mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 18:11:56 +00:00
e358bef7c3
Some switches rely on unique pvids to ensure port separation in standalone mode, because they don't have a port forwarding matrix configurable in hardware. So, setups like a group of 2 uppers with the same VLAN, swp0.100 and swp1.100, will cause traffic tagged with VLAN 100 to be autonomously forwarded between these switch ports, in spite of there being no bridge between swp0 and swp1. These drivers need to prevent this from happening. They need to have VLAN filtering enabled in standalone mode (so they'll drop frames tagged with unknown VLANs) and they can only accept an 8021q upper on a port as long as it isn't installed on any other port too. So give them the chance to veto bad user requests. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Kurt: Pass info instead of ptr] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|---|---|---|
| .. | ||
| dsa2.c | ||
| dsa_priv.h | ||
| dsa.c | ||
| Kconfig | ||
| Makefile | ||
| master.c | ||
| port.c | ||
| slave.c | ||
| switch.c | ||
| tag_8021q.c | ||
| tag_ar9331.c | ||
| tag_brcm.c | ||
| tag_dsa.c | ||
| tag_edsa.c | ||
| tag_gswip.c | ||
| tag_hellcreek.c | ||
| tag_ksz.c | ||
| tag_lan9303.c | ||
| tag_mtk.c | ||
| tag_ocelot.c | ||
| tag_qca.c | ||
| tag_rtl4_a.c | ||
| tag_sja1105.c | ||
| tag_trailer.c | ||