linux/drivers/acpi/acpica/exregion.c
Bob Moore ba494beeaa ACPICA: AcpiSrc: Fix some translation issues for Linux conversion
Fixes issues like this:

i_aSL -> iASL
00-7_f -> 00-7F
local_fADT -> local_FADT
execute_oSI -> execute_OSI

Also, in function headers, the parameters are now translated to
lower case (with underscores if necessary.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-07-17 00:05:51 -04:00

517 lines
15 KiB
C

/******************************************************************************
*
* Module Name: exregion - ACPI default op_region (address space) handlers
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acinterp.h"
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exregion")
/*******************************************************************************
*
* FUNCTION: acpi_ex_system_memory_space_handler
*
* PARAMETERS: function - Read or Write operation
* address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
* value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the System Memory address space (Op Region)
*
******************************************************************************/
acpi_status
acpi_ex_system_memory_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
u64 *value,
void *handler_context, void *region_context)
{
acpi_status status = AE_OK;
void *logical_addr_ptr = NULL;
struct acpi_mem_space_context *mem_info = region_context;
u32 length;
acpi_size map_length;
acpi_size page_boundary_map_length;
#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
u32 remainder;
#endif
ACPI_FUNCTION_TRACE(ex_system_memory_space_handler);
/* Validate and translate the bit width */
switch (bit_width) {
case 8:
length = 1;
break;
case 16:
length = 2;
break;
case 32:
length = 4;
break;
case 64:
length = 8;
break;
default:
ACPI_ERROR((AE_INFO, "Invalid SystemMemory width %u",
bit_width));
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
/*
* Hardware does not support non-aligned data transfers, we must verify
* the request.
*/
(void)acpi_ut_short_divide((u64) address, length, NULL, &remainder);
if (remainder != 0) {
return_ACPI_STATUS(AE_AML_ALIGNMENT);
}
#endif
/*
* Does the request fit into the cached memory mapping?
* Is 1) Address below the current mapping? OR
* 2) Address beyond the current mapping?
*/
if ((address < mem_info->mapped_physical_address) ||
(((u64) address + length) > ((u64)
mem_info->mapped_physical_address +
mem_info->mapped_length))) {
/*
* The request cannot be resolved by the current memory mapping;
* Delete the existing mapping and create a new one.
*/
if (mem_info->mapped_length) {
/* Valid mapping, delete it */
acpi_os_unmap_memory(mem_info->mapped_logical_address,
mem_info->mapped_length);
}
/*
* Attempt to map from the requested address to the end of the region.
* However, we will never map more than one page, nor will we cross
* a page boundary.
*/
map_length = (acpi_size)
((mem_info->address + mem_info->length) - address);
/*
* If mapping the entire remaining portion of the region will cross
* a page boundary, just map up to the page boundary, do not cross.
* On some systems, crossing a page boundary while mapping regions
* can cause warnings if the pages have different attributes
* due to resource management
*/
page_boundary_map_length =
ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address;
if (!page_boundary_map_length) {
page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE;
}
if (map_length > page_boundary_map_length) {
map_length = page_boundary_map_length;
}
/* Create a new mapping starting at the address given */
mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length);
if (!mem_info->mapped_logical_address) {
ACPI_ERROR((AE_INFO,
"Could not map memory at 0x%8.8X%8.8X, size %u",
ACPI_FORMAT_NATIVE_UINT(address),
(u32) map_length));
mem_info->mapped_length = 0;
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Save the physical address and mapping size */
mem_info->mapped_physical_address = address;
mem_info->mapped_length = map_length;
}
/*
* Generate a logical pointer corresponding to the address we want to
* access
*/
logical_addr_ptr = mem_info->mapped_logical_address +
((u64) address - (u64) mem_info->mapped_physical_address);
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"System-Memory (width %u) R/W %u Address=%8.8X%8.8X\n",
bit_width, function,
ACPI_FORMAT_NATIVE_UINT(address)));
/*
* Perform the memory read or write
*
* Note: For machines that do not support non-aligned transfers, the target
* address was checked for alignment above. We do not attempt to break the
* transfer up into smaller (byte-size) chunks because the AML specifically
* asked for a transfer width that the hardware may require.
*/
switch (function) {
case ACPI_READ:
*value = 0;
switch (bit_width) {
case 8:
*value = (u64) ACPI_GET8(logical_addr_ptr);
break;
case 16:
*value = (u64) ACPI_GET16(logical_addr_ptr);
break;
case 32:
*value = (u64) ACPI_GET32(logical_addr_ptr);
break;
case 64:
*value = (u64) ACPI_GET64(logical_addr_ptr);
break;
default:
/* bit_width was already validated */
break;
}
break;
case ACPI_WRITE:
switch (bit_width) {
case 8:
ACPI_SET8(logical_addr_ptr) = (u8) * value;
