linux/drivers/char/ipmi/ipmi_ssif.c
Linus Torvalds 8de1037a96 Fix a bunch of little problems in IPMI
This is mostly just doc, config, and little tweaks.  Nothing big, which
 is why there was nothing for 6.0.  There is one crash fix, but it's not
 something that I think anyone is using yet.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmM8sVMACgkQYfOMkJGb
 /4HBow//ZhkVpFqURCDNjO+GjVL9tzxuvnUQPeKPYlnUkpY53mPg7PucEZu4DXWD
 GgOz/wGxoCZL0n+Na8LKD+4NNo9gXMZH8k+o7GwIPdAu970MC80XSnr3KrbkSv6J
 ID29kZE+jOzd3orM8J662Hqv9BK8FKLCFFBUMuzeMQYH1oOJvFjSK4OXLxIo+h0M
 3LhNcj8yPa9pW/Uam8sIBj9JLsUZEr7wqG8VESnekxZ6Pqtpaq+Ik0pJtPP/Vxw+
 Ri06UeVSO+614Ywo+aVxVxezFhnxx77/Y5Uvo4UMw2ssaslku/Glmp4XzWjgAOj5
 l8unB1PFll5s7jkzrcL5HVsyZt81+OBTItbO6HaaejKHc99Is+g7IlO9o0bg9pUS
 OyBeQHc7k5PfI40nwve2LUPz6FwO3NEaaz3oMrQuy1pnpEwdE7GdPiYdJe3kVHem
 0hIHby99jFkTlvvNbLj0JrejEd5As45UNDlfBjJuYh7L/2A3gpbNX3MHxD4cwZRg
 9LuM/BTOR274QvSb49xlQuxMOf8lagXOTajkvLUYBSkenQi8PAmcjk74Zgk/FYRW
 qpDuA8LC7XVTk7JtS9ZHECkLjk1Qe1CUVNcrCQmB8Lyapx3SI8pDB2SQOzf5zG5Z
 /Ty4Qgw8eUJWepJ4BVymalHFhCgdsz1vlFwMT3KJc+giUFTlNwY=
 =wVwj
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi

Pull IPMI updates from Corey Minyard:
 "Fix a bunch of little problems in IPMI

  This is mostly just doc, config, and little tweaks. Nothing big, which
  is why there was nothing for 6.0. There is one crash fix, but it's not
  something that I think anyone is using yet"

* tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: Remove unused struct watcher_entry
  ipmi: kcs: aspeed: Update port address comments
  ipmi: Add __init/__exit annotations to module init/exit funcs
  ipmi:ipmb: Don't call ipmi_unregister_smi() on a register failure
  ipmi:ipmb: Fix a vague comment and a typo
  dt-binding: ipmi: add fallback to npcm845 compatible
  ipmi: Fix comment typo
  char: ipmi: modify NPCM KCS configuration
  dt-bindings: ipmi: Add npcm845 compatible
2022-10-11 10:42:25 -07:00

2165 lines
55 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* ipmi_ssif.c
*
* The interface to the IPMI driver for SMBus access to a SMBus
* compliant device. Called SSIF by the IPMI spec.
*
* Author: Intel Corporation
* Todd Davis <todd.c.davis@intel.com>
*
* Rewritten by Corey Minyard <minyard@acm.org> to support the
* non-blocking I2C interface, add support for multi-part
* transactions, add PEC support, and general clenaup.
*
* Copyright 2003 Intel Corporation
* Copyright 2005 MontaVista Software
*/
/*
* This file holds the "policy" for the interface to the SSIF state
* machine. It does the configuration, handles timers and interrupts,
* and drives the real SSIF state machine.
*/
#define pr_fmt(fmt) "ipmi_ssif: " fmt
#define dev_fmt(fmt) "ipmi_ssif: " fmt
#if defined(MODVERSIONS)
#include <linux/modversions.h>
#endif
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/i2c.h>
#include <linux/ipmi_smi.h>
#include <linux/init.h>
#include <linux/dmi.h>
#include <linux/kthread.h>
#include <linux/acpi.h>
#include <linux/ctype.h>
#include <linux/time64.h>
#include "ipmi_dmi.h"
#define DEVICE_NAME "ipmi_ssif"
#define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD 0x57
#define SSIF_IPMI_REQUEST 2
#define SSIF_IPMI_MULTI_PART_REQUEST_START 6
#define SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE 7
#define SSIF_IPMI_MULTI_PART_REQUEST_END 8
#define SSIF_IPMI_RESPONSE 3
#define SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE 9
/* ssif_debug is a bit-field
* SSIF_DEBUG_MSG - commands and their responses
* SSIF_DEBUG_STATES - message states
* SSIF_DEBUG_TIMING - Measure times between events in the driver
*/
#define SSIF_DEBUG_TIMING 4
#define SSIF_DEBUG_STATE 2
#define SSIF_DEBUG_MSG 1
#define SSIF_NODEBUG 0
#define SSIF_DEFAULT_DEBUG (SSIF_NODEBUG)
/*
* Timer values
*/
#define SSIF_MSG_USEC 20000 /* 20ms between message tries. */
#define SSIF_MSG_PART_USEC 5000 /* 5ms for a message part */
/* How many times to we retry sending/receiving the message. */
#define SSIF_SEND_RETRIES 5
#define SSIF_RECV_RETRIES 250
#define SSIF_MSG_MSEC (SSIF_MSG_USEC / 1000)
#define SSIF_MSG_JIFFIES ((SSIF_MSG_USEC * 1000) / TICK_NSEC)
#define SSIF_MSG_PART_JIFFIES ((SSIF_MSG_PART_USEC * 1000) / TICK_NSEC)
/*
* Timeout for the watch, only used for get flag timer.
*/
#define SSIF_WATCH_MSG_TIMEOUT msecs_to_jiffies(10)
#define SSIF_WATCH_WATCHDOG_TIMEOUT msecs_to_jiffies(250)
enum ssif_intf_state {
SSIF_NORMAL,
SSIF_GETTING_FLAGS,
SSIF_GETTING_EVENTS,
SSIF_CLEARING_FLAGS,
SSIF_GETTING_MESSAGES,
/* FIXME - add watchdog stuff. */
};
#define SSIF_IDLE(ssif) ((ssif)->ssif_state == SSIF_NORMAL \
&& (ssif)->curr_msg == NULL)
/*
* Indexes into stats[] in ssif_info below.
*/
enum ssif_stat_indexes {
/* Number of total messages sent. */
SSIF_STAT_sent_messages = 0,
/*
* Number of message parts sent. Messages may be broken into
* parts if they are long.
*/
SSIF_STAT_sent_messages_parts,
/*
* Number of time a message was retried.
*/
SSIF_STAT_send_retries,
/*
* Number of times the send of a message failed.
*/
SSIF_STAT_send_errors,
/*
* Number of message responses received.
*/
SSIF_STAT_received_messages,
/*
* Number of message fragments received.
*/
SSIF_STAT_received_message_parts,
/*
* Number of times the receive of a message was retried.
*/
SSIF_STAT_receive_retries,
/*
* Number of errors receiving messages.
*/
SSIF_STAT_receive_errors,
/*
* Number of times a flag fetch was requested.
*/
SSIF_STAT_flag_fetches,
/*
* Number of times the hardware didn't follow the state machine.
*/
SSIF_STAT_hosed,
/*
* Number of received events.
*/
SSIF_STAT_events,
/* Number of asyncronous messages received. */
SSIF_STAT_incoming_messages,
/* Number of watchdog pretimeouts. */
SSIF_STAT_watchdog_pretimeouts,
/* Number of alers received. */
SSIF_STAT_alerts,
/* Always add statistics before this value, it must be last. */
SSIF_NUM_STATS
};
struct ssif_addr_info {
struct i2c_board_info binfo;
char *adapter_name;
int debug;
int slave_addr;
enum ipmi_addr_src addr_src;
union ipmi_smi_info_union addr_info;
struct device *dev;
struct i2c_client *client;
struct mutex clients_mutex;
struct list_head clients;
struct list_head link;
};
struct ssif_info;
typedef void (*ssif_i2c_done)(struct ssif_info *ssif_info, int result,
unsigned char *data, unsigned int len);
struct ssif_info {
struct ipmi_smi *intf;
spinlock_t lock;
struct ipmi_smi_msg *waiting_msg;
struct ipmi_smi_msg *curr_msg;
enum ssif_intf_state ssif_state;
unsigned long ssif_debug;
struct ipmi_smi_handlers handlers;
enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */
union ipmi_smi_info_union addr_info;
/*
* Flags from the last GET_MSG_FLAGS command, used when an ATTN
* is set to hold the flags until we are done handling everything
* from the flags.
