mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 08:02:07 +00:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
341 lines
13 KiB
Plaintext
341 lines
13 KiB
Plaintext
Using the initial RAM disk (initrd)
|
|
===================================
|
|
|
|
Written 1996,2000 by Werner Almesberger <werner.almesberger@epfl.ch> and
|
|
Hans Lermen <lermen@fgan.de>
|
|
|
|
|
|
initrd provides the capability to load a RAM disk by the boot loader.
|
|
This RAM disk can then be mounted as the root file system and programs
|
|
can be run from it. Afterwards, a new root file system can be mounted
|
|
from a different device. The previous root (from initrd) is then moved
|
|
to a directory and can be subsequently unmounted.
|
|
|
|
initrd is mainly designed to allow system startup to occur in two phases,
|
|
where the kernel comes up with a minimum set of compiled-in drivers, and
|
|
where additional modules are loaded from initrd.
|
|
|
|
This document gives a brief overview of the use of initrd. A more detailed
|
|
discussion of the boot process can be found in [1].
|
|
|
|
|
|
Operation
|
|
---------
|
|
|
|
When using initrd, the system typically boots as follows:
|
|
|
|
1) the boot loader loads the kernel and the initial RAM disk
|
|
2) the kernel converts initrd into a "normal" RAM disk and
|
|
frees the memory used by initrd
|
|
3) initrd is mounted read-write as root
|
|
4) /linuxrc is executed (this can be any valid executable, including
|
|
shell scripts; it is run with uid 0 and can do basically everything
|
|
init can do)
|
|
5) linuxrc mounts the "real" root file system
|
|
6) linuxrc places the root file system at the root directory using the
|
|
pivot_root system call
|
|
7) the usual boot sequence (e.g. invocation of /sbin/init) is performed
|
|
on the root file system
|
|
8) the initrd file system is removed
|
|
|
|
Note that changing the root directory does not involve unmounting it.
|
|
It is therefore possible to leave processes running on initrd during that
|
|
procedure. Also note that file systems mounted under initrd continue to
|
|
be accessible.
|
|
|
|
|
|
Boot command-line options
|
|
-------------------------
|
|
|
|
initrd adds the following new options:
|
|
|
|
initrd=<path> (e.g. LOADLIN)
|
|
|
|
Loads the specified file as the initial RAM disk. When using LILO, you
|
|
have to specify the RAM disk image file in /etc/lilo.conf, using the
|
|
INITRD configuration variable.
|
|
|
|
noinitrd
|
|
|
|
initrd data is preserved but it is not converted to a RAM disk and
|
|
the "normal" root file system is mounted. initrd data can be read
|
|
from /dev/initrd. Note that the data in initrd can have any structure
|
|
in this case and doesn't necessarily have to be a file system image.
|
|
This option is used mainly for debugging.
|
|
|
|
Note: /dev/initrd is read-only and it can only be used once. As soon
|
|
as the last process has closed it, all data is freed and /dev/initrd
|
|
can't be opened anymore.
|
|
|
|
root=/dev/ram0 (without devfs)
|
|
root=/dev/rd/0 (with devfs)
|
|
|
|
initrd is mounted as root, and the normal boot procedure is followed,
|
|
with the RAM disk still mounted as root.
|
|
|
|
|
|
Installation
|
|
------------
|
|
|
|
First, a directory for the initrd file system has to be created on the
|
|
"normal" root file system, e.g.
|
|
|
|
# mkdir /initrd
|
|
|
|
The name is not relevant. More details can be found on the pivot_root(2)
|
|
man page.
|
|
|
|
If the root file system is created during the boot procedure (i.e. if
|
|
you're building an install floppy), the root file system creation
|
|
procedure should create the /initrd directory.
|
|
|
|
If initrd will not be mounted in some cases, its content is still
|
|
accessible if the following device has been created (note that this
|
|
does not work if using devfs):
|
|
|
|
# mknod /dev/initrd b 1 250
|
|
# chmod 400 /dev/initrd
|
|
|
|
Second, the kernel has to be compiled with RAM disk support and with
|
|
support for the initial RAM disk enabled. Also, at least all components
|
|
needed to execute programs from initrd (e.g. executable format and file
|
|
system) must be compiled into the kernel.
|
|
|
|
Third, you have to create the RAM disk image. This is done by creating a
|
|
file system on a block device, copying files to it as needed, and then
|
|
copying the content of the block device to the initrd file. With recent
|
|
kernels, at least three types of devices are suitable for that:
|
|
|
|
- a floppy disk (works everywhere but it's painfully slow)
|
|
- a RAM disk (fast, but allocates physical memory)
|
|
- a loopback device (the most elegant solution)
|
|
|
|
We'll describe the loopback device method:
|
|
|
|
1) make sure loopback block devices are configured into the kernel
|
|
2) create an empty file system of the appropriate size, e.g.
|
|
# dd if=/dev/zero of=initrd bs=300k count=1
|
|
# mke2fs -F -m0 initrd
|
|
(if space is critical, you may want to use the Minix FS instead of Ext2)
|
|
3) mount the file system, e.g.
