, ®)) {
|
|
dev_err(priv->dev, "error during i2c read!\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (!force_update && !(reg & TUSB320_REG9_INTERRUPT_STATUS))
|
|
return IRQ_NONE;
|
|
|
|
tusb320_extcon_irq_handler(priv, reg);
|
|
|
|
/*
|
|
* Type-C support is optional. Only call the Type-C handler if a
|
|
* port had been registered previously.
|
|
*/
|
|
if (priv->port)
|
|
tusb320_typec_irq_handler(priv, reg);
|
|
|
|
regmap_write(priv->regmap, TUSB320_REG9, reg);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct tusb320_priv *priv = dev_id;
|
|
|
|
return tusb320_state_update_handler(priv, false);
|
|
}
|
|
|
|
static const struct regmap_config tusb320_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
static int tusb320_extcon_probe(struct tusb320_priv *priv)
|
|
{
|
|
int ret;
|
|
|
|
priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable);
|
|
if (IS_ERR(priv->edev)) {
|
|
dev_err(priv->dev, "failed to allocate extcon device\n");
|
|
return PTR_ERR(priv->edev);
|
|
}
|
|
|
|
ret = devm_extcon_dev_register(priv->dev, priv->edev);
|
|
if (ret < 0) {
|
|
dev_err(priv->dev, "failed to register extcon device\n");
|
|
return ret;
|
|
}
|
|
|
|
extcon_set_property_capability(priv->edev, EXTCON_USB,
|
|
EXTCON_PROP_USB_TYPEC_POLARITY);
|
|
extcon_set_property_capability(priv->edev, EXTCON_USB_HOST,
|
|
EXTCON_PROP_USB_TYPEC_POLARITY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tusb320_typec_probe(struct i2c_client *client,
|
|
struct tusb320_priv *priv)
|
|
{
|
|
struct fwnode_handle *connector;
|
|
const char *cap_str;
|
|
int ret;
|
|
|
|
/* The Type-C connector is optional, for backward compatibility. */
|
|
connector = device_get_named_child_node(&client->dev, "connector");
|
|
if (!connector)
|
|
return 0;
|
|
|
|
/* Type-C connector found. */
|
|
ret = typec_get_fw_cap(&priv->cap, connector);
|
|
if (ret)
|
|
goto err_put;
|
|
|
|
priv->port_type = priv->cap.type;
|
|
|
|
/* This goes into register 0x8 field CURRENT_MODE_ADVERTISE */
|
|
ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str);
|
|
if (ret)
|
|
goto err_put;
|
|
|
|
ret = typec_find_pwr_opmode(cap_str);
|
|
if (ret < 0)
|
|
goto err_put;
|
|
|
|
priv->pwr_opmode = ret;
|
|
|
|
/* Initialize the hardware with the devicetree settings. */
|
|
ret = tusb320_set_adv_pwr_mode(priv);
|
|
if (ret)
|
|
goto err_put;
|
|
|
|
priv->cap.revision = USB_TYPEC_REV_1_1;
|
|
priv->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO;
|
|
priv->cap.accessory[1] = TYPEC_ACCESSORY_DEBUG;
|
|
priv->cap.orientation_aware = true;
|
|
priv->cap.driver_data = priv;
|
|
priv->cap.ops = &tusb320_typec_ops;
|
|
priv->cap.fwnode = connector;
|
|
|
|
priv->port = typec_register_port(&client->dev, &priv->cap);
|
|
if (IS_ERR(priv->port)) {
|
|
ret = PTR_ERR(priv->port);
|
|
goto err_put;
|
|
}
|
|
|
|
/* Find any optional USB role switch that needs reporting to */
|
|
priv->role_sw = fwnode_usb_role_switch_get(connector);
|
|
if (IS_ERR(priv->role_sw)) {
|
|
ret = PTR_ERR(priv->role_sw);
|
|
goto err_unreg;
|
|
}
|
|
|
|
priv->connector_fwnode = connector;
|
|
|
|
return 0;
|
|
|
|
err_unreg:
|
|
typec_unregister_port(priv->port);
|
|
|
|
err_put:
|
|