*/
#define RECEIVE_MSG_AVAIL 0x01
#define EVENT_MSG_BUFFER_FULL 0x02
#define WDT_PRE_TIMEOUT_INT 0x08
unsigned char msg_flags;
u8 global_enables;
bool has_event_buffer;
bool supports_alert;
/*
* Used to tell what we should do with alerts. If we are
* waiting on a response, read the data immediately.
*/
bool got_alert;
bool waiting_alert;
/*
* If set to true, this will request events the next time the
* state machine is idle.
*/
bool req_events;
/*
* If set to true, this will request flags the next time the
* state machine is idle.
*/
bool req_flags;
/*
* Used to perform timer operations when run-to-completion
* mode is on. This is a countdown timer.
*/
int rtc_us_timer;
/* Used for sending/receiving data. +1 for the length. */
unsigned char data[IPMI_MAX_MSG_LENGTH + 1];
unsigned int data_len;
/* Temp receive buffer, gets copied into data. */
unsigned char recv[I2C_SMBUS_BLOCK_MAX];
struct i2c_client *client;
ssif_i2c_done done_handler;
/* Thread interface handling */
struct task_struct *thread;
struct completion wake_thread;
bool stopping;
int i2c_read_write;
int i2c_command;
unsigned char *i2c_data;
unsigned int i2c_size;
struct timer_list retry_timer;
int retries_left;
long watch_timeout; /* Timeout for flags check, 0 if off. */
struct timer_list watch_timer; /* Flag fetch timer. */
/* Info from SSIF cmd */
unsigned char max_xmit_msg_size;
unsigned char max_recv_msg_size;
bool cmd8_works; /* See test_multipart_messages() for details. */
unsigned int multi_support;
int supports_pec;
#define SSIF_NO_MULTI 0
#define SSIF_MULTI_2_PART 1
#define SSIF_MULTI_n_PART 2
unsigned char *multi_data;
unsigned int multi_len;
unsigned int multi_pos;
atomic_t stats[SSIF_NUM_STATS];
};
#define ssif_inc_stat(ssif, stat) \
atomic_inc(&(ssif)->stats[SSIF_STAT_ ## stat])
#define ssif_get_stat(ssif, stat) \
((unsigned int) atomic_read(&(ssif)->stats[SSIF_STAT_ ## stat]))
static bool initialized;
static bool platform_registered;
static void return_hosed_msg(struct ssif_info *ssif_info,
struct ipmi_smi_msg *msg);
static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags);
static int start_send(struct ssif_info *ssif_info,
unsigned char *data,
unsigned int len);
static unsigned long *ipmi_ssif_lock_cond(struct ssif_info *ssif_info,
unsigned long *flags)
__acquires(&ssif_info->lock)
{
spin_lock_irqsave(&ssif_info->lock, *flags);
return flags;
}
static void ipmi_ssif_unlock_cond(struct ssif_info *ssif_info,
unsigned long *flags)
__releases(&ssif_info->lock)
{
spin_unlock_irqrestore(&ssif_info->lock, *flags);
}
static void deliver_recv_msg(struct ssif_info *ssif_info,
struct ipmi_smi_msg *msg)
{
if (msg->rsp_size < 0) {
return_hosed_msg(ssif_info, msg);
dev_err(&ssif_info->client->dev,
"%s: Malformed message: rsp_size = %d\n",
__func__, msg->rsp_size);
} else {
ipmi_smi_msg_received(ssif_info->intf, msg);
}
}
static void return_hosed_msg(struct ssif_info *ssif_info,
struct ipmi_smi_msg *msg)
{
ssif_inc_stat(ssif_info, hosed);
/* Make it a response */
msg->rsp[0] = msg->data[0] | 4;
msg->rsp[1] = msg->data[1];
msg->rsp[2] = 0xFF; /* Unknown error. */
msg->rsp_size = 3;
deliver_recv_msg(ssif_info, msg);
}
/*
* Must be called with the message lock held. This will release the
* message lock. Note that the caller will check SSIF_IDLE and start a
* new operation, so there is no need to check for new messages to
* start in here.
*/
static void start_clear_flags(struct ssif_info *ssif_info, unsigned long *flags)
{
unsigned char msg[3];
ssif_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
ssif_info->ssif_state = SSIF_CLEARING_FLAGS;
ipmi_ssif_unlock_cond(ssif_info, flags);
/* Make sure the watchdog pre-timeout flag is not set at startup. */
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
msg[2] = WDT_PRE_TIMEOUT_INT;
if (start_send(ssif_info, msg, 3) != 0) {
/* Error, just go to normal state. */
ssif_info->ssif_state = SSIF_NORMAL;
}
}
static void start_flag_fetch(struct ssif_info *ssif_info, unsigned long *flags)
{
unsigned char mb[2];
ssif_info->req_flags = false;
ssif_info->ssif_state = SSIF_GETTING_FLAGS;
ipmi_ssif_unlock_cond(ssif_info, flags);
mb[0] = (IPMI_NETFN_APP_REQUEST << 2);
mb[1] = IPMI_GET_MSG_FLAGS_CMD;
if (start_send(ssif_info, mb, 2) != 0)
ssif_info->ssif_state = SSIF_NORMAL;
}
static void check_start_send(struct ssif_info *ssif_info, unsigned long *flags,
struct ipmi_smi_msg *msg)
{
if (start_send(ssif_info, msg->data, msg->data_size) != 0) {
unsigned long oflags;
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
ssif_info->curr_msg = NULL;
ssif_info->ssif_state = SSIF_NORMAL;
ipmi_ssif_unlock_cond(ssif_info, flags);
ipmi_free_smi_msg(msg);
}
}
static void start_event_fetch(struct ssif_info *ssif_info, unsigned long *flags)
{
struct ipmi_smi_msg *msg;
ssif_info->req_events = false;
msg = ipmi_alloc_smi_msg();
if (!msg) {
ssif_info->ssif_state = SSIF_NORMAL;
ipmi_ssif_unlock_cond(ssif_info, flags);
return;
}
ssif_info->curr_msg = msg;
ssif_info->ssif_state = SSIF_GETTING_EVENTS;
ipmi_ssif_unlock_cond(ssif_info, flags);
msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
msg->data_size = 2;
check_start_send(ssif_info, flags, msg);
}
static void start_recv_msg_fetch(struct ssif_info *ssif_info,
unsigned long *flags)
{
struct ipmi_smi_msg *msg;
msg = ipmi_alloc_smi_msg();
if (!msg) {
ssif_info->ssif_state = SSIF_NORMAL;
ipmi_ssif_unlock_cond(ssif_info, flags);
return;
}
ssif_info->curr_msg = msg;
ssif_info->ssif_state = SSIF_GETTING_MESSAGES;
ipmi_ssif_unlock_cond(ssif_info, flags);
msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg->data[1] = IPMI_GET_MSG_CMD;
msg->data_size = 2;
check_start_send(ssif_info, flags, msg);
}
/*
* Must be called with the message lock held. This will release the
* message lock. Note that the caller will check SSIF_IDLE and start a
* new operation, so there is no need to check for new messages to
* start in here.