|
|
# mount -t ext2 -o loop initrd /mnt
|
|
4) create the console device (not necessary if using devfs, but it can't
|
|
hurt to do it anyway):
|
|
# mkdir /mnt/dev
|
|
# mknod /mnt/dev/console c 5 1
|
|
5) copy all the files that are needed to properly use the initrd
|
|
environment. Don't forget the most important file, /linuxrc
|
|
Note that /linuxrc's permissions must include "x" (execute).
|
|
6) correct operation the initrd environment can frequently be tested
|
|
even without rebooting with the command
|
|
# chroot /mnt /linuxrc
|
|
This is of course limited to initrds that do not interfere with the
|
|
general system state (e.g. by reconfiguring network interfaces,
|
|
overwriting mounted devices, trying to start already running demons,
|
|
etc. Note however that it is usually possible to use pivot_root in
|
|
such a chroot'ed initrd environment.)
|
|
7) unmount the file system
|
|
# umount /mnt
|
|
8) the initrd is now in the file "initrd". Optionally, it can now be
|
|
compressed
|
|
# gzip -9 initrd
|
|
|
|
For experimenting with initrd, you may want to take a rescue floppy and
|
|
only add a symbolic link from /linuxrc to /bin/sh. Alternatively, you
|
|
can try the experimental newlib environment [2] to create a small
|
|
initrd.
|
|
|
|
Finally, you have to boot the kernel and load initrd. Almost all Linux
|
|
boot loaders support initrd. Since the boot process is still compatible
|
|
with an older mechanism, the following boot command line parameters
|
|
have to be given:
|
|
|
|
root=/dev/ram0 init=/linuxrc rw
|
|
|
|
if not using devfs, or
|
|
|
|
root=/dev/rd/0 init=/linuxrc rw
|
|
|
|
if using devfs. (rw is only necessary if writing to the initrd file
|
|
system.)
|
|
|
|
With LOADLIN, you simply execute
|
|
|
|
LOADLIN <kernel> initrd=<disk_image>
|
|
e.g. LOADLIN C:\LINUX\BZIMAGE initrd=C:\LINUX\INITRD.GZ root=/dev/ram0
|
|
init=/linuxrc rw
|
|
|
|
With LILO, you add the option INITRD=<path> to either the global section
|
|
or to the section of the respective kernel in /etc/lilo.conf, and pass
|
|
the options using APPEND, e.g.
|
|
|
|
image = /bzImage
|
|
initrd = /boot/initrd.gz
|
|
append = "root=/dev/ram0 init=/linuxrc rw"
|
|
|
|
and run /sbin/lilo
|
|
|
|
For other boot loaders, please refer to the respective documentation.
|
|
|
|
Now you can boot and enjoy using initrd.
|
|
|
|
|
|
Changing the root device
|
|
------------------------
|
|
|
|
When finished with its duties, linuxrc typically changes the root device
|
|
and proceeds with starting the Linux system on the "real" root device.
|
|
|
|
The procedure involves the following steps:
|
|
- mounting the new root file system
|
|
- turning it into the root file system
|
|
- removing all accesses to the old (initrd) root file system
|
|
- unmounting the initrd file system and de-allocating the RAM disk
|
|
|
|
Mounting the new root file system is easy: it just needs to be mounted on
|
|
a directory under the current root. Example:
|
|
|
|
# mkdir /new-root
|
|
# mount -o ro /dev/hda1 /new-root
|
|
|
|
The root change is accomplished with the pivot_root system call, which
|
|
is also available via the pivot_root utility (see pivot_root(8) man
|
|
page; pivot_root is distributed with util-linux version 2.10h or higher
|
|
[3]). pivot_root moves the current root to a directory under the new
|
|
root, and puts the new root at its place. The directory for the old root
|
|
must exist before calling pivot_root. Example:
|
|
|
|
# cd /new-root
|
|
# mkdir initrd
|
|
# pivot_root . initrd
|
|
|
|
Now, the linuxrc process may still access the old root via its
|
|
executable, shared libraries, standard input/output/error, and its
|
|
current root directory. All these references are dropped by the
|
|
following command:
|
|
|
|
# exec chroot . what-follows <dev/console >dev/console 2>&1
|
|
|
|
Where what-follows is a program under the new root, e.g. /sbin/init
|
|
If the new root file system will be used with devfs and has no valid
|
|
/dev directory, devfs must be mounted before invoking chroot in order to
|
|
provide /dev/console.
|
|
|
|
Note: implementation details of pivot_root may change with time. In order
|
|
to ensure compatibility, the following points should be observed:
|
|
|
|
- before calling pivot_root, the current directory of the invoking
|
|
process should point to the new root directory
|
|
- use . as the first argument, and the _relative_ path of the directory
|
|
for the old root as the second argument
|
|
- a chroot program must be available under the old and the new root
|
|
- chroot to the new root afterwards
|
|
- use relative paths for dev/console in the exec command
|
|
|
|
Now, the initrd can be unmounted and the memory allocated by the RAM
|
|
disk can be freed:
|
|
|
|
# umount /initrd
|
|
# blockdev --flushbufs /dev/ram0 # /dev/rd/0 if using devfs
|
|
|
|
It is also possible to use initrd with an NFS-mounted root, see the
|
|
pivot_root(8) man page for details.