fwnode_handle_put(connector);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tusb320_typec_remove(struct tusb320_priv *priv)
|
|
{
|
|
usb_role_switch_put(priv->role_sw);
|
|
typec_unregister_port(priv->port);
|
|
fwnode_handle_put(priv->connector_fwnode);
|
|
}
|
|
|
|
static int tusb320_probe(struct i2c_client *client)
|
|
{
|
|
struct tusb320_priv *priv;
|
|
const void *match_data;
|
|
unsigned int revision;
|
|
int ret;
|
|
u32 irq_trigger_type = IRQF_TRIGGER_FALLING;
|
|
struct irq_data *irq_d;
|
|
|
|
priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->dev = &client->dev;
|
|
i2c_set_clientdata(client, priv);
|
|
|
|
priv->regmap = devm_regmap_init_i2c(client, &tusb320_regmap_config);
|
|
if (IS_ERR(priv->regmap))
|
|
return PTR_ERR(priv->regmap);
|
|
|
|
ret = tusb320_check_signature(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
match_data = device_get_match_data(&client->dev);
|
|
if (!match_data)
|
|
return -EINVAL;
|
|
|
|
priv->ops = (struct tusb320_ops*)match_data;
|
|
|
|
if (priv->ops->get_revision) {
|
|
ret = priv->ops->get_revision(priv, &revision);
|
|
if (ret)
|
|
dev_warn(priv->dev,
|
|
"failed to read revision register: %d\n", ret);
|
|
else
|
|
dev_info(priv->dev, "chip revision %d\n", revision);
|
|
}
|
|
|
|
ret = tusb320_extcon_probe(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tusb320_typec_probe(client, priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* update initial state */
|
|
tusb320_state_update_handler(priv, true);
|
|
|
|
/* Reset chip to its default state */
|
|
ret = tusb320_reset(priv);
|
|
if (ret)
|
|
dev_warn(priv->dev, "failed to reset chip: %d\n", ret);
|
|
else
|
|
/*
|
|
* State and polarity might change after a reset, so update
|
|
* them again and make sure the interrupt status bit is cleared.
|
|
*/
|
|
tusb320_state_update_handler(priv, true);
|
|
|
|
irq_d = irq_get_irq_data(client->irq);
|
|
if (irq_d)
|
|
irq_trigger_type = irqd_get_trigger_type(irq_d);
|
|
|
|
ret = devm_request_threaded_irq(priv->dev, client->irq, NULL,
|
|
tusb320_irq_handler,
|
|
IRQF_ONESHOT | irq_trigger_type,
|
|
client->name, priv);
|
|
if (ret)
|
|
tusb320_typec_remove(priv);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tusb320_remove(struct i2c_client *client)
|
|
{
|
|
struct tusb320_priv *priv = i2c_get_clientdata(client);
|
|
|
|
tusb320_typec_remove(priv);
|
|
}
|
|
|
|
static const struct of_device_id tusb320_extcon_dt_match[] = {
|
|
{ .compatible = "ti,tusb320", .data = &tusb320_ops, },
|
|
{ .compatible = "ti,tusb320l", .data = &tusb320l_ops, },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tusb320_extcon_dt_match);
|
|
|
|
static struct i2c_driver tusb320_extcon_driver = {
|
|
.probe = tusb320_probe,
|
|
.remove = tusb320_remove,
|
|
.driver = {
|
|
.name = "extcon-tusb320",
|
|
.of_match_table = tusb320_extcon_dt_match,
|
|
},
|
|
};
|
|
|
|
static int __init tusb320_init(void)
|
|
{
|
|
return i2c_add_driver(&tusb320_extcon_driver);
|
|
}
|
|
subsys_initcall(tusb320_init);
|
|
|
|
static void __exit tusb320_exit(void)
|
|
{
|
|
i2c_del_driver(&tusb320_extcon_driver);
|
|
}
|
|
module_exit(tusb320_exit);
|
|
|
|
MODULE_AUTHOR("Michael Auchter <michael.auchter@ni.com>");
|
|
MODULE_DESCRIPTION("TI TUSB320 extcon driver");
|
|
MODULE_LICENSE("GPL v2");
|