*/
static void handle_flags(struct ssif_info *ssif_info, unsigned long *flags)
{
if (ssif_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
/* Watchdog pre-timeout */
ssif_inc_stat(ssif_info, watchdog_pretimeouts);
start_clear_flags(ssif_info, flags);
ipmi_smi_watchdog_pretimeout(ssif_info->intf);
} else if (ssif_info->msg_flags & RECEIVE_MSG_AVAIL)
/* Messages available. */
start_recv_msg_fetch(ssif_info, flags);
else if (ssif_info->msg_flags & EVENT_MSG_BUFFER_FULL)
/* Events available. */
start_event_fetch(ssif_info, flags);
else {
ssif_info->ssif_state = SSIF_NORMAL;
ipmi_ssif_unlock_cond(ssif_info, flags);
}
}
static int ipmi_ssif_thread(void *data)
{
struct ssif_info *ssif_info = data;
while (!kthread_should_stop()) {
int result;
/* Wait for something to do */
result = wait_for_completion_interruptible(
&ssif_info->wake_thread);
if (ssif_info->stopping)
break;
if (result == -ERESTARTSYS)
continue;
init_completion(&ssif_info->wake_thread);
if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) {
result = i2c_smbus_write_block_data(
ssif_info->client, ssif_info->i2c_command,
ssif_info->i2c_data[0],
ssif_info->i2c_data + 1);
ssif_info->done_handler(ssif_info, result, NULL, 0);
} else {
result = i2c_smbus_read_block_data(
ssif_info->client, ssif_info->i2c_command,
ssif_info->i2c_data);
if (result < 0)
ssif_info->done_handler(ssif_info, result,
NULL, 0);
else
ssif_info->done_handler(ssif_info, 0,
ssif_info->i2c_data,
result);
}
}
return 0;
}
static void ssif_i2c_send(struct ssif_info *ssif_info,
ssif_i2c_done handler,
int read_write, int command,
unsigned char *data, unsigned int size)
{
ssif_info->done_handler = handler;
ssif_info->i2c_read_write = read_write;
ssif_info->i2c_command = command;
ssif_info->i2c_data = data;
ssif_info->i2c_size = size;
complete(&ssif_info->wake_thread);
}
static void msg_done_handler(struct ssif_info *ssif_info, int result,
unsigned char *data, unsigned int len);
static void start_get(struct ssif_info *ssif_info)
{
ssif_info->rtc_us_timer = 0;
ssif_info->multi_pos = 0;
ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
SSIF_IPMI_RESPONSE,
ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
}
static void retry_timeout(struct timer_list *t)
{
struct ssif_info *ssif_info = from_timer(ssif_info, t, retry_timer);
unsigned long oflags, *flags;
bool waiting;
if (ssif_info->stopping)
return;
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
waiting = ssif_info->waiting_alert;
ssif_info->waiting_alert = false;
ipmi_ssif_unlock_cond(ssif_info, flags);
if (waiting)
start_get(ssif_info);
}
static void watch_timeout(struct timer_list *t)
{
struct ssif_info *ssif_info = from_timer(ssif_info, t, watch_timer);
unsigned long oflags, *flags;
if (ssif_info->stopping)
return;
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
if (ssif_info->watch_timeout) {
mod_timer(&ssif_info->watch_timer,
jiffies + ssif_info->watch_timeout);
if (SSIF_IDLE(ssif_info)) {
start_flag_fetch(ssif_info, flags); /* Releases lock */
return;
}
ssif_info->req_flags = true;
}
ipmi_ssif_unlock_cond(ssif_info, flags);
}
static void ssif_alert(struct i2c_client *client, enum i2c_alert_protocol type,
unsigned int data)
{
struct ssif_info *ssif_info = i2c_get_clientdata(client);
unsigned long oflags, *flags;
bool do_get = false;
if (type != I2C_PROTOCOL_SMBUS_ALERT)
return;
ssif_inc_stat(ssif_info, alerts);
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
if (ssif_info->waiting_alert) {
ssif_info->waiting_alert = false;
del_timer(&ssif_info->retry_timer);
do_get = true;
} else if (ssif_info->curr_msg) {
ssif_info->got_alert = true;
}
ipmi_ssif_unlock_cond(ssif_info, flags);
if (do_get)
start_get(ssif_info);
}
static int start_resend(struct ssif_info *ssif_info);
static void msg_done_handler(struct ssif_info *ssif_info, int result,
unsigned char *data, unsigned int len)
{
struct ipmi_smi_msg *msg;
unsigned long oflags, *flags;
/*
* We are single-threaded here, so no need for a lock until we
* start messing with driver states or the queues.
*/
if (result < 0) {
ssif_info->retries_left--;
if (ssif_info->retries_left > 0) {
ssif_inc_stat(ssif_info, receive_retries);
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
ssif_info->waiting_alert = true;
ssif_info->rtc_us_timer = SSIF_MSG_USEC;
if (!ssif_info->stopping)
mod_timer(&ssif_info->retry_timer,
jiffies + SSIF_MSG_JIFFIES);
ipmi_ssif_unlock_cond(ssif_info, flags);
return;
}
ssif_inc_stat(ssif_info, receive_errors);
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
dev_dbg(&ssif_info->client->dev,
"%s: Error %d\n", __func__, result);
len = 0;
goto continue_op;
}
if ((len > 1) && (ssif_info->multi_pos == 0)
&& (data[0] == 0x00) && (data[1] == 0x01)) {
/* Start of multi-part read. Start the next transaction. */
int i;
ssif_inc_stat(ssif_info, received_message_parts);
/* Remove the multi-part read marker. */
len -= 2;
data += 2;
for (i = 0; i < len; i++)
ssif_info->data[i] = data[i];
ssif_info->multi_len = len;
ssif_info->multi_pos = 1;
ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
return;
} else if (ssif_info->multi_pos) {
/* Middle of multi-part read. Start the next transaction. */
int i;
unsigned char blocknum;
if (len == 0) {
result = -EIO;
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
dev_dbg(&ssif_info->client->dev,
"Middle message with no data\n");
goto continue_op;
}
blocknum = data[0];
len--;
data++;
if (blocknum != 0xff && len != 31) {
/* All blocks but the last must have 31 data bytes. */
result = -EIO;
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
dev_dbg(&ssif_info->client->dev,
"Received middle message <31\n");
goto continue_op;
}
if (ssif_info->multi_len + len > IPMI_MAX_MSG_LENGTH) {
/* Received message too big, abort the operation. */
result = -E2BIG;
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
dev_dbg(&ssif_info->client->dev,
"Received message too big\n");
goto continue_op;
}
for (i = 0; i < len; i++)
ssif_info->data[i + ssif_info->multi_len] = data[i];
ssif_info->multi_len += len;
if (blocknum == 0xff) {
/* End of read */
len = ssif_info->multi_len;
data = ssif_info->data;
} else if (blocknum + 1 != ssif_info->multi_pos) {
/*
* Out of sequence block, just abort. Block
* numbers start at zero for the second block,
* but multi_pos starts at one, so the +1.
*/
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
dev_dbg(&ssif_info->client->dev,
"Received message out of sequence, expected %u, got %u\n",
ssif_info->multi_pos - 1, blocknum);
result = -EIO;
} else {
ssif_inc_stat(ssif_info, received_message_parts);
ssif_info->multi_pos++;
ssif_i2c_send(ssif_info, msg_done_handler,
I2C_SMBUS_READ,
SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
ssif_info->recv,
I2C_SMBUS_BLOCK_DATA);
return;
}
}
continue_op:
if (result < 0) {
ssif_inc_stat(ssif_info, receive_errors);
} else {
ssif_inc_stat(ssif_info, received_messages);
ssif_inc_stat(ssif_info, received_message_parts);
}
if (ssif_info->ssif_debug & SSIF_DEBUG_STATE)
dev_dbg(&ssif_info->client->dev,
"DONE 1: state = %d, result=%d\n",
ssif_info->ssif_state, result);
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
msg = ssif_info->curr_msg;
if (msg) {
if (data) {
if (len > IPMI_MAX_MSG_LENGTH)
len = IPMI_MAX_MSG_LENGTH;
memcpy(msg->rsp, data, len);
} else {
len = 0;
}
msg->rsp_size = len;
ssif_info->curr_msg = NULL;
}
switch (ssif_info->ssif_state) {
case SSIF_NORMAL:
ipmi_ssif_unlock_cond(ssif_info, flags);
if (!msg)
break;
if (result < 0)
return_hosed_msg(ssif_info, msg);
else
deliver_recv_msg(ssif_info, msg);
break;
case SSIF_GETTING_FLAGS:
/* We got the flags from the SSIF, now handle them. */
if ((result < 0) || (len < 4) || (data[2] != 0)) {
/*
* Error fetching flags, or invalid length,
* just give up for now.