break;
case 16:
ACPI_SET16(logical_addr_ptr) = (u16) * value;
break;
case 32:
ACPI_SET32(logical_addr_ptr) = (u32) * value;
break;
case 64:
ACPI_SET64(logical_addr_ptr) = (u64) * value;
break;
default:
/* bit_width was already validated */
break;
}
break;
default:
status = AE_BAD_PARAMETER;
break;
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_system_io_space_handler
*
* PARAMETERS: function - Read or Write operation
* address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
* value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the System IO address space (Op Region)
*
******************************************************************************/
acpi_status
acpi_ex_system_io_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
u64 *value,
void *handler_context, void *region_context)
{
acpi_status status = AE_OK;
u32 value32;
ACPI_FUNCTION_TRACE(ex_system_io_space_handler);
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"System-IO (width %u) R/W %u Address=%8.8X%8.8X\n",
bit_width, function,
ACPI_FORMAT_NATIVE_UINT(address)));
/* Decode the function parameter */
switch (function) {
case ACPI_READ:
status = acpi_hw_read_port((acpi_io_address) address,
&value32, bit_width);
*value = value32;
break;
case ACPI_WRITE:
status = acpi_hw_write_port((acpi_io_address) address,
(u32) * value, bit_width);
break;
default:
status = AE_BAD_PARAMETER;
break;
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_pci_config_space_handler
*
* PARAMETERS: function - Read or Write operation
* address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
* value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the PCI Config address space (Op Region)
*
******************************************************************************/
acpi_status
acpi_ex_pci_config_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
u64 *value,
void *handler_context, void *region_context)
{
acpi_status status = AE_OK;
struct acpi_pci_id *pci_id;
u16 pci_register;
ACPI_FUNCTION_TRACE(ex_pci_config_space_handler);
/*
* The arguments to acpi_os(Read|Write)pci_configuration are:
*
* pci_segment is the PCI bus segment range 0-31
* pci_bus is the PCI bus number range 0-255
* pci_device is the PCI device number range 0-31
* pci_function is the PCI device function number
* pci_register is the Config space register range 0-255 bytes
*
* value - input value for write, output address for read
*
*/
pci_id = (struct acpi_pci_id *)region_context;
pci_register = (u16) (u32) address;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Pci-Config %u (%u) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n",
function, bit_width, pci_id->segment, pci_id->bus,
pci_id->device, pci_id->function, pci_register));
switch (function) {
case ACPI_READ:
status = acpi_os_read_pci_configuration(pci_id, pci_register,
value, bit_width);
break;
case ACPI_WRITE:
status = acpi_os_write_pci_configuration(pci_id, pci_register,
*value, bit_width);
break;
default:
status = AE_BAD_PARAMETER;
break;
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_cmos_space_handler
*
* PARAMETERS: function - Read or Write operation
* address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
* value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the CMOS address space (Op Region)
*
******************************************************************************/
acpi_status
acpi_ex_cmos_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
u64 *value,
void *handler_context, void *region_context)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE(ex_cmos_space_handler);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_pci_bar_space_handler
*
* PARAMETERS: function - Read or Write operation
* address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
* value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the PCI bar_target address space (Op Region)
*
******************************************************************************/
acpi_status
acpi_ex_pci_bar_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
u64 *value,
void *handler_context, void *region_context)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE(ex_pci_bar_space_handler);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_data_table_space_handler
*
* PARAMETERS: function - Read or Write operation
* address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
* value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the Data Table address space (Op Region)
*
******************************************************************************/
acpi_status
acpi_ex_data_table_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
u64 *value,
void *handler_context, void *region_context)
{
ACPI_FUNCTION_TRACE(ex_data_table_space_handler);
/*
* Perform the memory read or write. The bit_width was already
* validated.
*/
switch (function) {
case ACPI_READ:
ACPI_MEMCPY(ACPI_CAST_PTR(char, value),
ACPI_PHYSADDR_TO_PTR(address),
ACPI_DIV_8(bit_width));
break;
case ACPI_WRITE:
ACPI_MEMCPY(ACPI_PHYSADDR_TO_PTR(address),
ACPI_CAST_PTR(char, value), ACPI_DIV_8(bit_width));
break;
default:
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
return_ACPI_STATUS(AE_OK);
}