|
|
|
|
Note: if linuxrc or any program exec'ed from it terminates for some
|
|
reason, the old change_root mechanism is invoked (see section "Obsolete
|
|
root change mechanism").
|
|
|
|
|
|
Usage scenarios
|
|
---------------
|
|
|
|
The main motivation for implementing initrd was to allow for modular
|
|
kernel configuration at system installation. The procedure would work
|
|
as follows:
|
|
|
|
1) system boots from floppy or other media with a minimal kernel
|
|
(e.g. support for RAM disks, initrd, a.out, and the Ext2 FS) and
|
|
loads initrd
|
|
2) /linuxrc determines what is needed to (1) mount the "real" root FS
|
|
(i.e. device type, device drivers, file system) and (2) the
|
|
distribution media (e.g. CD-ROM, network, tape, ...). This can be
|
|
done by asking the user, by auto-probing, or by using a hybrid
|
|
approach.
|
|
3) /linuxrc loads the necessary kernel modules
|
|
4) /linuxrc creates and populates the root file system (this doesn't
|
|
have to be a very usable system yet)
|
|
5) /linuxrc invokes pivot_root to change the root file system and
|
|
execs - via chroot - a program that continues the installation
|
|
6) the boot loader is installed
|
|
7) the boot loader is configured to load an initrd with the set of
|
|
modules that was used to bring up the system (e.g. /initrd can be
|
|
modified, then unmounted, and finally, the image is written from
|
|
/dev/ram0 or /dev/rd/0 to a file)
|
|
8) now the system is bootable and additional installation tasks can be
|
|
performed
|
|
|
|
The key role of initrd here is to re-use the configuration data during
|
|
normal system operation without requiring the use of a bloated "generic"
|
|
kernel or re-compiling or re-linking the kernel.
|
|
|
|
A second scenario is for installations where Linux runs on systems with
|
|
different hardware configurations in a single administrative domain. In
|
|
such cases, it is desirable to generate only a small set of kernels
|
|
(ideally only one) and to keep the system-specific part of configuration
|
|
information as small as possible. In this case, a common initrd could be
|
|
generated with all the necessary modules. Then, only /linuxrc or a file
|
|
read by it would have to be different.
|
|
|
|
A third scenario are more convenient recovery disks, because information
|
|
like the location of the root FS partition doesn't have to be provided at
|
|
boot time, but the system loaded from initrd can invoke a user-friendly
|
|
dialog and it can also perform some sanity checks (or even some form of
|
|
auto-detection).
|
|
|
|
Last not least, CD-ROM distributors may use it for better installation
|
|
from CD, e.g. by using a boot floppy and bootstrapping a bigger RAM disk
|
|
via initrd from CD; or by booting via a loader like LOADLIN or directly
|
|
from the CD-ROM, and loading the RAM disk from CD without need of
|
|
floppies.
|
|
|
|
|
|
Obsolete root change mechanism
|
|
------------------------------
|
|
|
|
The following mechanism was used before the introduction of pivot_root.
|
|
Current kernels still support it, but you should _not_ rely on its
|
|
continued availability.
|
|
|
|
It works by mounting the "real" root device (i.e. the one set with rdev
|
|
in the kernel image or with root=... at the boot command line) as the
|
|
root file system when linuxrc exits. The initrd file system is then
|
|
unmounted, or, if it is still busy, moved to a directory /initrd, if
|
|
such a directory exists on the new root file system.
|
|
|
|
In order to use this mechanism, you do not have to specify the boot
|
|
command options root, init, or rw. (If specified, they will affect
|
|
the real root file system, not the initrd environment.)
|
|
|
|
If /proc is mounted, the "real" root device can be changed from within
|
|
linuxrc by writing the number of the new root FS device to the special
|
|
file /proc/sys/kernel/real-root-dev, e.g.
|
|
|
|
# echo 0x301 >/proc/sys/kernel/real-root-dev
|
|
|
|
Note that the mechanism is incompatible with NFS and similar file
|
|
systems.
|
|
|
|
This old, deprecated mechanism is commonly called "change_root", while
|
|
the new, supported mechanism is called "pivot_root".
|
|
|
|
|
|
Resources
|
|
---------
|
|
|
|
[1] Almesberger, Werner; "Booting Linux: The History and the Future"
|
|
http://www.almesberger.net/cv/papers/ols2k-9.ps.gz
|
|
[2] newlib package (experimental), with initrd example
|
|
http://sources.redhat.com/newlib/
|
|
[3] Brouwer, Andries; "util-linux: Miscellaneous utilities for Linux"
|
|
ftp://ftp.win.tue.nl/pub/linux-local/utils/util-linux/
|