*/
ssif_info->ssif_state = SSIF_NORMAL;
ipmi_ssif_unlock_cond(ssif_info, flags);
dev_warn(&ssif_info->client->dev,
"Error getting flags: %d %d, %x\n",
result, len, (len >= 3) ? data[2] : 0);
} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
|| data[1] != IPMI_GET_MSG_FLAGS_CMD) {
/*
* Don't abort here, maybe it was a queued
* response to a previous command.
*/
ipmi_ssif_unlock_cond(ssif_info, flags);
dev_warn(&ssif_info->client->dev,
"Invalid response getting flags: %x %x\n",
data[0], data[1]);
} else {
ssif_inc_stat(ssif_info, flag_fetches);
ssif_info->msg_flags = data[3];
handle_flags(ssif_info, flags);
}
break;
case SSIF_CLEARING_FLAGS:
/* We cleared the flags. */
if ((result < 0) || (len < 3) || (data[2] != 0)) {
/* Error clearing flags */
dev_warn(&ssif_info->client->dev,
"Error clearing flags: %d %d, %x\n",
result, len, (len >= 3) ? data[2] : 0);
} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
|| data[1] != IPMI_CLEAR_MSG_FLAGS_CMD) {
dev_warn(&ssif_info->client->dev,
"Invalid response clearing flags: %x %x\n",
data[0], data[1]);
}
ssif_info->ssif_state = SSIF_NORMAL;
ipmi_ssif_unlock_cond(ssif_info, flags);
break;
case SSIF_GETTING_EVENTS:
if (!msg) {
/* Should never happen, but just in case. */
dev_warn(&ssif_info->client->dev,
"No message set while getting events\n");
ipmi_ssif_unlock_cond(ssif_info, flags);
break;
}
if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
/* Error getting event, probably done. */
msg->done(msg);
/* Take off the event flag. */
ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
handle_flags(ssif_info, flags);
} else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
|| msg->rsp[1] != IPMI_READ_EVENT_MSG_BUFFER_CMD) {
dev_warn(&ssif_info->client->dev,
"Invalid response getting events: %x %x\n",
msg->rsp[0], msg->rsp[1]);
msg->done(msg);
/* Take off the event flag. */
ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
handle_flags(ssif_info, flags);
} else {
handle_flags(ssif_info, flags);
ssif_inc_stat(ssif_info, events);
deliver_recv_msg(ssif_info, msg);
}
break;
case SSIF_GETTING_MESSAGES:
if (!msg) {
/* Should never happen, but just in case. */
dev_warn(&ssif_info->client->dev,
"No message set while getting messages\n");
ipmi_ssif_unlock_cond(ssif_info, flags);
break;
}
if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) {
/* Error getting event, probably done. */
msg->done(msg);
/* Take off the msg flag. */
ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
handle_flags(ssif_info, flags);
} else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
|| msg->rsp[1] != IPMI_GET_MSG_CMD) {
dev_warn(&ssif_info->client->dev,
"Invalid response clearing flags: %x %x\n",
msg->rsp[0], msg->rsp[1]);
msg->done(msg);
/* Take off the msg flag. */
ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
handle_flags(ssif_info, flags);
} else {
ssif_inc_stat(ssif_info, incoming_messages);
handle_flags(ssif_info, flags);
deliver_recv_msg(ssif_info, msg);
}
break;
default:
/* Should never happen, but just in case. */
dev_warn(&ssif_info->client->dev,
"Invalid state in message done handling: %d\n",
ssif_info->ssif_state);
ipmi_ssif_unlock_cond(ssif_info, flags);
}
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
if (SSIF_IDLE(ssif_info) && !ssif_info->stopping) {
if (ssif_info->req_events)
start_event_fetch(ssif_info, flags);
else if (ssif_info->req_flags)
start_flag_fetch(ssif_info, flags);
else
start_next_msg(ssif_info, flags);
} else
ipmi_ssif_unlock_cond(ssif_info, flags);
if (ssif_info->ssif_debug & SSIF_DEBUG_STATE)
dev_dbg(&ssif_info->client->dev,
"DONE 2: state = %d.\n", ssif_info->ssif_state);
}
static void msg_written_handler(struct ssif_info *ssif_info, int result,
unsigned char *data, unsigned int len)
{
/* We are single-threaded here, so no need for a lock. */
if (result < 0) {
ssif_info->retries_left--;
if (ssif_info->retries_left > 0) {
if (!start_resend(ssif_info)) {
ssif_inc_stat(ssif_info, send_retries);
return;
}
/* request failed, just return the error. */
ssif_inc_stat(ssif_info, send_errors);
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
dev_dbg(&ssif_info->client->dev,
"%s: Out of retries\n", __func__);
msg_done_handler(ssif_info, -EIO, NULL, 0);
return;
}
ssif_inc_stat(ssif_info, send_errors);
/*
* Got an error on transmit, let the done routine
* handle it.
*/
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
dev_dbg(&ssif_info->client->dev,
"%s: Error %d\n", __func__, result);
msg_done_handler(ssif_info, result, NULL, 0);
return;
}
if (ssif_info->multi_data) {
/*
* In the middle of a multi-data write. See the comment
* in the SSIF_MULTI_n_PART case in the probe function
* for details on the intricacies of this.
*/
int left, to_write;
unsigned char *data_to_send;
unsigned char cmd;
ssif_inc_stat(ssif_info, sent_messages_parts);
left = ssif_info->multi_len - ssif_info->multi_pos;
to_write = left;
if (to_write > 32)
to_write = 32;
/* Length byte. */
ssif_info->multi_data[ssif_info->multi_pos] = to_write;
data_to_send = ssif_info->multi_data + ssif_info->multi_pos;
ssif_info->multi_pos += to_write;
cmd = SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE;
if (ssif_info->cmd8_works) {
if (left == to_write) {
cmd = SSIF_IPMI_MULTI_PART_REQUEST_END;
ssif_info->multi_data = NULL;
}
} else if (to_write < 32) {
ssif_info->multi_data = NULL;
}
ssif_i2c_send(ssif_info, msg_written_handler,
I2C_SMBUS_WRITE, cmd,
data_to_send, I2C_SMBUS_BLOCK_DATA);
} else {
/* Ready to request the result. */
unsigned long oflags, *flags;
ssif_inc_stat(ssif_info, sent_messages);
ssif_inc_stat(ssif_info, sent_messages_parts);
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
if (ssif_info->got_alert) {
/* The result is already ready, just start it. */
ssif_info->got_alert = false;
ipmi_ssif_unlock_cond(ssif_info, flags);
start_get(ssif_info);
} else {
/* Wait a jiffie then request the next message */
ssif_info->waiting_alert = true;
ssif_info->retries_left = SSIF_RECV_RETRIES;
ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
if (!ssif_info->stopping)
mod_timer(&ssif_info->retry_timer,
jiffies + SSIF_MSG_PART_JIFFIES);
ipmi_ssif_unlock_cond(ssif_info, flags);
}
}
}
static int start_resend(struct ssif_info *ssif_info)
{
int command;
ssif_info->got_alert = false;
if (ssif_info->data_len > 32) {
command = SSIF_IPMI_MULTI_PART_REQUEST_START;
ssif_info->multi_data = ssif_info->data;
ssif_info->multi_len = ssif_info->data_len;
/*
* Subtle thing, this is 32, not 33, because we will
* overwrite the thing at position 32 (which was just
* transmitted) with the new length.
*/
ssif_info->multi_pos = 32;
ssif_info->data[0] = 32;
} else {
ssif_info->multi_data = NULL;
command = SSIF_IPMI_REQUEST;
ssif_info->data[0] = ssif_info->data_len;
}
ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE,
command, ssif_info->data, I2C_SMBUS_BLOCK_DATA);
return 0;
}
static int start_send(struct ssif_info *ssif_info,
unsigned char *data,
unsigned int len)
{
if (len > IPMI_MAX_MSG_LENGTH)
return -E2BIG;
if (len > ssif_info->max_xmit_msg_size)
return -E2BIG;
ssif_info->retries_left = SSIF_SEND_RETRIES;
memcpy(ssif_info->data + 1, data, len);
ssif_info->data_len = len;
return start_resend(ssif_info);
}
/* Must be called with the message lock held. */
static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags)
{
struct ipmi_smi_msg *msg;
unsigned long oflags;
restart:
if (!SSIF_IDLE(ssif_info)) {
ipmi_ssif_unlock_cond(ssif_info, flags);
return;
}
if (!ssif_info->waiting_msg) {
ssif_info->curr_msg = NULL;
ipmi_ssif_unlock_cond(ssif_info, flags);
} else {
int rv;
ssif_info->curr_msg = ssif_info->waiting_msg;
ssif_info->waiting_msg = NULL;
ipmi_ssif_unlock_cond(ssif_info, flags);
rv = start_send(ssif_info,
ssif_info->curr_msg->data,
ssif_info->curr_msg->data_size);
if (rv) {
msg = ssif_info->curr_msg;
ssif_info->curr_msg = NULL;
return_hosed_msg(ssif_info, msg);
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
goto restart;
}
}
}
static void sender(void *send_info,
struct ipmi_smi_msg *msg)
{
struct ssif_info *ssif_info = send_info;
unsigned long oflags, *flags;
BUG_ON(ssif_info->waiting_msg);
ssif_info->waiting_msg = msg;
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
start_next_msg(ssif_info, flags);
if (ssif_info->ssif_debug & SSIF_DEBUG_TIMING) {
struct timespec64 t;
ktime_get_real_ts64(&t);
dev_dbg(&ssif_info->client->dev,
"**Enqueue %02x %02x: %lld.%6.6ld\n",
msg->data[0], msg->data[1],
(long long)t.tv_sec, (long)t.tv_nsec / NSEC_PER_USEC);
}
}
static int get_smi_info(void *send_info, struct ipmi_smi_info *data)
{
struct ssif_info *ssif_info = send_info;
data->addr_src = ssif_info->addr_source;
data->dev = &ssif_info->client->dev;
data->addr_info = ssif_info->addr_info;
get_device(data->dev);
return 0;
}
/*
* Upper layer wants us to request events.
*/
static void request_events(void *send_info)
{
struct ssif_info *ssif_info = send_info;
unsigned long oflags, *flags;
if (!ssif_info->has_event_buffer)
return;
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
ssif_info->req_events = true;
ipmi_ssif_unlock_cond(ssif_info, flags);
}
/*
* Upper layer is changing the flag saying whether we need to request
* flags periodically or not.
*/
static void ssif_set_need_watch(void *send_info, unsigned int watch_mask)
{
struct ssif_info *ssif_info = send_info;
unsigned long oflags, *flags;
long timeout = 0;
if (watch_mask & IPMI_WATCH_MASK_CHECK_MESSAGES)
timeout = SSIF_WATCH_MSG_TIMEOUT;
else if (watch_mask)
timeout = SSIF_WATCH_WATCHDOG_TIMEOUT;
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
if (timeout != ssif_info->watch_timeout) {
ssif_info->watch_timeout = timeout;
if (ssif_info->watch_timeout)
mod_timer(&ssif_info->watch_timer,
jiffies + ssif_info->watch_timeout);
}
ipmi_ssif_unlock_cond(ssif_info, flags);
}
static int ssif_start_processing(void *send_info,
struct ipmi_smi *intf)
{
struct ssif_info *ssif_info = send_info;
ssif_info->intf = intf;
return 0;
}
#define MAX_SSIF_BMCS 4
static unsigned short addr[MAX_SSIF_BMCS];
static int num_addrs;
module_param_array(addr, ushort, &num_addrs, 0);
MODULE_PARM_DESC(addr, "The addresses to scan for IPMI BMCs on the SSIFs.");
static char *adapter_name[MAX_SSIF_BMCS];
static int num_adapter_names;
module_param_array(adapter_name, charp, &num_adapter_names, 0);
MODULE_PARM_DESC(adapter_name, "The string name of the I2C device that has the BMC. By default all devices are scanned.");
static int slave_addrs[MAX_SSIF_BMCS];
static int num_slave_addrs;
module_param_array(slave_addrs, int, &num_slave_addrs, 0);
MODULE_PARM_DESC(slave_addrs,
"The default IPMB slave address for the controller.");
static bool alerts_broken;
module_param(alerts_broken, bool, 0);
MODULE_PARM_DESC(alerts_broken, "Don't enable alerts for the controller.");
/*
* Bit 0 enables message debugging, bit 1 enables state debugging, and
* bit 2 enables timing debugging. This is an array indexed by
* interface number"
*/
static int dbg[MAX_SSIF_BMCS];
static int num_dbg;
module_param_array(dbg, int, &num_dbg, 0);
MODULE_PARM_DESC(dbg, "Turn on debugging.");
static bool ssif_dbg_probe;
module_param_named(dbg_probe, ssif_dbg_probe, bool, 0);
MODULE_PARM_DESC(dbg_probe, "Enable debugging of probing of adapters.");
static bool ssif_tryacpi = true;
module_param_named(tryacpi, ssif_tryacpi, bool, 0);
MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the default scan of the interfaces identified via ACPI");
static bool ssif_trydmi = true;
module_param_named(trydmi, ssif_trydmi, bool, 0);
MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the default scan of the interfaces identified via DMI (SMBIOS)");
static DEFINE_MUTEX(ssif_infos_mutex);
static LIST_HEAD(ssif_infos);
#define IPMI_SSIF_ATTR(name) \
static ssize_t ipmi_##name##_show(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{ \
struct ssif_info *ssif_info = dev_get_drvdata(dev); \
\
return sysfs_emit(buf, "%u\n", ssif_get_stat(ssif_info, name));\
} \
static DEVICE_ATTR(name, S_IRUGO, ipmi_##name##_show, NULL)
static ssize_t ipmi_type_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return sysfs_emit(buf, "ssif\n");
}
static DEVICE_ATTR(type, S_IRUGO, ipmi_type_show, NULL);
IPMI_SSIF_ATTR(sent_messages);
IPMI_SSIF_ATTR(sent_messages_parts);
IPMI_SSIF_ATTR(send_retries);
IPMI_SSIF_ATTR(send_errors);
IPMI_SSIF_ATTR(received_messages);
IPMI_SSIF_ATTR(received_message_parts);
IPMI_SSIF_ATTR(receive_retries);
IPMI_SSIF_ATTR(receive_errors);
IPMI_SSIF_ATTR(flag_fetches);
IPMI_SSIF_ATTR(hosed);
IPMI_SSIF_ATTR(events);
IPMI_SSIF_ATTR(watchdog_pretimeouts);
IPMI_SSIF_ATTR(alerts);
static struct attribute *ipmi_ssif_dev_attrs[] = {
&dev_attr_type.attr,
&dev_attr_sent_messages.attr,
&dev_attr_sent_messages_parts.attr,
&dev_attr_send_retries.attr,
&dev_attr_send_errors.attr,
&dev_attr_received_messages.attr,
&dev_attr_received_message_parts.attr,
&dev_attr_receive_retries.attr,
&dev_attr_receive_errors.attr,
&dev_attr_flag_fetches.attr,
&dev_attr_hosed.attr,
&dev_attr_events.attr,
&dev_attr_watchdog_pretimeouts.attr,
&dev_attr_alerts.attr,
NULL
};
static const struct attribute_group ipmi_ssif_dev_attr_group = {
.attrs = ipmi_ssif_dev_attrs,
};
static void shutdown_ssif(void *send_info)
{
struct ssif_info *ssif_info = send_info;
device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group);
dev_set_drvdata(&ssif_info->client->dev, NULL);
/* make sure the driver is not looking for flags any more. */
while (ssif_info->ssif_state != SSIF_NORMAL)
schedule_timeout(1);
ssif_info->stopping = true;
del_timer_sync(&ssif_info->watch_timer);
del_timer_sync(&ssif_info->retry_timer);
if (ssif_info->thread) {
complete(&ssif_info->wake_thread);
kthread_stop(ssif_info->thread);
}
}
static void ssif_remove(struct i2c_client *client)
{
struct ssif_info *ssif_info = i2c_get_clientdata(client);
struct ssif_addr_info *addr_info;
if (!ssif_info)
return;
/*
* After this point, we won't deliver anything asychronously
* to the message handler. We can unregister ourself.
*/
ipmi_unregister_smi(ssif_info->intf);
list_for_each_entry(addr_info, &ssif_infos, link) {
if (addr_info->client == client) {
addr_info->client = NULL;
break;
}
}
kfree(ssif_info);
}
static int read_response(struct i2c_client *client, unsigned char *resp)
{
int ret = -ENODEV, retry_cnt = SSIF_RECV_RETRIES;
while (retry_cnt > 0) {
ret = i2c_smbus_read_block_data(client, SSIF_IPMI_RESPONSE,
resp);
if (ret > 0)
break;
msleep(SSIF_MSG_MSEC);
retry_cnt--;
if (retry_cnt <= 0)
break;
}
return ret;
}
static int do_cmd(struct i2c_client *client, int len, unsigned char *msg,
int *resp_len, unsigned char *resp)
{
int retry_cnt;
int ret;
retry_cnt = SSIF_SEND_RETRIES;
retry1:
ret = i2c_smbus_write_block_data(client, SSIF_IPMI_REQUEST, len, msg);
if (ret) {
retry_cnt--;
if (retry_cnt > 0)
goto retry1;
return -ENODEV;
}
ret = read_response(client, resp);
if (ret > 0) {
/* Validate that the response is correct. */
if (ret < 3 ||
(resp[0] != (msg[0] | (1 << 2))) ||
(resp[1] != msg[1]))
ret = -EINVAL;
else if (ret > IPMI_MAX_MSG_LENGTH) {
ret = -E2BIG;
} else {
*resp_len = ret;
ret = 0;
}
}
return ret;
}
static int ssif_detect(struct i2c_client *client, struct i2c_board_info *info)
{
unsigned char *resp;
unsigned char msg[3];
int rv;
int len;
resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
if (!resp)
return -ENOMEM;
/* Do a Get Device ID command, since it is required. */
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_GET_DEVICE_ID_CMD;
rv = do_cmd(client, 2, msg, &len, resp);
if (rv)
rv = -ENODEV;
else
strscpy(info->type, DEVICE_NAME, I2C_NAME_SIZE);
kfree(resp);
return rv;
}
static int strcmp_nospace(char *s1, char *s2)
{
while (*s1 && *s2) {
while (isspace(*s1))
s1++;
while (isspace(*s2))
s2++;
if (*s1 > *s2)
return 1;
if (*s1 < *s2)
return -1;
s1++;
s2++;
}
return 0;
}
static struct ssif_addr_info *ssif_info_find(unsigned short addr,
char *adapter_name,
bool match_null_name)
{
struct ssif_addr_info *info, *found = NULL;
restart:
list_for_each_entry(info, &ssif_infos, link) {
if (info->binfo.addr == addr) {
if (info->addr_src == SI_SMBIOS)
info->adapter_name = kstrdup(adapter_name,
GFP_KERNEL);
if (info->adapter_name || adapter_name) {
if (!info->adapter_name != !adapter_name) {
/* One is NULL and one is not */
continue;
}
if (adapter_name &&
strcmp_nospace(info->adapter_name,
adapter_name))
/* Names do not match */
continue;
}
found = info;
break;
}
}
if (!found && match_null_name) {
/* Try to get an exact match first, then try with a NULL name */
adapter_name = NULL;
match_null_name = false;
goto restart;
}
return found;
}
static bool check_acpi(struct ssif_info *ssif_info, struct device *dev)
{
#ifdef CONFIG_ACPI
acpi_handle acpi_handle;
acpi_handle = ACPI_HANDLE(dev);
if (acpi_handle) {
ssif_info->addr_source = SI_ACPI;
ssif_info->addr_info.acpi_info.acpi_handle = acpi_handle;
request_module("acpi_ipmi");
return true;
}
#endif
return false;
}
static int find_slave_address(struct i2c_client *client, int slave_addr)
{
#ifdef CONFIG_IPMI_DMI_DECODE
if (!slave_addr)
slave_addr = ipmi_dmi_get_slave_addr(
SI_TYPE_INVALID,
i2c_adapter_id(client->adapter),
client->addr);
#endif
return slave_addr;
}
static int start_multipart_test(struct i2c_client *client,
unsigned char *msg, bool do_middle)
{
int retry_cnt = SSIF_SEND_RETRIES, ret;
retry_write:
ret = i2c_smbus_write_block_data(client,
SSIF_IPMI_MULTI_PART_REQUEST_START,
32, msg);
if (ret) {
retry_cnt--;
if (retry_cnt > 0)
goto retry_write;
dev_err(&client->dev, "Could not write multi-part start, though the BMC said it could handle it. Just limit sends to one part.\n");
return ret;
}
if (!do_middle)
return 0;
ret = i2c_smbus_write_block_data(client,
SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE,
32, msg + 32);
if (ret) {
dev_err(&client->dev, "Could not write multi-part middle, though the BMC said it could handle it. Just limit sends to one part.\n");
return ret;
}
return 0;
}
static void test_multipart_messages(struct i2c_client *client,
struct ssif_info *ssif_info,
unsigned char *resp)
{
unsigned char msg[65];
int ret;
bool do_middle;
if (ssif_info->max_xmit_msg_size <= 32)
return;
do_middle = ssif_info->max_xmit_msg_size > 63;
memset(msg, 0, sizeof(msg));
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_GET_DEVICE_ID_CMD;
/*
* The specification is all messed up dealing with sending
* multi-part messages. Per what the specification says, it
* is impossible to send a message that is a multiple of 32
* bytes, except for 32 itself. It talks about a "start"
* transaction (cmd=6) that must be 32 bytes, "middle"
* transaction (cmd=7) that must be 32 bytes, and an "end"
* transaction. The "end" transaction is shown as cmd=7 in
* the text, but if that's the case there is no way to
* differentiate between a middle and end part except the
* length being less than 32. But there is a table at the far
* end of the section (that I had never noticed until someone
* pointed it out to me) that mentions it as cmd=8.
*
* After some thought, I think the example is wrong and the
* end transaction should be cmd=8. But some systems don't
* implement cmd=8, they use a zero-length end transaction,
* even though that violates the SMBus specification.
*
* So, to work around this, this code tests if cmd=8 works.
* If it does, then we use that. If not, it tests zero-
* byte end transactions. If that works, good. If not,
* we only allow 63-byte transactions max.
*/
ret = start_multipart_test(client, msg, do_middle);
if (ret)
goto out_no_multi_part;
ret = i2c_smbus_write_block_data(client,
SSIF_IPMI_MULTI_PART_REQUEST_END,
1, msg + 64);
if (!ret)
ret = read_response(client, resp);
if (ret > 0) {
/* End transactions work, we are good. */
ssif_info->cmd8_works = true;
return;
}
ret = start_multipart_test(client, msg, do_middle);
if (ret) {
dev_err(&client->dev, "Second multipart test failed.\n");
goto out_no_multi_part;
}
ret = i2c_smbus_write_block_data(client,
SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE,
0, msg + 64);
if (!ret)
ret = read_response(client, resp);
if (ret > 0)
/* Zero-size end parts work, use those. */
return;
/* Limit to 63 bytes and use a short middle command to mark the end. */
if (ssif_info->max_xmit_msg_size > 63)
ssif_info->max_xmit_msg_size = 63;
return;
out_no_multi_part:
ssif_info->max_xmit_msg_size = 32;
return;
}
/*
* Global enables we care about.
*/
#define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \
IPMI_BMC_EVT_MSG_INTR)
static void ssif_remove_dup(struct i2c_client *client)
{
struct ssif_info *ssif_info = i2c_get_clientdata(client);
ipmi_unregister_smi(ssif_info->intf);
kfree(ssif_info);
}
static int ssif_add_infos(struct i2c_client *client)
{
struct ssif_addr_info *info;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->addr_src = SI_ACPI;
info->client = client;
info->adapter_name = kstrdup(client->adapter->name, GFP_KERNEL);
info->binfo.addr = client->addr;
list_add_tail(&info->link, &ssif_infos);
return 0;
}
/*
* Prefer ACPI over SMBIOS, if both are available.
* So if we get an ACPI interface and have already registered a SMBIOS
* interface at the same address, remove the SMBIOS and add the ACPI one.
*/
static int ssif_check_and_remove(struct i2c_client *client,
struct ssif_info *ssif_info)
{
struct ssif_addr_info *info;
list_for_each_entry(info, &ssif_infos, link) {
if (!info->client)
return 0;
if (!strcmp(info->adapter_name, client->adapter->name) &&
info->binfo.addr == client->addr) {
if (info->addr_src == SI_ACPI)
return -EEXIST;
if (ssif_info->addr_source == SI_ACPI &&
info->addr_src == SI_SMBIOS) {
dev_info(&client->dev,
"Removing %s-specified SSIF interface in favor of ACPI\n",
ipmi_addr_src_to_str(info->addr_src));
ssif_remove_dup(info->client);
return 0;
}
}
}
return 0;
}
static int ssif_probe(struct i2c_client *client)
{
unsigned char msg[3];
unsigned char *resp;
struct ssif_info *ssif_info;
int rv = 0;
int len = 0;
int i;
u8 slave_addr = 0;
struct ssif_addr_info *addr_info = NULL;
mutex_lock(&ssif_infos_mutex);
resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
if (!resp) {
mutex_unlock(&ssif_infos_mutex);
return -ENOMEM;
}
ssif_info = kzalloc(sizeof(*ssif_info), GFP_KERNEL);
if (!ssif_info) {
kfree(resp);
mutex_unlock(&ssif_infos_mutex);
return -ENOMEM;
}
if (!check_acpi(ssif_info, &client->dev)) {
addr_info = ssif_info_find(client->addr, client->adapter->name,
true);
if (!addr_info) {
/* Must have come in through sysfs. */
ssif_info->addr_source = SI_HOTMOD;
} else {
ssif_info->addr_source = addr_info->addr_src;
ssif_info->ssif_debug = addr_info->debug;
ssif_info->addr_info = addr_info->addr_info;
addr_info->client = client;
slave_addr = addr_info->slave_addr;
}
}
ssif_info->client = client;
i2c_set_clientdata(client, ssif_info);
rv = ssif_check_and_remove(client, ssif_info);
/* If rv is 0 and addr source is not SI_ACPI, continue probing */
if (!rv && ssif_info->addr_source == SI_ACPI) {
rv = ssif_add_infos(client);
if (rv) {
dev_err(&client->dev, "Out of memory!, exiting ..\n");
goto out;
}
} else if (rv) {
dev_err(&client->dev, "Not probing, Interface already present\n");
goto out;
}
slave_addr = find_slave_address(client, slave_addr);
dev_info(&client->dev,
"Trying %s-specified SSIF interface at i2c address 0x%x, adapter %s, slave address 0x%x\n",
ipmi_addr_src_to_str(ssif_info->addr_source),
client->addr, client->adapter->name, slave_addr);
/* Now check for system interface capabilities */
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD;
msg[2] = 0; /* SSIF */
rv = do_cmd(client, 3, msg, &len, resp);
if (!rv && (len >= 3) && (resp[2] == 0)) {
if (len < 7) {
if (ssif_dbg_probe)
dev_dbg(&ssif_info->client->dev,
"SSIF info too short: %d\n", len);
goto no_support;
}
/* Got a good SSIF response, handle it. */
ssif_info->max_xmit_msg_size = resp[5];
ssif_info->max_recv_msg_size = resp[6];
ssif_info->multi_support = (resp[4] >> 6) & 0x3;
ssif_info->supports_pec = (resp[4] >> 3) & 0x1;
/* Sanitize the data */
switch (ssif_info->multi_support) {
case SSIF_NO_MULTI:
if (ssif_info->max_xmit_msg_size > 32)
ssif_info->max_xmit_msg_size = 32;
if (ssif_info->max_recv_msg_size > 32)
ssif_info->max_recv_msg_size = 32;
break;
case SSIF_MULTI_2_PART:
if (ssif_info->max_xmit_msg_size > 63)
ssif_info->max_xmit_msg_size = 63;
if (ssif_info->max_recv_msg_size > 62)
ssif_info->max_recv_msg_size = 62;
break;
case SSIF_MULTI_n_PART:
/* We take whatever size given, but do some testing. */
break;
default:
/* Data is not sane, just give up. */
goto no_support;
}
} else {
no_support:
/* Assume no multi-part or PEC support */
dev_info(&ssif_info->client->dev,
"Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n",
rv, len, resp[2]);
ssif_info->max_xmit_msg_size = 32;
ssif_info->max_recv_msg_size = 32;
ssif_info->multi_support = SSIF_NO_MULTI;
ssif_info->supports_pec = 0;
}
test_multipart_messages(client, ssif_info, resp);
/* Make sure the NMI timeout is cleared. */
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
msg[2] = WDT_PRE_TIMEOUT_INT;
rv = do_cmd(client, 3, msg, &len, resp);
if (rv || (len < 3) || (resp[2] != 0))
dev_warn(&ssif_info->client->dev,
"Unable to clear message flags: %d %d %2.2x\n",
rv, len, resp[2]);
/* Attempt to enable the event buffer. */
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
rv = do_cmd(client, 2, msg, &len, resp);
if (rv || (len < 4) || (resp[2] != 0)) {
dev_warn(&ssif_info->client->dev,
"Error getting global enables: %d %d %2.2x\n",
rv, len, resp[2]);
rv = 0; /* Not fatal */
goto found;
}
ssif_info->global_enables = resp[3];
if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) {
ssif_info->has_event_buffer = true;
/* buffer is already enabled, nothing to do. */
goto found;
}
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF;
rv = do_cmd(client, 3, msg, &len, resp);
if (rv || (len < 2)) {
dev_warn(&ssif_info->client->dev,
"Error setting global enables: %d %d %2.2x\n",
rv, len, resp[2]);
rv = 0; /* Not fatal */
goto found;
}
if (resp[2] == 0) {
/* A successful return means the event buffer is supported. */
ssif_info->has_event_buffer = true;
ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF;
}
/* Some systems don't behave well if you enable alerts. */
if (alerts_broken)
goto found;
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR;
rv = do_cmd(client, 3, msg, &len, resp);
if (rv || (len < 2)) {
dev_warn(&ssif_info->client->dev,
"Error setting global enables: %d %d %2.2x\n",
rv, len, resp[2]);
rv = 0; /* Not fatal */
goto found;
}
if (resp[2] == 0) {
/* A successful return means the alert is supported. */
ssif_info->supports_alert = true;
ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR;
}
found:
if (ssif_dbg_probe) {
dev_dbg(&ssif_info->client->dev,
"%s: i2c_probe found device at i2c address %x\n",
__func__, client->addr);
}
spin_lock_init(&ssif_info->lock);
ssif_info->ssif_state = SSIF_NORMAL;
timer_setup(&ssif_info->retry_timer, retry_timeout, 0);
timer_setup(&ssif_info->watch_timer, watch_timeout, 0);
for (i = 0; i < SSIF_NUM_STATS; i++)
atomic_set(&ssif_info->stats[i], 0);
if (ssif_info->supports_pec)
ssif_info->client->flags |= I2C_CLIENT_PEC;
ssif_info->handlers.owner = THIS_MODULE;
ssif_info->handlers.start_processing = ssif_start_processing;
ssif_info->handlers.shutdown = shutdown_ssif;
ssif_info->handlers.get_smi_info = get_smi_info;
ssif_info->handlers.sender = sender;
ssif_info->handlers.request_events = request_events;
ssif_info->handlers.set_need_watch = ssif_set_need_watch;
{
unsigned int thread_num;
thread_num = ((i2c_adapter_id(ssif_info->client->adapter)
<< 8) |
ssif_info->client->addr);
init_completion(&ssif_info->wake_thread);
ssif_info->thread = kthread_run(ipmi_ssif_thread, ssif_info,
"kssif%4.4x", thread_num);
if (IS_ERR(ssif_info->thread)) {
rv = PTR_ERR(ssif_info->thread);
dev_notice(&ssif_info->client->dev,
"Could not start kernel thread: error %d\n",
rv);
goto out;
}
}
dev_set_drvdata(&ssif_info->client->dev, ssif_info);
rv = device_add_group(&ssif_info->client->dev,
&ipmi_ssif_dev_attr_group);
if (rv) {
dev_err(&ssif_info->client->dev,
"Unable to add device attributes: error %d\n",
rv);
goto out;
}
rv = ipmi_register_smi(&ssif_info->handlers,
ssif_info,
&ssif_info->client->dev,
slave_addr);
if (rv) {
dev_err(&ssif_info->client->dev,
"Unable to register device: error %d\n", rv);
goto out_remove_attr;
}
out:
if (rv) {
if (addr_info)
addr_info->client = NULL;
dev_err(&ssif_info->client->dev,
"Unable to start IPMI SSIF: %d\n", rv);
i2c_set_clientdata(client, NULL);
kfree(ssif_info);
}
kfree(resp);
mutex_unlock(&ssif_infos_mutex);
return rv;
out_remove_attr:
device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group);
dev_set_drvdata(&ssif_info->client->dev, NULL);
goto out;
}
static int new_ssif_client(int addr, char *adapter_name,
int debug, int slave_addr,
enum ipmi_addr_src addr_src,
struct device *dev)
{
struct ssif_addr_info *addr_info;
int rv = 0;
mutex_lock(&ssif_infos_mutex);
if (ssif_info_find(addr, adapter_name, false)) {
rv = -EEXIST;
goto out_unlock;
}
addr_info = kzalloc(sizeof(*addr_info), GFP_KERNEL);
if (!addr_info) {
rv = -ENOMEM;
goto out_unlock;
}
if (adapter_name) {
addr_info->adapter_name = kstrdup(adapter_name, GFP_KERNEL);
if (!addr_info->adapter_name) {
kfree(addr_info);
rv = -ENOMEM;
goto out_unlock;
}
}
strncpy(addr_info->binfo.type, DEVICE_NAME,
sizeof(addr_info->binfo.type));
addr_info->binfo.addr = addr;
addr_info->binfo.platform_data = addr_info;
addr_info->debug = debug;
addr_info->slave_addr = slave_addr;
addr_info->addr_src = addr_src;
addr_info->dev = dev;
if (dev)
dev_set_drvdata(dev, addr_info);
list_add_tail(&addr_info->link, &ssif_infos);
/* Address list will get it */
out_unlock:
mutex_unlock(&ssif_infos_mutex);
return rv;
}
static void free_ssif_clients(void)
{
struct ssif_addr_info *info, *tmp;
mutex_lock(&ssif_infos_mutex);
list_for_each_entry_safe(info, tmp, &ssif_infos, link) {
list_del(&info->link);
kfree(info->adapter_name);
kfree(info);
}
mutex_unlock(&ssif_infos_mutex);
}
static unsigned short *ssif_address_list(void)
{
struct ssif_addr_info *info;
unsigned int count = 0, i = 0;
unsigned short *address_list;
list_for_each_entry(info, &ssif_infos, link)
count++;
address_list = kcalloc(count + 1, sizeof(*address_list),
GFP_KERNEL);
if (!address_list)
return NULL;
list_for_each_entry(info, &ssif_infos, link) {
unsigned short addr = info->binfo.addr;
int j;
for (j = 0; j < i; j++) {
if (address_list[j] == addr)
/* Found a dup. */
break;
}
if (j == i) /* Didn't find it in the list. */
address_list[i++] = addr;
}
address_list[i] = I2C_CLIENT_END;
return address_list;
}
#ifdef CONFIG_ACPI
static const struct acpi_device_id ssif_acpi_match[] = {
{ "IPI0001", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, ssif_acpi_match);
#endif
#ifdef CONFIG_DMI
static int dmi_ipmi_probe(struct platform_device *pdev)
{
u8 slave_addr = 0;
u16 i2c_addr;
int rv;
if (!ssif_trydmi)
return -ENODEV;
rv = device_property_read_u16(&pdev->dev, "i2c-addr", &i2c_addr);
if (rv) {
dev_warn(&pdev->dev, "No i2c-addr property\n");
return -ENODEV;
}
rv = device_property_read_u8(&pdev->dev, "slave-addr", &slave_addr);
if (rv)
slave_addr = 0x20;
return new_ssif_client(i2c_addr, NULL, 0,
slave_addr, SI_SMBIOS, &pdev->dev);
}
#else
static int dmi_ipmi_probe(struct platform_device *pdev)
{
return -ENODEV;
}
#endif
static const struct i2c_device_id ssif_id[] = {
{ DEVICE_NAME, 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ssif_id);
static struct i2c_driver ssif_i2c_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = DEVICE_NAME
},
.probe_new = ssif_probe,
.remove = ssif_remove,
.alert = ssif_alert,
.id_table = ssif_id,
.detect = ssif_detect
};
static int ssif_platform_probe(struct platform_device *dev)
{
return dmi_ipmi_probe(dev);
}
static int ssif_platform_remove(struct platform_device *dev)
{
struct ssif_addr_info *addr_info = dev_get_drvdata(&dev->dev);
if (!addr_info)
return 0;
mutex_lock(&ssif_infos_mutex);
list_del(&addr_info->link);
kfree(addr_info);
mutex_unlock(&ssif_infos_mutex);
return 0;
}
static const struct platform_device_id ssif_plat_ids[] = {
{ "dmi-ipmi-ssif", 0 },
{ }
};
static struct platform_driver ipmi_driver = {
.driver = {
.name = DEVICE_NAME,
},
.probe = ssif_platform_probe,
.remove = ssif_platform_remove,
.id_table = ssif_plat_ids
};
static int __init init_ipmi_ssif(void)
{
int i;
int rv;
if (initialized)
return 0;
pr_info("IPMI SSIF Interface driver\n");
/* build list for i2c from addr list */
for (i = 0; i < num_addrs; i++) {
rv = new_ssif_client(addr[i], adapter_name[i],
dbg[i], slave_addrs[i],
SI_HARDCODED, NULL);
if (rv)
pr_err("Couldn't add hardcoded device at addr 0x%x\n",
addr[i]);
}
if (ssif_tryacpi)
ssif_i2c_driver.driver.acpi_match_table =
ACPI_PTR(ssif_acpi_match);
if (ssif_trydmi) {
rv = platform_driver_register(&ipmi_driver);
if (rv)
pr_err("Unable to register driver: %d\n", rv);
else
platform_registered = true;
}
ssif_i2c_driver.address_list = ssif_address_list();
rv = i2c_add_driver(&ssif_i2c_driver);
if (!rv)
initialized = true;
return rv;
}
module_init(init_ipmi_ssif);
static void __exit cleanup_ipmi_ssif(void)
{
if (!initialized)
return;
initialized = false;
i2c_del_driver(&ssif_i2c_driver);
kfree(ssif_i2c_driver.address_list);
if (ssif_trydmi && platform_registered)
platform_driver_unregister(&ipmi_driver);
free_ssif_clients();
}
module_exit(cleanup_ipmi_ssif);
MODULE_ALIAS("platform:dmi-ipmi-ssif");
MODULE_AUTHOR("Todd C Davis <todd.c.davis@intel.com>, Corey Minyard <minyard@acm.org>");
MODULE_DESCRIPTION("IPMI driver for management controllers on a SMBus");
MODULE_LICENSE("GPL");